Recomposition of desktop clears the user setting when you use persistent disks
I'm in test phase of VMWare View, and I created my server administrator display and a server of composer. I was able to create jobs with the composer. Assignment of a user on the desktop and user can connect through the Client view. When the user logs on, they get a C: (Local disk) drive, drive D: (PersistentDataDisk) and a drive E: (SystemDisposableDisk). The user can create shortcuts and install their profiles of Lotus Notes and everything works great. The user can disconnect and reconnect and stay all settings. If I recompose the office by changing the initial snapshot used to create the office and place it on the office compound it clears all the settings of the user.
I want to know if this is normal behavior or if the settings of users should be "replication" to the PersistentDataDisk and reloaded when the user connects again. I want to be able to have users customize their desk tops and others for their taste but have the ability to add modifications to the software via the Redial feature.
Thanks in advance for your help.
Josh
A persistent record of the composer view should not be affected by a restructuring or a refresh operation. Have you checked that the profile is being created on the disk D:\ sucesfully? I remember problems in the past, if the user was connected to the image of the mother and then the profile remained on the C:\ drive instead of passing to D:\.
Tags: VMware
Similar Questions
-
How can I clear the browser history when you use the custom settings for history?
When my history option is set to "Use the custom settings for history", the options page has no link to "clear recent history". There was formerly a menu option, but that seems to be gone now with Firefox 29. Is my only option to access the dialog box, clear the history all to change the historical option to history to remember and then change it back? Is there another way to access the option erase history all?
I think you can get the menu bar by pressing the ALT key. If you want to return permanently, click View > toolbars and check menu bar.
-
The power setting when you use HDMI
Hello.
I use a Y730 with Vista 32 bit. I play a mpg4 using Quicktime. My output is my High Def TV on the HDMI output. I have the audio and video on the TV without any problems. Computer power settings are updated never stop.
While watching, the screen turns off after 10 or 15 minutes, I love (like 5 minutes or less), then after 2 minutes the computer stops playing the movie as if it is entered in mode 'sleep'. If I move the mouse between the screen off and the 'sleep', he continues to play. It's very annoying to do every 10 to 15 minutes.
How can I pay for orders of power/energy to have the monitor off, but the file still to play.
Thank you
Carl
@yigit if you click on the System tab, you can change other settings. These parameters, it must change and set it to NEVER. I suggest to change the plan of 'high performance '.
-
Backup Windows XP does not seem to be clear the attribute archive when you perform a normal backup.
I do a backup of the 'Normal' at the beginning of the month. Then, at the end of the first week, I do a "Differential" backup (using the same "backup job" but change to type "Incremental".)
Well the difference is huge and to study, I see that a lot of files that I don't know that I didn't take the week since the 'Normal' backup have the Archive attribute set.
Is the 'Normal' compensation not the bit mode backup of archive? Another thing would be randomly set the attributes to archive? Is there a ghost in the machine? Inquiring minds want to know.
Hello
Differential backup marks files as having been backed up (in other words, archive attribute is not cleared). This is normal.
For more information please visit:
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/types_of_backup.mspx?mfr=true
http://msdn.Microsoft.com/en-us/library/aa174458 (SQL.80) .aspx
http://msdn.Microsoft.com/en-us/library/ms345448.aspxThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
How can I disable the mouse pad when you use a mouse plug-and-play?
How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.
Hello
Check with support of the manufacturer system, documentation online or forums that there is probably
Shortcut keys that enable and disable the touchpad functions.Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
and some come with a utility that loads in the Notification area next to the clock in the bottom right.==========================================
If necessary: (make sure that you have restarted at least once, if the above did not work)
Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
on the TouchPad and UNINSTALL.Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET
This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.
The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
http://support.Microsoft.com/kb/310575Then go to the system manufacturer's website and get the latest touchpad drivers.
Download - SAVE - go to where you put it-click on - RUN AS ADMIN.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Pages automatically reformats to the correct size when you use Folio Builder or what I have to do format pages iPad, for example, in the placed InDesign document in place from the beginning?
Transferred to DPS forum.
You must configure the pages of appropriately for the target device. For iPad, it is 1024 x 768.
-
What are the supported items when you use multiple suites?
Hi all
I created a plugin that sends the current path to a url,
his work very well with debugging in Visual studio 2005 and then it is added to the Adobe Illustrator work only once.
Its transmission, the path is that for a single file. While I was trying for the second time its does not work
I use more costumes in my plugin
AIDocumentSuite
AIFilePathSuite
AIActionManagerSuite
AIUnicodeStringSuite
AIURLSuite
I use the "'AIURLSuite ' to call the url and calls the url several times while its used only and its only works once with multiple suites. "
What are the supported items when you use multiple suites? It is necessary to release all the variables and the suites after completing the task?
Should they come out in the same order in which they are acquired?
Thanks in advance
Farida kaid
As far as I know, there is nothing forcing you to unleash in the same or in front of the order in which you have acquired in. Frankly, in our plugin gain us once, then lock the plugin to prevent it from unloading and don't release suites when we finished. That said, as far as I know, you should be fine to learn/work/output several times.
-
Problem with the format of the values in the command prompt (when you use multiple values)
Hi all
I have problem with the format of the values in the command prompt when you use multiple values.
Value is year (2009) and when I use it in the drop-down list that is formatted, all right, as 2009, but when I use several values I get number as 2009,00. I put in year column format number with 0 decimal places and save by default in the year column. Year is formatted well anywhere in the query, such as 2009. Why is - what happens at the command prompt when you choose multiple values in prompt dashboard?
Thank youI think the YEAR Data Type could be defined DOUBLE RPD.
Use the CAST function in the formula (fx) and the output from test.
CAST (INT YEAR)
Hope, it will help you.
-
Error message "an error the system cannot find the file specified" when you use Bitlocker
Original title: Bitlocker to go not accessible by car usb
Here's the short of it: I decided to use Bitlocker To Go on my USB drive, and while he was to encrypt the drive I plugged a USB DVD - RW drive (it
s a netbook) and then I got an error message in the Bitlocker program that says "an error the system cannot find the file specified." I closed the error message and open the Bitlocker Unlock program, put my password and press on unlock and now it only that sit there and spin and the light flashes on my Batman of Seagate HARD drive as it is accessed. The internal data of the car do not make the same sound, as he did while he was being... just encryption sounds like there are in an infinite loop. The disc is good and has no errors, and I scanned with SeaTools. I have a lot of important data on this drive, and I really don't want to lose anything. Help!
Hello 5thgear,
Thank you for the question!
I'm sorry to know that have problems you with Bitlocker. I get it right you get an error message "an error the system cannot find the file specified" when you run the bitlocker encryption.
I need to ask you a question to help you best.
Were there any changes (hardware or software) to the computer before the show?
Click on the link below.
Answer to us if you are having problems with bitlocker or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
How to change the imbedding option when you use the command set?
When I try to place any Illustrator (latest version) its automatically embedded file. Is it possible to change this, the file will be linked and not integrated?
yarontm,
Second action (I posted this an hour ago, or rather it could not display for some or no reason):
Are you DoubleClicking the file? If you are, try just by clicking on it.
If you are just by clicking on it, and it includes only, something is wrong.
The following is a general list of things you can try when the question is not in a specific file (you tried/made some of them already). 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.
(1) close Illy and open again.
(2) restart the computer (you can do that up to 3 times);
(3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);
4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible);
5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);
Even worse, you can:
(6) uninstall, run the vacuum cleaner tool (if you have CS3/CS4/CS5/CS6/CC), and then reinstall.
-
Have the intermittent connection when you use WiFi and conflict error IP address when using Ethernet
I have intermittent problems with my wireless internet connection. I contacted the ISP and they analyzed the configuration of the modem-router, changed some and told me to try to reconnect. I try again and the connection is OK. The ISP has caress each other on the back and sent me on my merry way not-so-small. Problem is at an unpredictable time, problems (do) happen.
Usually the failure scenario does not have a huge problem - plus one
gene as a problem. I just keep trying to connect through Windows
Network and sharing Center, and possibly the connection is made. But in some cases, time is critical; I eventually lose 10 to 20 minutes of typing-search-typing-correction-etc in a web form when the connection disappears before making a SHIPMENT. (Some time, after the failed wireless and re - connect, I was actually able to recover pretty quickly that the site has not been exceeded me.) So in this scenario I can't lost any strike.)I would like to connect my pc to the internet via an ethernet cable
the modem-router. I could take this approach right after the wireless
connection failed. Or in a preventive way, when I know I'll be typing-
mode of research-type-fixed-etc and I want to be really sure. When I tried this, I get the error "Windows has detected an IP address conflict.What I do at this point to get around the Wi - Fi connection and connect through the Ethernet cable?
The topic is edited for clarity of the moderator.* *.
[Original title: LOST INTERMITTENT WIRELESS INTERNET CONNECTION]
It is not clear what parameters your ISP technology management may have changed on your modem/router. As a general rule, the ISP concerned the link between their server and your modem, but any fiddling with settings that control this link will not effect either on the link between your computer and the modem/router.
If you still haven't reset your router to its default settings, do not unless you know the necessary internal router settings for you connect to your ISP. If you have a cable Internet connection, the default settings may work OK, but if you have a DSL, they probably won't.
You should not get this "IP address conflict" error when you connect the Ethernet cable. Follow these steps:
Open the "network and sharing Center" and then click on "change adapter settings". You should see an icon for your wireless network adapter and an icon for your 'connection to the Local network' (your Ethernet connection).
- Right click on each of the icons, and select 'properties '.
- There should be a list titled "this connection uses the following items." In this list, select "Internet Protocol Version 4 (TCP/IP)" and then click "Properties".
- The radio buttons to "Obtain an IP address automatically" and "Obtain DNS server address automatically" should both selected. If this is NOT the case, do so and OK your way out. Furthermore, cancel your way.
If a card has been configured to use a specific IP address, your "IP address conflict" should now be fixed (you may need to restart the computer for the change to take effect).
If cards were already configured to obtain its IP address automatically, the problem lies in the configuration of your router. You will need to access the router's Web utility to study and make changes. To help you provide the brand and model of the router of the label on the back or the bottom. Also do the following to a time where you have an Internet connection:
Open a command prompt window (type cmd in the search box and press enter)
- In the black command prompt window, type the following command, and press ENTER after each line
ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".
Notepad '% userprofile%\Desktop\ipinfo.txt '.
output
- In the opened Notepad window, click Edit > select all (or press CTRL + A) and then click Edit > copy (or press Ctrl + C)
- In the body of your Question, right-click > paste (or press CTRL + V) the data of the Notepad window
- Close Notepad and remove ipinfo.txt from your desktop
-
Upgrade Windows 7 Home Premium to professional.
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
Why the fonts blurry when you use remote Windows for ofc computer access from home?
I use Windows remote access to my desktop (Windows 7) from home (also Windows 7). The fonts are blurry. When I use the remote Windows to access Outlook only, the fonts are clear and sharp.
Hello
Please try these:
1. click on start, type Remote Desktop connection.
2 open remote desktop connection, click options.
3. click on the tab advanced; Put a check mark on the font smoothing.
4 if it is already checked, then uncheck the font smoothing -
How to change the search engine when you use the functionality of Firefox Home button Search?
In Firefox itself, I have configured duckduckgo as my default search provider.
But when I use the host Firefox search button it is always defined on google and I don't see any possibility to change that?
I love the Firefox Home button Search (or whatever we call it) otherwise, but it's annoying that it does not use the default Firefox.
I use the Google Launcher now.
Hi mrt181, it is planned to use the same search engine as in firefox - however, there is a bug at the moment, so it does not apply in all situations.
usually, it will be enough to change the default engine in firefox back once to work around the problem in the search widget and get the same as set in the browser search provider. -
How to avoid changes to the NEF file when you use Camera Raw?
He does not have to happen, but now, when I edit a NAVE in Camera RAW file, then save it as jpg in PS6 file NAVE is also changed, so I can't undo my changes here. How to stop this change to the NEF file?
And if you use the bridge to eliminate all changes in the NEF file you made in ACR and return to its state choose Edition > develop settings > clear settings. (You'll notice that the marker of this image in Bridge has been removed, confirming the fact that the NAVE is back to change.)
Maybe you are looking for
-
8440p XS181PA Windows 7 Professional 64 - USB3.0 drivers?
Hello I have a 8440p, model number here: XS181PA with Windows 7 Professional 64 bit. I bought a USB3.0 hub in the form of an Express Card 54mm. The driver manager detects the device as "Universal Serial Bus (USB) controller. When I updated the driver
-
Scanner does not work on HP Officejet 6500 Wireless with MacBook Pro
I have the all-in-one Officejet 6500 wireless and print fine but the scanner does not work even after the implementation of suggestions on the Web site. I recently installed Mac OS x 10.6.8 but I had the same problem with the previous software. Sca
-
LaserJet M1217 nfw: laserjet m1217 nfw for window 10
Yesterday I installed Windows 10 and I can no longer print anything with my printer. I tried to scan doctor and HP Support Assistant, nothing seems to solve the problem. Any suggestions? Thank you
-
How do I activate the acceleration Directdraw Direct3d acceleration AGp texture acceleration
Please help I can not turn on direct3d ------------------ Information System------------------Time of this report: 01 19, 2015, 04:35:02Computer name: RENON-HPOperating system: Windows 7 Home Basic 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7
-
My screensaver turns black and white should be in color
When I put the screen saver after a while instead of the color is black and white, why never had this happen before