Recon trust with AD

Similar Questions

• The implementation of generator of random when password the user is created using recon trust in OIM 11 g R2 PS3

  Hello

  Event handlers in the process pre don t work with recon trust in OIM 11 g R2 PS3. In our scenario, we want to create the user using recon trust and need the password to be generated randomly for the user created through trust recon.

  What is the workaround that can be implemented.

  Help, please.

  Thank you

  Sahana

  Post event handler process on the user object to create a new action. Set the order after the current ootb event handler that generates the default.

  -Kevin

• Approvals for recon trust in OIM 11 g 2

  People,

  I have a requirement to send create trusts from the user to a user during the reconciliation of trust of a file. Is it possible to achieve. ?

  That is to say we do not want to directly create users to IOM on recon trust rather send for approval and after successful approval the user must be created in the IOM.

  Concerning

  Isn't that the recon trust device?  I guess all you can do is to remove the rule to create a user when no match not found on the reconciliation rule.  Then force someone to handle these types of events.  I don't think you can have an approval process on the user create a recon trust.  You can not access even the events of preprocessor on the user.

  Hand, the only option I can think of is instead of making reconciliation, uses the user to create and edit API with custom code.  Then you can put an approval in place.

  -Kevin

• Password when reconciling trust with AD

  Hi all
  
  I work with IDM 11 g (11g FMW) connector AD MSFT_AD_Base_9.1.1.7.0.
  
  I have a question which, during the reconciliation of confidence of users of the AD to IDM IDM password is changed and then I have to reset the password to make it able to connect in IDM user.
  
  Is it normal that the password should be replaced during the reconciliation of trust?
  How can it be prevented I want same password for the next user in the IDM advertising.
  
  I have 15000 more users so you can imagine what will happen if all passwords are required to be reset...
  
  Thank you...

  There is no way to retrieve the password in AD. So even if it is approved, you will retrieve only the values of the target of the AD that are needed to complete the user profile of the IOM to create users. The only way to propagate the password of IOM pub is with AD password synchronization, but this happens only when the user resets his AD password is that she pushed to IOM. Only at this point is the code able to know what is the password. If you can just use the java code to enter the password in the AD, then it would be a very unstable system. You can always force a user to change their password during the connection when a recon trust is done and a new user is created in the IOM. You should also have completed recon AD target for bringing the resource on their profile.

  Don't forget, you'll need a phase of integration that makes all recons confidence and targets. You will not want to notify when integrating, but once completed this phase, you would like to inform all of your users to connect and register, which will then push their password for the AD, but don't change anything, until they register.

  -Kevin

• Allow a user disabled by a recon trust

  We run a recon trust every day with our HR system. When an employee terminates, they supply cancelled and put in a disabled state. However, we have situations sometimes the employee is rehired. The recon trust aligns correctly the user re-engaged in the file of human resources with the existing record to the IOM, but it fails with the following error in the reconciliation Manager:
  
  Keyword Error: DOBJ. GRP. USR_STATUS_ERROR
  Description: The target user is disabled or deleted.
  
  Is it possible to allow the user somehow for the recon event can complement and the employee can be activated?

  If the status is at the origin of the questions, I suggest the following:

  1. create a UDF of this status.
  2 Add the field looking for the USR form triggers.
  3 create an adapter that verifies the current (old value) and the new (incoming Recon) value. Based on these values, you will need to use the disableUser or enableUser API.
  4 create an adapter of the entity that verifies the value of users for this field when inserting back so that if the user should be turned off during the initial load, it will disable the user when finished.
  5 Add the adapter in step 3 to the process definition of provisionign of Xellerate user with the name of the task specified in the list of choices.

  Now whenever this field changes, you can enable and disable the user with an adapter, and since it is a reliable source, the value will trigger change whenever it is updated.

  -Kevin

• Windows 7 computers lose trust with the domain.

  Windows 7 computers lose trust with the domain.  I need one real trouble other than a work around.  My computer Windows XP are very good.  I have to update my domain controller?

  I have remove the field and re-add-the computers throughout the day.  I have a hospital with an increasing amount of Windows 7 computers and my technicians wasting time doing this?  Anyone has any ideas or can help with this?
  Is there a setting on the domain controller that can be activated for this problem?

  Hi, Koldy,

  Try the solutions proposed here:

  Computer remote windows 7 has lost the trust relationship with the domain

  http://social.technet.Microsoft.com/forums/en-us/winserverDS/thread/2d726215-4B97-4e64-9657-98dc106dffbd

  The trust relationship between this workstation and the primary domain failed - Windows 7 Enterprise joining the 2008 domain, error 5722

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/8155d5ea-a5c2-4306-8d2b-be3464234460

  For more assistance, ask your question to the TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Recon trust cannot insert the RA_XELLERATEUSER2 due to RA_XELLERATEUSER2

  Hi all
  
  I saw a previous assignment for this error, but I still don't understand why I get this error. OIM 11 G and doiing a recon trust to the user Xellerate resource.
  
  I OrgName mapped on behalf of the Organization and set it to "Xellerate users" in the reconstruction plan. do not know what is happening.
  
  
  Thanks in advance.
  Fred

  You can use a more processReconciliationEvent after the call to the createReconciliationEvent API.

  Let me know the results.

• Recon trust

  Whenever I run AD recon trusted user, all users who are in AD and not in IOM is created in IOM, which is as expected. But for all these users, resource profile shows that users have access to AD.
  
  That should come out connector AD or miss me something?

  This is the expected behavior, recon trust against AD so the data of the user are used to trigger the creation of a user of the IOM. If you want to bind the new user of the IOM to their AD resource, you need to run a unapproved recon as well and it will find the AD user and the corresponding IOM user and link the two. For each user, you will see while they attached AD resource.

• Recon trust and Disapled account

  
  Hi gurus,

  I have a strange symptoms resembles bug.

  Before going for SR, I would like to share with you and ask your knowledge and your experiences.

  Here are...

  1. create AAA used in the HR system.

  2. create a recon IOM thru Trusted user. = > AAA user is created in the IOM.

  3 assign a role to this user. = > user AAA have role BBB

  4.A political CCC is already ready to available for user with the BBB DDD target role.

  5. run Evaluate user policy = > user AAA have account for DDD. (and right assoiated with it)

  6 remove the role of user AAA = BBB > AAA user have more role BBB. But even when user AAA account to DDD.

  7. perform Evaluate user policy. = > of AAA DDD disabled user account. (defined in the strategy of CCC)

  so far so good.

  8. change AAA used in the HR system.

  9. run Trusted Recon. = > IOM AAA user is modified aso.

  * But here the account disabled for DDD is changed to on.

  Can anyone help with this?

  Why does this happen?

  Why the disabled account is enabled with Trusted Recon?

  Thanks in advance.

  dongsu.

  Yes, the name of the property is to enable disabled instances of resource when a user is enabled

  
  

  ~ J

• Recon trust AD didn't write not shooting data in USR table and console UI.

  Hello

  When we AD Trusted reconciliation, IOM pulls all the information and write it in the UD_ADUSER table, but does not fill in USR table and the IOM UI console.

  I checked the Lookup.ActiveDirectory.UM.ReconAttrMap.Trusted and the Lookup.ActiveDirectory.UM.ReconAttrMap, these searches have all mappings.

  Should I check?

  any help would be appreicated.

  Thank you

  I refreshed the reconciliation profile by clicking on the button create a profile reconciliation in reconciliation of the Console Design tab.

  After that I may jobs recon... it perfectly pulled all the attributes.

  Thank you

• Multiple failures for the new certificates of trust with ORA-28857

  We are seeing problems with the work of the API using UTL_HTTP on SSL start to fail with the new approved certificates. Just import these certificates in the portfolio results in a ORA-28857 and a corrupt portfolio. We use 11.2.0.1.  3 channels of trust do not now have. Include cert (fire hydrant and godaddy certs) chains of

  
  

  https://API.Betfair.com

  https://www.FlipKey.com/

  I had a support call open for the last month with no resolution.

  If anyone has the possibilities of solutions / solutions might just save me a few sleepless nights. The feature of our products is dying because of this problem!

  
  

  If the certificates are SHA2, they will not work in 11201... they are entirely supported 11203 upward.

• I was able to do DBUM can recon trust without user login mapping

  Hi all
  
  
  Is it possible to do dbum approved reocon without mapping field User Login? , Because it's going to create automatically using the handler to process mail.
  
  I am able to recon when I map userlogin otherwise not. But my need is userlogin shud create automatically. How can I achieve this
  
  
  Any suggestions?
  
  
  Kind regards
  
  user7609

  This approach will work very well with first recon time (new user) and you do not need to do anything extra.
  But, the problem occurs in the case of update (next time the same user recon). As the userlogin is mapped with the source to the target and you changed using the process post event handler. Thus, the same record, it will consider also editable and it will again try to update the connection of the current user. Yes, you can call your handler on update as well. While it will update again to the previous. It will be worst approach. beacause, it will treat the same record always.

  Again, I suggest. Better go for the transformation. which will serve your purpose. In this case you need not map the connection of the user to the source of confidence. transformation class will generate the user login during the prior insertion.

• Recon Trusted reconciliation event and target advertising stuck in the State of data received

  Hello

  Approved AD recon target job running successfully, but events are stuck in the data received State-is not related to any user.

  It happens for a particular job only.

  Because most users are not the IOM. How to remedy this situation.

  Any help would be appreicated.

  Thank you

  Your error says that your storage space is full and is not able to extend the table space. u can try pls check-in
  IAMEXT_OIM. Table IDX_RECON_HISTORY or delete some data after backup?

• alternative to bulk recon trust

  Hi all
  
  We are working on a project of oim & oam, which will be used by a large number (6 digits) of users currently present, in which oam will serve the oid of its repository. our main problem is how to keep all the users of our system, in other words, create in IOM, which will then create in oid. a normal trust reconciliation will take a very long time, so we are looking for another way to do it, any ideas?
  
  I'd be happy if someone could help.

  Use utility of loading of bulk for IOM. Should not be a question for the Forum.

  http://download.Oracle.com/docs/CD/E14899_01/doc.9102/e14763/bulkload.htm

  Thank you

  Sunny

• Post-processing of handler for recon trust - 11 G Release2

  Hi all
  
  I am disable a user in post process eventhandler bulkExecution method. When the event handler is triggered only the user is already created IOM? Change the user already created? Or all the changes made to any user for the orchestration process are engaged in the development... Can someone tell me how things happens on the side db?
  
  Thanks in advance
  BR
  Aliye

  Handler to process post is raised after the user created in the database. You can check by retrieving the attribute usr_key of the user profile that is generated in the database. So if you disable a user by using the post-process event handler, it means that the user is already created in the database. For what is orchestration framework is user is created during the period of the orchestration and all event handlers and access policies are evaluated after that.

  Kind regards
  GP