Recording and display of tasks

Similar Questions

• Delete record and display of value in other documents

  Hi all

  I use 11.6 Toad, I don't know if my subject really clarifies what I need assistance.  I'm not able to join (if that's the right solution) display below data.  The record that contains the value 98,38 should appear in other documents and registration with this value should not display.  Can someone help me with this, thanks for reading also.

  SELECT THE SID,

  ORGANIZATION_ID,

  ORGANIZATION,

  PERMIT_NUMBER,

  GAME_DATE,

  BASIS_FOR_FEE,

  ADDAMOUNT,

  CHGSDESC,

  PBPAYAMT

  OF ABCGAMING_PRE_POSTING_VW

  WHERE ORGANIZATION = "Test of bombers".

  
  SID ORGANIZATION GAME_DATE BASIS_FOR_FEE ADDAMOUNT CHGSDESC PBPAYAMT PERMIT_NUMBER ORGANIZATION_ID
  

  247741 243480 bombers test 865 644 3/3/2014 0 0

  247750   243480                       Bombers Test          644                                                     0                       0                                          98.38    

  247740 243480 bombers test 644 3/6/2014 162,5 0 0

  
  

  I would like the results to look like underneath, the PBPAYAMT and the CHGSDESC should appear in the other files.  But also to remove the extra record without Game Date, basis for feesand Addadmount values.

  
  

  SID ORGANIZATION GAME_DATE BASIS_FOR_FEE ADDAMOUNT CHGSDESC PBPAYAMT PERMIT_NUMBER ORGANIZATION_ID
  

  247741 243480 bombers test 865 644 3/3/2014 0 98,38

  247740 243480 bombers test 644 3/6/2014 162,5 0 98,38

  Thanks for the reply from Frank,

  This is my first post since the site has been updated. I'm sorry do not follow the Protocol appropriate seriously. I can extend what you have provided.  Thank you for the statement, this will help me.

• Read xls file and display the data in the table.

  Hello

  Try to read the data from an xls or csv file and fill the same data in the table. If I need to use the table to store the data from the file and display, hoping that someone could help.

  Thank you

  Hari

  Hi hari,.

  One thing that is very important when you use the Excel activeX interface (in case you need it) is good termination of worksheet/workbook/lettering handles.

  You need these handles to specify what cell in which file you are trying to access.

  If you are unable to throw each handle you have, then you will be left with ghost Excel process in your task manager, devours your system's memory.

  Thus, when debugging of your application, open the Task Manager and the watch as Excel treats created/destroyed and make sure that you end up with zero Excel process running when your application is closed.

  Also consider the case of fault for your program. Check that your exit routes did not omit any termination of handle.

• Link to information from tables and display the 'best '.

  Hello! I'm totally new to this great software, and the truth is that I lost D:
   
  I try to explain in more detail what I have to do, I hope you can help me please it is urgent T_T

  I do 3 tables must be related to each other, that is to say a table where a username will be manually enter, another where you manually enter the user name and the third which will automatically enter power of each user (for automatic writing, I'll use random data). Each table will have a box number, for example:
   
  Table 1, box 1: Paul
  Table 2, box 1: door
  Table 3, box 1: 3.74
   
  Table 1, box 2: Miguel
  Table 2, box 2: Ramos
  Table 3, zone 2: 4.99
   
  Table 1, box 3: Maelle
  Table 2, area 3: Branco
  Table 3, case 3: 4.98
   
  I mean, I bind the box to one table with the other three. And because the program must compare the data in table 3 (power) and display the data of the user of best (which has the highest power). In this example, the program should appear:
   
  BEST USER:
  NAME: MIGUEL RAMOS
  POWER: 4.99

  (Is not slender record information when I close the program)

  I don't know if I ask you very much, I have a very clear idea in my head of what I have to do, but being a new software for my not know how to implement it.

  Thank you in advance for your quick response and help and ilustrative! xD

  Have you tried something with the basic understanding of your question check if this is what you need?

  -Still not clear what you mean by table? (In my opinion, the table is 2d array of values here, otherwise please let me know.)

  -C' is the reason why I asked you to show your code you did then it will be clearer.

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• Error on image from the server and display streaming

  Hi all

  Im trying to read an Image that origin of the server and displays on a screen

  Here's the code I'm using to broadcast the image.

  It is streaming on my Simulator as well as on some devices.

  But on some devices, it's not streaming and throw an exception.

  public UrlToEncodedImage(String url)
  {
  HttpConnection connection = null;
  InputStream inputStream = null;
  byte[] dataArray = null;
  
  try
  {
  connection = (HttpConnection) Connector.open(url+getConnectionString(), Connector.READ, true);
  inputStream = connection.openInputStream();
  byte[] responseData = new byte[10000];
  int length = 0;
  StringBuffer rawResponse = new StringBuffer();
  while (-1 != (length = inputStream.read(responseData)))
  {
  rawResponse.append(new String(responseData, 0, length));
  }
  int responseCode = connection.getResponseCode();
  if (responseCode != HttpConnection.HTTP_OK)
  {
  throw new IOException("HTTP response code: "+ responseCode);
  } 
  
  final String result = rawResponse.toString();
  dataArray = result.getBytes();
  }
  catch (final Exception ex)
  { }
  
  finally
  {
  try
  {
  inputStream.close();
  inputStream = null;
  connection.close();
  connection = null;
  }
  catch(Exception e){}
  } 
  
  bitmap = EncodedImage.createEncodedImage(dataArray, 0,dataArray.length);
  // this will scale your image acc. to your height and width of bitmapfield
  
  int multH;
  int multW;
  int currHeight = bitmap.getHeight();
  int currWidth = bitmap.getWidth();
  if(currHeight>350&&currWidth>350){
      bitmap=scaleToFactor(bitmap,currWidth,currHeight,Display.getWidth()-20,250);
  }
  
  }
  public EncodedImage getEncodedImage()
  {
  return bitmap;
  }
  public  EncodedImage scaleToFactor(EncodedImage encoded, int curWidth, int curHeight, int newWidth,
          int newHeight)
  {
       int numerator_width = Fixed32.toFP(curWidth);
       int denominator_width = Fixed32.toFP(newWidth);
       int scale_width = Fixed32.div(numerator_width, denominator_width);
  
       int numerator_height = Fixed32.toFP(curHeight);
       int denominator_height = Fixed32.toFP(newHeight);
       int scale_height = Fixed32.div(numerator_height, denominator_height);
  
       return encoded.scaleImage32(scale_width, scale_height);
  }
  private static String getConnectionString()
  {
      String connectionString = null;
      if(DeviceInfo.isSimulator())
      {
              if(UrlToEncodedImage.USE_MDS_IN_SIMULATOR)
              {
                     connectionString = ";deviceside=false";
              }
              else
              {
                     connectionString = ";deviceside=true";
              }
      }
      else if(WLANInfo.getWLANState() == WLANInfo.WLAN_STATE_CONNECTED)
      {
         connectionString = ";interface=wifi";
      }
  
      else if((CoverageInfo.getCoverageStatus() & CoverageInfo.COVERAGE_DIRECT) == CoverageInfo.COVERAGE_DIRECT)
      {
          String carrierUid = getCarrierBIBSUid();
          if(carrierUid == null)
          {
           connectionString = ";deviceside=true";
          }
          else
          {
             connectionString = ";deviceside=false;connectionUID="+carrierUid + ";ConnectionType=";
          }
      }                
  
     else if((CoverageInfo.getCoverageStatus() & CoverageInfo.COVERAGE_MDS) == CoverageInfo.COVERAGE_MDS)
      {
        connectionString = ";deviceside=false";
      }
  
     else if(CoverageInfo.getCoverageStatus() == CoverageInfo.COVERAGE_NONE)
      {}
      else
      { connectionString = ";deviceside=true";} 
  
      return connectionString;
  }
  private static String getCarrierBIBSUid()
  {
      ServiceRecord[] records = ServiceBook.getSB().getRecords();
      int currentRecord;
  
      for(currentRecord = 0; currentRecord < records.length; currentRecord++)         {             if(records[currentRecord].getCid().toLowerCase().equals("ippp"))             {                 if(records[currentRecord].getName().toLowerCase().indexOf("bibs") >= 0)
              {
                  return records[currentRecord].getUid();
              }
          }
      }
  
      return null;
  }
  

  The underlined part of the code is where the uid is sent as public _.

  Please, look in the code and let me know where the error is, or is there a better way to disseminate the image.

  In the hope that you hear.

  Thank you & best regards

  Krishnan

  Hello

  I found the error.

  It's in the URL sent by the server.

  The URL consisted of http://google.com

  But the format required to retrieve the image on several device would be http://www.google.com.

  Thanks for anyone who tried to help him.

  Krishnan.

• Windows 8 refreshment stops at 77% and then restarts and displays an error

  I can't update my Windows 8 Pro because when I do, it stops at 77% and then restarts and displays an error (there was a problem during the update of your PC)

  Hey Sajjad,

  I understand that you cannot update your computer Windows 8.

  1. did you of recent changes to the computer?
  2. Why are you trying to refresh Windows 8?
  I suggest you follow the steps mentioned below and check if it helps.

  Method 1:
  
  I suggest to disable all external devices except the mouse and keyboard and try to refresh.

  Method 2:

  Use the check disk command for all errors on the hard drive.

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

  Use the drive control as follows:
  a. press the Windows key + X, and then choose command prompt (Admin) on the shortcut menu.
  (b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
  c. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
  d. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.

  NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  You can follow the links below for more information.

  How to restore, refresh or reset your PC:

  
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create the installation media for a PC refresh or reset:

  
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Refresh and reset your PC:

  
  http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspx

  Warning for update: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh your PC.

  Warning for the Reset: all your personal files will be deleted and your settings will be reset. All the apps that the is come with your PC will be reinstalled, but all other applications will be deleted.

  Hope the above information helps.

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• CS5 - sub commands Start Recording and play recorded command grayed out

  How can I activate "Start Recording" and "play recorded command? Please and thank you...

  Sorry to be so stupid, the feature has been removed from the latest versions of Dreamweaver. The recoding and reading refers to a macro that you can create to automate tasks within DW.

  Take a look here help Dreamweaver | Task automation

• Image: poster of local disk, download server and display the server file system

  Hello

  I use jdev 11.1.2.4.0...

  The requirement is that users want to upload images to their local drive for the drive on the server and they would like display of server disk images later.

  We do not want to save the images in the database. I'm not sure what should be the solution; However, I intend to...

  1 create a table to keep information from images - image_id, image_location (server drive), image_filename

  2. create a page where users can enter image information and specific file on a local disk name (I think I'll use inputFile component) and provide the Preview button to display an image on the screen before saving. To record data is to save the information in the database and copy an image file on the disk on server (the location for image files is predefined.)

  3. create another page where users can browse the database information and display an image for a selected record getting from the server.

  I need suggestions on...

  1. how to display an image on the page of the local drive?

  2. how to copy a file on a local disk to a server?

  3. how to display an image on the page of the drive on the server?

  Thank you.

  NAT

  See:

  http://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-1/

  http://tompeez.WordPress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-2/

  http://tompeez.WordPress.com/2011/12/16/jdev11-1-2-1-0-handling-imagesfiles-in-ADF-part-3/

  When Timo records the images in the database, you save it in the file system (examples on how to do this Java are available much if you just Google for it). Similar to Timo you then use the tag image to display pictures. The difference is that you can directly add the URL of the database table.

  The advantage of using a database to host images, it's that you're not although dependent on files server structures

  Frank

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• When I click get mail, why my messages are automatically read, my tools, options, read and display, is defined no to read messages automatically?

  IM using windows 7 on a computer toshiba laptop. Tools, options, read and display, settings do not seem to
  to take effect.

  kasbr

  And your via IMAP and read your mail on another device and the State is synchronizing. Although some phones I understand making mail as read when you download it.

• just installed firefox 8.01 and display is invisible in the my vista screen enlarger. has worked in firefox 3.6. What should I do?

  There is a magnifying glass program in vista, designed for those who have poor eyesight. you move the cursor over the portion of the screen that you want to read and it is displayed in a box at the top of the screen that is larger than the specified size. but in ff8.01 he sees through the window of firefox and displays the vista boot screen so make viable firefox under the microscope. Although the page appears correctly writing is to small to read. It worked well for ff3.6 and fine in google chrome, but the same thing happens in IE9

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.