Recording of data at low speed

Similar Questions

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• Satellite A100 - 192 Windows Vista USB low speed

  Hello

  I installed vista on A100-192, I configured everything correctly, all the drivers installed, but the USB transfer speed is totally low and when hollow transfring usb I have sound and video form. / CPU usage is 100 percent when data transfer from my camera or compact flash. Same thing with the PCMCIA card.
  On windows xp, it worked great!
  I guess it's something about drivers, because when I connect my hard drive usb hollow it works very well/windows sees it as a hard drive, but when I connect something else, and windows sees it as a removable drive - about low speed starts :/

  Any idea on how to solve this problem?

  Best regards
  Krystian

  Hello

  do you have what drivers installed? That you have downloaded the drivers, have you downloaded the correct drivers? Sorry for my question, but I'm sometimes on certain things and then I can't explain the errors that are produced.

  Welcome them

• Satellite P100 GPU fan turns costantly at low speed?

  Finally something strange happened on my laptop and I wonder if even happened to other users of P100 series laptop. All of the sudden GPU fan began to operate at low speed all the time. Before he reached 60 ° C and then had shrapnel short until it cooled down to 50 ° C and the order. But now it runs at very low speeds and temperatures are around 48 C. It is not noticeable and I'm very happy with what (it should be like that from the start).

  Now I wonder what could have triggered that. Do you have bios that has changed (I have the latest 2.40). At the beginning when I changed the computer bios worked as before, but then at some point I changed muffler in performance mode and since that day, the GPU fan runs constantly. I tried to change it to silent mode, but the GPU fan runs all the time. My laptop is P100-115 (Geforce 7600)

  Hello

  Looks like you re a happy with the use of the fan.
  I think that the new BIOS has been changed and that's why he has better influence on the performance of cooling module and so it works at very low speed. I think it is much better than the rotation of the fan restless.

  As you have already mentioned the Toshiba power saver controls the speed of the CPU and cooling method. If these settings could affect the cooling of laptop.
  But believe me; It of much better to have the constant low temperature and fans completely.

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• data logger high speed

  Hello

  am very new to Labview. I used a data logger high-speed (labview 6i). Files are saved in the binary format. How can I convert files to ascii format or text for post-processing?

  Thank you

  Hi Valentine,.

  I hope you had a good weekend.

  I had a go at the conversion of the sample code down to LabVIEW 6, so you won't have problems to open it.

  It will be useful.

  Steve

• Tracing and recording of data from multiple channels (and tasks)

  I have two modules in a CompactDAQ chassis:

  -NI 9213 (TC 16 channels)

  -NI 9203 (8 current)

  I'm using LabVIEW 11, data acquisition both of the modules without problem. I am, however, having trouble with the tracing and recording of data. Is there a method to combine the tables 1 d of waveforms from each of the two tasks, so that a waveform chart can accept? In the same way, I can write them to the same PDM or the file lvm?

  The tasks use the same synchronization settings, which shouldn't be a problem. It is 1 to 10 Hz, so I have no major concerns regarding performance.

  I'm new to the Forum, so I apologize for any misstep in terms of etiquite. Thanks in advance for the help.

  I might be misunderstanding your question, but why can't you just use the 'build' array function to combine your two bays of waveform?  Click on 'build array' and select 'Concatenate' to add one table on the other.

  

• Treatment of LabVIEW data and high speed data acquisition C

  Hi all

  I am designing a data acquition VI high speed of 3 cards acquition of data at the maximum speed. Data cards are PCI 2517 Measurement Computing. The sampling frequency for each card is 1 M samples/second, if the total sample of M 3/second of three cards. Problem is the LabVIEW drivers and the screws provided by the provider works very well just for a single card at maximum speed, but does not support multiple cards at maximum speed. Their technical engineer advised me to write code in c#, C++ or VB.NET for this data acquition high speed. If I use C forever, I would like to use LabVIEW for processing of the acquired data to data acquisition. I came across a few examples that suggest the creation of dll C code and then calling it a LabVIEW. But those who have programs simple and none of them speak in C data acquisition. My questions are,

  1. is it possible to call a C data acquisition program high speed of labview and not work in any kind of present of buffer overflow?

  2 would it not simple best to use labwindows CVI?

  3. is there another alternative solution that I'm missing?

  I'll appreciate all the entries.

  Thank you!

  Nilesh-

  It's pretty easy.  Arguments for CINrun must match wiring.  You can wire your CIN function block and say LabView to generate the C interface code to begin.

  Here's my pairs for the ASIO audio project.

  All the best,

  Terry

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I can't stop the recording of data on a DVD. is it possible to stop this?

  I can't stop the recording of data on DVD

  is it possible to stop this?

  It indicates a security error

  Please help as recycling seems to be the only solution

  Original title: HP Pro Book S-series windows 7 proffessional

  Hello Mike,.

  Thanks for posting your question on the Forum of the Microsoft community.

  I understand that you have problems with a DVD, but I would like to learn more about the issue to provide you with better assistance.

  1. What do you mean when you say, 'I can't stop recording of data on a DVD?
  2. You talk about a blank rewritable DVD? It is specific to a particular disc?
  3. What is the accurate and complete error message when you say, 'this shows that a security error "?
  4. Are you able to eject the DVD? If so, what happens when you save the data without any disc in the drive?

  I suggest you to provide the information identified above to refine the question and provide you with better assistance. Apart from that, you can try the mentioned below of methods based on specified corresponding understanding.

  Method 1:

  If you mean that the data you record are, by default, saved on the DVD player, then you can change the default save location as detailed below.

  1. Open libraries.
  2. Right-click on the Documents folder, and then click Properties.
  3. Click on restore the default settings.
  4. Repeat steps 2 and 3 for the musicfiles, photos and videos in the library.

  Try to save all the data and check if the number is reproduced.

  Method 2:

  If you have problems with the specific DVD when inserted into the CD/DVD drive, you can try to let flow the next fixit and check if it helps.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Hope this information is useful. Please post back with the information required for any further assistance. We will be happy to help you.

• If you use up your data at high speed can still download apps?

  * O.T. > account Microsoft Family

  If you use up your data at high speed can still download apps?

  You can, just slower (whatever the speed your Internet company service provider provides).

• Low speed on Wireless N

  I'm trying to implement a DV6 on Wireless N. I have a Linksys WRT160N router and get speeds up to 120mbps on a desktop wireless located near 100 feet from the router. I can not get over 54 Mbps on the laptop, even within 10 feet. I checked the properties of the device and verified that the width of the channel is set to AUTO and 802.11n Mode is ENABLED. I noticed the rest of my system below specs. Any help would be appreciated.

  LAPTOP MODEL: HP DV6

  Operating systems: Windows 7 (64-bit)

  RAM: 4 GB

  WiFi ADAPTER: Intel WiFi Link 1000 BGN

  PILOT: 13.0.0.107

  ROUTER: Linksys WRT160N

  FIRMWARE: 3.0.02

  After much research, I believe I have solved the problems with the Wireless N of low speeds, especially with Intel WiFi Link 1000 BGN configurations. Here's what I could learn from Intel support forums.

  "The IEEE * 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast encryption algorithm." If you use these methods of encryption (WEP, WPA-TKIP), your rate will be reduced to 54 Mbit / s. Intel® WiMAX/WiFi Link 5350, Intel® WiMAX/WiFi Link 5150, Intel® WiFi Link 5300, Intel® WiFi Link 5100, Intel® WiFi Link 1000, and Intel® Wireless WiFi Link 4965AGN client drivers connect using a legacy IEEE 802.11 g connection rather than failing to connect altogether which complies with the IEEE 802.11n draft standard. "This means that you must use a connection Wi - Fi Protected Access * (WPA2-AES or WPA2-TKIP).

  I have reset the wireless security on my router to use WPA2-AES, reconfigured my laptop for the same security settings and options was immediately connected to more than 200 Mbit/s.

• Is Essbase 11.1.2 record text data?

  Anyone know if Essbase 11.1.2 record text data? or it identical to the older version just save a numeric code which link to RDBMS on Hyperion Planning data
  
  Thank you

  Since the Essbase DB 11.1.2 Administrator's guide - Essbase must store the values of text as numbers. Therefore, a mapping of text values to numeric values. You define the mapping between text and numeric values by creating a list of text object. A list of text object consists of a list of text values and a numeric value that corresponds to the value of each text.

  HTH-
  Jasmine.

• Problems write in I / O with VISA series (low speed of the program being recorded)

  Hello! I've been monitoring voltage speed of the serial port 230000 baud / s. It is fast and accurate, but when I want to save this data to a tmds, xls, txt file, reduce the speed of the program and buffer overflows in series, which reduces the voltage rate control information. I tried on 2 PC with four core processors. I think that it is not because of the PC.

  Because of what it might be?

  File IO is SLOW.  You must compensate for that somewhere.  Look at the producer/consumer.  The idea here is to have a loop that simply reads the serial port (as fast as it should) and use a queue to pass data to another loop to process and save to disk.