If you use up your data at high speed can still download apps?

Similar Questions

• Impact on performance when you use the LONG data type

  Hi all
  
  
  Only I have a doubt about the use of LONG data type
  
  I use the data type LONG for some columns in a table and I created indexes on the columns separately, but these column values can be easily fit into the varchar data type.
  
  (Just to see the performance on this issue)
  
  Suppose that a common select query with WHERE condition on any of the column which has LONG data type will affect the performance of the query?
  
  Please explain.
  
  Thank you

  (1) the LONG (and LONG RAW) data types have been depricated for quite a while. Oracle has been strongly recommends that you move to 8.1.5 CLOB and BLOB data types. Why you use the LONG data type? You're still on Oracle 7?

  (2) have you tried to write a query that has a WHERE condition that refers to a LONG column? In general, you can not because it does not support the type of data LONG. For example

  SQL> ed
  Wrote file afiedt.buf
  
    1  create table a (
    2    col1 varchar2(30),
    3    col2 long
    4* )
  SQL> /
  
  Table created.
  
  SQL> select * from a where col2='abc';
  select * from a where col2='abc'
                        *
  ERROR at line 1:
  ORA-00997: illegal use of LONG datatype
  

  LONG data types are a royal pain to work with. They also have implications on the performance of wicked on the client.

  Justin

• Treatment of LabVIEW data and high speed data acquisition C

  Hi all

  I am designing a data acquition VI high speed of 3 cards acquition of data at the maximum speed. Data cards are PCI 2517 Measurement Computing. The sampling frequency for each card is 1 M samples/second, if the total sample of M 3/second of three cards. Problem is the LabVIEW drivers and the screws provided by the provider works very well just for a single card at maximum speed, but does not support multiple cards at maximum speed. Their technical engineer advised me to write code in c#, C++ or VB.NET for this data acquition high speed. If I use C forever, I would like to use LabVIEW for processing of the acquired data to data acquisition. I came across a few examples that suggest the creation of dll C code and then calling it a LabVIEW. But those who have programs simple and none of them speak in C data acquisition. My questions are,

  1. is it possible to call a C data acquisition program high speed of labview and not work in any kind of present of buffer overflow?

  2 would it not simple best to use labwindows CVI?

  3. is there another alternative solution that I'm missing?

  I'll appreciate all the entries.

  Thank you!

  Nilesh-

  It's pretty easy.  Arguments for CINrun must match wiring.  You can wire your CIN function block and say LabView to generate the C interface code to begin.

  Here's my pairs for the ASIO audio project.

  All the best,

  Terry

• data logger high speed

  Hello

  am very new to Labview. I used a data logger high-speed (labview 6i). Files are saved in the binary format. How can I convert files to ascii format or text for post-processing?

  Thank you

  Hi Valentine,.

  I hope you had a good weekend.

  I had a go at the conversion of the sample code down to LabVIEW 6, so you won't have problems to open it.

  It will be useful.

  Steve

• What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  Francine simply connect to the internet periodically to receive updates and validate your membership.  If you have an annual membership, you can be disconnected until 99 days.  You can find more details in the help of Activation & deactivation.

  I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• I use a nokia lumia 520, I can't download apps more, I always get a message saying "microsoft account is unavailable, try again later", what should I do?

  How can I download apps on my Nokia Lumia 520 if I still get the ' Microsoft account is unavailable try again later ".

  .i can't solve this help please

  Hello

  I suggest you post the same question in the Windows Phone forum for more help on this issue. Ask your questions with the following information as well.

  1. you are trying to download apps on Windows Store?

  2 have you tried the troubleshooting steps to resolve this problem?

  3. have you made changes on the computer before this problem?

  Here is the link to post your query in the Windows Phone forum.

  http://answers.Microsoft.com/en-us/WinPhone

  Please do not hesitate to visit our Web site for any help with the operating system Windows or OneDrive.

• What value for p_print_server when you use the Rest Data Services as a print server?

  Hello

  I have my report server on the internal workspace defined as BI Publisher URL as default... It works for my BI Publisher reports.

  I have 2 reports who need to use the rest Data Services FOP engine and use GET_PRINT_DOCUMENT function Signature 4

  https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/apex_util.htm#AEAPI146

  For these 2 reports, I need to pass a parameter to p_print_server. The documentation describes this as the URL for the print server

  My question is, how to find the URL for p_print_server when I want to use the rest Data Services FOP on ADR?

  I can not put as NULL as at the time, it will use the default BI Publisher URL and then these 2 reports will not work

  Moreover, when I put the server reports on internal workspace as 'Rest Data Services', my two reports work fine, but not when I put is as URL BI Publisher - which is necessary

  Help, please

  Concerning

  Matt

  Hi Matt Mulvaney,

  Matt Mulvaney says:

  I already have the correct configuration to be able to produce reports FOP including two steps you mentioned. This set works very well when I put the "Print server" preference in the settings of APEX Data Services Instance remains - and reports can be produced. But as I said, this must be set to a URL of BI Publisher.

  If you use "Print server" as "Oracle BI Publisher" then the p_print_server parameter would have been:

  http://myserver.mydomain.com:8888/xmlpserver/convert

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (you can also use the IP address)
  • Print Server Port: 8888 (depending on what your BI Publisher Server uses port)
  • Print server script: / xmlpserver/convert

  Similarly, if you choose "Print server" as 'Oracle REST Data Services', the instance settings don't ask questions on the print settings, but internally it uses the following parameters and the p_print_server parameter is:

  http://myserver.mydomain.com:8080 / ADR / _ / fop2pdf

  Where:

  • Printing of the address of the host server: myserver.mydomain.com (host computer on which ADR is hosted)
  • Print Server Port: 8080 (the port used by what ADR/APEX Forum)
  • Script of the print server: / ords / _ / fop2pdf (this is not disclosed by APEX/ADR documentation, but as mentioned by Marc Sewtz in the following thread)

  Reference: Re: Apache FOP disappeared by Oracle APEX installable APEX 5.0 and 5.0.1 APEX

  Kind regards

  Kiran

• What is the best way to read data series high speed?

  My goal is to read 14 bytes of binary data of an instrument on the serial RS232 (460800 baud) to 2000 Hz. I didn't get a card series high speed again so I am currently using the standard serial port (115200 baud) and reading at 400 Hz I have configure the port series, empty the buffer, and then enter a while loop to read incoming data. I have a visa 14 bytes read by interation seconds 0.0025 (400 Hz). However it seems that the sensor is spewing data faster that labview can read because the bytes are accumilating in the port. After some time the buffer fills and the program fails.

  Is there a better way to do it?

  Would it not be better to read the larger quantities of data less often, for example as 1400 bytes every 0.25 seconds?

  Thank you

  Hello

  I think it would be good to read several points in a loop, and keep the loop less than 1000 Hz.  I found in the past, have something to run faster than about 10ms tends to fall down when windows loses interest in the process.  So yes, choose the slower you can get away with reading samples - for example to read every 10ms and read 20 samples every time. You should be able to configure your serial port in order to buffer the samples that I guess.

  Also and the issue of windows - if you use a loop "timed" instead of a while loop, so you can force it to an integer value including the ms.  You can also assign a dedicated processor and set the priority to 100, which means that it is less likely to elapse and decide to scan your hard drive for viruses or consult your account e-mail or what he does when he's bored with your program.  Also it "' tells you if the loop has taken longer that planned to run - you can use this to help iron out bugs etc. - report and/or to the user if you missed a few samples.

  http://zone.NI.com/reference/en-XX/help/371361H-01/Glang/timed_loop/

  JP

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• XP, try to use Guided Help get message 'guided help can be downloaded right now.

  Hi I am running windows xp 32 bit editionon houses a HP pavilion a620n with a 3200 + processor AMD Athlon xp with a speeed of 2.20 ghz processor and a max of 512kb L2, 2 GB pc3200 DDR SDRAM. Drive hard seagate sata 2 TB, NVIDIA GeForce 6200, a video card card creative sound Blaster Audigy 7.1, a 850w power supply sound and my computer runs like honey on a middle of winter in alaska, and honey was left outside throughout the night. I hear this piece of poop makes me sick. The extra ram was supposed to solve the problem, then the new hd was again to solve the problem, the new hd has been installed with the installation disc I made when I bought this computer. I tried to reinstall the original 512 mb memory stick with out any luck to solve the problem. Something that I double click on causes the CPU to go to 100% and stay there for a long time. I'm short security suite norton for free protection for subscribers of comcast. someone said that my comp. can run a maximum of 512 MB per slot. There are (2) locations so I took my wife 521 MB of sound ho pavilion a610n and added to my 512 MB for a total of 1 GB and it works still slow.

  any comments would be much appreciated and forgive my spelling, I now have a new keyboard that the last of them got slammed on real hard and if things continue as they are, you might want to decorate logitec wireless keyboards are my 5th and they are going faster and faster as my computer is slower and slower

  Please help me save a few keyboards and my computer

  Bob_Cat

  1 ram: motherboard manufacturing shows 2 GB ram max and I think that one of the Department stores that w = has a ram find tool on their site Web indicates 4 GB max ram

  on the T.M.  tab performance in respect of the physical memory (k), these are the numbers now total 2096624 cashe1186136 system 1128812 available

  2 cpu: use Re: when I check the Task Manager it's never the same thing using the cpu, some times it's the exploreexe, iexplore.exe, svhost.exe, exc. exc. itunes.exe, but always 100%.

  3. new hd: no he never got faster he remained slow.

  4 remove the software: since I got this computer I would only remove programs that I need the memory buy now, there are 2 TB and I will never again need hope.

  tried 5 remained the same

  6 other security software: Yes microsoft security databases. and Yes, I removed the software on more than one opportunity with no relief for the cpu

  You did buy more, and a faster memory that your computer HP support (see specifications), but this probably isn't what is causing your computer to run slowly.

  When the CPU usage goes to 100%, what is the task that does this (look in the Task Manager > processes)?

  When you used the "Setup disk" that you had created, restore your computer to the State wherever it was when you first bought it?

  • If so, the computer run faster for any period of time before slowing down again?
  • If so, did you uninstall all the trial software that had been installed at the plant, including in particular any Norton, McAfee or other tests of security software?

  Other Norton product, have you any other security software (antivirus, antimalware, firewall, etc.) that works all the time (that is, do not count a scanner that only runs when you start specifically)?

  You can consider (temporarily) disconnected the computer from the Internet and completely uninstall Norton (operating instructions and there removal tool--> https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home), then see if your performance is improved.

• You want to clean install Windows Vista. Can I download media Dell supplied with my machine?

  Help - want to start again.

  I have a Dell XPS630i with Windows Vista. I can't go online. I got a blue screen saying crash dump. Turned it off. Same thing is back. Finally, I came home and I can't get online.

  I want to just start over completely. How to clean and reload the discs and the Vista from Dell. I've got it all. I have back ups of all that interest me.

  Please help me!

  Thank you

  Ann Bush

  Email * address email is removed from the privacy *

  Hello

  Here's how to reinstall Vista with the Glens recovery Partition (if available to you):

  "Restore your software Computer´s factory settings."

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And this is how to use recovery provided Dell discs:

  "Manually reinstall your Windows Vista operating system"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  If necessary (if you have problems with discs), call Dell and ask them to provide you with a set of recovery disks Vista.

  They do it for a small fee.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• In XP, try to use Guided Help get message 'guided help can be downloaded right now.

  I use Windows XP sp3 32-bit. I want to use Guided Help. But it shows a message that, ' guided help can be downloaded right now. Now, how can I download and use guided help?

  Hi RiponMajumder,

  Which edition of XP are you using?

  You must be logged on to Windows by using an administrator account to install and use Guided Help, and you need to run Windows XP Home Edition, Windows XP Professional, Windows XP Media Center Edition or Windows XP Edition Tablet PC.

• You use the cellular data (3G) a lot about your xoom? Could miss you if you don't have 3G?

  guys do you miss not having does not have access to cell phones? you are perfectly ok with WiFi only? have you been in situations in which you want to that you had access to cell phone?

  I would be acknowledging all responses from users only wifi... I'm looking just at the answers I see here to help me decide something...

  -marc

  Sprint user (index)

  
  

• what OS you use for VMware Data Recovery 1.2.0.1131

  I tried all versions of Linux OS 32-bit for the configuration of the VM for the OVF, but I got the same error every time

  Your CPU is not support long mode. Use a 32-bit distribution. --

  I'm under ESX 4 and vCenter.

  Any idea?

  Thank you

  After assigning VT turned on in the BIOS, you may need to power cycle your system (power power off). A reboot is not enough.

  If this does not resolve the issue, take a look at KB1003945 - requirements Hardware and firmware for 64-bit operating systems to see if your system meets all the requirements to run 64-bit operating systems.

  André