Records are missing after the fact, but not photos

Similar Questions

• Programs are missing after the running virus scan

  Original title: all my programs were leaving swipped when I put my anti-virus on

  When I downloaded my spyware. He swipped all my programs such as my word of procecers.  am trying to type a paper and it is raining on my computer and my computer came with them which means that they did not come with a cd to redownload

  Hi bjrthuggin286,

  1. what programs are missing from the system?

  2. what spyware Antivirus software do you use?

  You can try a system restore to a previous point where you have not experienced the problem.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Fonts I have installed in the font book are missing after the upgrade 10.11.6

  I ran the upgrade recommended this morning at El Capitan 10.11.6 on my end 2011 MacBook Pro. A certain font was not available when I opened an Illustrator document, so I opened the font book to see why and found that hundreds of fonts, I entered the book of policies over the past year or more are missing. I know that real fonts are still in my police records, but a number of hours of work participated in their addition to the font book and organize them into folders. Is all the work is lost, where can I access the preferences that contain this information somehow? What a brake if not. Font book does not yet have all folders that I put in place, they are just empty and only the core system fonts are loaded.

  Unless I can access the old prefs I guess I also install all my software again, to make sure that necessary fonts are loaded?

  Help!

  John

  cjohna wrote:

  I ran the upgrade recommended this morning at El Capitan 10.11.6 on my end 2011 MacBook Pro. A certain font was not available when I opened an Illustrator document, so I opened the font book to see why and found that hundreds of fonts, I entered the book of policies over the past year or more are missing. I know that real fonts are still in my police records, but a number of hours of work participated in their addition to the font book and organize them into folders. Is all the work is lost, where can I access the preferences that contain this information somehow? What a brake if not. Font book does not yet have all folders that I put in place, they are just empty and only the core system fonts are loaded.

  Unless I can access the old prefs I guess I also install all my software again, to make sure that necessary fonts are loaded?

  Help!

  John

  Use your backup Time machine restore.

  Your book plist police is located on via Finder > go > go to folder, copy and paste:

  ~/Library/preferences/com. Apple.FontBook.plist

• My executable Application are missing after the upgrade to Windows 8?

  I've upgraded to Windows Vista Premium 8 and now my executable files of the application are missing? Can anyone tell where they went?

  To install Windows 8 Windows Vista or Windows XP, you must perform a new installation. This means that you will not be able to keep the settings, all files or programs when you upgrade.

  You need to reinstall your executables.

• Songs are missing after the firmware update

  Hello

  I've updated my Sansa Clip 8 GB mothers today via Autoupdater. Everything works fine, except that the root folder is different now and music disappeared somehow. Well, the music is still there (it's GiB 4.2 of 8 complete), you can even hear it. He just disappeared under windows (XP, Vista, and 7). How can I 'save' music?

  Greetings

  If you reset your USB mode under settings back to what it was set to before, the music must be visible again. When you update the firmware, USB mode gets reset auto.

  When the drive is connected to your computer using the USB MSC (the value of the player in settings/USB mode), your computer only sees the files that had been moved to the drive when the drive is connected in MSC mode.  Similarly with regard to the MTP mode.  However, all the files appear and can be played on your player, under some USB mode setting.

  A reason why some people prefer to set the USB Mode on their player to MSC or MTP: setting Auto, the Player tries to connect in MTP mode but then you will return in MSC mode if the connection of the MTP does not; as a result, you can have a mixture of MSC and MTP mode transferred the files to your drive, making some of them isn't visible on your computer without going to the other USB mode.

  Because MSC mode is more universal (playing with a wide range of operating systems, including Linux and on Mac, and without the need for Windows Media Player on the computer), some people prefer MSC mode.  However, note that the DRM (digital rights management) files need MTP mode - they will not transfer enough (the DRM license will not transfer) in MSC mode.

• The videos are missing after the importation of the iphone

  Help!

  The videos that are on my iphone are missing from my iphone AND in window photo gallery. I want to cry, there was more than two years of special moments!

  Hi AnnMor,

  You did changes to the computer before this problem?

  You can search for video files by typing the name of the file, or from its tags, file type.

  For more information, refer to this link: find a file or folder

  For the issue of the iPhone, I suggest you to contact Apple support to see if they can recover the data from the iPhone.

  Hope the helps of information.
  Please post back and we do know.

• Cf11 on Windows 2012 several issue areas - will load the directory, but not direct FSTC

  I have a strange problem where I have two websites:

  D:\Inetpub\wwwroot\

  and

  D:\inetpub\webapps\

  that are related to the different areas.

  All about the value default (wwwroot) works very well with ColdFusion.

  However, on the 'webapps' site it loads ONLY CFM files if I call them implicitly as a directory.

  For example:

  http://my.site.com/

  load the index.cfm very well, however:

  http://my.site.com/index.cfm

  always returns a 404 error.  Is there some kind of mapping or permission that I need to make this work?

  I checked wsconfig and it is set to the IIS Web sites all.  I also ensured that the IIS_IUSRS permission is set on it.

  Has anyone seen this?  I appreciate all the advice.

  Thank you!

  Dan

  Have you actually tried wsconfig running again? Even if it is on all sites, if you add a new one, that it is not get included in this. You must re-run the new connector.

• Why don't I veiw my pictures can't. shows the files but not photo

  My computer shows the files on the screen, but you must click on each photo to see. Never had to do before.

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• When I export a PDF to JPEG, the margins are screwed to the top, but not in the PDF file. Why?

  I did a series of layouts landscape 8.5 x 11 in Illustrator, they all had the same instructions in the PDF file, aligning the different elements of text and vector itself. When I saved and print PDF files, they look good and printed as expected.

  However, when I go to file-> export... and save another version in JPEG format, they are all out either a little cut on the left margin or right margin. It is not consistent that confuses me, also because they look all uniforms in PDF format. Anyone know what I can do in the document or export the setting to prevent this from happening in Illustrator?

  When we realized that what was going on, we just open the PDF files in Acrobat Reader and saved in JPEG format, which takes more time, but is not screw up left or right margins. Any ideas what's happening? Thank you!

  You have to draw everything in alignment with pixels in Illustrator. Otherwise, a line may fall between 2 rows of pixels and you get this effect.

  But let's be honest, I think that JPG is not the best type of file to export from Illustrator. Why you do this?

  If you need to print, use HAVE or PDF/X-4, if you need it for the web or MS Office use PNG, if you need it on MS Office on Windows, use EMF.

  JPG has some kind of lossy compression that makes very visible spotty areas with drawings line Illustrator produces, so I would not recommend to export HAVE them in JPG format at all, unless you have a priority of photography and the work of art is not the object of your file.

• roboform menu, bar and all the toolbars are missing after the Fierefox 5

  I've upgraded to Firefox 5 and couldn't get the Roboform toolbar. Then the menu bar went away. I tried to restore it with the Alt key, as has been suggested, that did not work. How can I go back to the previous version of Firefox? I desperately need the Roboform and navigate. Thank you

  I had trouble with this too, but I found the answer.
  Download the addon from Lite RoboForm Password Manager. I thought that it worked only for the RoboForm everywhere, but it works for the ordinary too.
  [https://addons.mozilla.org/en-us/fire.../roboform-online-password-manag/]

• J4680 are visible on the network but not printing/scanning

  Everything I describe works very well for 2 years...

  The J4680 is/has been connected wireless to my home network.

  My daughter printed something and it came out blurry.  I tried to copy something to see if it was the printer and it came out very well so I did a calibration using the Tools menu of the printer.  The printer print the calibration page, but he complained that he couldn't find a calibration page when the time came to do the scan of the calibration page.  Yet once, I tried to use it as a copier and it works perfectly.  Since then, I can't print or scan to this printer on any computer in the House.  Client computers run a mix of XP, Vista and Win7.  HP Diagnostics (in the plural) I have downloaded all show the connected printer and works correctly, but still no printing.

  I connect to my router and you can see the printer connected as a DHCP client using 192.168.15.1.  I can open a browser, connect to this IP address and have access to the printer.  He sees the ink level and shows the status of the printer such as "processing job".  Open HP Solution Center shows the printer as "offline".

  I rebooted the printer and all the computers in the House... not to go. I restarted the router... no go.

  I reinstalled the software solution Center and it is printed once, but when I tried to scan, it does not and it was not printed or scanned again since.  I tried doing the calibration thing and still get the same message.

  I'm at my wit's end.  Help?

  OK, let's remove the cartridges, clean the electrical contacts (small 1/16 "points on the cartridge and corresponding to those inside the printer.  Use a damp lint.  The fabric will be destroyed with ink.

  Now, try it.  If who disobeys, the driver on your computer using "clean cartridges".  If this does not work, you may have a faulty cartridge (probably color).

• Is committed after the removal or not.

  Hi all
  
  I'm reviewing a bug in the application activity. Ongoing frequent deletions and I don't know if the validations are doing or not doing.
  I created a trigger to check what DML are executed on the table. I would like to know how can I change the trigger to see if the validations are performed after the deletions or not?
  
  Can anyone suggest how to catch if validation is executed after deletion or not?
  Reason why I do this: MY undo tablespace fills, and I do not know how to solve.
  
  see you soon,
  Malika

  Hello

  Please make the traceing session when the application run the query programmer.

  SQL > select s.sid, p.pid, p.spid
  v $ session s, v$ process p
  where s.paddr = p.addr and s.sid = 146

  SID PID SPID
  ---------- ---------- ------------
  2792 16 146

  SQL > setospid oradebug 2792

  SQL > oradebug Event 10046 trace context name forever, level 12.

  Let it run for 30 minutes around

  SQL > name context trace oradebug 10046 event;

  now format the tkprof with command below

  tkporf raw.trc new.txt sys = No.

  Check that the new.txt and you will come to know

  Here you'll be serious command that this user of the particlaur or execution of process

  Hope that I have answered your question

  Kind regards
  Rakesh jayappa

  Published by: Rakesh jayappa on September 21, 2010 02:26

• I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the entire thing on

  I am new to use the forums.  How to start a discussion?  The ICO next which is grayed out.

  I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the whole thing and put it in a new, m not corrupted project?

  Hello and welcome.

  I feel for you after reading your story, however, it that are supposed to do? It is a forum for Dreamweaver and to my knowledge, Dreamweaver has no functionality called the chronology.

  Could you please explain the problem so that we can understand?

• I just clicked on the shortcut to undo key and then all photos are missing after I get my CF card

  How to get my photo because I just clicked on the shortcut to undo key and then all photos are missing after I get out my card CF.
  I formatted my CF card already.

  < re-titled by host >

  If you clicked the Cancel button right after the import, then you u did import. If the REFO option is available, click on it.

  In otherwise, re - import photos from the card again and do not click Cancel. If the card has been erased, see if you can use the Time Machine backup to restore.

• Uninstalled emet but after the applications would not start.

  Uninstalled emet but after the applications would not start. Internet Explore tries to start but flashes and disappears, even with Excel. Word starts but gets an error when you try to save. Lucky got Google chrome from another pc and installed so I can at least access the internet. Reinstalled Explorer, office repaired, cleaned the registry, but still no start. What should I do?

  A moderator has moved this thread to the programs Windows of Feedback Forum Forum.

  tried, nothing worked so I uninstalled office and re-installed from disc. Explorer 8 still does not work, but I uninstalled a with explore 7 updates and automatic update started and explore 7 worked. Thought I'd try installing explore 8 new. It worked, even if it failed with the Download Manager. Now all back to normal. I would be careful about the use of EMET, unless you know exactly what you are doing. Not a lot of faith in either the Download Manager.