Recovering data using SQL SERVER

Similar Questions

• Using SQL Server as a source of data for Essbase and planning

  I was reading a white paper Jake Turrell on Hyperion Planning 'sandbox' environment on a laptop and it said that you can use SQL Server, u guess my question is I have been using oracle 11 g 2 is really different
  
  also
  
  is better to build a different schema
  
  Shared services
  workspace
  Essbase Admin Srvices
  Planning Respostory system
  Planning of the App
  Manager of Calc
  and
  Web and financial reports analysis
  
  I was just buildint n of the Oracle Instance and make a planning diagram
  
  
  Please notify
  
  Published by: next on 18 October 2012 level 21:27
  
  Published by: next on 18 October 2012 level 21:30
  
  Published by: next on 18 October 2012 level 21:31
  
  Published by: next on 18 October 2012 level 22:11

  for Oracle each planning application requires its own schema for SQL Server, each planning application will require its own database.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Need to transfer data from sql server at EBS

  I need to transfer data from Mirco Soft SQL server database Oracle (EBS).
  
  Please guide me how can I achieve this milestone in best way.
  
  Please provide the price of licenses of the Golden Gate and other product adapted SQL SERVER GATEWAY ect
  
  
  Thanks in advance

  There are a lot of options

  1 using SQL Server linked server is so easy
  http://www.mssqltips.com/sqlservertip/1433/how-to-setup-linked-servers-for-SQL-Server-and-Oracle-64-bit-client/
  2. use SSIS
  http://www.mssqltips.com/sqlservertip/2011/export-SQL-Server-data-to-Oracle-using-SSIS/
  3. using sqldeveloper
  http://St-curriculum.Oracle.com/OBE/DB/hol08/sqldev_migration/MSSQLServer/migrate_microsoft_sqlserver_otn.htm#T9

  hope this helps,

  concerning
  http://www.oracleracexpert.com
  ORA-19755 at the start of the recovery/DB
  | http://www.oracleracexpert.com/2009/09/ora-19755-could-not-open-change.html
  Error ORA-07445 and the reasons for which it
  http://www.oracleracexpert.com/2009/08/ora-07445-error.html

• How only migrate data between SQL Server 2008 Oracle 11?

  According to our requirement, we only have to migrate data from a SQL Server database to an existence
  Oracle database user.
  (1) I tried to do with the wizard of Migration SQL Developer 3.0.04, but find a problem.
  My SQL Server database name is SCDS41P2 and my Oracle database user name is CDS41P2;
  When I used SQL Developer move offline data by the Migration Wizard, I found all the oracle user
  name in movedata files who obtained by running the Migration Wizard
  is dbo_SCDS41P2. If the Oracle user name is not the same as my Oracle username existed.
  the data cannot be moved to my user Oracle existed when I run oracle_ctl.bat in the command line window.
  So I had to change the Oracle username in all the movedata files, but it is difficult to change because there are a lot of tables in
  databases. So could you please tell me how to get the movedata files which is the name of user oracle in them my
  WHEREAS Oracle user name?
  
  (2) I also tried to use the "copy to Oracle" to copy the data to SQL Server database tables
  the user database was Oracle. When you click on 'copy to Oracle', I selected the option 'Include data' and 'replace '.
  But I found some tables cannot be copied, the error info is as below:
  SPSSCMOR_CONTROLTABLE table failed. Message: ORA-00955: name is already used by an existing object
  
  Could you please tell me how to deal with this kind of mistake?
  
  Thank you!
  
  Published by: 870587 on July 6, 2011 02:57

  Hello
  After following with development the following should work too-

  1 use the migration option to capture and convert the SQL * database server
  2. go in SQL * Developer and remove the converted model.
  3. click on the captured model and choose 'convert '.
  4. click Next and you should get a screen with 2 options - "Data Type Mapping" and "Object Naming.
  5. choose "Object Naming" and scroll down the list until you see the name of the user who will be transformed. For example, in my test, I got the names scott_test and dbo_test - where the owners are 'scott' and 'dba' and 'test' was the name of the database.
  6. change the name of oner_database to just owner - scott_test to scott
  7 complete the conversion process and the owners must be created without the name of the database.
  8. you should now be able to generate the SQL * scripts of charger with only the name of the owner in the CTL files.

  Please try this and let us know if it works for you.

  Kind regards
  Mike

• Loading data to SQL server for the Oracle database

  I want to create a table in oracle db table in sql server. Table is huge that he has obtained the documents 97,456,789.
  I created the link (HS) db in the oracle database that points to the sql server. I choose this oracle db on the link table.
  
  Select * from 'dbo '. "T1@dblink;
  
  I shot below to create the table.
  create table t2 nologging parallel (degree = 3) as select * from 'dbo '. "T1@dblink;
  and its taking a long time... but its operation...
  
  is there any other method to do this and and fill the table in oracle db faster.
  
  Please notify. Thank you.

  vhiware wrote:
  create table t2 nologging parallel (degree = 3) as select * from 'dbo '. "T1@dblink;
  and its taking a long time... but its operation...

  I doubt that parallel processing will be used because it is unique to Oracle (using rowid varies in general) and not SQL-Server.

  is there any other method to do this and and fill the table in oracle db faster.

  Part of the performance overhead is to pull that data from SQL Server to Oracle in the whole of the liaison network between them. This can be accelerated by compressing the data first - and who then transfer them over the network.

  For example: using + bcp + to export the data in the SQL Server box to a CSV file, compress/zip file, scp/sftp file Oracle and then to unzip there. In parallel and direct treatment of load can now be done using SQL * Loader to load the CSV file into Oracle.

  If it is a basic Linux/Unix system, the process of decompression/unzip can be run in parallel with the SQL * process Loader by creating a pipe between the two – where the decompression process writes data uncompressed in the pipe and SQL * Loader reads and loads the data that is available through the pipe.

  Otherwise you are PQ own transformation. Assume that the data is date varies. You can create a procedure on Oracle that looks like this:
  {code}
  create or replace procedure as copyday (day) is
  Start
  Insert / * + append * / into local_tab select * from remote_tab@remotedb where col_day = day;
  -Add logging info, validation, etc.
  end;
  {code}

  You can now start 10 or more of these different days and run it in the background using DBMS_JOB.

• Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7 - KERNELBASE.dll exception 0xe0434352

  Hello

  Error occurs when you use SQL Server 2012 assessment vs window detail of the object in window 7.  I use the window of the object but the detail of the objects window arrives and immediately SQL Server stops with the error below and then opens again.  I didn't find any help with this specific error is but suspect there is a problem between SLQ Server 2012 et.NET Framework 4.  Unfortunately, I do not know what it takes in this regard.

  Thanks, Deb

  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Deb - HP
  Description:
  Name of the failing application: Ssms.exe, version: 2011.110.3000.0, time stamp: 0x5081c1cd
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83c8a
  Exception code: 0xe0434352
  Offset: 0x0000c41f
  ID of the process failed: 0x13a8
  Start time of application vulnerabilities: 0x01ce609a6d3db991
  The failing application path: C:\tempSQLWOW\110\Tools\Binn\ManagementStudio\Ssms.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 1fb1cbfb-cc8e-11e2-b436-abd2bebb3f17

  Hi Claude,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Good day!

  Answer please if you face concerns.

• How to view clob data using sql

  Hello
  
  In our database we have a table that is to have a column of type CLOB but now I want to display the data using sql select query but it throws error: "unsupported data Type.
  
  Could someone let me know how to view the clob data using the select query.
  
  Oracle DB version: 10.2.0.3
  
  Thank you

  user562223 wrote:
  Hello

  In our database we have a table that is to have a column of type CLOB but now I want to display the data using sql select query but it throws error: "unsupported data Type.

  Could someone let me know how to view the clob data using the select query.

  Oracle DB version: 10.2.0.3

  Thank you

  Usually a to_char (CLOBDFIELD) circled

  HTH,

  FJFranken

• Can I configure UCM Content Server, Site Studio to use SQL Server?

  People,
  
  As a beginner of Stellent in my first day of training, I have to hand it to you guys. Excellent product! I will need to play with him a bit before I can really understand how it works... so I want to install it on my laptop where I already have SQL Server 2000, run the WebCenter Interaction (Plumtree) DB. Do I really need Oracle DB?
  
  Have an old laptop with not much memory and hard drive space. If Oracle DB is really needed, what is the DB instance footprint lighter ground that I can use with Stellent?
  
  I would like to hear from anyone who has been through this, especially tips, warnings, lessons...
  
  Thank you!
  Rob in Vermont

  Of course, you can use SQL Server with the AAU and WCM. No problem. The exact way - of are all covered in the guides to installation, but you should have no problem!

• Select data source in physical in OBIEE 11 G mode when you use sql server

  Hello
  
  I did my physical review against a SQL Server 2008 R2 server. The list looks up to 2005. I select 2005 in this case? According to the guidelines of the image: http://i.imgur.com/3H7MO.png
  
  See you soon.
  
  I use OBIEE 11 G Windows 32-bit.

  Hello

  Yes it is possible. You can select such as ODBC or SQL 2005 basic can also
  I hope that your version less than obiee11.1.1.5.0, version 11.1.1.1.6.0 and above has updated SQL 2008 in the data source selection list.

  refer,
  http://imgur.com/JSYoL

  Thank you
  Deva

• Replication of data between SQL Server and using Oracle11g materialized view.

  I have Sqlserver 2005 as my source and oracle11g as my target. I need fill out the target daily with change of the source data.
  to do this, we created a dblink between SQL Server and oracle and reproduced this table as a point of view, materialized in Oracle.
  problem that we get here is fast refresh option is not available.each day it will pick up all of the data source.
  is it possible to use Fast refresh in this scenario?
  
  Thanks in advance.
  
  Kind regards
  Balaram.

  You can try MS SQL replication.
  Configure transactional Standard of MS SQL and Oracle Publication subscriber http://msdn.microsoft.com/en-us/library/ms151738%28v=sql.90%29.aspx

• Data type of text is not displayed using SQL Server and ASP/VBScript

  Maybe someone help me with this because I used to use PHP/MySQL, but I use for this a Classic ASP/VBScript and MS SQL Server instance and I don't know that much. The scenario is I have an old site that was designed using html tables and I do a CSS/XHTML update on Visual design. As long as we are here, there are some pages that are dynamic and use a MS Access database and we thought it's a good time to upgrade from MS SQL Server (2005, to be exact). No time/money for bringing classic ASP VBScript in ASP .NET.
  
  Overall, the upgrade went fairly well, especially just to create a new connection to the DB in SQL Server in Dreamweaver after all the tables and data were migrated to SQL Server. Almost everything works as it should. A problem though.
  
  For some reason, the data of the data type 'text' in SQL Server is not appear (or sometimes appear). I even tried to recreate the recordsets and binds fresh data and the code is more or less identical to what we had before. Anyone know what's happening, or how I can get this data to show?
  
  I think that there is perhaps some simple and double quotes in the text data and which could be screwing things up. I was hoping there is only a simple function that I could apply the code, but as I said, I don't know.
  
  Thanks in advance for any help you can provide.
  
  -Bill

  captcashew wrote:
  > Maybe someone help me with this because I used to use PHP/MySQL, but for this one
  > instance I use Classic ASP/VBScript and MS SQL Server and I do not know
  > that much. The scenario is that I have an old site that was designed using html
  > tables and I do a CSS/XHTML update on Visual design. As long as we
  > are there, there are some pages that are dynamic and that use a MS Access
  > database and we thought it's a good time to upgrade from MS SQL Server
  > (2005, to be exact). No time/money to classic ASP VBScript in ASP.
  > .NET so.
  >
  > Overall, the upgrade went quite well, especially just needed a new
  > connecting to the DB in SQL Server in Dreamweaver after all tables and data
  > have been migrated to SQL Server. Almost everything works as it should. One of the problems
  > If.
  >
  > For some reason, the data of the data type 'text' in SQL Server is not
  > appear (or sometimes appear). I even tried to recreate the recordsets and
  > binds fresh data and the code is more or less identical to what we had
  > front. Anyone know what's happening, or how I can get this data to show?
  >
  > I think that maybe there are single and double quotes in the text
  > data and which could be screwing things up. I was hoping that there is only a simple
  > function I could apply the code, but as I said, I don't know.
  >
  > Thanks in advance for any help you can provide.

  Your text field should be the last of your select statement, as
  its not stored in the table with the other data, its stored elsewhere,
  as a binary object, should be treated differently. Its common
  the migration of the access problem.

  If you need more of 8000 characters stick with him, otherwise use
  varchar (8000) or nvarchar (4000) If you need (limited unicode characters
  4,000 cos of the double byte characters)

  Dooza
  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html

• Using SQL Server with ADF BC and getting Houston - 29114 ADFContext aren't Setup error

  Hello... I work with ADF BC and my connection is with a MS SQL Server database.  I added the sqljdbc4.jar in my template project, and can't seem to connect with the DB and build an Entity/View/AppMod infrastructure.  However, once I deploy the application on the integrated WebLogic Server I get errors when ADF BC tries to connect.  I added a POJO supported data control and tried to debug but PPR reports an error when my key to call the code stripped of JDBC:

  Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-29000. Error messages settings are {0 = java.lang.NoClassDefFoundError, 1 = com/microsoft/sqlserver/jdbc/SQLServerException}

  ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #1 60096:Server

  Seems to me that the POT is not in the classpath on the WLS.  What is the problem? If Yes... How would have added that JAR, sqljdbc4.jar, the path of the WLS class.  I've done through the deployment of models, and he saw in the META-INF/lib directory that has been deployed.

  Thanks for any help!

  Do not apply the JDBC JAR (s) in the archives of application deployment. You must add the JAR to the classpath WLS JDBC (s). Change the commEnv.cmd/sh for this script:

  Using JDBC with WebLogic Server - 11g Release 1 (10.3.6) drivers

  Note that WLS is pre-configured with a number of brand WebLogic DataDirect JDBC drivers (including a SQLServer driver), so you can use it instead of adding a new driver if the DataDirect driver meets your needs:

  Using WebLogic brand DataDirect drivers - 11g Release 1 (10.3.6)

  WLS 10.3.5 documentation provides more detailed information:

  The MS SQL Server driver

  Dimitar

• How to extract data from SQL server in the FDM

  Hi Experts
  
  How to extract data from a SQL server HFM to another SQL Server using scripts for integration in FDQM?
  
  concerning
  
  Dev

  Could you clarify why you want to do this?

  If you try to synchronize two databases (apps) to have a backup or something running in a development environment, I suggest configuring replication between two databases. It would be much more effective to do it at the SQL Server level through the application of FDM, IMHO.

  Charles

• Recovering data using rownum cloum

  Hello
  
  
  
  
  
  We wanted to table it contains 6216 total records
  
  I want to recover the data using rownum column between 6186 and 6126
  
  
  How can I write the query to retrieve the data?
  
  
  Thank you
  Regarding
  A Z
  
  Published by: user3308982 on March 26, 2011 14:09

  the custom of above query works. Try this, you will get the desired result, you want

   select * from (select p.*, rownum rnum from (select * from test) p) where rnum between 6189 and 6126;
  

  example of output

  SQL> run
    1* select * from (select p.*, rownum rnum from (select * from test) p) where rnum between 15 and 30
  
          ID       RNUM
  ---------- ----------
          10         15
          10         16
          10         17
          10         18
          10         19
          10         20
          10         21
          10         22
          10         23
          10         24
          10         25
  
          ID       RNUM
  ---------- ----------
          10         26
          10         27
          10         28
          10         29
          10         30
  
  16 rows selected.
  

  Reference:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:127412348064

  Published by: rajeysh on March 26, 2011 17:09

• JDeveloper 11.1.1.2.0 - Panel dashboard with data from SQL Server 2008

  Hi all
  
  I use JDeveloper 11.1.1.2.0 and trying to create a cross-application dashboard. This dashboard would show 2 group of data from an Oracle database (already finished it) and two from the Group of data from a SQL Server 2008 database.
  
  I managed to install a SQL Server 2008 database locally on my machine. I downloaded the JDBC drivers on the Microsoft site and I have two JAR files:
  * sqljdbc.jar
  * sqljdbc4.jar
  
  I created a SQL Server login in Control Panel connections JDeveloper and can I query my database successfully.
  
  I created a new module of the application and define his connection for a JDBC connection with identification information specified on the Connections tab. I then added the two JAR files as libraries in the model project and
  has run the tester Module of the Application. This succesfully shows some records.
  
  In the draft opinion, I created a new page and dumped the View object in a table. I then go to run the page and get an error related to the drivier JDBC is not found. I read a few posts on add to Weblogic lib files and edit the startup scripts, but can someone give me a definitive solution to work? I also tried to change my Application Module using a data source, but I also have the same problem the Weblogic console (it cannot create a data source for SQL SERVER because it doesn't have the drivers).
  
  Any help is greatly appreciated.
  
  Thank you

  The built-in driver MSSQL weblogic.jdbc.sqlserver.SQLServerDriver class is packaged in \wlserver_10.3\server\lib\wlsqlserver.jar