M40-136 without wireless/Bluetooth/printer
Hi all
New new without wireless/Bluetooth and the Machine.
Have the machine wireless to connect to the Internet.Works fine.
However I have an Epson Photo printer, which is compatible with a Bluetooth adapter that is available only to Epson, M40 my bluetooth is possible Bluetooth by adding a Dongle?
By adding the Bluetooth capability to M40 it would cause problems with the wireless connection?
I want to only use BTooth for printing.
Need to do this, that we're heading where space is limited and I don't want to run wires everwhere!
NB. post is in both wireless and bluetooth forums
Help!
Hello
You can use the USB stick Bluetooth and if the configuration is just to avoid any problems. Please check if Toshiba Bluetooth stack is already installed on your device. If so you can use it for the Bluetooth connection.
I use the WIFI and Bluetooth on my Tecra and it works perfectly. Use of Bluetooth has no influence on the WIFI connection and you can continue to use it.
Good bye
Tags: Toshiba
Similar Questions
-
Envy 17 t-J100: how to install without wireless/bluetooth adapter...
Hello
Recently, I ordered the adapater without wireless/bluetooth for my PC laptop Envy Touchsmart 17. I just need to know how to install it. I've done this before on a very old dell laptop a few years ago but I want to make sure that I don't mess with anything bad.
Are there any illustrations or videos to guide me? Thanks in advance for your time and help.
Hello:
Here is the link to the service manual for your laptop.
It can be found in Chapter 5, R & R procedures wireless card.
-
Pls Help! Uninstall Intel without wireless/Bluetooth
Pls help! I try to upgrade to Windows 8 but Update Wizard says that I should uninstall "Intel proset wireless/Bluetooth" for reasons of compartibility. I used "Microsoft Fix IT" to uninstall. I tried the upgrade, and he says "Intel Wireless/Bluetooth to uninstall manually.
The problem now is that I checked the Add/Remove Programs to uninstall it, but can't find it. He is no longer with my installed programs.
PLS, can anyone help me? I don't know where to find it to uninstall it. I use ASUS A55VD-SX050V, Intel Core i7-3610QM, Nvidia Geforce 610, Windows 7.
OR IS THERE A WAY I CAN MOVE TO WINDOWS 8 WITHOUT HAVING TO GO THROUGH THIS STRESS SINCE I DON'T FIND IT TO UNINSTALL.
I was able to achieve by
1. use the Microsoft FixIt tool and uninstall the program.
2 reset
3. go in c:\program files\intel\
4 remove the Bluetooth folder.
If you can not remove the Bluetooth folder in step 4, and then see what file is open and kill this file from the Task Manager.
This allowed me to continue the upgrade of Windows 8, which was stopped by this driver intel.
Hope this helps
Concerning
Mustafa
-
T420 without wireless/Bluetooth
Is there a way to enable or disable the wireless/bluetooth radio when the T420 is connected and using an external keyboard? I can't open the cover on the T420 each time to use the Fn + F5 keys when it is docked.
Create a shortcut to C:\Program Files\Lenovo\HOTKEY\TpFnF5.exe, place it wherever you want.
-
Need webcam without wireless/Bluetooth for my booklet
Hello
I want to buy a webcam which is connection/wifi wireless or bluetooth for my booklet. Please could you suggest a suitable for this model.
Your help would be very happy.
Kind regards.Hello
There is no WLan or BT webcams in particular for Libretto laptops!
If you want to use a webcam Wifi/BT, you can use anyone who is compatible with your operating system.
Generally these devices support USB interface and you can connect it you little booklet. -
How to make the bluetooth printer or wireless active
I have a printer hp laserjet m1132. I have a wireless network in my house. How to use this printer through bluetooth or wireless connection. can I use a bluetooth or wireless cart to make this work. Please help me.
Hello
Its spaces, it must:
Connectivity
HP ePrint ability NO. WiFi functionality NO. Connectivity, standard Hi-Speed USB 2.0 port Connectivity, optional None To make this printer wireless, one option is to use a wireless USB print server, something like one of them:
My suggestion: buy a new printer, can end up better and not need to have headaches.
Another option If your caught router supported (can be used) print server USB and in this case, no need to buy the mentioned above device.
Kind regards.
-
Not 'add printer network, wireless or bluetooth printer' choice in Add Printer
· I am running Win 7 Pro 64-bit. When I go to devices and printers and select "Add a printer", the only option I get is to add a local printer. There is no other choice 'add a network, wireless or bluetooth printer. I have this choice on my other two computers running the same version of Windows 7. How to make this choice appears? I have the impression of sharing enabled.
Thanks for any help - bob
Hello
· The printer is installed on the system?
Method 1:
I suggest you follow the steps mentioned in the article which is given below.
The option "a network printer or a printer attached to another computer" is missing in the Add Printer Wizard
http://support.Microsoft.com/kb/2211432
Method 2:
Open Help and support andput this keywords "Find wireless and network devices to add to your computer ' and follow the first article. Follow the steps to open the help and support.
1. click on start and type help and Support in the research area, and then press ENTER.
2 type the keyword "Find wireless and network devices to add to your computer ' and follow the first item that is listed.
Method 3:
Step 1:
I suggest to uninstall the form the system printer and then reinstall it on the system manually. See the article mentioned below.
Install a printer
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
Step 2:
Enable sharing of printers and the discovery of the network. Check the items listed below.
Share a printer
http://Windows.Microsoft.com/en-us/Windows7/share-a-printer
Enable or disable network discovery
http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery
Now check if you are able to see the printer.
Step 3:
I suggest you to run a network troubleshooting utility.
a. to run the troubleshooter network, right click on the network icon in the notification area of your taskbar and then clicktroubleshoot.
For more information, see the article mentioned below.
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Is it better to buy a wireless printer or a bluetooth printer?
I would like to know if its better to buy a wireless printer or a bluetooth printer?
Hello!!
A wireless printer works faster because it has a data transfer speed faster than a bluetooth printer. So if you go with a bluetooth printer remember that printing may take a little bit at the end.
-
HP Officejet Pro X576dw: Wireless Direct Printing using the Lan cable
Hello
I buy HP Officejet Pro X576dw multifunctional on tomorrow. I understand that this printer has a direct wireless printing features that I can print from my tablet or IPad.
But I doubt if this wireless direct printing can be done while the printer is connected to the network via Lan cable permanately IPV4. This means I can print from my mobile phone at anytime via Wireless Direct without the Lan cable. Kindly advice. Thanks in advance.
David
Oh, which means that you simply unplug the Direct SSID wireless and you should be able to print via your router LAN cable now.
-
LAN wireless + Bluetooth on the desktop.
LAN WIRELESS + BLUETOOTH IS APPEARED ON EXISTING ICONS ON THE DESKTOP & CANT REMOVE BY CLICKING ON THE X IN THE RIGHT CORNER. LAN WITHOUT WIRE & WIRELESS ICON APPEARING ON PROGRAMS OPEN FOR EXAMPLE INTERNET EXPLORER. HOW CAN I REMOVE BECAUSE I HAVE THE PROGRAM ABOVE IS NOT NECESSARY
Hi Pooginagoricbythesea,
Follow these steps if you want to remove the device from the system tray.
1. click on Start > Control Panel > Bluetooth devices
2. click on the Options tab
3 uncheck the icon of Bluetooth in the notification area , and then click OK
If you want to uninstall Bluetooth
- Click Start, type Device Manager in the start search box and press OK.
- Expand Bluetooth Radios.
- Right-click each device listed under Bluetooth Radios and click on uninstall, and then click OK.
- Close Device Manager, and then click OK.
Similarly, you can uninstall the drivers for you to a LAN.
Expand the network adapters in the Device Manager and uninstall the drivers.
You can uninstall the application completely from Add/Remove programs.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-programHope this has been helpful.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
HP PRO 200 MFP 276NW WIRELESS DIRECT PRINTING PROBLEM
I JUST BOUGHT AN HP LASERJET PRO 200 276NW COLOR MFP PRINTER AND I DISCOVERED THAT I CAN'T PRINT DIRECTLY FROM MY LAPTOP. MY LAPTOP HAS A WIRELESS FUNCTION. HOWEVER I WAS ABLE TO PRINT FROM MY PHONE OF ZR SONY XPERIA. I TRIED TO REINSTALL ON MY LAPTOP SEVERAL TIMES BUT WITHOUT SUCCESS. HE ALWAYS SHOWS QUESTION SYMBOL ON PART OF TNE COMPUTER WI - FI.
SECOND, THE PRINTER USUALLY MAKE NOISE WHEN PRINTING. IS THIS NORMAL?
FINALLY. IS THERE ANY HP DESIGNATED SOFTWARE FOR PHONES TO WIRELESS CONNECTION WITH HP RINTERS TO RUN NORMAL PRINT JOBS?
ACTUALLY, I BOUGHT THIS PRINTER DUE TO THE WIRELESS FUNCTION. USE THE WINDOWS OPERATING SYSTEM 7.
I NEED HELP URGENT
Thank you
Thank you very much. I got on the question and my printer works perfectly. Your comment encouraged me to go further by performing for the solution sites from the center of the HP wireless printer and finally I found the solution. For the benefit of third parties. I uninstalled the software from my computer and started again. I then followed the procedure listed in the HP Center /HP wireless wireless direct print page.
Thank you
OLAAT
-
My wireless HP4620 printer keeps falling.
My wireless HP4620 printer keeps falling. I used the WPS button for a wifi connection. Tried to PIN verson also and same thing, the network connection drop after a few days. I have configure WPA2 authentication via the web interface, but does not seem to do anything. I have a model from Verizon Wireless Router A90-750015-07 number. Any suggesstion is appreciated. Thank you.
You can update your firmware printer through the web interface. When connected, get the IP address and use your browser to access, for example... http://192.168.x.x. From there, you can do the update of the firmware. BUT until you do that, go to the area of networking and configure your wifi connection and assign a static ip address and give it a DNS address (address of your router). You can't do the updte of the firmware without the DNS address. That's what did the trick, I think. Without the DNS, it will introduce the network every 48 hours (seems to). My printer has stay connected for a week now. Good luck.
-
Re: What is the difference between Satellite M40-103 & Satellite M40 136
Hi, can someone tell me what the difference between the two laptops;
M40-103 and M40 - 136.
They seem to have the same characteristics.Thanks in advance.
Hello
Yes, it is possible
In most cases, the laptop hardware parts are the same, but only the system language is different, it means that the two laptops could be released for different countries.But the hardware specs are the same
-
Satellite M40-136: network card is damage
Hello
I have a satellite M40-136, which is a little more than 2 years. I have cable broadband installed and this had led me to discover that I have a problem with my network card (a Marvell Yukon map I think).
I had guys on the network at work to check the laptop and they say either the network adapter connection is loose or the card is damaged.
I rang one of their guys said tech that I need a new main board because the network cards are integrated on all laptops and PC WORLD.Is this correct? If it is then it will cost an arm and a leg to fix it.
Nicky
Well, that's good.
Map of LAN (RJ45) is soldered on the motherboard.
Perhaps an independent technician with experience might be able to solve this problem, but in general, the motherboard should be replaced.The motherboard is one of the expensive parts and you are right; the new Council is costing a fortune
-
Satellite M40 - 136 product dvd recovery
Hello
I have problems with my laptop Satellite M40 136 I bought a year ago. If I close down the machine when I then turned it on it would give me a screen saying there is a problem in Windows and gave me the option 'Start windows normally', 'start with the last successful settings', 'start in safe mode', 'start in safe mode with networking' or 'start in safe mode with command prompt '. It would usually take several attempts before that Windows would fire up ok, any option to choose. However yesterday any have repeatedly tried it would not be in windows.
I decided that I need to use the dvd - rom product recovery is a relocation complete (fortunately I had saved my personal files). I did it, but at the end when he says 'ctrl-alt-del"to restart, reboot I got the same message"problem going into windows"with the same options. I repeated the recovery process 2 more times with no luck.
This morning, he did go further and asked me to go through the installation process of Windows (i.e. giving the phone a name, asking if I wanted to save the machine with toshiba/microsoft etc.) However he then pop up with the message "problem going into windows" with the options that I mentioned earlier. I choose any option that he ends up back on the same screen.
Does anyone have any suggestions?
HI Nicky,
It is possible that you have a problem with your hard drive. The operating system will always be usually resident in the same sectors of the hard drive even after a re-installation using your recovery CD, the same sectors of the hard drive will be used to store the files of the OS.
I suggest that you try to run a CHKDSK/F on your hard drive to see what it brings. Of course id there are lots of bad sectors then will consider you replacing the hard drive.
Kind regards
Maybe you are looking for
-
Install LV2009 SP1 - generator of Application activated but does not
Installed the SP1. Have activated the application builder in the License Manager. Always impossible to run a build. I see the yellow exclamation on my generations within projects. I tried many repairs and de-activations and re-activations. I trie
-
URGENT blackBerry smartphones HELP Please someone
Hiya since I up graded world 6 blackberry app on my phone version, most of the time it doesn't allow me to him at all and when I get manage to get it does not work properly, I have major problems telling me unable to act etc, the old version was much
-
x 0 x 80010108 error uploading photos from SD or SDHC cards
original title: x 0 x 80010108 error How this problem alone. I can't download pictures from an SD or SDHC card. Concerning Chih Chiang
-
Lightroom 6 can be purchased on a CD. I have slow internet satellite?
Slowly, I have satellite internet with download limits. Lightroom 6 can be purchased on a disc? I have 4 Lightroom and need an upgrade.
-
New update of photoshop 2015 seems to run something in the background
Hi people,After that I updated the photoshop yesterday, now when I open it seems is running something on the bottom, the change of the cursor permanently. Someone had this problem too? Any thoughts?Thank youAlexander