Recovery bios Lenovo u410

Similar Questions

• Can not enter Boot Menu Lenovo U410 Touch Windows 10

  Going to be crazy about it. Tried to do almost anything to get into my BIOS Menu:

  1) enter the BIOS through Windows 10: Systemsettings-> Recovery > UEFI
  + Quick start disabling
  + Safe mode
  DOES NOT. Normal startup.

  2) enter the BIOS via Novo Button > by selecting the Start Menu
  + Safe mode
  DOES NOT. Normal startup. (Only SystemRecovery works)

  3) enter the BIOS via shortcuts (F2 / Fn + 2)
  DOES NOT. Normal startup.

  I could not find any file flashing BIOS for Windows 10 and to be honest, I don't want to Flash my BIOS.
  So please help me as soon as possible. Already lost 4 h on this topic.

  Problem solved: update the BIOS does.

  Unfortunetaly Lenovo does not offer a one-click - Update BIOS for U410 Touch. But it also works with the U410 (without contact).

  Download it here:
  U410 BIOS update

• Everyone was able to solve the driver problem in laptop LENOVO U410 of windows 8?

  My bluetooth does not work.

  I downloaded this software

  

  But my bluetooth option looks like this

  

  Someone had this problem?

  No touchscreen laptop of LENOVO U410. WIndows 8.

  Hi netdeamon,

  Thank you for using the Community Forums of Lenovo!

  I have seen questions like that and it is thanks to Incompatible power Managerment.,

  -Try to uninstall Lenovo energy management in your PC under Control Panel / programs

  -Then try to install this Version,

  Lenovo Energy Management
  cagt32ww.exe
  21.3 MB

  After Installation and reboot, press on (Fn + F5 / F5) to access wireless setting, then turn on your WiFi and Bluetooth

  see if it works.

  Best regards

  Solid Cruver

• Lenovo U410 battery sharp fall to 0%

  Hi guys n girls.

  I just Lenovo U410 Windows 8 in February 2013. This afternoon, when I was using the laptop in power saving mode, I was able to use an hour from 60% to 48%. After checking the battery percentage when he was at 48%, 5 minutes later the low battery warning showed by saying that the laptop has 6% left, then he stops himself.

  Here are the situations:

  I use it rarely and I left it for 1 week more, and two days ago, that I used it for 15 minutes and then I took out n used today.

  I used it in power saving mode.

  I was running Windows update.

  Steam was updated.

  I was running OpenOffice.

  Is this normal? This happens to others? Is there a way to fix this?

  Thank you

  Hi evanicle,

  While they inspected the Lenovo Energy Management, the battery meter is located at this place (see spoiler)

• I have a M8400f desktop. If I do a recovery, bios will be be recovered to the original?

  I have a M8400f desktop. If I do a recovery, bios will be be recovered to the original?

  Hello

  If you can access the options you need, I wouldn't worry too much - I hope that you will find that the problem with the start screen will be fixed in a future update.

  All the best,

  DP - K

• Lenovo U410 - cannot access BIOS

  After I pressed Fn + F2, the message in the lower left corner changed "press fn + f2... "to"pending ". But then, it accesses the windows system.

  I also tried with F2 without success. FN + F12 does not even change the message to the start screen.

  I suspect it has something to do with UEFI-mode Setup of Windows 8. Since then, I have this problem of BIOS.

  Try to disconnect the battery of the BIOS as well as any other power source. It shows a checksum error and the message "Press F2 for boot options." If I press F2, but it just goes back to Windows again. After that, there is no error message more, but the problem is still there. Nothing changes fundamentally.

  Is any method of recovering the BIOS for this laptop available? There is still no BIOS file official website but.

  
  

• Key issues of a recovery/key - Lenovo Y50

  Hello.

  I have a few questions about one of the keys.

  My laptop came with windows installed 8.1, and all drivers installed - to make sure that I've updated all the drivers via the Lenovo Web site and my via the website of nvidia graphics card driver.

  1. nothing happens when I press on the button recovery, when my computer is on - is this normal? Will not it pop up with a few options to restore or something? At least it should open the one touch application, right? When I press on it when the computer is off, it starts up with a BIOS screen with multiple options - everything as I thought it would be, so I guess that works very well.

  2. I did a a key backup through the application of a single key, I recorded it on my SSD drive since it is the only drive I have currently, although my SSD is great of 256 GB, I have also a small drive called "LENOVO", which contains the drivers etc, but it is 25 GB of big - I read somewhere that this disc has been lying for the backup of a key , but my current backup fills with 50 GB twice the capacity of the disk D: - is anyway I can make it smaller, or should I just get rid of the D: drive? In this case, how?

  My one key application is Version 8.1.0.2619

  I thank you for your time and have a nice day!

  Cheers - Simon

  When you are connected to Windows, press ANY BUTTON will do nothing.

  To start under Recovery there are options in the control panel or the Menu of charms. or as you did stop and press the NOVO button.

  The D: contains the drivers for Lenovo, is NOT the recovery partition. The recovery partitions are hidden and cannot be seen in Control Panel > administrative tools > disk management

  To make the best use of one key you create a recovery drive/USB disk.

  It is not a backup of the system, but it is a recovery disk and must fit in a 16 GB USB key.

  See the User Guide-

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_y40-70_y40-80_y50-70_y50-80_y50-70%20touch_y5...

  And manual-

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_y40_50_series_hmm.PDF

• Password bios Lenovo B50

  Hi, I work in a school and one of our students has managed to put a bios password on one of our new laptops of Lenovo b50-80. Start the laptop, bios application "password disk HARD security." We're not sure how Flash the bios to reset it - how can we do this? We have tried to remove the CMOS battery and took the laptop apart to see if there are jumpers, but there isn't.

  Any help would be great. Thank you

  I was hoping you'd be able to boot into recovery mode using the "Novo" button located on the right side, near the USB port. With the help of this button to start the laptop should put you in recovery mode (recovery of key) that is integrated with most of the units.

  If this does not work, the only two choices are to recover the password set by the individual or have the computer repair at a local authorized store.

  Go further, setting a master password for the BIOS entry may be something that you should look at. I suggest to download the user guide / manual and reading on the password levels available service. -IMO contacting parents and informing them that they would be responsible for the costs repair / replace the notebook can also be something useful - your call.

  Good luck.

  CB

• Failure of the BIOS Lenovo M90

  Hello.

  I would like to know is there a method to recover the BIOS of Lenovo M90 5474?

  As for the AMIBOOT will. ROM method with CTRL + HOME runs on this Machine?

  Or is the a recovery method of block startup that don't need to unscew the machine?

  We hope to get an answer as soon as POSSIBLE.

  Thank you.

  guyz92, welcome to the forum,

  There is a method to boot block recovery, please see the hardware maintenance manual which can be downloaded by clicking here.

• Recovery BIOS for Satellite U400 - 138 PSU44E

  Hello

  I could not with update of the bios that I had taken the official support page from toshiba bios file. I don't know that I had chosen the right bios file. But something is wrong and my laptop is brick, and now.

  I'm trying to recover the bios with Phoenix crisis recovery. I tried 2-3 varieties of the recovery from the crisis.

  I have a backup of the old bios, stable, so I'll try to recover with this old bios file. I tried Win + B, FN + B, Win + F, F + FN, Fn + Esc, keystroke U for the recovery from the crisis.
  Furthermore, I use 1 GB drive/usb formatted FAT for this purpose. The machine will beep every time, and I'm waiting for 10 minutes or more after the beeps.

  I put the file of bios on usb drive with a lot of names "bios.wph", ".fd", "bios.fd". Also I tried to use the usb disk, the bios file is 2 MB, so I couldn't do it.

  I also tried the insyde recovery solution. I don't know the name of the file for recovery.
  I looked at the file of bios with a hex editor, but I did not find the name of the file (for example bios.fd or something)

  Please * don't * suggest to send laptop for service solution. I have to remedy in * 1-2 days * and the service is so far away from me and they work slowly. If I send to the service, I will not take the laptop for 2 weeks.

  What can I do, what is the procedure of work? If toshiba allow us to update the bios, they must support for the recovery, too. ASP is not a solution for every time.

  * Any * help will be appreciated.

  Best regards.

  Jin

  You should visit this site:

  www.theeldergeek.com/forum/index.php?showtopic=21209

  There was the user that was able to recover his above mentioned a500 forum reading.

• Recovery BIOS ThinkServer RD630

  (3) copy amiboot.rom in the root of a USB key (it doesn't have to be bootable).

  (4) turn off the server (if not already).

  (5) turn the dip-switch number 1 BIOS recovery on IT (top) position. (location of the dip switch located on the lower part of the cover of the server).

  (6) USB key insert with amiboot.rom into a USB port on the server.

  (7) power on the server. The screen will be black for a minute, and you will hear 2 beeps.

  (8) when ThinkServer logo is displayed, press F1. Server continues to start the Setup program.

  Here's where he goes wrong, all I get is a simple blinking cursor.

  Funny it is starting the server perfectly. The only way I found out there was a problem is that I had to set the IP BMC etc.

  This is the same problem that

  ThinkServer RD530 BIOS Recovery as of 14/02/2014?

  never is the procedure below...

  (9) configuration screen appears and the BIOS flash should start automatically. Wait for flash finish.

  (10) when the flash is complete, the server will restart - turning the server off.

  (11) key USB remove server.

  (12) flip the Recouvrance BIOS switch dip 1 OFF position (down).

  (13) power on the server.

  Solution to this is to update the firmware of the LSI, and then you can go back into the BIOS again.

• Recovery BIOS on Satellite C660D

  Hello

  I recently tried to update my bios (because I got a message from tempro tell my TI needed updateing) who left my laptop C660D effectively dead - blank at the start to the top.

  I am trying to create a crisis recovery disk and the direction I got on the net tells me I need to extract the. The correct BIOS ROM file update for my laptop and add it on the crisis recovery disk.

  However, when I unzip the update of the Bios for a c660D Tosh, I see that there are 2 folders, each with 2. ROM files in them.

  File SAY

  BIOS.rom (2048KB)
  EC.rom (128KB)

  Dossier UMA)

  BIOS.rom (2048KB)
  EC.rom (128KB)

  The files with the same name in both folders watch identifical to one another. but can someone counsel who is the good ROM I should fall on the crisis recovery disk

  Thank you very much
  Eddie

  Hello

  From my point of view regardless of its file BIOS.rom you will take for two looks identical

• Update the BIOS Lenovo G505s

  Hi all!

  I have really big problems with my laptop Lenovo G505s.

  (A8 - 4500M, 4 GB ram, 7640 G + 8570 M, windows 7 Professional)

  I have about 20 to 25 frames per second in every game when my charger is plugged.

  When I plug it on, I get around 80-90 FPS boost.

  I did research in many forum and allowed for some people that they have updated the BIOS.

  I tried to update the BIOS, I found it (v3.0), but for Windows 8 and 8.1.

  Is it compatible with Windows 7?

  Can I do the damage in my laptop if I install who?

  Help, please!

  Already installed, works very well with Windows 7.

  All FPS problems seems to be missing.

• helps recovery Bios X121e (x120e x130e)

  Hello world. After my x 220 thread was left unanswered, I hope I will have better luck with it.

  I need the procedure for recovery of bios for x121e (x120e, x130e).
  IM in brick, and no method found in guides for wincrisis do not work. I think that I can't enter the bios recovery mode no mather who combinatiom of the keys I use. Nothing happening just to the fan spins and the laptop does not read my USB (usb led flashes for less than a second and that's it.

  It would be very useful to anyone recovered x121e post here.

  It means anything, its with amd e450 apu and its Japanese version, which has the Japanese keyboard.

  Kind regards

  [Solved]

  The fixed!

  So for everyone with the same model and same problem: it turns out that this bios don't really boot block. If the bios failure = brick Clipboard without recovery options.

  But here's how I solved mine. Bought a SPI programmer, ic clip (soic8), some test wires and fact adapter to connect the programmer ind clip. Had some problems and also had to change downloaded bios because I didn't have the right backup but after little playing, he shot straight up. If you have good rom backed up, flashing should be easier. It is the solution for those who have more technical, but much easier than the chip soldering skills.

  [url =http://postimg.org/image/646cgp0kr/] [img] http://s25.postimg.org/646cgp0kr/IMG_20150220_215643.jpg [/ i... ]

  [url =http://postimg.org/image/5ov2noenf/] [img] http://s25.postimg.org/5ov2noenf/IMG_20150220_215632.jpg [/ i... ]

  [url =http://postimg.org/image/jjtd6592j/] [img] http://s25.postimg.org/jjtd6592j/IMG_20150221_022114.jpg [/ i... ]

• WinRE disabled after resizing partition recovery of Lenovo and OneKey Re works

  System: Lenovo Yoga 700-14ISK 80QD

  The almost 4 GB of free space on the partition of Lenovo have been very tempting, after researching if it is safe and also, I decided to give it a go by using a 3rd party free software has saved me several times in the past (MiniTool Partition Wizard). Interesting that most tutorials on create a recovery drive and the removal of the partition, but I decided for now to get just the free space until it takes more, and I did not find that resizing with 3rd party software will mess up your WinRe settings only once this has been done. Here's the info of the agent:

  /Info C:\Windows\System32>REAgentC
  
  Recovery environment Windows (WINRE) and system reset
  
  Information:
  
  Status of Windows RE:         disabled
  
      WINRE location:
  
      Identifier of the Configuration Data (BCD) of startup: 47251840-c09c-11e5-af06-00808a8e1ce5
  
      Location of recovery image:
  
      Image Recovery index:      0
  
      Location of the custom image:
  
      The index of the custom image:        0
  REAGENTC. EXE: Successful Operation.

  After resizing and the recovery agent control, I realized that I lost details such as the location of the partition, offset and id. After changing the System32/recovery with outreach and id ReAgent.Xml it was not enough to allow that the path for the location of winre etc miss me him.

  This is what my file looks like now:

  Can someone help me and give me the necessary adjustments?

  My laptop works fine and OneKey recovery works well, except that I cannot create a recovery drive more. Thank you.

  After watching my partitions and shifts again, I modified the agent accordingly re and now I am able to create a recovery drive.

  Solution:

  1. Mode of high open CMD
  2. type diskpart
  3. partition of type list
  4. use select partition = x where x is the number of the partition that you are interested to see the details
  5. partition detail to see GUID, offset and other type information
  6. Type exit
  7. Change Windows/System32/Recovery/ReAgent.xml
     • Change path, offset, and guid for tag WinreLocation
     • That's why your score are hidden to make sure that the path looks like this:
       • \\?\GLOBALROOT\device\harddiskY\partitionX\Recovery\WindowsRE
       • Where is the number of hard disk - usually so unique 0
       • Where X is the partition for WinRE number determined in step 4
     • Apply the same logic to PBRImageLocation tag to partition LENOVO_PART
  8. In CMD type reagentc /info and now you should be able to see your location
  9. If step 8 failed try reagentc first enable and repeat step 8
  10. I don't know if it is relevant or not, but a computer restart might help and repeat steps 8, 9