Red masks and turning Widget

Similar Questions

• HP DC7600 - will not turn on, red light and beeps.

  Hello

  In my office, that we just moved all the furniture around, all workstations have been displaced and worked fine before the move.

  One of them now won't start, its a flat Tower HP DC7600. She now does when you press the power button, is flashing a red light and a beep 5 times. Then do the same thing again and again.

  Any idea as to what could be the problem?

  Thank you very much

  Ben

  It sort!

  Red Power LED blinks 5 times, once every second, followed by a pause of two seconds. Beeps stop after the fifth iteration but LEDs continue until the problem is resolved. Out of memory error video pre 5. 1 reinstall the DIMMs. Turn on the system. 2. replace the DIMM one by one to isolate the faulty module. 3. replace the third-party memory by memory HP. 4. replace the motherboard.

  Thanks for looking anyway!

  Ben

• Seting keyframes to move a mask, what are the Red handles, and why can't I move the mask.

  So, I have a mask I want to track manually. I put a keyframe, and then as soon as I move down the clip in time, the handles on the mask all the Red Tower, I can't move anything. What is c.

  I must be in Auto key. If is not very intuitive to manually follow a mask. Can someone explain what I got. When I put a keyframe, it also always affects a red keyframe at the beginning of a clip.

  OK, so if I put on auto and then change the mask a little to set the first keyframe and make a few adjustments it works fine. TEEN Style!

  I guess that's the best solution. Use Auto and adjust as required.

  But for reference, what are the Red handles that is supposed to mean. And is there a tutorial for manual monitoring mask.

  Also how do a mask drawing good hand, when I click on the + curve and make points, then the expanded mask gets all hexagonal... What is happening with that. you have to start with a round mask and add points and tweak from there to make a mask customized with adjustable smooth edges?

  Seems to be the only way I can hack through for now. Again, please to a good tutorial on the masks and the points, I have an account of Linda, if that helps.

• The red color does not print correctly. Have just replaced the Red cartridge and the problem remains

  HP Color LaserJet 2600n, Windows 7 64 bit

  The red color does not print correctly, it of a weak orange and turn yellow on the edges.

  The problem is, even if we just replaced the cartridge.

  The other colors are fine.

  I'm sorry.  It's a consumer forum and your printer is a product of the company; would be better served on the forum planned for it.  The business forum will be experienced in printers of business community members and expose the post more than members with the knowledge needed to answer.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UDQAKt2PUaA

• How can I disable the "red mask" while using the gradient filter...

  When I use the gradient filter, the red mask appears indicating where the setting will be affected... but I can not disable it to view the live settings, while I make adjustments to settings...

  How or where can I find the switch to turn off the "red mask"?

  Press the 'o' for overlay power

• problems with masking and color CC2014 - no CC - see screenshots!

  Does anyone know this problem? In recent weeks, masking and using colors in CC2014 seems to work although more. When 100% of mask the masked layer is always displayed. When I use a color (with the pen or mouse) PSD slightly changes the color.  I am attaching two prints to show you what I mean. Did the same in PSD CC and there is no problem at all.

  

  Sound your layer mask.  This is not completely its not completely masking the area.  The black area is not 100% black his only reduce the transparency of the atea sahpe filling.  Just turn off the visibility of the cyan shape layer you will see that it has nothing to do with that layer and its surly white not the projection of bottom layer.   I use a setting of levels on your layer mask to darken the dark. Look at the result.

  

• Why didn't I go and turn my Airport Time Capsule to be able to backup?

  Hello.

  Why didn't I go and turn my Airport Time Capsule to be able to backup? It has been like this from day one. At the point where I keep my iMac off for a few days, my Time Capsule airport must be enabled and the new in order to save. Any suggestions?

  Concerning

  Simon

  Hello Ladro Maltese,

  Thank you for using communities of Apple Support.

  If I understand your message when you shut down your iMac a few days and then go back on you have to turn off your Time Capsule, then on again as well. I know how it is important for you to be able to have your Time Capsule works well. The first step that I recommend is to make sure that your Time Capsule firmware is up to date.

  This article includes information about how to manually and automatically check updates the firmware for your Time Capsule:

  Keep your base station to day.

  After updating the firmware see if the problem persists.

  Best regards

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• I got the message "SIM failure" on my IPhone 5.  The first time, I turned the phone off and turned it back on and it started working again.  I got the same message today and by turning the phone then next turn did not eliminate it.

  message "SIM failure" of "no SIM".  1st time it happened I turned the phone off and turned it back on and it was OK.  It happened again, and this time cut off and back on does not the phone is working correctly.  Cannot make or receive calls.  Nothing has ever changed with my carrier.

  First get a replacement SIM from your operator. If this does not fix it you have a hardware problem.

• indicators red green and yellow are grey, I have accidentally uninstalled something in the "login items", but don't know what or how to replace. Thank you!

  indicators red green and yellow are grey, I have accidentally uninstalled something in the "login items", but don't know what or how to replace. Thank you!

  You have probably changed the OS X. go theme color in Preferences-> general systemand pass ' appearance: " "Blue ".

• iPhone 6 more issues of button "home" and turn off the questions

  I have two separate issues with my iPhone 6 more

  9.3.2 software (updated to try to solve this problem - question began before the software upgrade)

  My iPhone only more 6 works randomly.  I'm still able to make calls and use the phone, but the phone is constantly interrupted by these two questions.

  "Slide to turn off" or button 'Cancel' at the bottom

  (1) the phone asks me to "Slide to Power Off" - at the top of the button slide phone - with a cancel downstairs.  Slide and turn it back on does NOT resolve this problem.

  "Home" button is to take a screenshot of my current screen randomly.

  (2) when you press the button of my house, he takes a picture of my current screen instead of Act works as a home screen button.  This can happen 1 time or 10 times in a row before the home button functions correctly.

  Here is a screenshot of the camera to illustrate various photos taken.

  

  I did all the updates

  I did tap hard downs

  I backed up my phone and tried to reset to factory settings

  These are the questions randomly but are very common - a question of these two issues with caused during the use of the phone to navigate or "Slide to power off" appears randomly if the phone is not in use.

  Please help with any suggestions!

  Your sleep/wake button is pressed somehow. You have a form any case suitable for your phone that covers this button? If not, the sensor that presses the Sleep/Wake button against is missed ignition. As you even tried a factory restore, it may be clear that the problem occurs because of a case that is pressing the button somehow or the switch has gone bad.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works?

  Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works? Basically, if I'm ready to get up and there are 4 minutes remaining on the countdown of repetition which is the fastest way to 'Cancel' the snooze and alarm?

  There isn't a way, I discovered that allows me to do without invoking the alarm and the alarm clearing application

• Qosmio F20-154: BSOD and turns off

  Qosmio F20-154 goes to blue screen and turns off if the cd is inserted or if the flash drive is inserted
  Also hotkey error on turn on the computer

  Hello

  This means that you can not read data CD or USB key?
  Is this correct?

  Have you tried to boot from the CD or DVD?
  Have you tried to reinstall the OS?

• What happens if your phone gets wet and turn it on

  What happens if your phone gets wet and turn it on

  and how to fix

  If you try to turn it on it is still wet, the battery power could fry the material inside the iPhone. Electricity + water =

  Do not power it on until you have let it dry for a few days. Some people use bags of rice, but I recommend what rice can get stuck in the helmet and refill holes. Use rather these silica packets that come with clothes and shoes if you have. Place the iPhone in a bag with the packages. They absorb water much more quickly, then the phone leaving aside to dry.