Invalid partition table appear on my HP a1700n

Similar Questions

• Qosmio x 500 - 14W - invalid partition table

  Hay guys,

  I wanted to start my Toshiba Quosmio x 500 - 14W PQX33E (Product Code), but the only thing I found on my desk: invalid partition table.

  In another Forum I found a threat, which means I have to restart my computer. So I tried a Reboot Cd, but found nothing. Then I tried to call the Call Center of Toshiba, but they are closed...

  For me, is the Toshiba Service miserably and I hope that some guys from the Forum can help me.

  Thank you
  Paul

  Hello

  You must install the operating system once more.
  Invalid partition table means that something is wrong with the HARD drive and the operating system cannot start.
  So if you n t have a recovery disk, you must order one:
  http://backupmedia.Toshiba.EU/landing.aspx

  PS: I made good experience with the Toshiba service comparing the service with another laptop from the manufacturer I have to say that s OK and I meet a lot of people who said that other manufacturers are not really better
  Which; s my opinion

• invalid partition table

  invalid partition table is displayed on my screen, pl help out me...

  Exactly what happened before you saw the error message?

• After reinstalling Windows on Linux invalid partition table

  I got an operating system linux on my pc, then I tried to install windows along the side with linux, so I put my windows cd in the drive and follow the steps, the first steps were well made, but when the pc restarts, it is a message (invalid partition table). p.s. I formatted the c partition and it did not work, so I deleted and made a new partition in unallocated space and there do not have too much work, help?
  Another PS it is no os can I enter on my pc.

  If you deleted all the partitions of the hard disk using Linux, then you should be able to put your Windows install disk, boot from it and install Windows.  The installation procedure needs to configure your hard drive correctly for Windows.

  -JW

• I used the system repair program, it says it succeeded, but I get the same message... "invalid partition table".

  I worked on this for 2 days now and I don't know what to do. I have never had any bad problems with my computer far. I did not have my original installation cd and don't know anyone to borrow an of. I get as far as... choose my operating system and the box is empty. I am lost at this point. Help, please.

  Thanks in advance.

  I just looked at the link you have provided previously. Good information. I get into the BIOS and I have this info. I agree with you that I should get comfortable or pay someone who is. Laughing out loud!!! I've contacted the information I have and see where that gets me. When I put the discs I get to where it asks 'where I want to install windows. The box is empty... no location. Bottom of the screen says 'no found record', ' click on load a driver to provide a disk for installing mass storage. I can't go any further.

  Sounds like get you into the BIOS, there may be no player listed.  A hardware failure is likely.

• Apsire 8951G - Tbl of invalid Partition without recovery disks

  I have a give me a "invalid partition table" 8951 G-9600 to Aspire on initialize to top.

  I lost my recovery discs.  Can I order new ones?

  I am convinced that you can. You need your number series, but here's the Web site.

  https://store.Acer.com/store?action=DisplayDataValidationServicePage&env=base&locale=en_US&siteid=AC...

  Far as you can call Acer directly.

• Move the partition of the table and get ORA-14006: invalid partition name

  I'm using oracle 11.2.0.4 and I am trying to move a partitioned table to one tablespace to another.  I checked may times and I have the correct table name and the name of the partition.  However, I get the error ora-14006.

  Can see everything what could be the problem?

  SQL > ALTER TABLE GWPROD. QRY_TES_ROLLINGCUREDITS MOVE PARTITION 201112 TABLESPACE GW_PROD_T2 PARALLEL (DEGREE 4) NOLOGGING;

  ALTER TABLE GWPROD. QRY_TES_ROLLINGCUREDITS MOVE PARTITION TABLESPACE GW_PROD_T2 PARALLEL (DEGREE 4) NOLOGGING 201112

  *

  ERROR on line 1:

  ORA-14006: invalid partition name

  Thanks in advance.

  Names that begin with numbers are not legal partition names. A fool created by placing them between double quotes. You will need to do the same.

• Invalid or corrupted partition table esxi 4.1

  Saludos a todos,

  I have a problem with updated esxi 4.1

  (1) hize los raid desde cero con 1 totally controladora del servidor are only estos wont tenian esx 3.5

  (2) do los HBA 'fibra puertos '.

  (3) comenze the instalacion of esxi 4.1

  Instale esxi 4.1 en unos servidores dell 2950 instalacion comienza normal sin errores despues of the instalacion me of that review the HCG en vmware.com

  y if the small supports esxi 4.1 version

  entonces sale me una opcion reparar y disco y reparar el disco después pulled me this message

  Invalid or corrupted partition table, your server has been put into audit mode you have recreated the partitiond on your disk manually

  depues of esto el Server pide el reboot y el Server inicializa pero normal al puro final al da UN error con letras rojas pero too rapido para despues el Server levanta although tighter is configura y todo normal sin problemas, pero if is reincia el server is pierde config 'tcp/ip', 'dns' etc.

  hecho el proceso instalacion achieve several veces y da el mismo problema

  tambien trate recreear las recording manualmente por consoled pero no lo prevalence

  his las particiones than veo desde estas consoled her

  
  Device boot start end blocks Id system
  /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p1 5 900 917504 5 extended
  /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p4 * 1 4 4080 4 FAT16 < 32M
  5 254 255984 6 FAT16 /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p5
  255 504 255984 6 FAT16 /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p6
  /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p7 505 614 fc 112624 VMKcore
  615 900 292848 6 FAT16 /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p8

  Saludos,

  Hola Warrenjc:

  What controladora disco tiene ese servidor?

  Probaria an instalar ESXi in a nightclub RAID sin unico y falla test TR an instalarlo UN USB en. Of este modo can detectar el fallo viene por controladora Quebec City if no este soportada.

  A greeting.

• after image restore, backup partition table is different

  Hello

  He is a 2012 Macbook mid Pro with El Capitan and Bootcamp.

  After repeated with Bootcamp (Windows 10 Pro) problems I started using Image of Terabyte for Linux in order to safeguard this Macbook. Forums terabyte that people know that the Image of Linux (such as Image for Windows) is able to create a reliable backup, but also to restore - restore an entire disk image or restoring individual partitions.

  I followed their instructions precisely and activated the two options "restore first Beach" and "TPG hidden OS" (as one terabyte official, Member of the forum wrote) when restoring a partition.

  Unfortunately, it did not work! Bootcamp was no longer visible in the start screen or wasn't visible, but not start.

  What I found was that I had to keep the two options (see above) with DISABILITIES.

  Then I could restore some partition images - and 10 Windows in Bootcamp is bootable.

  Well, it was the long introduction.  I'm sorry.

  Now my question is:

  Is this something that has changed my partition table?

  Before restoring an Image for backup of Linux for the first time, I had this partition table:

  localhost: ~ root # fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AF 1023 254 63 - 1023 254 63 [409640-857906448] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [858316088-1269536]

  * 04:07 1023 254 63-1023 254 63 [859586560-117186560] HPFS/QNX / TO THE

  BUT:

  After failed attempts to restore and work finally restore my partition table operation is different:

  Fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 1023 255 63 [1-409639]

  2: AF 25 102 15 - 1023 255 63 [409640-857906448] HFS +.

  3: AB 1023 0 57 - 1023 255 63 Boot Darwin [858316088-1269536]

  * 04:07 1023 199 8-1023 255 63 [859586560-117186560] HPFS/QNX / TO THE

  Everything seems to work fine, but I wonder if the different appearance of the partition table can be a problem?

  For example, compare:

  1: EA 1023 254 63 - 1023 254 63]

  3 o

  409639]

  TO

  1: EA 0 0 2 - 1023 255 [63 3 o 409639]

  It's the output of 'diskutil list ':

  localhost: ~ root # diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 439,2 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 60.0 GB disk0s4

  And the output of 'TPG - r - vv show/dev/disk0':

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 857906448 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  858316088 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  859585624 936

  859586560 117186560 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Out of 'gdisk/dev/disk0:

  localhost: ~ root # gdisk/dev/disk0

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: hybrid

  BSD: absent

  APM: absent

  TPG: present

  Found a valid GPT with hybrid MBR; using GPT.

  Command (? for help): p

  Disk/dev/disk0: 976773168 sectors, GiB 465.8

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 38A2E667-6E00-4C0F-BD78-C95979E3CFAE

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 976773134

  The partitions will be aligned with the boundaries of sector 8

  Space is free total 957 sectors (478,5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 MiB EF00 EFI 200.0

  2 409640 858316087 409.1 giB AF00 Macintosh HD

  3 858316088 859585623 619.9 MiB AB00 Recovery HD

  4 859586560 976773119 55.9 giB 0700 BOOTCAMP

  Any ideas?

  Another question:

  Is it possible to save the table to partition like that?

  DD if = / dev/sda of = gptandmbr bs = 512 count = 34

  Thank you very much

  NEUMAC

  In Fdisk, the CHS numbers are arbitrary on modern disks. They are the time of BIOS and old disks with CHS geometry. Puts BCA from Mac 0-1023 (1024 cylinders), 0-255 (256 heads) and 0-63 (64 sectors). Modern disks far exceed those numbers and would drain them. Must match what is the triplet of start/end/size and it fits in GPT and MBR. You can put arbitrary 0,0,0 for CHS and you will see all issues on GPT disks.

  Please do not use TBIL to restore W10 to circa 1970-80 disks.

• Partition table / no entry of safe mode

  HERE'S MY QUESTION:

  I'M TRYING TO RECOVER MY XP DESKTOP COMPUTER. WHENEVER I TRY not to enter MY "SAFE MODE" VIA THE XP CD I GET NO PASSAGE. NORMALLY I CAN GO THROUGH LOG BUT I'VE NOW DAMAGED A PARTITION. I USED THE HELP FILE (FIXMBR) HERE IS THE MESSAGE I HAVE,

  * THIS COMPUTER SEEMS TO HAVE A NON STANDARD OR INVALID MASTER BOOT RECORD *.

  FIXMBR may damage your partition tables if you continue (of course I did). This could cause all of your scores on the current hard disk to become inaccessible.

  If you have problems to access your drive, DO NOT CONTINUE (of course I did)

  Are you sure you want to write a new MBR?       (of course I checked yes)

  Then... If I'm screwed?   I have to buy a new hard drive?   I can solve this problem?  Can I use the old as a ghost player to get my files?

  HELP ME OB 1... YOUR MY ONLY HOPE THOMAS

  Hi Thomas,

  ·         Are able to connect in normal mode?

  ·         What happens when you try to connect in safe mode?

  ·         You get the error message?

  I suggest you to run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• At the start of the laptop goes to a black screen and says invalid partition.

  Original title: can I PRO 1-2cpu (IBM Laptop) Xp.

  • Not long I Formated my Windows XP PRO 1-2cpu, thinking that he would have run faster, not a blue screen crash and eliminate any viruses that could in fact, now that its formatted I can't use, whenever I start the laptop it goes to a black screen and says invalid partition, I don't know what that means though.

    so my question is there a way I can restore the computer back to normal? However, I don't have a recovery disk.

  A lot depends on how reformat you your hard drive.  Most manufacturers have a recovery partition on the hard drive that can be used to reinstall the operating system. Access you this by pressing a button that appears briefly at the beginning of the boot process.  If you have reformatted the drive c: partition only you might be OK and can get by using this recovery partition.  Otherwise, if you reformatted all the hard drive, then your only alternative is to get a Windows installation CD, boot from this CD and reinstall Windows.   Contact your computer manufacturer for advice.

  HTH,
  JW

• IKM Partition Oracle Exchange Error loading - ORA-14006: invalid partition name

  Hello

  I use ODI Standalone Edition Version 11.1.1

  I've created an interface, the target table's partition.

  DDL script

  CREATE TABLE big_table2)

  ID NUMBER (10),

  CREATED_DATE DATE,

  lookup_id NUMBER (10),

  given VARCHAR2 (50)

  )

  PARTITION OF RANGE (created_date)

  (PARTITION big_table_2007 VALUES LESS THAN (MAXVALUE));

  the performance of the interface error: -.

  Internal

  CZ_SC_CONSULTING

  jar:file:/D:/Oracle/middleware/Oracle_ODI1/oracledi/client/jdev/extensions/Oracle.ODI.Navigator.jar!/com/Sunopsis/graphical/gif/State/f_error.gif

  2015-01-28 10:58:38.0

  2015-01-28 10:59:08.0

  30

  14006

  ODI-1226: step INT_EXCH_PART fails after 1 attempt.

  ODI-1240: Flow INT_EXCH_PART fails during an operation of integration. This flow of charge table BIG_TABLE2 target.

  ODI-1228: failed INT_EXCH_PART (integration) task on the target of ORACLE ODI_STAGE connection.

  Caused by: java.sql.SQLException: ORA-14006: invalid partition name

  ORA-06512: at line 2

  	at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
  	at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
  	at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
  	at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
  	at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
  	at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
  	at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
  	at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
  	at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
  	at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
  	at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954)
  	at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539)
  	at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
  	at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
  	at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
  	at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  	at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
  	at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
  	at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
  	at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
  	at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
  	to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)
  	at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
  	at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
  	to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)
  	to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)
  	at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
  	to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
  	at java.lang.Thread.run(Thread.java:662)
  	1000000	0	0	0	0

  Please can I know what is the problem.

  Put your name of the partition in upper case and double coate as:

  'BIG_TABLE_2007 '.

  The capital should not be a problem, but it is better to be like that because it will store like this in the table USER or ALL_TAB_PARTITIONS.

  This makes it easier to compare if you need to check if a partition already exists or not.

  Hope this can help you.

• Adding Partition for a partitioned Table

  Hello
  I have a partitioned table with 7 existing Partitions that follow this structure:
  
  PARTITION 'TRANSACTIONS_JAN2012' VALUES (TO_DATE () LOWER
  "2012-02-01 00:00:00 ', ' SYYYY-MM-JJ HH24:MI:SS»(, ' NLS_CALENDAR = GRÉGORIEN ')"
  ) PCTFREE, PCTUSED 10 0 INITRANS 1 MAXTRANS 255 NOLOGGING (INITIAL STORAGE
  1073741824 THEN 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0
  FREELISTS 1 FREELIST GROUPS 1 USER_TABLES DEFAULT FLASH_CACHE
  DEFAULT CELL_FLASH_CACHE) TABLESPACE "FTSV1" NOCOMPRESS
  
  I am trying to add a new Partition:
  ALTER table movements Add partition
  (partition TRANSACTIONS_JTS VALUES LESS THAN (TO_DATE (' 2012-03-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN ')));
  
  But get this error:
  SQL error: ORA-00902: invalid data type
  00902 00000 - "invalid data type".
  
  Any help is greatly appreciated.
  
  Thanks in advance,
  Johnny

  Hi Johnny,.

  Looks like you have one to several "Partition", delete this as well as the unnecessary parentheses.

  ALTER TABLE transactions
      ADD PARTITION transactions_jts
      VALUES LESS THAN
          (TO_DATE(' 2012-03-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'));
  

  Concerning
  Peter

• Desperately need help - "the partition table on device sda was unreadable." Erase all data?

  I'm forced to install CentOs on my Macbook using a machine virtual (VMWare, which is what I downloaded my teacher recommended). It's for my first class of operating systems, so bare with me because I don't know anything about operating systems (except about how to use Windows and my Macbook). I am also a daughter, what makes my same technical knowledge that much more rare. However, I am eager to learn...

  In any case, I downloaded them both. When I launch Fusion, I choose the file> New> install Windows or another OS on a virtual machine> continue without disk> click on the button that says 'Operating system installation disc using image file'> then I select the appropriate iso CentOS (CentOS - 5.4 - i386-bin-1of6) file> continue> drop down lists, I choose LINUX as operating system and Red Hat Enterprise Linux 5 as my Version> continue-> finish (no customization settings). It appears the screen of CentOS and I am invited by a text asking me if I want to install in text or graphics mode. (Don't know what to do here, but I select the graph). A bunch of white text scroll a screen of black background, then a blue screen shows up saying: 'Welcome to CentOS' at the top and a gray screen that says "to start testing CD media before installation OK press. Choose Ignore to ignore the media test and launch the installation. "I click on the red button (even once, if it is incorrect, let me know). A few rows of white text on black background (from anaconda... something on a video card...) then a nice graphic display of CentOS which I click NEXT. I then select English as my tongue (twice) and I gives me the message:

  "The partition table on device sda (VMware, VMware Virtual S 20473 MB) was unreadable. To create new partitions, it must be initialized, cauing the loss of all DATA on this drive. This operation will replace all choice on what players to ignore previous installation. You would like to initialize this drive, erasing all THE DATA? »

  I have no idea what to do here. I googled the message and others have been too, but they can talk about some hard file (and I have no idea what it is, and I can't seem to find mine).

  I can't lose what's on my hard drive (my school, music, photos, applications, files etc.). Clicking YES will erase my HD? I'm terribly afraid. I need to get this thing installed so I can do my operating systems class work, but I don't know if I did the installation correctly so far and especially, what to click at this point. Can someone help me out please (I spent 4 hours on this one today. "I have no one else to ask)? Finally, the installation is almost done after this step?

  Any help at all would be so greatly appreciated.

  I do not use Fusion, but I have VMware Workstation on Windows. I went through the same process that you went through. The answer to your question is that when you choose the operating system you install and you choose the option for the installation disc, it creates a virtual hard drive for you, size 20 GB. When they ask you to erase the hard drive, it's clear that virtual you create, not your actual computer hard drive. You can check by looking at the properties of the hard drive on your computer. It's probably 250 GB or 500 GB or something big like this. The CentOS WARNING speaks of a 20 GB hard drive, which is the size of the disk that VMware Fusion (and Workstation) create for CentOS.

• How to encrypt a USB, when I get the message "(GPT) GUID Partition Table partitioning scheme is required? '."

  I just tried to encrypt a USB drive with my Mac book (latest version) and got the message "A GUID Partition Table (GPT) partitioning schΘma required." What does this mean and suggestions on how to proceed?

  The drive must be formatted for Mac. Start in the Recvery mode. Erase the drive using disk utility (select the top icon which represents the entire disk and click clear. Partition scheme must be Mac OS (Extended) first partition GUID, which is the default value.

  If you want to install a system on it follow these steps:

  How to reinstall OS X on your Mac - Apple Support