'redirect' a browser to a different IP address.

Similar Questions

• HP Officejet 6500 has more by using a different IP address than before

  I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is the message that I get when I send a document to print wireless: network host 192.168.1.101 is busy try again in 10 seconds.

  I checked the IP address of the printer and it is 192.168.1.100 (not 101). Therefore, they do not speak with each other. I treated all the solutions that I can find on the HP network to see if I can get the two survey periods to match and nothing seems to work. I turned off, turn off router, off modem, printer is off, turned off computer and lit them all back. No help.

  Any suggestions? Can I print using USB, but it's embarrassing.

  Something doesn't look good - maybe that I misunderstood... You say above, your computer and your printer had the same IPaddress and, when this is the case, you were able to print. Now, the printer and the computer have different IP addresses and now, you are not able to print. If this summary is correct, that then it seems to me that it should be exactly the reverse.

  If the IP addresses were the same, there is a conflict between devices, a bit like a mailman trying to deliver mail to two different locations which have the same addresses... What place receives the mail? It is normal for all network devices have their own unique IP address - how each device gets its own mail... or data packets.

  From the sounds of things, your printer is 100 but the MAC OS think its 101. Therefore, the print job is sent to 101 and never happens at the printer. You have two options... tell the OS that the printer is located at 192.168.1.100 or that, to avoid this problem in the future, on the IP address of the printer a static address, just guessing anything below 100, as 192.168.1.50 and then specify the operating system that the printer is located to 192.168.1.50.

  To make the choice of the latter, you must use your internet browser (Safari) and navigate to the 192.168.1.100 address. There is a web interface for your printer. Look for the network settings, then you can change the way that the IP address is obtained from dynamic (DHCP) static. And, after that, you need to find the IP of 192.168.1.50. It is also important to complete the subnet mask that will be 255.255.255.0. Finally, if your printer includes "web applications", you should also check the DNS addresses. You can use: 8.8.8.8 and 8.8.4.4 (Google's DNS servers) or 208.67.222.222 and 208.67.220.220 (OpenDNS servers)

  Note that when you save / apply the changes, you will lose your connection to the webinterface of the printer as the printer will have a new address. To return to the printer web interface, access the new static IP address.

  As far as to say where actually the MAC OS printer, the simplest option, as appropriate, is to use the HP tool to add a network printer or a device. To do this, AFTER you change the IP address. The HP software will scan the network printer and it should give you a result that shows the printer to the new static IP address. Installing and if possible, the name of the printer with a few references of "static HP or the"HPat192.168.1.50"set as default printer and remove the old definition of HP printer.

  The other option to speak the printer MAC must use Add a printer via system preferences > printer/Fax. I'm fairly certain that the MAC tools can analyze the LAN... in any case, it will be a more complicated procedure. Better for a user MAC more warned give assistance if you go this route.

  Hope this helps

• text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.

  Text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.  This has happened recently.  My two girls have used their respective ipods and texting, without their messages of duplication for each of the other ipods for more than a year.  Somehow recently, both addresses seem to be synced with them or something, so that both see each and other messages.  I've recently updated two ipods, iTunes on my computer--not the cloud and added music for two ipods, but has not changed anything by email email settings or message I know.  Help, please!

  Welcome to the Apple community.

  I can't fully follow how you have everything set up, but a glance at the settings > messages > send & receive

• Route of the different IP addresses

  I have multiple IP addresses for a virtual server that is running Windows Server R2 2012 and I was wondering if anyone knew any software or all methods to deliver on a different IP address every time that I want. Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I have one "malware redirect" it redirects the browser to it's own pages! He also installed a shortcut on my desktop. It is said that he is, Malwarebytes' Anti-Malware

  I have one "malware redirect" it redirects the browser to it's own pages! He also installed a shortcut on my desktop. It is said that he is, Malwarebytes' Anti-Malware

  I have not installed the anti-malware program. Everyone knows this malware redirect before and is what anyone has ideas or suggestions on how to get rid of it?

  If I click on the shortcut of Anti-Malware, it asks me if I want to scan my computer for malware!

  Not be sure that it is, I don't want to scan my computer.

  Thanks in advance for your comments and assistance,

  Don

  Hello
  1. who is the operating system on your computer?
  2. what browser do you use to surf the internet?
  3. don't you make changes before the show?
  4. Since when are you facing this problem?

  Malwarebytes' Anti - Malware (MBAM) is a computer application that detects and removes malware
  MBAM is destined to find malicious software lacking generally other antivirus programs and spyware,
  including fake security software, adware and spyware

  You can use Event Viewer to check if the malware bytes has been installed. The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.
   
  To open the Event Viewer follow the steps below:
   
  Open event viewer by clicking the Start button, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click Event Viewer. (If you are prompted for an administrator password or a confirmation, type the password or provide confirmation).
   
  Access the link below to learn more about how to access the event viewer.
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Method 1:
  Try to run the Microsoft Safety Scanner to ensure that the system is free from any infection and check if it helps.
  Please follow the link:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Method 2:
  You can check out the following link and check if it helps:
  How to restore a hijacked web browser
  http://www.Microsoft.com/security/spyware/browserhijacking.aspx
  See also:
  http://www.Microsoft.com/protect/terms/hijacking.aspx

• Microsoft Outlook is not compatible with my email. How can I change this to a different email address. It opens and gives me the email that it is not compatible.

  Microsoft Outlook is not compatible with my email.  How can I change this to a different email address.  It opens and gives me the email that it is not compatible.

  I need to put up with my hotmail account.

  Hi CarolBehrendt,

  • What e-mail program other than Microsoft outlook use?

  You must validate your application in the Windows Live community to know how to configure the hotmail account in the e-mail program you want to use.

  http://www.windowslivehelp.com/

• Problem with website security cerificates. Said the security certificate presented by this website was issued for a different website address.

  Problem began the week last with Verizon's Yahoo email. I can't access it. I get the message on the certificate.  Said the security certificate presented by this website was issued for a different website address.  can hnts in and out of yahoo, but can not get by e-mail. I have Windows vista 32-bit home. Have tried several things offered by yahoo... Delete history, cookies, defragment the drive hard, etc. Then they said need to ask Verizon. Community sitting there, no response. I had a help line, but what they had me try did not work. Could not do the download help remotely, I tried Java plugin download, has got an error 12031, and a Microsoft fix it but none of it worked. Could not load. Then they said it was having problems with Microsoft windows problems. Error files, corrupted files and certificate & register...  I did a few other things too but do not know if someone can help me... Not even if I am in the right place.  I really hope that someone can help you.

  Hi Patsabo,

  I suggest you to check if you are facing the same question in the new administrator account.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Use of two different MAC addresses EX60

  Hello outthere.

  I use an EX60 for testing. Everything works fine, but my colleagues told me that endpoint uses two different MAC addresses. These addresses are seen on the switch will remain the ex60 ist connected.

  The situation has not changed after doing a factory default.

  It's a kind of Mystic, because my ex90 do not use two MAC addresses.

  So the question is, what is the diffrence between ex60 and ex90? Is this a normal behavior on ex60?

  I hope someone can help me!

  Greetings from the Austria

  Martin

  Hello

  Using a touchscreen on the EX60? I think that the 2nd MAC address will probably be that of the touchscreen attached. How to check? The MAC address of the EX60 can be verified using the API. SSH into the EX60 and run:

  XStatus network //Mac

  * s network 1 Ethernet MacAddress: "00:50:60:05:52:BA."

  * end

  Ok

  The MAC address of the button can be controlled via access root for the codec.

  SystemTools rootsettings on

  [dderidde-ex90-desktop: ~] $ arp - a

  ARM3. LocalNet (169.254.0.13) to 00:e0:0 c: 00:8 c: 43 [ether] on eth1

  arm0. LocalNet (169.254.0.10) to 00:e0:0 c: 00:8 c: 40 [ether] on eth1

  ARM2. LocalNet (169.254.0.12) to 00:e0:0 c: 00:8 c: 42 [ether] on eth1

  HSRP-10-48-2 - 1.cisco.com (10.48.2.1) at 00:00: 0C: 07:ac: 00 [ether] on eth0

  ARM1. LocalNet (169.254.0.11) to 00:e0:0 c: 00:8 c: 41 [ether] on eth1

  Arm4.LocalNet (169.254.0.14) to 00:e0:0 c: 00:8 c: 44 [ether] on eth1

  [dderidde-ex90-desktop: ~] $

  My contact is not directly connected, so can't see here, only the gateway address MAC address. But you should see the touch directly connected.

  Otherwise, there is a sticker on the back of touch with serial number, and I think, MAC also.

  We have a DDT open for this behavior.

  CSCtz86298 - 802. 1 x is not handled properly on device with PC port and / or Touch

  Greetings from Belgium.

  Danny.

• I downloaded and installed creative cloud with an email address, and when I open it, it says that I need to check an old different email address that no longer exists. What should I do

  I downloaded and installed creative cloud with an email address, and when I open it, it says that I need to check an old different email address that no longer exists. What should I do

  Follow the procedure below:

  
  

  N ° 1)
  

  Launch the Task Manager and end all Adobe related tasks such as Creative cloud, CoreSync, AAMUpdater... etc.

  
  

  Step 2)

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  It will open the Appdata folder.

  Then navigate to local > Adobe > OOBE. Open the OOBE folder and delete the file " Opm.db".

  Once you had deleted the Opm.db file, run Adobe Creative Cloud application and check.

• How can synchronize 2 direct vms with different ip address

  Hello

  I have a question I have 2 virtual machines, their data are exactly even now I want to know is there any wany to synchronize their data?

  I don't want to use VR because vr can't the VMS syn 2 which turn on it just can make a sgadow of the one on the host of othe

  now I want to have 2 virtual machines with different ip address, and in time, they can synchronize data

  Best regards

  Babak

  There are no methods that can be used that will do what you are trying the hypervisor layer.  It will be done in the comments.  I would recommend for your machines two windows RoboCopy, and for your two Linux guests recommend Rsync.,.

  There is not much more that we can really say here, that you excluded the VMware replication as your need to have different IP addresses in the two guests.

• Help! I used a different email address for my subscription of CC as my Adobe email address!

  Inadvertently, I used a different email address when I paid for my subscription of clouds that I use to connect to the Adobe forums. The result is that the programs that I have installed are 30 days in trial mode. Could someone explain a work around for this?

  I saw that someone referenced this page as a possible solution in this forum, but I don't see how this assistance: https://helpx.adobe.com/creative-cloud/kb/asks-serial-number-error.html

  Once you disconnect, change the email ID and then reconnect.

• ESXi 4 hosts and virtual machines with domains and different IP addresses

  Hello, I hope someone can shed some light on this problem.

  I have an ESXi host.  It is in the 'AREA A' and has an IP address like 204.75.225.6.

  Is it possible to use the tool VMware P2V Converter some servers that are located in one field other than ESXi host and have different IP addresses?

  Example: VM candidate: in "AREA B" with IP address 192.168.1.56.

  Both domains trust each other.

  Y at - it a tip to configure the network settings on the host to allow that?

  I currently have 2 vSwitches.  One for the management network and the other is for the traffic of the virtual machine.

  Firewall?

• Redirect the user to the different menu item

  Hi guys,.
  
  JHeadstart 11.1.1.3.35
  
  I use the JhsTree menu structure. One of my menu items is a wizard that goes directly to the insert mode, so at the end of the wizard, I redirect the user to a different group (menu item). The problem is that while the new menu page is displayed to the user, the previous menu item (Assistant menu) is still selected, so that if you try and you reenter the Wizard menu item, nothing happens as the structure of the menu and the page are out of sync (and the menu believes that you are already on the page of the wizard even if you're not)
  
  My question is, also the creation of a navigation to a different menu item rule, how can I programmatically change the selected menu item?
  
  See you soon,.
  Brent

  Brent,

  No, you can remove these goods safely.

  Steven Davelaar,
  JHeadstart team.

• How to get different email addresses all in the same folder

  I keep asking, but he answered before and my Inbox (I guess as local folders) used to accept emails from my two different accounts. Now, they come in two different boxes which is annoying. How do I get emails from my two email addresses to arrive in the same Inbox, have the same sent box, etc.. ?

  I assume you mean the e-mail pop accounts
  Only POP email accounts can use a global Inbox.

  Quit Thunderbird to access the server mode "offline."
  Click the blue screen two located lower left status bar.
  It will be two black screen offline icon.

  All files out of all email pop email accounts and put them in folders in the "local folders".
  Delete the emails you want.
  Empty Junk and deleted mail folders (for example: right click on the junk mail folder - chute)
  Right-click on each folder and select 'Compact' or ' file > Compact folders

  When pop email account files are completely empty and compact
  "Tools" > "Account settings" > "Server settings" for the pop email account
  Click on the button "Advanced".
  Select: "Inbox for the account of different" and "global Inbox (local folders).
  Click on 'OK '.

  Now, you must check all of the following points to ensure they point to the correct location. Choose so 'Copies and files '.
  "Tools" > "Account settings" > "Copies & folders" for pop e-mail account
  Look at the records of destination for 'Envoy', 'Projects' and 'Templates '.
  Make sure that the messages of each will be stored in your "Local folders" folder locations

  then check Junk - click on "Parameters of Junk" check that the folder selected for junk e-mail messages is the one you want to use in the "local folders".

  Do the same for other POP email accounts

  Click OK to save the changes to account settings.

  Do not go back online - you don't need to download anything.
  Restart Thunderbird immediately.

  When it restarts, it should restart in mode online or maybe ask you.
  If you restart offline, it is not important, just trade back after reboot:
  Click on the screen icon black two located lower left status bar.
  It will be two icon blue screen when it is online.

  This should remove the e-mail account in the left pane of the folder and redirect the mail on behalf of local folders.

  • http://KB.mozillazine.org/Global_Inbox

• Firefox redirects a Web site to a wrong address.

  When I try to open site extratorrent.cc , it just connects to facebook.com for no reason. I tried to connect to the correct address in 3 different ways:
  1. from bookmark
  2. by typing the address
  3. from search engines

  But no matter what, it redirects me to facebook or say connects directly to facebook.com
  It happened with another website, but I changed my address in the bookmark and it solved. But it does not solve. My cache has been cleared. I was looking again to clear the cache and check. IE and Chrome work correctly.

  EDIT: Problem solved. Reset firefox and it solved the problem.

  Reset firefox from the troubleshooting information and clear all hide and cookies. This solves the problem.