Redirect Web Login Page

Similar Questions

• WiFi hotspot redirection to login pages does not

  Hello
  I use Win7 64 bit home on a new laptop. Wireless works fine on the laptop to my home router, hidden SSID and WPA2 etc.

  When in use and about various points of access, I can connect to the network provider without problem - I get the IP address, DNS and gateway via DHCP by default correctly. However, hotspots use page hijacking to redirect the user to a login page to access the internet. This doesn't seem to work, and ive tried everything but another browser. Thus, the icon shows limited access (no internet) for the connection.

  The hotspots are correctly redirected to the login page with an iPhone and a friends XP laptop. I can't find that many mentions of the problem, so maybe it's just my question, but is a facility enough vanilla on the machine, and I tried with AV and FW disabled as a test. I see also THE whole relevant advanced options that seem to block the redirect.

  Someone else has encountered this and know a fix?

  See you soon

  Hello

  Try these

  (I) reset the TCP/IP stack.
  Go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357Disable the IP assistance service:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  (II) disable IPv6:
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters. NOTE: You should do this for each network connection.

  Hope the info. is useful

• redirect to login page

  Hello
  
  I have the following procedure to redirect the user to a page 50, when the password is about to expire.
  The problem is that instead of going to the 50 page go to page 1
  
  Thank you
  
  Tony R.
  
  declare
  date of v_pwd_expire;
  
  Start
  Select pwd_expiration
  in v_pwd_expire
  of cms_modsecurity
  where trim (upper (username)) = trim (upper (:P101_USERNAME));
  
  If (v_pwd_expire - sysdate) between 1 and 5 can
  HTP.init;
  owa_util. REDIRECT_URL ('f? p ='| wwv_flow.g_flow_id |': 50');
  htmldb_application.g_unrecoverable_error: = true;
  end if;
  
  end;

  Could Tony - you please change your OTN handle to something easy to read? Thank you.

  It seems that your application specifies the built-in authentication scheme login page. Can you null this field and select 101 from the LOV (assuming that you have a login page 101)?

  Scott

• Generation of url of the NAC 4.7 CASE web login page

  We had third party generated for the ca certs and the CAM and they installed OK, as well as the relevant root and intermediate certificates, and the CASE/CAM communicate very well.

  However when a user is redirected to the authentication page, the generated url using the CN of the certificate...

  https://al-nac.sitename.local.companyname.co.uk/auth/perfigo...etc.

  However, the machine is unable to resolve the url.

  We cannot add entries dns for this url, we administer only in the field of sitename.local.

  Is there a way for certification authorities to ask the user to access a URL via an IP address?

  If I asked a new certificate, but use the IP address instead of the name of the machine, the auhentiation page will be referenced by this?

  Concerning

  Tony

  Hi Tony,.

  Is this only for internal users?  If so, you can be better with something as a cert generated internally (as of Microsoft certification authority) rather than an external one.  I don't think they'll do certs of based on IP addresses, either.

  Thank you

  Lauren

• Redirection after Login page:

  After connection, the apex goes in 1st page instead of the home page. I had the homepage at page 100.
  
  Please suggest the solution.
  
  Yogesh

  Hello

  Is there anything in the custom authentication code that performs a redirection to page 1?

  Andy

• WebCenter content to display 404 instead of redirecting to the login page

  Hello

  I exposed my Contribution files using Web URL mapped folders. However, if I get an invalid sign in URL, it redirects me to a login page. How can I prevent content server to do?

  I would like to redirect to 404 instead of this page.

  https://blogs.Oracle.com/Kyle/entry/web_url_mapped_folders_exposed

  How do you disable the URL?

  If you have a URL like http://server/idc/idcplg?IdcService=GET_FILE&dID=67&dDocName=WC-000030 , mentioned in the article, and you disable the Server side, you will get an error (or another existing page); If you disable the other party, the server must parse the string first (therefore, the application authentication) and only then can give you an answer based on the problem-> example http://server/idc/idcplg?IdcService=GET_FILE&dID=6789 can lead to an "Item not found" error or "you are not allow to view this object ', http://server/idc/idcplg?IdcService=GET_FILE_XYZ&dID=67 "Service not found"etc..

  Overall, the 404 error does not provide useful information, and typing in (deliberately!) a bad URL is meaningless.

• Successful login ADF redirects to the login page

  JDeveloper 11.1.1.6

  Simple login page, simple first page.

  If the connection is successful, then it just goes back to the login page, rather than on the first page.

  I have "redirect after successful authentication" selected and pointing to my first page.

  If incorrect credentials are entered, then it goes to the error page as it is supposed to.

  No idea why this is happening?

  Login.HTML is the welcome file in the xml web, so when I run the app on my weblogic server built-in, this is the first page I see.

  No, it will not work like that.

  Home page is the page server that uses when there is no http request to a specific page within the web application context (for example, when you enter just: http://hostname/ReportServer: port/YourContext).

  In your case, if your authentication was successful, you will be redirected back to the login.html page (because it's your home page)

  Instead, add faces/firstPage.jspx in your login page (I don't know if you need to end .jspx)

  or

  Run your firstPage.jspx

  If you are not already authenticated, the server will redirect you to the login page, and after successful authentication redirection, you return to the page defined in the ADF (firstPage.jspx) Security Assistant

  (and note that, by default, ADF Security only protect pages that have pageDef)

  Dario

• Facebook tries to redirect my usual login page with a dialog "you must be logged in. This allows Mozilla to 'run as administrator' stopped, why?

  By connecting to facebook lately (in the usual help of the login page for the Canada facebook or facebook.com), opens the usual page, but then a dialog box appears stating "you must be logged" which also provides form for email and password boxes. It seems that my login pages are redirected as I'm stuck using the original page to connect. When I chose "run as Administrator" for firefox, has not stopped this dialog box that appears and I am able to use the initial login page. I wonder what might have been past & if/why run firefox in admin mode has stopped this?

  This can be caused by corrupted cookies.

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-requrie-passwords

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  If clearing cookies doesn't help, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
  
  Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other files to present as cookie cookies.sqlite - journal in the profile folder of Firefox in the case where the cookies.sqlite file has been corrupted.

  • http://KB.mozillazine.org/cookies
  • https://support.Mozilla.org/KB/clear-cache-history-and-personal-information

• How can I activate Firefox prevented this page from automatically redirecting to another page? This unfortunate thing has now completely blocked me connect to a Web site.

  How can I disable this message blocking? "firefox prevented this page automatically redirecting to another page.
  It used to be boring, but now he has completely blocked me to connect to a Web site.

  Tools > options > advanced > general...
  then uncheck the...
  I myself have this option because I stand bad pages themselves help to redirect to who knows what. Why can't you just go sites where I click?

• SRA 4600 Web Application Firewall blocks access to the Portal login page.

  We have a 8.0.0.1 - 16 4600 running and run the Web Application Firewall.  We had a few reports of users home that our portal page was not available, only tried IE, but everything went well here.  Today we had an internal machine with the same question and noticed that it was blocking WAF access: "threat of avoided WAF: Injection SQL 1 attack" you can see nothing wrong with this machine that may be cause the WAF to block the Portal login page.  Here are the event log:

  "Jun 10 09:34 sslvpn1 SSLVPN: id = sslvpn sn = C0EAE4745184 time =" 2015-06-10 09:34 ' vp_time = '2015-06-10 14:34 UTC' pri fw = xx.xx.xx.xx = 2 m = 34 c = 402 src = dst = xx.xx.xx.xx xx.xx.xx.xx user = 'Unknown' usr = 'Unknown' msg = "prevented WAF threat: SQL Injection attack 1 ' URI=remote.ncmic.com:443/ rule-match =" _ga = ga1.2.1366358136.1433946841; " _dc_gtm_ua-21325736-1 = 1 "AttackCat = 'SQL Injection attack 1' somm ="SQL Injection is a technique of attack used to exploit websites that construct SQL statements from user-supplied input,"hamid = category '9005' = 'command execution - SQL Injection' agent =" Mozilla/4.0 (compatible; " MSIE 7.0; Windows NT 6.1; Trident/7.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; Tablet PC 2.0)' geoCountryID = '0' geoCountryName = 'LAN' geoRegionName = 'unknown' geoCityName = 'unknown '.

  Other machines can access the page without problem... thoughts?

  Can not reproduce this problem at the moment...

• Create a PDF from a Web Site secure only gets the Login Page

  I am trying to capture a part of a web site secure PDF, but when I start the conversion only gets to login page THAT PDF would be. I have full access.  I see other web site secure questions here, but not this one.

  Hello

  This is because Acrobat doesn't have a login. If you need to create a specific secure web page PDF file, you can open it in the browser and then convert via Acrobat plug-in software component.

  It is not possible to convert from Acrobat itself secure sites.

  Thank you

  Tanvi

• Is it possible to customize the login page customer web email?

  Is it possible to customize the login page customer web email? It would be wonderful to be able to offer my clients a personalized and wonderful connection Web page.

  Thans in advance!

  Diego

  Hi, no you can't.

  This is a 3rd third party vendor offering.

• Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?

  Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?

  clear your adobe.com cookies or use a different browser.

• How can I redirect to the login page when the client disconnects?

  I use {module_logout}, how do I redirect to the login page when a client disconnects?

  Thank you for posting.

  You can redirect the user to the login page using a small java script code. Please visit the following link http://kb.worldsecuresystems.com/598/bc_598.html#main_Redirecting_to_another_page

  See you soon,.

  Scott Raj Rouanet

• redirect web-auth comments

  Hi guys,.

  I'm having some problems with getting the web-auth redirection to work properly.

  Basically, I set up an SSID with authentication of layer 3 and the customer's IP via DHCP, the DHCP server is configured on a win 2008 Server (192.168.10.18).

  After the client connects to the network wirelessly with web authentication, it got a valid IP address, can I open a web browser and access www.google.com, then it does not redirect me to the authentication web page requesting my credentials.

  I did an "ipconfig/all" on the client and found that I have the correct gateway and the DNS server IP address is 192.168.10.18, on the DNS server, I also have an entry called 'wlc2112' that is pointing to the IP of an another 2112 WLC with 1.1.1.1. If I type "http:wlc2112" in the browser, then I can get redirected to the correct web auth page with https://wlc2125.wirelessdomain.local/login.html?redirect=wlc2112 in the url and ask for credentials. the wlc2125 is another entry that I configured in the DNS as well, it is also the WLC I configured the SSID for web authentication.

  If I type the IP address of the WLC in the url I also redirected to the web page of auth.

  It seems to me that if we type something which cannot be resolved by the DNS (192.168.10.18) server, then the redirect page falls down, so I just want to ask if it is a behavior expected or there is something I have to do with the configuration? I think I missed something here, as in the example of config on the Cisco Web site, he used google.com as an example and GraphiqueP correctly.

  any comments would be much appreciated, thanks in advance for your time and your help.

  Andy,

  This is the expected behavior.  If the URL cannot be resolved, the WLC won't start screen.  The DNS query is mandated by the WLC, and if it does not get a valid line, you see what you see.

  See you soon,.
  Steve

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.