Redirection of files that previously were routed on Vista Home Premium

Similar Questions

• need an iso file to install windows for windows vista Home premium 32-bit

  I have a product key, but need Windows vista Home Premium (32 bit) ISO because I lost the part recovery partition

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• System memory that is reported by Windows Vista Home Premium is less than 4 GB

  Original Upgrad title: RAM for PC Toshiba laptop

  I have Vista Home Premium on a laptop Toshiba which is suppose to manage up to 4 GB of RAM.  I upgraded from 3 to 4 GB, but the computer will recognize the/3 GB.  Toshiba has update me my processor and Bios and there was no change and then they said that Vista Home will only recognize 3 GB.  However, my HP with Vista Home desktop computer recognizes 6 GB of RAM.  How can I recognize the 4 GB of RAM in the computer?

  Please see: the 3 GB-No-4 GB RAM problem Carey Frisch

• How to open a port that is closed? Have Vista Home premium 64-bit

  I get this message when you try to get to oracle - OEM
  "Ip_address here" is not set up to establish a connection on port "5500" with this computer. The ip address is the address of the local host - all on a single pc.

  It was woprking then I changed my security/antivirus software and the port is closed.  I uninstalled the new software and the port is always closed.

  Hi Ames66,

  It happens more often because the firewall blocks the program and to allow that program to communicate through the firewall, you can usually do that by selecting the program on the Exceptions tab in Windows Firewall.

  If you have Windows Firewall on your computer, follow the steps in this link:

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-a-port-in-Windows-Firewall

  If you use a third party firewall manually give exception to the program.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• update my Photoshop cc through my creative cloud and now takes more time to open the psb files that yesterday were beautiful, moving same layers autour, I now get the beachball! any suggestions?

  update my Photoshop cc through my creative cloud and now takes more time to open the psb files that yesterday were beautiful, moving same layers autour, I now get the beachball! any suggestions?

  Perhaps a preferences Reset could fix.  Cmd k will lead you to the Photoshop preferences where you will see this screen.

  

• Requested help recovering from the change that I did for the 'Public' of Vista Home Premium file permissions for everyone

  I made a blunder when changing the permissions of public folders for everyone.  I am now connected to Vista Home Premium on my home PC as an Admin will be complete permissiongs.  When I right click on the folder Public, pooling and property options are both now gone.  How to restore the availability of these options?  Also, I can access to is no longer the files that I previously copied into the Public folder.  How can I restore my access to these files?

  Have you started with elevated privileges command prompt? Just running in the administrator account is not enough. Looks like you don't have because it starts in your user directory. If you were high would begin in the Windows\System32 directory.

  See: http://windows.microsoft.com/en-US/windows-vista/Command-Prompt-frequently-asked-questions

  Orders, you should get something like this:

  Takeown /f /a C:\Users\Public
  ICACLS C:\Users\Public/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public/Grant "Administrators: (F)".
  Takeown /f C:\Users\Public\*/a
  ICACLS C:\Users\Public\*.*/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public\*.*/Grant "Administrators: (F)".

  I can't guarantee that this will fix your system. You must give permissions for the system and other users accounts.  If you have access to another system, I would compare the settings there. These programs will help you determine the permissions associated with a system

  • AccessChk http://technet.microsoft.com/en-us/sysinternals/bb664922
  • AccessEnum http://technet.microsoft.com/en-us/sysinternals/bb897332

• Vista Home Premium will not read/recognize/burn HD videos taken with my Canon camcorder HDD21/AVCHD (MTS format). Results in the message stating "Windows Media Player may not supported file type or the codec that the file compressed.

  I have a Vista Home Premium 64-bit, Service Pack 2 Dell.  He read/won't recognise no videos HD taken with my Canon camcorder HDD21/AVCHD (MTS format).  Each attempt generates a message stating "Windows Media Player may not support the file type or the codec that the file compressed.  I used a Windows 7 PC, which allowed me to play the video from the camcorder and burn a DVD of the video to share with the family.  I'd appreciate any help.  Thank you

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  For better support please try the Microsoft Vista for photos and video forum instead. http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

• I lost the hybrid sleep on my laptop Vista Home Premium. The controls reveal that it is because of VGA files and or legacy (that they) what should I do to recover the hybrid sleep please

  I lost the hybrid sleep on my laptop Vista Home Premium. The controls reveal that it is because of VGA files and or legacy (that they) what should I do to recover the hybrid sleep please

  Allow hybrid sleep is turned on? :

  How enable and activate standby hybrid under Vista
  http://www.mydigitallife.info/how-to-enable-and-turn-on-hybrid-sleep-in-Vista/

  Missing or not found allow advanced settings of hybrid sleep in Vista Power Options
  http://www.mydigitallife.info/missing-or-not-found-allow-hybrid-sleep-in-Vista-power-options-advanced-settings/

• File sharing between 'Vista Home Premium' on desktop PC and 'Windows 7 Starter' on laptop

  Hello

  I have a desktop under Vista Home Premium PC.

  I would use my laptop, Windows 7 Starter, to access the files/folders on my desktop running.

  The existing guidelines of Microsoft tells me to select one of the three options on the 'Remote' tab in the 'System properties' window, you get to via the settings 'distance' in the 'System' part of the 'system and safety' in the control panel.

  However, the "three options", to which it refers do not, appear on my phome PC or laptop.

  Exactly how you set this to the top!

  Thanks in advance for your help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack MVP-networking. EZLAN.NET

• error 0 x 80070246 when you try to install Vista Home Premium SP1. "Missing manifesto" and "Payload missing file" CheckSUR.log errors, running System Update Readiness too.

  I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.

  After you run the system update readiness tool, I found the following errors in my CheckSUR.log

  =======================================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-09 19:13

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
  (f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3e

  Summary:
  Seconds executed: 1221
  Found 2 errors
  CSI shows lack Total count: 1
  CSI Payload file lack Total count: 1

  Unavailable repair files:
  winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest

  =======================================================

  The newspaper CBS.log itself has several types of mistakes, too.  Here are some samples:

  -Errors 'M²;

  2009-10-09 21:10:27, info CBS SPI: from SPInstall
  2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper.  Continue without.  HR: 0 x 80070020
  2009-10-09 21:10:27, info CBS SPI: wave 0 detected
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: spent before due diligence
  2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
  2009-10-09 21:10:27, info CBS SPI: M² is not included in
  2009-10-09 21:10:27, error CBS could not initialize wrapper M²
  2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value

  -"Could not find the CixTarget Molok" errors.

  2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
  2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
  2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109

  -"ILLEGAL_CHARACTER" and more "Sqm" errors-

  2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
  [gle = 0 x 80070246]
  2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4

  
  2009-10-09 21:30:26, information CBS Exec: comprehensive treatment.  Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
  2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
  2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized.  Reboot required: no
  2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
  2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized.  Reboot required: no
  2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
  2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
  2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized.  Reboot required: no
  2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface.  HR 0 x 80070246
  2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
  2009-10-09 21:31:41, error CBS didn't M² value for parameters
  2009-10-09 21:31:41, error CBS failed to set exit code value M²
  2009-10-09 21:31:41, error CBS didn't M² for the SKU value
  2009-10-09 21:31:41, error CBS doesn't have the m value for the build number

  ------------------------------------------------

  I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.

  Any help that can be provided would be greatly appreciated.

   

  1 person needs an answer

  For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...

  After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up.  But overall these problems were minor compared to it, that I lived just to fix some missing files.

• Sharing files on home network - Vista Home Premium 32 and 64

  Hello people,

  I searched for hours, I made countless different steps to try to understand this point, and yet I'm still far away.
  I have two computers on my home network.
  -Machine 1 is Vista Home Premium 32-bit and is connected via a wired connection to my NetGear router.
  -Machine 2 is Vista Home Premium 64-bit and is connected via a Wireless connection to my NetGear router.
  I have a WD WorldBook connected to the Machine 1 via USB and I would like to be able to access it through my home network on Machine 2.
  Here are my settings that may be useful to know.
  Machine 1:
  -Cable
  -Network: NotURInterwebs (private network)
  -Working Group: DISCOVERY
  -The discovery of the network: WE
  -File sharing: WE
  -Public folder sharing: OFF
  -Printer sharing: OFF
  -Password protected sharing: WE
  -Media Sharing: OFF
  Machine 2:
  -Wireless
  -Network: NotURInterwebs (private network)
  -Working Group: DISCOVERY
  -The discovery of the network: WE

  -File sharing: WE

  -Public folder sharing: OFF

  -Printer sharing: OFF

  -Password protected sharing: WE

  -Media Sharing: OFF
  If I go into start-> network on the Machine 2 I see the other computer and the router, but when I click on the Machine 1 I get the following text:
  Windows cannot access \\Machine#
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035
  The network path was not found.
  However, when I go to start-> network on computer 1 and click on Machine 2, I have no problem connecting.
  Does anyone have an ideas that could help me understand what is happening?
  Thank you!

  Hello

  Thanks for the detailed information.

  We need additional information to help you with the problem, please answer the following.

  What antivirus application do you use?

  I suggest to change firewall security settings, or disable the security software on the system and try to access the location.

  Method 1:

  Disable the firewall on the Machine 1 and check the status of the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Note: In addition to a firewall, you must also be an antivirus and anti-malware program to help protect your computer. Install Microsoft Security Essentials or another antivirus and anti-malware program and update it. Many of these programs update automatically.

  Method 2:
  Error code 0 x 80070035 indicates that the network path was not found. This problem occurs if the NetBIOS over TCP IP is not enabled in Windows Vista. Please follow the steps below.

  (a) click on «Start», enter "NCPA. CPL"(without the quotes) and press ENTER.

  (b) right click on the connection you use for the local connection, and then click "Properties".

  (c) click on the button continue to check the permission of the administrator.

  (d) click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  (e) click on the button "Advanced" in the opened window. On the "WINS" tab, select 'Enable NetBIOS over TCP/IP' and then click 'OK' to save the setting.

  The following article presents NetBIOS over TCP/IP.

  NetBIOS over TCP/IP

  http://TechNet.Microsoft.com/en-us/library/bb727013.aspx

  I hope this helps.

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• Update my OS Vista Home Premium to Windows 7 restore my missing file of the Windows Installer Service (and perhaps my RPC end point mapper file)?

  Iolo System Mechanic deep cleaning has totally deleted my Windows Installer Service folder (and perhaps my RPC end point mapper file) on my Vista Home Premium PC. I looked into MSCONFIG and they are gone!  It has been too long to do a system restore or other functions of the round trip. Q: if I buy the Windows 7 upgrade, it also installs?  It will make Windows Installer service (and RPC end point Mapper) reappear?  If not, how to get support from Microsoft?  I already tried all 4 methods in article ID 2642495 re: find the Windows Installer service.  I have now 10 MS Important that cannot install updates because missing the file of the Windows Installer service.  Personal support of Iolo System Mechanic were NO help.  Thanks in advance.

  Hello

  What service pack is isntalled with Windows Vista?

  Method 1:

  Check out the link and follow the steps.

  Windows Installer 4.5 is available

  http://support.Microsoft.com/kb/942288

  Method 2:

  If you plan to buy win7 you can check the following items.

  Run Upgrade Advisor before upgrading Vista to Windows 7. Check out the link.
  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Method 3:
  Check out the link and follow the steps.
  Upgrade Windows Vista to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
  You can also check:
  Upgrade Windows Vista to Windows 7 (custom installation)
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

• Bluetooth - HP Touchsmart IQ772 Vista Home Premium SP1 software license file

  A couple of weeks, I installed Driver Max and update the outdated drivers, blutooth, among them, identified by Driver Max, on my HP Touchsmart IQ772, Vista Home Premium SP1.  Since last week, I get this message every time I have log on or restart my computer. File not found Bluetooth software license. [2]. what this means and how do I stop this happening again?

  Thank you.

  I had the same problem after a registry cleanup on my touchsmart iq518a, don't know why it worked, but I fixed it by clicking programs and features in the control panel and uninstall the program "HP bluetooth." Everything still works perfectly and that the annoying message is no longer happens.

  Hope this helps

  Carpet

  Message edited by Knobby_103 on 04/24/2009 15:03

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support