Reduce the traces of routing between vias

Similar Questions

• How to reduce the space between icons on the desktop?

  I want to reduce the space between icons

  Right-click on the desktop, select "Display", uncheck "auto arrange" and snap to grid "if they are checked, then move the icons in the desired position.
  I hope it works for you.

• How to reduce the spacing between the elements

  Hello

  I use APEX 5.0.3 and universal theme.

  How can I reduce the vertical spacing between the elements arranged one below the other on a form?

  Thank you

  Chandra.

  Chandra_S2000 wrote:

  I use the Standard region model

  Change the Point Padding property Template Option of advanced Padding Slim or Remove the Padding (not recommended).

• How to reduce the space between two lines in a panelformlayout who is lain in the panelbox?

  Mr President.

  I have a panelbox in which I put a panelformlayout which have two rows as below

  

  I want to reduce the space between inputfield first and second inputfield.

  Thus, this second inputfield closer to the first inputfield

  Respect of

  You can define simple = true in the first entry field (name), sorround who on the ground with panelLabelAndMessage and add the second inputField (address) about to end of panelLabelAndMessage.

  In fact, you can add more or less space with spacer between them and panelGroupLayout with horizontal layout as a facet of the end child

• How to reduce the space between the section number and title of section in TOC

  Hello

  I want to reduce the space between the section number and title of section in TOC.

  can someone guide me on how to do this:

  

  Thank you

  Try to do it from the style of paragraph (bullets and numbering) options

  

• Routing between vApps in the same ORG

  Am I right in understanding that the only way to route between vApps in the ORG even is manually by creating static routes?

  I have the static routing options under VAPP networks but not under ORG networks. The documentation says that there should be a static routing tab, but the single tab I have is DHCP. Y at - it a step that I missed somewhere?

  Thank you!!

  Ahh ok, if its isolated, you can't do that sort of thing.  Precisely, the docs say you can with a net org of this type?

• Routing between sites that use the site to site VPN

  I'm running 7.2 (1) two 515 who have a VPN site-to-site set up a bit as follows:

  subnets of the main site - router main site - PIX1___Public IP's___PIX2 - remote site

  The main site router: CAT6506 with engine SUP1A

  Subnets listed in motor SUP:

  SUB1 VLAN

  IP address 180.x.1.x.255.254.0

  VLAN SUB2

  IP address 180.x.2.x.255.254.0

  VLAN SUB3

  IP address 180.x.3.x.255.254.0

  VLAN SUB4

  IP address 180.x.4.x.255.255.240

  PIX1 is the subnet SUB4 (180.20.4.2)

  Remote site subnet: 192.168.1.0/24

  Route the engine by default Overtime toward another router that reached the internet via another public IP subnet.

  Any host on SUB4 can reach any host on the remote site as long as the SUB4 host default gateway is the inside int PIX1 (180.20.4.2).

  No matter what SUB4 host that uses the 180.20.4.1 address (router) default gateway cannot communicate with a remote host, but can communicate with any host from any subnet of the main site.

  All remote hosts can communicate with any host on SUB4, regardless of the gateway of the SUB4 host address.

  All remote hosts can communicate with the router on SUB4 main site, but can not reach one of the other interfaces subnet configured on the router.

  I've added a static route on the SUP engine:

  router IP 192.168.1.0 255.255.255.0 180.20.4.2

  That did not help.

  The uses of motor SUP EIGRP to learn other subnets main site reached through routers, so I added the remote subnet to that:

  Router eigrp 10

  redistribute static

  network 180.20.0.0

  network 192.168.1.0

  No Auto-resume

  No log-neighbor-changes to eigrp

  No chance, no more.

  I can't help thinking that I'm missing something very basic.

  Any help is really appreciated

  Hello

  PLS, find the changes that must be made and checked.

  PIX remotely:

  1. you only need a default route and that you can route your subnets via inside as they are outside, so remove these statements

  2.i see Access-group configured to be applied to the external interface for traffic coming from the outside, make sure that all required subnets are allowed.

  3. in the access list for the corresponding traffic to cryptomap, I see that one included subnet, pls have all included traffic that must be encrypted (as sub1, sub2..)

  Main PIX:

  1. in the access list for the corresponding traffic to cryptomap, I see that one included subnet, pls have all included traffic that must be encrypted (as sub1, sub2..)

  2. is there an 'access-group outside_access_in' access list present in the pix the corresponding traffic - check - the pls

  3. by nat (inside) 0 access-list inside_nat0_outbound, include all your inside subnets that must have access to the remote subnet

  L3 switch:

  1.I see a default route pointing to your router 3640, so pls add a static route to your remote subnet pointing to Pix

  IP route 192.168.1.0 255.255.255.0 x.x.22.2

  2. pls check in your L3 switch, wheter the appropriate subnets sub1, sub2 are learned properly via the conifugred Eigrp VLAN respective

  for example .sub2 and sub3 learning with leap following 8.2, sub 5 via 30.3

  Pls try to understand the topology and make configuration changes and let us know the results

  concerning

  k VB

• How to reduce the space between text and Image

  I am trying to wrap text around an irregular shape in InDesign CS4. I used the pen tool to mark the outlines of the image, crop the image, then selected the outline of the pen and pasted the image into the outline. With parameters defined for the TextWrap is in this dialog box, text wrapping seems in good shape on the right side, but he has too much space on the left side.

  

  If I try to reduce the space even further away, it is only on the right side of the image, not the left:

  

  It's the same thing for all my irregular images where I try to wrap the text. How can I reduce the white space to the left of the picture?

  You can use direct selection and the pen tool to change the skin path in repositioning of anchor points and guidelines and adding more anchorpoints etc. In this way, you can move the path of the scarf to the inside a little more to allow the best fit of the text.  To lock breaks in a bit more on a line-by-line, take into account settings composer to composer Adobe single-line (Control Panel menu)

  You can also try to allow hyphenation. With the text aligned to the box on the left will always left a little look gappy I think. However allowing hyphenation will get InDesign to cut the breakpoint to the left of the object with the text, as well as at the end of the line wrapping.

  Also if you change the alignment for Justified, you will also get a better result.

  On a related side note, I had usually advice my trainees do not to wrap the text on the left and right sides, when the object with the scarf is placed in the middle of a sentence. It makes reading more difficult phrases.

  Hope this helps,

  CARI

  --

  Twitter.com/carijansen

• Can someone show me an easy way to reduce the space between lines of text

  Hi, can someone show me an easy way to reduce the spaces in line in my text. Currently, they number about twice as big as I would like. I hope it's just a setting in the CSS that's easy to change even if I think I have tried everything. I hope you can help, thanks in advance. -Jason-

  Hi thanks to everyone for their contribution. I finally solved the problem thanks to a previous post. "Murray" posted this info and it worked like a charm.

  Open the page in DW. View the CSS with WINDOW Panel | CSS styles, click
  Click the new CSS rule at the bottom of the unified CSS panel, click
  the Middle option (Tag) button, enter "p" (without the quotes) in the tag: field,.
  Click this radio button at the bottom of the document, and then click OK.

  The margins are styles of box model, so select the category box and in the
  Margin field (you can leave the check box selected), enter a zero. Click OK,
  and you have created a rule of CSS stylesheet on the page that should look like
  -

  Geddit?

  Thanks again... until next time,.

  Jason

• Reduce the speed of Wi - Fi?

  I want to reduce the 48 MB/s of 150 Mbps Windows7 wireless connection - is it possible

  I'm in a hotel in a Turkey - two laptops work - there is no
  Only difference I can find
  Work for laptop - 48mbps
  Lack of portable - 150 Mbps

  It is not possible. The speed that you find is not the speed of the internet. It is the speed between router/Wireless Access Point (WAP) and the numere. The speed depends on the technology used, for example, n supports a maximum of 150 Mbps so that a and g supports 54 Mbps and b 11 Mbps. As in the laptop to 'work', the speed is 48 MB/s and in the mobile 'default' speed is 150 MB/s, it is very likely that the laptop failed supports n mode and the 'work' Mobile supports a/b/g modes only and n mode.

  But even if the two laptops support n mode there are chances that laptops work in the above specified modes for speed variation.

• How can I reduce the size of the taskbar (bottom of screen)

  The icons are the right size, but the bar is high

  Hello

  Firefox on Windows is now after display, scaling options that can display text and or larger icons on high-resolution screens.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Use values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase size of. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• Tecra R850 - How can I reduce the memory shared graphics card?

  Hi all

  I need help with a few questions:
  My system says I have 2, 66 GB RAM available for applications, services, etc. The rest (between 1.1 and 1.3 GB of RAM) is shared and reserved for the graphics card. I looked for a way to reduce it through the BIOS (how it works normally), tried an update for the bios jumps that he would add this feature. But it wasn't the case.

  I don't understand why Toshiba won't allow its customers to modifity this setting!
  I can understand putting such a context by default, but also giving an option for advanced users to change this setting.

  2, 66 GB RAM are not very good and I often need more than that... 500 MB more of RAM for sys would be really nice.
  And 64 bit OSs don't are currently not supported in our society.

  Does anyone know if a way to reduce the memory shared to 500 MB for example?

  My system features:

  Windows 7 Pro SP1 (32-bit)
  Model: TECRA R850
  SERIALNO. : 7B042670H
  PartNo. : PT525E-03E00KGR

  Thank you in advanced for your answers!

  null

  As far as I know shared memory works automatically and laptop user cannot control it.
  There is nothing new and the same principle is on all Toshiba laptops.

  Sorry but there is nothing to do about it.

• I'm trying to reduce the duration of the google navigation and search boxes without any succuss. Numerious times the site was requested, but no response is the problem. I can change the size by using the line that separates the two boxes, but I only

  I added a cus 06/25/10, wanted to shorten the google search and navigation bars to see, but can't. Have re-installed the google toolbar, have chosen the version of firefox as my default tool bar and can then change the width, but when a box shortens the other if extension always fill the width of the screen. Customize toolbar doesn't give any options to reduce the width of toolbar, I am at a total loss. Would love suggestions if you have correctly fixed this.

  This has happened

  Each time Firefox opened

  is 25/06/10

  The address bar and the search bar have a flex property and take all available space.
  You can change the relative size of the two with this resizer between two bars.
  You can only do this by adding a lot of space in the view > toolbars > customize window.

  You can set a fixed width by defining the min-width and max-width for the same value.

  Add code to userChrome.css below @namespace.
  See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #urlbar-container {max-width:400px!important; min-width:400px!important;}
  #search-container {max-width:200px!important; min-width:200px!important;}
  

  You can choose your own values as long as the min-width and max-width for each bar have the same value.

• How to reduce the noise of the big FAN on Portege M400 with Vista

  M400 (vista with newer utilities for electric model) FAN blows very noisy constantly regardless of real need for cooling.

  Even with zero responsible jobs, less than 1% (flat curve) of the activity, the processor speed to 50% in the model of power and all power to the minimum settings, FAN does not reduce the speed. After a reboot, for a short time, the noise is bearable, we can conclude that the FAN seems to be capable of low speed.

  On all the M400, we, the problem is the same.
  How to work with M400 in an environment quiet?

  Hello

  Toshiba has designed the special version of the BIOS and it was a long time ago. This version of the BIOS has been designed prior to the launch of Vista, and now we can not say that it is not for Vista.
  Of course, it is not for Vista.

  In Vista, there is a fairly new situation. At first, I must say that it is well known that Vista uses more resources than Windows XP Home edition. Secondly, you know very well that M400 has a lot of background processes running. If I remember well under Windows XP Home edition, there was between 60 and 70, ongoing process. Can you please tell me how are running processes on your M400 running Vista?

  It's really not easy to say what to do. I think that you have two choices: either wait that Toshiba has do something (can take a long time) or try to reduce all the processes running and try to optimize the operating system. I don't think this will help a lot, but you can try.

• Reduce the size of the image

  A relatively simple matter. Using of 1456 CVS and a Basler VBAI camera A622F 3.0, how to reduce the size of the full image while grabbing a picture from the camera via an external trigger? For example, if the size of the real matrix of the camera is 1280 x 960 pixels, how can I reduce it up to 640 x 480 pixels when the acquisition of image while still watching the same area/image, but of course with a smaller image size (or less pixels per square mm)?

  I ask this question because while applying the script in VBAI, the time of the loop does not my request to go beyond 20 parts per minute. I need the same script applied on a small image so that it takes less time to run, which increases the throughput of the part. I'm sure I'll lose a few details while doing so, but I think it will be an acceptable compromise for my application. I tested (using benchmarking) between large sample images and 40% reduced the size of the same images. It takes a lot more time using the same script on the big pictures against children.

  The camera tool (Format 1 Mode 2 etc) help in this case? I would also appreciate if you have any other ideas / comments on this problem.

  Thanks for your reply bruce. But my version of the 3.0 VBAI watch tool geometry which has an option "resampling". The problem has been resolved by choosing a lower resolution on it.

  Have a great day.