Reference Dell 500 increase the size of the memory

Similar Questions

• Can I increase the memory on my old Satellite Pro P100?

  I have a Satellite Pro P100 (P6PA4E-002001EN) with only 512 MB of memory and the desire to know if it can be increased and if so what memory should I buy and it is easy to open the machine and adapt?

  Hello

  You can increase the memory on this laptop amazing plu of 4 GB of RAM.

  RAM modules compatible that you can use to upgrade:
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G (memory 1 GB DDR2-667 Kit)
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit)

  Check the underside of your laptop and there should be probably set with a cover of Ram screw. Remove it and you will have access to the memory locations.

• How to increase the memory of the phone to the xperia neo L?

  Hello

  I use the phone Xperia Neo L and I am facing many problems due to the internal memory. At first, I thought this could turn out to be this big problem, but now I am unable to update stuff on my phone because it is already filled with lots of updates. I moved all the mobile apps on my SD card and now I find myself with no memory of the phone even install xperia updates. Is it possible to increase the memory of the phone. Please help me with the problem.

  Thanks in advance.

  Greetings asifsk1992!

  At your convenience, please join our colleagues in Sony Mobile for assistance with your question. You can attach them to this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.

  Thank you for your message today!

• Is it possible to increase the memory on iPad 2? Probably an external device?

  Is it possible to increase the memory on my iPad2, without having to buy a new iPad?

  Memory on the iPad is fixed. There are some wireless flash readers who can provide extra storage space, but that does not really increase the memory of the device. It provides just a place to store the content.

• I want to increase the memory on the 2210CDS Satellite

  I have an old Toshiba Satellite 2210CDS/6.0 I want to give to charity. Until I do, I wanted to increase the memory from 64 MB to 128 MB minimum, because he seems excessive paging of memory under Windows 98, it slows down a lot too.

  The original 64 MB memory module is marked PC100-222-62, Toshiba p/n THLY6480H1FG-80. I ordered since equivalent barrettes memory 128 MB (PC100-222-620) from different sources. They fit well, but the memory is still limited to 64 MB, as evidenced by the page to configure the BIOS and Windows pages 'system '.
  The computer has only one memory location. What I am doing wrong?

  Ruud Hartog

  Hello

  This laptop is very, very, very ;) old

  However, the laptop can be improved up to 160 MB. 64 MB internal memory + 128 MB additional memory module

  The Toshiba recommend using these modules:
  128 MB - PA3005U
  64 MB - PA3004U

  Usually after upgrading the BIOS should automatically recognize the module.

• Equium P200D - how to increase the memory of the GPU?

  Hello

  I have a portable Satellite P200D-139 and I was wondering if there is a way to increase the memory of the GPU?

  This model of laptop is not known to me, but if there are shared memory graphics card you can extend it if you upgrade RAM.
  Check the specs of the laptop and see what amount of RAM max for this model of laptop is. I assume it must be 4 GB.

  By the way: check http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=43021

• I would like to know how to get a debugger and how to increase the memory on my computer of mocarosoft 7 HP

  I tried to find information on the question of the debugger, but I'm at a total loss about how to increase the memory of the computer.  Please help me, because I have school work on this 'thing'.

  The Windows debugger is included in the SDK

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8279

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463009.aspx

• Can I increase the memory?

  How can I increase the memory from 2 GB to 4 GB?

  Hello

  Check with your mother system/card manufacturer or a supplier of memory as Crucial,
  Kingston or PNY.

  Computer memory upgrade
  http://compreviews.about.com/od/memory/BB/aabybmemup.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can you increase the memory in the VM VCenter?

  I have just ESXi 4.1 Essentials. I have to close the virtual machine to increase memory and if I stopped it, then I can handle is no longer the VMs (which is a).  I had a hand on a part of the installation and configuration of the environment but you can try to provide as much additional information as needed.

  
  

  Hello

  Launch a vsphere client directly to the host than US having the vCenter server VM and stop of the VC and increase the memory to the VM and turn on. ?

  Let me know if this does not answer your question.

  Thank you

  Avinash

• Increase the memory of WebLogic built-in Jdev 11.1.2.3 - RedHat 5.8

  Hello:
  
  I am running Red Hat with JDev 11.1.2.3 5.8. and I would like to increase the memory of the integrated WebLogic Server. Here's what I've done so far:
  
  -Installed Jdev 11.1.2.3 on a Red Hat 5.8 - works well.
  -Created and run a simple application in Jdev in order to force the Server WebLogic integrated to create a default domain. -worked OK
  
  -I expected to find the setDomainEnv.sh file in the .../middleware/user_projects/applications/defaultdomain/bin directory
  
  
  But there are no files and no directory under the folder /DefaultDomain.
  
  When you use the WebLogic Server integrated into Jdeveloper, where is the setDomainEnv.sh file?
  
  For the WebLogic Server integrated into Jdeveloper, how can I increase memory for the WebLogic Server integrated into Jdeveloper?
  
  Thanks for the help.

  You can apply your changes to... / Middleware/wlserver_10.3/common/commonEnv.sh, this will ensure that you do not lose the settings when you need to recreate your integrated weblogic domain. After you have applied the changes to this file, you must remove your default domain name and re-create (both through JDev). The reason for this is the common file settings are applied to the areas where they are created, so your existing domain to have been built with the old (default) settings.

• have dell dimension 2300... try to increase the memory... bought 512 MB memory card "valid dell"... no problem, should I expect once I installed?

  anyone has similar experience

  Make sure that the new card is correctly installed in the memory location.  If it isn't, the computer may not start.

  Enter the BIOS Setup program, and check that the BIOS sees the right amount of memory.  Start Windows XP then go to Control Panel > System and check that Windows detects the right amount.

• Explorer.exe increases the memory usage

  Original title: Explorer.exe constantly increasing memory size... Windows 7 Pro 64-bit run on Lenovo Edge 73 i5 - 4570S / / 4 GB RAM / 500 GB HDD / PC Deskstop

  Dear support,

  Kindly help me on this issue.

  1. when I just reformat the PC and load back the OS (Windows 7 Pro 64-bit) and install dropbox version 3.0.5.

  2. then the explorer.exe constantly increasing memory size until the entire screen freezes.

  3. I had to install kaspersky version 10 with license and Malwarebyte s virus scan and to... etc... Once the scan is not virus on this PC.

  So now, what can I do on this issue?

  I need your help... I did it several time reformatting also have a question...

  Thank you and best regards.

  Scofieldbee88

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that explorer.exe increases the size of the memory and the screen freezes. I'll be happy to help you with your query. Let me ask you;

  1. When was the last time it was working fine?
  2. You did it no particular change in the computer before the show?

  The issue could be related to any recent change in software or hardware on the computer or any third-party software conflict. In addition, it is recommended that you use unique security software at a time so that he would not come into conflict with other firewalls.

  We will follow the methods below and check.

  Method 1: Run the troubleshooter of Performance.

  To optimize the performance of Windows, try to use the resolution of Performance problems to automatically find and fix problems. The resolution of performance problems check issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.

  Open the performance troubleshooting utility by clicking the Start button , and then click Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click check for performance issues.

  Method 2: Start the computer in safe mode, and then perform the clean boot in order to avoid any conflict of third party software.

  Step 1: Start the computer in safe mode.

  See: , start your computer in safe mode

  Step 2: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Additional information:

  Optimize Windows performance

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• increase the memory - systematic failure in vi?

  Hello

  I use a Framegrabber DLL to read an analog video stream. When the VI runs about 6 hours LabVIEW displays an error message "memory is full".

  When the VI works and I look at the memory usage in the Task Manager, I see that memory is increasing constantly.

  I guess the bug is inside the while loop, but I can't fix it.

  It can also be a problem with the DLL, but I don't know where to start. Can it have something to do with references?

  Please take a look at the screenshot.

  I closed the references. Is that what you mean?

  

• To increase the memory in my computer, I just get another memory card and add to the empty slots next to the already existing PC memory?

  I have 1 GB of RAM windows vista. It is rather slow. I would like to as DIY from 1 GB RAM to 4 GB. You just not sure if I would add simply individual 1 GB of memory for places on the motherboard to make 4 GB?

  Hello

  as you have only 1 GB of RAM, you could try readyboost as a less expensive alternative

  Read about the use of a flash drive for performance at the link below

  http://www.bleepingcomputer.com/tutorials/tutorial136.html

  and if you want to increase the RAM on your motherboard, use the crucial scan which you tell what is the compatible type and the size of RAM for your motherboard

  http://www.crucial.com/

• How to increase the memory capacity to send emails with attachments?

  I try to send a 530 MB video file to a friend, and the computer says memory is insufficient. Can someone tell me how to increase the amount of memory for my emals?

  Email size is based on your email provider and also the supplier of recipients. Most do not allow to send him something that big.

  Mine is 2 MB max.

  I use Skydrive and download files and serve as a link to your friend.

  https://SkyDrive.live.com/