ReferenceError: Window has no constructor: 325

Similar Questions

• CS5 - error 22:Window has no constructor

  I did experiment with some old sccripts on the pre-release version of Photoshop CS5 and they seem to work except those that have a user interface. Scripts that run on CS2, CS3 and CS4 launch an error message "error 22:Window has no constructor. I was wondering if someone had noticed this and if they were aware of any change in regards to writing scripts with CS5 and how to correct the problem.

  CJ

  Dear all,

  I have been bothered by this same Photoshop 22 error when you try to use the Photomerge feature or any other of the automaton in CS5 functions.

  My computer is a 32-bit Windows 7 computer, but it should certainly apply to Windows 64-bit machines and, possibly, the same logic may apply to the Mac but I do not know.

  I have not found a permanent solution but I found a temporary solution that will at least use the function for an opening of the program but if you close and reopen photoshop the problem comes back.

  Workaround instructions:

  1. Locate the "Adobe Photoshop CS5 Prefs.psp" file on your computer and delete or move elsewhere.  (I guess that by doing this, you may lose * your Photoshop preferences, but it will allow you to use photomerge and HDR so that you choose)

  2. under Windows, this file is located in the user folder under NAME C:\**USER * \AppData\Roaming\Adobe\Adobe Photoshop CS5\Adobe Photoshop CS5 Settings\ (replace * USER NAME * with the name of the user account Windows 7)

  3. after deleting this file or temporarily move out of this folder, you can then open Photoshop CS5 and use the Photomerge feature as much as you want.

  4. as soon as you close Photoshop CS5 the program automatically creates a new Adobe Photoshop CS5 Prefs.psp file so when you try to reopen the program it does not work yet.

  
  

  I hope this can be useful for some people and I hope that Adobe can solve this problem, I did not and do not rely on the statement this as a bug report at Adobe, being that I have not personally the program (always in 30-day trial), but all those who would like to, please do not hesitate to do so.

• When I open new browser window has reversed colors and no title of the window.

  Usual - when I opened 1 window at the top of the FF of the page appear like this http://imagestun.com/hosting/kartinki/ff1.jpg
  But when I try to open something in a new window, the new window has strange colors up and no title, like this
  http://imagestun.com/hosting/Kartinki/FF2.jpg

  If I switch from window mode to full-screen and conversely, everything is normal.

  I used Classic theme Reestorer addon, but the same problem occurs when this addon is uninstalled. Restaring computer, reinstall firefox etc. nothing helped, I still get these annoying menu white letters when I try to open the windows of firefox 2 or more.

  Is it possible to fix it?

  Launch Firefox in Mode safe
  
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration. Then restart.
  If there is still a problem, go to for Firefox > Extensions and
  Disable all add-ons that have something to do with the display of the page. Turn it back on.
  If there is still a problem, disable add-ons more. Continue until the
  the problem disappeared.

• iCloud for windows has stopped working - no data showing. Everyone knows this? Found a fix?

  iCloud for windows has stopped working - no data showing. Everyone knows this? Found a fix?

  I've recently upgraded to a Windows 10 laptop and have had problems with iCloud.  I can't access the photos at all - old hard drive Windows 7 accesses as before, except all my original photos (not Photostream - in folders) seem to have been deleted but it is now downloading Photostream when I activated my new laptop, but only back until June 2015.  However, other data seems OK - contacts, calendar, notes, etc.

• The address window has been reduced. How can I make it any longer so I can see the address (or most of them at least)?

  I've updated to Firefox for Mac 3.6.23. I have OS 10.4.11. Immediately, I noticed that the address window has been reduced to about half an inch. The search engine is long, like the address used to be window. It's not good for me. I usually use the address window to make changes and move it to a new page. I can't do it now. How can I make long once again the address window? Can I return to 3.6.22? I need this long window.
  Sincerely,
  Gerald E. Strickland
  Bradenton, Florida

  You can place the mouse between the address bar and the search bar, and it will become an icon of resize.
  
  Press the left mouse button and drag it to the right to make the larger location toolbar.

  You can also reset the related wides by deleting localstore.rdf in the Firefox profiles folder

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/LocalStore.RDF

• HP Jet 7: My hp stream 7 tab stucks in the configuration of the window has... (a picture of blue background with whi

  My hp stream 7 tab stucks in the configuration of the window has... (a picture of a blue background with white letters) its does not accept the entry while I also use an aotg with the mouse cable. So please help me its very urgent

  Try to hold the low volume button when the power and press the F11 key to enter the menu of system recovery.

• Satellite L305D-S5892 - Windows has encountered a problem

  Hello

  I have an I have a Toshiba-L305D-S5892
  With Vista Home Prem 32

  I have a few problems and am currently blocked.

  Each problem below, is a problem that I met after taking a few steps.

  * The 1st problem *.

  A few hours ago my screen was frozen just after I tried to install this codec from microsoft, so the only option I had was to do a hard reset.
  When my computer back on, I received this message:

  Windows has encountered a problem communicating with a device connected to your computer.

  This error may be cause of disconnect a device removable storage such as an usb external drive while the appliance is in use or by defective as a hard disk hardware or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Windows\system32\winload.exe

  Status: 0xc00000e9

  Info: An unexpected I / 0 error has occurred.

  I didn't have any usb device or removable in media.
  I can only access my utility series at the beginning, which is this menu: hand-Advanced-display-security-Boot - out

  * 2nd problem *.

  I opened my laptop and released the CD / DVD + RW, he started upward and now I get this message:

  For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07

  PXE - E61: Media test failure, check cable.

  PXE - M0F: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  * 3rd problem *.

  I downloaded the NEOSMART repair Cd.

  Once I'm in the System Recovery Options, it tells me to select an operating system. However it has not traded. If I press drivers to load, then a message tells me to insert the media, and then select drivers. I almost 'ok', and then am taken to explore, when there are a few system files and files (all empty)?

  I'm confused... any help?

  Hello

  For me, it looks like a problem with the system eventually installed the HDD failures.
  Why?

  Due to the issue described in point 2.
  PXE - E61: Media test failure, check cable error is displayed because the phone didn t find the installed operating system and try to boot from LAN.
  This happens especially if the HARD drive was not recognized by the BIOS.

  My recommendation;
  Access the BIOS and check if the HARD drive is listed there.
  If this isn't the case, then you will need to replace the HARD drive and reinstall the operating system.

  If the HARD drive is listed in the BIOS, then take a recovery disk and try to reinstall the OS again.
  If you have no recovery disc, then you can order it here.
  (I guess it's a Toshiba laptop model we)
  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  Good luck

• Satellite A500 - 1C0 - Windows has detected a problem with HARD drive

  Nice day
  Laptop shows me that Windows has detected a problem with the HARD drive. The laptop is running slow and chops. And when you turn it, it shows me Smart failure predicted on hard disk 1. Toshiba MK-5055GSX - (S2). Can you help me? (I m, CZ)

  http://img684.imageshack.us/img684/8434/smartm.jpg

  Hi Konyga,

  If you already have a warning on the internal HARD disk before Windows starts I would recommend sharing it and backup all data as quickly as possible.

  Is your laptop still under warranty?
  If Yes, you can get a new HDD to an authorized service provider. It would be free because it s covered by the warranty. All you have to do is contact with an ASP.
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

• security issue: "Windows has detected the Zeus virus."

  My MacBook Pro displays a popup indicating that Windows (Yes, Windows) has detected the Zeus virus on my computer and suggested that I call a phone number provided immediately.  Obviously some scareware.

  How to clean my MacBook.  I don't see anything on the web Support pages.

  Thank you

  Mike T IS

  This kind of message is a scam. Do not meet these messages.

  Force Quit Safari, then restart Safari while holding the SHIFT key.

  Phony 'technical support' / 'ransomware' popups and web pages

• Windows has encountered a problem with the DVD/CD on Qosmio G20

  has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...
  can someone tell me what is happening.
  Thank you

  On this path, it is not easy to say anything. Try to remove the drive from Device Manager, and then restart the device. The unit should be recognized and installed correctly.

  If you want to create data CDs using windows options please check disc recording option. Check the properties of the drive and check option under the recording tab.

  Good bye

• Satellite L40 - 14N: problem has been detected and windows has been shut down

  Help.

  My laptop worked perfectly well until my son used last night and went on various games.
  Since then when you turn it on, it is a blue screen that says: "a problem has been detected and windows has shut down to prevent damage to your computer.

  He said that he has downloaded something or added a new hardware or software.
  So, off it and tried.
  Have tried everything to make it work. tried to get into F8 and F12.

  Tried from the safe mode and the recovery disc tried following all the resulting instructions always blue screen.
  Not knowing what else to do. I have

  s he Knackared now?

  As I got the BSOD appears also after the use of the disk recovery and after a fresh install of the OS.
  Is this right?

  Unfortunately, buddy, but sounds more like a hardware problem as a problem related to sound.

  I would contact a technician for laptop and organize an audit of the material.

• Windows has detected an IP address conflict

  Windows has detected an IP address conflict what it means?

  Windows has detected an IP address conflict what it means?

  These IP address conflicts are generally on your router. Turn off the router for 4 or 5 minutes, then restart. You may need to restart one or more devices (computer, wireless printer, etc.) after the reboot of the router.

  Don

• My flash drive which was a backup of my system windows has been accidentally immersed in water. When it is dry can still be used without destroying my USB port?

  My flash drive which was a backup of my system windows has been accidentally immersed in water.  When it is dry can still be used without destroying my USB port?

  Hello

  Put it in a bag of rice for a few days or more. -seal the bag.

  If you remove all the moisture, it shouldn't affect the USB ports if nothing is
  possible. Usually it is not a problem if the moisture is removed.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error: Code 43; Windows has stopped this device because it has reported a problem whiel trying to use Cyberlink Webcam

  Title: cannot activate cyberlink webcam

  My cyberlink webcam was working fine until today. It will not turn on. After you apply the troubleshooting suggestions, I received a reply as follows: 'windows has stopped this device because it has reported a problem. (code 43) What is - this and how to solve my problem. I have a HP Pavilion g6. Help, please!

  Hello

  -Did you do changes on the computer before this problem?
  -What is the operating system installed on your computer?
   
  The error code you get is due to one of the engines that controlling the device notified the operating system that the device has failed in some way.
  Method 1: Run the Microsoft FIXIT from the link and if the problem persists.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2: Uninstall and reinstall the USB controllers
  You can try to uninstall the drivers and also scan for any hardware changes in Device Manager.
  (a) open Device Manager by clicking Start , and then type Device Manager.
  (b) expand the Controllers of Bus USB section by clicking on the '+' sign.
  (c) Uninstall each of the devices under the USB Controller section by right-clicking on each one, and then click Uninstall.
  (d) close the Device Manager and restart the computer.
  Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.
  For reference:
  Updated a hardware driver that is not working properly
  http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Method 3: If the problem persists, I suggest you to follow the steps from the link and check if it helps.
  Code 43: Windows has stopped this device because it has reported problems
  http://TechNet.Microsoft.com/en-us/library/cc725873 (WS.10) .aspx
   
  Hope this information helps.

• Explorer Windows has stopped working when you click FLVfile

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

  Hello

  What version of the windows operating system is installed in the computer?

  I suggest you to see link and check. (That applies to windows vista and windows 7)?

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.