Refresh page jsff

Similar Questions

• ADF refresh page with page fragments jsff jsf after the set session variable

  Hello.

  I have a model that includes a button that allows you to select a profile, you push the button appear available profiles, choose one and press to accept. After that, I put a variable session successfully.

  I have a page of 'First' of jsf with two fragments of page jsff after seeing a link. The display link is composed by a headerView and detailView. The headerView had a variable binding. What I need, is that this parameter (bindVariableParameter) can be defined by the session of the model variable.

  That's what I get:

  I am in a homepage (separate Application Module), model button is pushed until I load "first" jsf page and after that, I go to the page jsf 'First', that information is loaded successfully. What I do in the Application Module is something like this:

  protected void prepareSession (one session) {}

  SessionScope card = ADFContext.getCurrent () .getSessionScope ();

  Company string = (String) sessionScope.get ("compId");

  System.out.println ("Default Comapny in British Colombia is:" + company);

  super.prepareSession (session);

  this.getSession () .getUserData () .put ("The company", company);

  System.out.println ("after the definition userData value card BC");

  }

  And in the variable binding expression of the headerView that I use:

  adf.userSession.userData.Company

  It works very well! But!

  When I press the button again and I chose another profile, the info is not updated. In the headerView or in the detailView.

  Also, when I go to the 'First' jsf page (without previously pressing the button model), I had no info, which is just, because I have no session variable. After I have press the model and select the profile, but the page is not refreshed.

  I tried many ways to this, but I'm lost.

  Could you help me?

  Kind regards.

  I'm not sure that understand your use case. What do I get, you set a parameter after that you press a button on the home page to pass this parameter to the first.jsf.

  Why don't you implement a method of the application module and call it directly with the parameter. The session of preparation will not be called whenever you browse but only init am.

  Do you need the parameter in the layer model or only in the display?

  Timo

• Page jsff ADF and the F5 key

  Hello

  I use jdeveloper 11.1.1.6

  My situation is, there is a table on page jsff, and there is a button "Refresh" that, when click on it, will update the table with the most recent values, it works fine.

  Now the user want when press the "F5" key, will be the same as clicking on the button "Refresh", not "recharge" the jsff page.

  I think JavaScript is the only way to do it, and I can find many examples of code press 'F5' (keycode 116), but how does leave jsff page capture the 'F5' key and call the JavaScript? I know that the way in which clientlistener adds a component, for example a button and when clicked to call JavaScript, but have no idea how to call JavaScript on button, tried document.onkeypress, but did not work.

  Thank you

  On the definition of the button refresh, the java script function is only triggered on the events button on the Refresh button.

  Here is the code example to manage the F5 key:

  
       
            
       
            
                 window.onkeydown = function (event) {
                      if ((event.which || event.keyCode) == AdfKeyStroke.F5_KEY) {
                           alert("F5 Pressed")
                           //Write your logic here
                      }
                 }
       
  
  

  Jean Lou

• Dynamically link static VO to a component in a page jsff

  Here is a simplified scenario based on what I want.

  • I use ADF - BC to the data model.
  • I jsff page that displays information one by a couple of different user interface components (say: af:selectOneChoice & af:table).
  • The components get data via a data control corresponding to a static instance of the VO (say FirstVO) in my main AM.

  Single page works fine.

  • Now I have I have different static VO (& instance VO) say SecondVO (similar to FirstVO structure, say FirstVO & SecondVO to implement the same interface).
  • I want to develop a new screen where I want to reuse the same page jsff (page/bean UI feature) but to do it to serve as a control/data instead of the FirstVO the SecondVO binding.

  What is the easiest way to do this?  Basically, I want to avoid duplicating the UI contained in a page different identical jsff.

  I use J dev. 12.1.3.0.0

  Thank you

  Duncan blog a similar solution https://blogs.oracle.com/groundside/entry/towards_ultra_reusability_for_adf

  Timo

• Unable to return items on the page .jsff in Jdev 11.1.1.7 after migration form Jdev 11.1.1.5

  Hi all

  Previous version of Jdevloper 11 g: Jdeveloper 11.1.1.5

  Current version of Jdevloper: Jdevloper 11.1.1.7

  Problem: When migration usecases of Jdev 11.1.1.5 to Jdev 11.1.1.7 components .jsff are visible correctly.

  Description: ADF usecases are developed using Jdev 11.1.1.5 contains .jspx, files, .jsff etc are clearly visible when we are opening in version jdev 11.1.1.5 and works very well.

  But we same usecases migration higer version using jdev 11.1.1.7 we are facing some problems @ page opening of the components (.jsff or .jspx) are not displayed as the previous version jdev.

  For example: form Drag and Drop VO works in page .jsff as an af:table can be quickly with the af:table structure. (Jdev 11.1.1.5)

  But in Jdev 11.1.1.7 components af:table are not rendered correctly.

  There all JSF libraries must be updated to the requried?

  Note: we compare the source code of af: table component both are the same in both versions (Jdev 11.1.1.5 and Jdev 11.1.1.7).

  Please help us.

  Thank you

  Kumar

  Hi Timo,

  Thanks for your reply.

  We are created the new workspace with the new adf web application (create a new ADF Applciation in Jdevloper 11.1.1.7) works very well. but only migration usecases just this problem.

  Thank you

  Ajay

• Show regions in a different area on a page (jsff or jspx)

  Hi all

  I have a requirement where I need to display several taskflows as a region in different places in a page (jsff or jspx). Let's say I have three taskflows dropped as a region (for for example, region1, region.2, elle3) I view on a page and assume that the regions should be at 3 different positions (for eg., position 1, position2, poste3) on the page. The requirement is to display regions to the dynamically specified locations.

  For example,.

  For client A, view region1 position 1, region.2 position2 and elle3 to poste3

  For client B, view region1 position2, region.2 to poste3 and elle3 to position 1

  For customer C, display region1 to poste3, region.2 to position 1 and elle3 at position2

  I wonder how I can achieve this. If anyone could be kind enough to shed some light and explain how I can achieve this?

  Thank you

  Mahesh

  No, the link does not solve this problem.

  When you drop a region on a page as a dynamic reason, a bean is created that contains the path of the region to show. Regions more you drop on a page the mute these URLs are stored in the bean. You're playing with dynamic regions see you how the bean method are used to switch regions on a page. Then you implement the code to calculate the area to introduce and define the right url. See https://blogs.oracle.com/shay/entry/adf_dynamic_regions_switching_just and Articles Oracle: back Bean of switching to dynamic region | Oracle ADF

  Timo

• Calling a Java method in a page JSFF fragment.

  Can someone tell me how I can call a Java method in a page JSFF fragment?
  
  Here's an excerpt from my jsff (My.jsff):
  
  < af:column sortProperty = "CrtdByUserid" sortable = "false".
  headerText = "#{customstoregroupviewcontrollerBundle.USER_LABEL} '"
  ID = "user" align = "center" >
  < af:outputText value = "#{rank." CrtdByUserid}"id ="ot5"/ >
  < / af:column >
  
  Here is the method of my Java (MyBacking.java)
  
  public String resolveUserName (String pUserId) {}
  try {}
  JCCRoleHelper jccrh = new JCCRoleHelper();
  Return jccrh.getUserName (pUserId);
  } catch (Exception e) {}
  return pUserId;
  }
  }
  
  I would replace "#{rank." CrtdByUserid}"in My.jsff with a call to the java method"resolveUserName (String pUserId)"of My.java by passing the value of" #{rank. " CrtdByUserid}"to return the string to fill the 'af:outputText = value'.
  
  Any help would be greatly appreciated.

  Hello

  create and save a bean inside taskflow, for example, name it userResolverBean.

  The bean code

  import java.util.HashMap;
  
  public class UserResolverBean {
  
      private HashMap _user;
  
      public UserResolverBean() {
          _user = new HashMap() {
                  @Override
                  public Object get(Object key) {
                      if(key == null)
                          return null;
                      return resolveUserName(key.toString());
                  }
              };
      }
  
      public String resolveUserName(String pUserId) {
          try {
              JCCRoleHelper jccrh = new JCCRoleHelper();
              return jccrh.getUserName(pUserId);
              } catch (Exception e) {
              return pUserId;
          }
  
      }
  
      public HashMap getUser() {
          return _user;
      }
  }
  

  and use it like this

  Cheers!

  Kind regards

  Published by: Santosh Vaza on August 8, 2012 11:48

• I customized my ff and edited a few scratches here and there, but after each reboot ff replaces! and my home/arrow/refresh page buttons are really becomeugly

  Hello

  I use FF for years, but now it is starting to disappoint me! I adapted my FF and added some scratches here and there, and normally, everything else as I want/set but... until a few days... every time I restart FF it replaces some scratches left to right and vice versa! Very annoying!

  Another problem is that my "home/arrow page (rear) / refresh" buttons have become so ugly and small and no I don't thick 'buttons' in the options.

  I don't really know what is the problem, but now it is starting to be very boring!

  Here's a printscreen BEFORE FF it's ruin: look how beautiful the buttons are and other things!

  [img] http://I3.lulzimg.com/1919c1d2a9.jpg line

  And here are FF ugly with ugly buttons and in the good uppercorner strips left the adblockplus should be on the right, but it is replaced by its me after that I restarted FF each time!

  I admit that when I saw that it replaces the scratches I UN-and/reinstalled FF and after that the buttons becomes too ugly....

  What could be the problem?

  This module has been modded to cancel the theme changes in Firefox on Vista and Win7 14.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/cstbb/

• There is no "refresh page" button: can we have back please?

  In Firefox 3.x, there is always a refresh button but I can't find anywhere in Firefox 4. Have I missed something or if it is lost in the transition?

  Firefox 4.0 has a reload/Stop/Go combined button that is placed at the right end of the URL/address bar. This will change:

  • When you type in the URL/address bar or in a empty new tab, you'll see the Go button; arrow pointing to the right on a green background
  • When a page loads, you will see an 'X' on a red background
  • Once a page is loaded, you will see the Reload button; circular right arrow

  In Firefox 4.0, you can move the buttons Stop/Reload of the URL/address bar and place them where you want on the toolbar. You can also make it appear outside the URL/address bar

  • as separate buttons on the toolbar, or
  • as a combined Stop/Reload button
  1. Open the Customize toolbar:
     • Firefox button > Options > toolbars
     • If you use the Menu view > toolbars > customize
  2. the buttons will show separately on the outside and to the right of the location of the URL/address bar while the window to customize the tool bar is open
  3. While the window customize the toolbar is open, you can:
     • Swap the two buttons or move them to any position on the toolbar.
     • If the order is "Reload - Stop", you'll get a combined "Stop/Reload" button.
     • Switch the order to 'Stop - Reload' or separate them also (as a 'separator' or 'Space' in the window moving customize the toolbar between them) for two separate buttons.
     • If you move the buttons or leave the buttons on the right end of the toolbar URL/address in the Reload-Stop order, will be combined in the Reload/Stop/Go button unique on the right end of the URL/location/the closing of the window toolbar Customize the toolbar.
  4. Once completed, click 'Done' at the bottom right of the window customize the toolbar.

  You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

  • Next-generation Java plug-in 1.6.0_24 for Mozilla browsers
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update the Java plugin to the latest version.
     • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
       • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
  
  
• See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
• Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
• Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
• Java test: http://www.java.com/en/download/help/testvm.xml

• modal apex and partial page refresh page

  Hello guys,.

  I have the following scenario. I have 2 pages in which one is a standard page with a classic report acting as the parent and the other is a template page created from a form that is bound to a database.

  I want to update the report of the parent page whenever any element is added to the database using the modal page. I am able to refresh the entire page parent. But I want a way that could be used to refresh only the report itself.

  Hope you can help in this area.

  Hello guys,.

  I thank very you much for spending your precious time on my question. Pavel_p as you suggested, using the dynamic action is the best option. I agree with that. I figured out how to refresh only the region I want.

  I created a dynamic action to get the theme of the ceremony on the parent page, where I selected the selection type-->, region--> {my breadcrumb, since this focus in the first place when the page focus return}. As suggested by Pavel_p I used the refresh, action that influences the type of selection--> region, region--> {report} and fire on the loading of the page--> no..

  It works exactly the way I wanted to. Once modal page do insertion and runs the dialogue process, he deals the parent page. I've used this event and got the thing that worked.

  Thanks to you all. Hope that it would also be useful for someone else. Feel free to comment on the pros and cons on this method for those who are about to use this method could get more details about what it will do.

  Kind regards...

  -shashikahk-

• Refresh Page OFA problem

  I have a table of advanced search as below.

  

  After the user research. they want to refresh the page by F5. After refreshing the page, also, it shows the same data for research. I want it as a new page load after every refresh with F5.

  aJohny

  Kind regards
  nanduh

  Nanduh,

  As I already mentioned, find the name of the function associated to the page and add retainAM = Y, the call of the function webHtml.

  Let us know if you get stuck.

  See you soon

  AJ

• translation Refresh page

  Scenario is,

  I have a page with a separator Panel on it fragment, I want to refresh only second facet of separator Panel on request, how can I do this?

  getViewPanelGroup () .getChildren (.clear ()); This line is it for me, I deleted all the components before you press the button

• ADF: Double in taskflow Page Navigation click on the row in the table on the page .jsff

  Hi all

  My 11.1.1.7 Jdev.

  I have a taskflow with two fragments (.jsff) pages. On the first page, I have a table when I double click on the row in the table that I want to go to the next page.

  I tried to call java script but I do not understand. How can I get it?

  handleNavigation is the only thing that you should not use in the adf. Read 'How to navigate in the stubborn workflow' in this http://www.oracle.com/technetwork/developer-tools/adf/learnmore/nov2010-otn-harvest-190744.pdf.

  Timo

• Sorry, something went wrong. You must refresh the page - refresh page

  I worked through my portfolio of Prosite Adobe portfolio. It seemed to work fine at first.

  However, in the last few days I started to see this alert at the top of the page in edit mode. Refresh does not seem to solve the problem and alert reappears.

  

  I think it has something to do with Typekit. It seems that the Portfolio does not accept any of my changes when you use Typeset fonts.

  I work with a subscription Cloud full creative and Safari 9.0.3.

  I appreciate any guidance.

  Thank you

  Mike

  Hello! Sorry to hear about this issue - certainly submit a ticket here: help.myportfolio.com and we can take a deeper look.

• Browser does not refresh page after validation!

  Hello all, I use JDeveloper 11.1.2.3.0

  I have a big problem here. I create a simple page and insert a form, a createInsert button and a button of validation , for example. I run this page and all is well. I create a new record, fill in the form, and then validate. Right now if I press F5 to reload the page, the browser asks me confirmation "to view this page, Firefox must send information that will repeat any action (for example, a search or order confirmation) that was carried out earlier." I do not understand why he should repeat any action, I checked for Sales transactions after the validation operation and transactions are clean. If I leave this page to another and back to the first it works fine, F5 refreshes without problem.

  If I have a table with multiple lines and that I have updated first line for example and then click on the third line and then perform a refresh (Confirm on above message), the third row will get the all the information of the first line...

  Does anyone know how to fix this?

  OK I found the real problem and the solution to it. As I said the reopening of the page brings no problem, but only to hit F5 don't. My buttons 'submit' and 'committed' a 'partialSubmit = false' who must perform a total of pages submitted in this case. Apparently this is not "detected" by the browser when you press F5, although the presentation is made. Change "partialSubmit = true' the buttons did the trick." Tung