Refresh the image

Similar Questions

• Refresh the Image loop

  I am new to Flex2 (mac) and looking for a way to update a mx:Image.
  I created a for-next loop, where is the source of a mx:Image
  change several times, but the software runs so fast that he won't use
  all the time to show me the new image. Is there a way to tell the Flash
  only to update its graphics?
  
  Thanks in advance!
  
  Jaap Cammeraat
  http://www.vergeerkaas.nl

  I created a solution with the Timer class!

• F5 does not show the images and style sheets

  When I load a page for the first time, everything's fine, however when I hit F5, page does not connect to one of the styles/scripts and images are not loaded at all. I tried to run FF in safe mode (7.0.1), which has not solved the problem.

  But any page of our system, including those with much simpler presentations gives the same exact error...

  Thanks for your help, makes us understand in this case after a lot of digging around... We use a 2.5 abyss to our web server. Appearantly, there is a bug with the length of the content on images (and any support files) do not set correctly (at all). When you load the page the first time all right, but when you refresh the images are read from the cached files, and FF 7.01 does not approve headers corrupt on the image files (behavior correct in FF, but stricter than in previous versions!). We have updated the Web server to version 2.7, which solved this problem... We found an old post that makes us in the right direction as well:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=682511
  Thank you once again and for all users of Abyss Web Server... UPGRADE TO THE LATEST VERSION OR YOU'LL HAVE THE SAME PROBLEMS WITH FF 7.01... !

• Update the images with the new version?

  I placed several images in InDesign with Place (command-D). I need to change the color of these images in Illustrator (in which I made the images). How can I replace the current images with new versions? If I save it under the same name when I put in InDesign, InDesign automatically refreshes the image when I opened the file again? Or I have to replace every image by hand (which is a lot of work). Change is not easily noticeable on the screen, but it is printing, it is therefore necessary.

  Thanks in advance

  -Eline

  If you save just, again the next time that you open the file in ID, you will need to update the links.

  Bob

• How do to update and refresh the main panel image appears inside the Subvi?

  Hello world

  I have an image to display the command that is in my main draw, and I have a Subvi making some process works inside.

  But what I did inside the Subvi cannot be seen in the main panel.

  I used the image session controls than nodes input/output for Subvi.

  If I use the view control image as input for Subvi node,

  I see that the actual time appears in the Subvi Panel,

  but this isn't what I wanted.

  someone at - it wise?

  aricn wrote:

  BTW,

  inside the Subvi, I pass the transformed result the Vale to property node or the Vale (signal), even I call the metheod "refresh view", nor have the effect.

  Strange.

  For example, it is your main VI (where is placed the Image display):

  

  It's your Subvi, where poster Image is updated by reference:

  

  Now, image display updated in Main.vi Subvi:

  

  Project (LV2012) as an attachment.

  Andrey.

• ID with refreshment/make of the images?

  I spent some time, Google, the search and looking through this community, and I couldn't find an answer to this.

  InDesign CC seems stuck sometimes on what looks like a draft mode for image content, often showing pixelation, which makes the elements of positioning a pain! All my settings are set to high quality screen, but ID seems 'stuck' sometimes unless I change the quality setting a couple of times. Is there a procedure to force ID with refreshment/make images?

  SHIFT + F5 forces a refresh of the screen.

• Refresh the underlying image of the dynamic object

  Hello

  I've done some basic settings in Lightroom, and then open the image as a smart object in Photoshop.

  If I decide to make any other changes in Lightroom how Photoshop for 'Refresh' of the underlying image?

  Thank you

  Will be

  Replace content or change of Photoshop, and lightroom (it should open in ACR).

• Can someone tell me if there is a way that I can put a webpage to load a new image whenever a visitor refreshes the page?

  I pray that I can find a way to do it without losing my mind/writing and troubleshooting of javascript. I would like to have three images per page main Department on the below website link, but I don't want to show them all at once. I want a new image is displayed whenever a visitor visits or refreshes the page. Does anyone have any idea if I can do this in Dreamweaver and how? Please help if you can.

  Here is the link: http://www.graphicmechanic.com/DEKALBCOUNTY/parks-and-recreation/index.html

  See the words in large print 'Parks and Recreation '. My goal is to have the next clown/face paint picture of him change, to something else, every time it loads. I would like to know if my explanation is confusing if you please.

  Please do a search on the Forum for 'random image '.

  You will find previous discussions of 200 +.

• How to refresh the value of image source

  I have an element of the image in a page fragment. When the page opens the source of the image is set to the URI of a gif file
  
  What I want, is to update the URI into another image, the value of a bean property once managed Exchange.
  
  The image component is bound to a property of the managed bean, pageAnimationImage.
  
  I'm new to ADF and tried to set the trigger part when the value of the property is set and also the true clientComponent of the image
  AdfFacesContext.getCurrentInstance () .addPartialTarget (pageAnimationImage);
  
  I searched this forum and other blogs but could not find anything related.
  
  I would really appreciate if anyone has a suggestion or point me to a related case.
  
  TIA

  Use an EL to get the URI of the image as
  The bean code:

      public String getImageURI()
      {// change the uri depending on your logic
          String uri = "/images/image1.gif";
          if (other_property_is_true())
               uri = "/images/image2.gif";
          return uri;
      }
  

  Page code

  You must always send the ppr to the immage after your property changes.

  Timo

• Problem after setting some preferences in Firefox, it began to reload all the images in the visited web pages previously, which resulted in a significant slow

  I spend time with the preferences of Firefox where I was set up, after a few tweeaks, he began to reload all the images previously visited web pages, one of the sites where my own: http://netsalg.biz so I know that's not the question, but this resulted in a significant slowdown of the browser - what is my next step - a new installation? or can it be fixed

  try a reset to reset all preferences of firefox: Firefox Refresh - reset the parameters and modules

• Writing to the nodes property DAQmx channel does not refresh the channel values

  Hi all

  I have a riddle.  I created a task programmatically in LabVIEW and programmatically added several analog input channels to the task.  It's easy.

  I wish that my user must be able to modify the individual channels within the task.  To this end, I created a set of screws that allow it to change the settings appropriate to the channel (for example, if it is a channel of thermocouple, it can change the type of thermocouple, CRC value, etc... If it is a strain gauge channel, it can change the coefficient of fish and so on).  These screws all works beautifully, like the VI where they live.

  The specific question that I have is that writing to the channel property nodes refreshes not communication channels.  See the images below.  The first image is the code that needs to define new channels of communication:

  

  Note that immediately after setting the property nodes, I read their values back, just to see what comes out back.

  The second image is an image of the public Service immediately after the execution of this VI.  Note that the values read from the channel property nodes did not updated to match to the set of values, but instead kept their initial configuration values:

  

  What I am doing wrong?  I fought this for a few days now and I'm stumped.

  Thanks for your time!

  Diane

  Hi, Diane.  A week ago, I also had a problem changing the channel properties (not sure that our situtions are exactly comparable, but...).  My 'solution' to want to change the appearance of the task was to just throw the original task and recreate all the elements of the task from scratch.

  I've not done enough 'experiments' to work when you can and cannot change, but am now much more cautious...

  Bob Schor

• I can't see changes in a folder unless I go up a level and then re-enter folder, for example, create new folder, rename the folder, rotate the image etc. Can someone please?

  I do not see changes within a folder, except if I go up a level and then again enter the folder, for example, create new folder, rename the folder, rotate the image, etc..

  By pressing the "F5" key would probably be to refresh the folder.

  See if this article helps you with this problem:

  "List of the files in the Windows Explorer folder is not refreshed after that you create, move, or delete files"
    <>http://support.Microsoft.com/kb/823291 >

  HTH,
  JW

• Random BSOD and I do not know why.__Unable to load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32

  I don't know why this is happening, but I'm getting random BSOD now and then. I tried to point out my system to see if it generates a BSOD, but multitasking 3d and photoshop programs and what's not stress, then when I least expect, BANG! BSOD.
  The last of them, that I had now was in the middle of the night with almost no programs running. The system had worked for some time (one or two days), but nothing was he pointing out at the same time.

  What I think happened was: our microwave shorted out and caused a fuse to blow. But it was on another grid in our House (I hope I make myself clear, because I'm not used to talk about stuff like this in English!) so it should not affect my computer. But at the same time my microwave said "Thank you for everything!" my computer would BSOD. The thing is that my modem, my switch, my router and my NAS is connected to the electric network and my short circuted of switch. And my computer is connected to the switch cable.
  This effect possible that excess tension (or something) has short circuted my switch and 'jumped' power to the switch and on the cable and sending there is a shock to my computer? Or am I just paranoid? Laughing out loud

  I know that the controllers are pushed to the limit of the memory and therefor tolerate very little when it comes to electricity. I ran MemTest4.00 14 passes but I came with nothing. But memtest that tests memory, not the controllers, right? I am watching a fried motherboard?

  I did a windb, but I don't understand what he says. Could someone please translate this for me and give me your opinion?
  In addition, when you run windb, it's tell me am I wrong symbols. -What this means, and where can I get the symbols he wants? And what symbols?

  Microsoft (R) Windows debug 6.12.0002.633 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\Mini042910-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer SingleUserTS
  Computer name:
  Kernel base = 0xfffff800 '02c4c000 PsLoadedModuleList = 0xfffff800' 02e10dd0
  The debugging session: 23:43:16.368 Thursday, April 29, 2010 (UTC + 02:00)
  System Uptime: 3 days 5:21:50.657
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntoskrnl.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntoskrnl.exe
  ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ................................................
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {fffffa7fffffffea, 2, 0, fffff80002c5a95c}

  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  Probably caused by: ntoskrnl.exe (nt + e95c)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: fffffa7fffffffea, memory referenced
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80002c5a95c, address memory

  Debugging information:
  ------------------

  The kernel symbols are FALSE. Correct symbols to do the analysis.

  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************
  *************************************************************************
  ***                                                                   ***
  ***                                                                   ***
  Your debugger is not using the appropriate symbols *.
  ***                                                                   ***
  In order for this command works correctly, your symbol path *.
  should point to .pdb files have the type information complete.      ***
  ***                                                                   ***
  Some (such as the public OS symbols) .pdb files are not *.
  contain the required information.  The contact group that *.
  you provided with these symbols, if you need this command for *.
  work.                                                          ***
  ***                                                                   ***
  Type referenced: nt! _KPRCB *.
  ***                                                                   ***
  *************************************************************************

  ADDITIONAL_DEBUG_TEXT:
  Use '! findthebuild' command to search for the generation of target information.
  If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.

  MODULE_NAME: nt

  FAULTING_MODULE: fffff80002c4c000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 4b7d238f

  READ_ADDRESS: could not get nt! MmSpecialPoolStart
  Unable to get nt! MmSpecialPoolEnd
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  fffffa7fffffffea

  CURRENT_IRQL: 0

  FAULTING_IP:
  NT + e95c
  fffff800'02c5a95c?              ???

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  LAST_CONTROL_TRANSFER: from fffff80002ca626e to fffff80002ca64d0

  STACK_TEXT:
  fffffa60 '01bde688 fffff800' 02ca626e: 00000000' 0000000 a fffffa7f ' ffffffea 00000000'00000002 00000000'00000000: nt + 0x5a4d0
  fffffa60 '01bde690 00000000' 0000000-a: fffffa7f 'ffffffea 00000000'00000002 00000000'00000000 fffff800' 02c5a95c: nt + 0x5a26e
  fffffa60 '01bde698 fffffa7f' ffffffea: 00000000'00000002 00000000'00000000 fffff800 '02c5a95c fffffa60' 04dbf8b0: 0xa
  fffffa60 '01bde6a0 00000000' 00000002: 00000000 00000000' fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000' 00000000: 0xfffffa7f'ffffffea
  fffffa60'01bde6a8 00000000' 00000000: fffff800 '02c5a95c fffffa60' 04dbf8b0 00000000'00000000 00000000'00000000: 0 x 2

  STACK_COMMAND: .bugcheck; Ko

  FOLLOWUP_IP:
  NT + e95c
  fffff800'02c5a95c?              ???

  SYMBOL_NAME: nt + e95c

  FOLLOWUP_NAME: MachineOwner

  Nom_image: ntoskrnl.exe

  BUCKET_ID: WRONG_SYMBOLS

  Follow-up: MachineOwner
  ---------

  I'm grateful for any help I can get in that case.

  My system is: AMD 9950BE CPU, motherboard ASUS Crosshair II Formula, 4 x 2 giga OCZ 1066 mhz memory, Vista Ultimate 64 bit, ASUS 295GTX GPU

  Postal salvation,

  I think you're in luck. It chances are you are one of those rare cases where the BSOD may not be hardware related. In addition, it is actually pretty rare to have so many errors after a sfc... Wow. I think that alone has helped reduce the risk of an another BSOD and was good insurance against other problems.

  Do you have a chance to check the hard drive? Now, I would like to check the hard drive to see if there may be potential damage to the hard drive as well to help explain this number of errors (return to the material again).

  Here's how to new:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  I think that advice on the anti-virus scanning are also actually still relevant today. I have a scan of one of the two groups below as soon as you can and let us know the result if you can.

  virus/malware programs:

  Symantec:

  Works in Safe Mode and free:

  _ http://security.symantec.com/sscv6/WelcomePage.asp

  Trend Micro

  _ http://housecall.trendmicro.com/

  Ad-ware/spyware:

  Ad-aware

  http://www.lavasoftusa.com/

  Spybot Search and Destroy

  http://www.safer-networking.org/

  * It is an excellent versatile tool as it will both spyware and malware and has also a small footprint.

  See you soon,.

  Steve <> Microsoft Partner

• Why should I update in Help and Support to show the images?

  I just noticed that ALL of the help and support for my Windows 7 Home Premium 32-bit have been showing a broken image icon, but if I hit the refresh of the image appears. How can I fix so I don't have to hit refresh?  And if you answer improves my Windows operating system, as I saw in the Knowledge Base, I redirect every "Microsoft Help Desk" Virus detected on your computer phone scam that I get from your call center.

  Hello

  Thank you for the information. I appreciate your efforts to resolve the issue.

  I suggest you to check if you are facing the same question in another user account.

  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can check the link below and use the steps in the condition to set a user profile corrupted.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information helps.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Windows 8 guard flicker after refreshing the computer

  Original title: Guard split windows environment

  My laptop is windows 8... environmental windows guard flicker like a jump of frame if you play video games.  If im watching a movie in full screen it forces the application to exit the full screen also while playing games like fifa it minimizes by itself, as if you're in an environment like say the documents or any folder, you would see the image flicker as if you click outside the environment and click back on it in a few seconds. I don't know what's happening or why it does this.  Everything started after I made the option "refresh your pc without affecting your files.

  Hi Victor,

  Thanks for the reply.

  Method 1:
  You can install all Windows updates available including the optional updates and check if it helps.

  Method 2:

  If the problem persists, I suggest to start the computer using safe mode and check if the problem persists or not. If the problem does not occur in Mode without failure, you can set up your computer in a clean boot and check if it helps.

  
  Step 1:
  Start the computer in safe mode. At the start of the computer Mode safe with the minimum set of drivers and files.

  Start settings for Windows (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not occur in safe mode with network, try step 2:

  Step 2:
  Set up your computer in a clean boot state. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.