Windows 8 guard flicker after refreshing the computer

Similar Questions

• After refreshing the computer, when it is about to finish the update that went FAILURE CONFIGURATION WINDOWS UPDATES

  Hello... I just UPDATE my computer and then when I started to update, when he is about to complete the update this showd upward

  DEFAULT CONFIGURATION WINDOWS updates what to do about it... my OS is windows 8

  Original title: I update my computer

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I reinstall Windows XP? I don't have my OEM of Windows ME records. I don't have my Windows XP to upgrade the disks I got the OEM. It was a free upgrade to Windows XP with my purchase of the computer with Windows Millennium Edition.

  How can I reinstall Windows XP?  I don't have my OEM of Windows ME records.  I don't have my Windows XP to upgrade the disks I got the OEM.  It was a free upgrade to Windows XP with my purchase of the computer with Windows Millennium Edition.

  I'm sorry, but you will need a Windows 9 x / ME drive to provide during the XP installation from the XP disc is a version upgrade. There is no way around that. See if you can find a friend with an older operating system disk (not a recovery disk) to support qualification. Otherwise, you would need to buy the full version (not upgrade) of XP to install on the computer. MS - MVP - Elephant Boy computers - don't panic!

• I like the text-to-speech engine in Windows. I want to have the computer voice on Star Trek to be my text-to-speech voice. How can I do this?

  original title: Star Trek computer voice TTS

  Hello

  I like the text-to-speech engine in Windows.  I want to have the computer voice on Star Trek to be my text-to-speech voice.  How can I do this?
  It must be possible, but 2012 already.
  Another way to ask, where is a large collection / selection / compilation of the text-to-speech voices I can install?  Created by Msft or 3rd party.
  Windows 8 voices are not the answer, either.

  Hello

  Microsoft does not speech engines provide additional (voice), but there are a number of third-party products that support the new Microsoft Speech API

  Please use your favorite search engine and browse for voice of Star trek, which can be used for this purpose.
   
  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• After upgrading Windows XP to Windows 7, how can I get the computer to open strictly to Windows 7 instead of choosing "Windows 7 or an earlier version on windows"?

  After the upgrade, I want the computer to open to strictly Windows 7.  I get a page asking if I want to Windows 7 or an earlier version.  There also all programs on the file for XP that I didn't need since the upgrade, I transferred all my documents, files, etc.: on my removable hard drive.  How I can do all this extra to elimintate bits of information and make it turn on the computer faster and more accurate?

  Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem of viruses and problems to enter windows, after restoring the computer to a past date

  I recently got a virus on my computer, so rather than use my malwarebytes program to remove, so I tried to restore my computer to an earlier date, when I turned the computer back on it gave me a black screen with white text popping up every few seconds, how to do back in windows so I can try to get rid of this virus?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:
  

  I suggest that you start the computer in safe mode with network and then try to download and run a full scan of the system using the Microsoft Safety Scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  You can also try the steps in the link below and check if the problem persists.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

• HP Pavilion 17-e119wm: reinstall Windows 10 operating system after replacing the hard drive

  Hello, I bought a laptop HP Pavilion year last for work or school. He perfectly managed until yesterday when it was freezing to close unexpectedly. Waited about half an hour to see if it would work himself, I had several programs running at the same time. With no results, I did a hard shut down and left for about two hours. Trying to turn it back on, I was stuck on the HP Home screen for almost an hour. I turned off the and tried again. Sometimes I would be stuck on the startup screen, and sometimes he would show that he was about to auto repair, then the screen turns off. In addition, the recovery menu of the system through the F11 key did not work, so I did a Quick Test of system and received a short Drive DST hard failure.
  
  I plan to buy a replacement HGST 5 K 1000 1 TB hard Drive from the manufacturer; However, my warranty expired last month, and I'm not sure how to reinstall the OS (installed with Windows 8.1 then upgraded to Windows 10 factory), once the new hard drive in place.
  
  I've never done a HP system recovery Image, and I'm low on funds, so I'm not able to contact HP directly. Help, please. I am a student and I work from home, so I am at a loss without my system.

  If you want to reinstall Windows 10, then this is the part the more easy and free.  I understand, completed after the upgrade to Windows 10, then you can clean install Windows 10 site M$.

  On a work computer, go to the WINDOWS 10 DOWNLOAD, scroll down to the purple 'Download tool now 64 Bit' click that to let do its thing.  On the next screen, choose 'Create the installation media for another PC', then what kind of media you want to use DVD or USB flash.  Once created, install Windows 10 on the PC in question - when everything that fact it is activated.

• Windows Update causing various problem on the computer

  Original title: bad update?

  11/10, I downloaded and installed updates Vista KB2641690, KB2492386, KB972971644, KB2505189. There is more, but this format makes it very difficult to enumerate. My computer is now constantly lock up, and various closed functions (Explorer being the worst).

  My computer works horribly since the update. Is there a way to reverse the updates, or should I use a fixed disc and just pray that I don't have reinstall?
  THX

  Hello

  Method 1: I suggest you to restore the computer to a point in the update got installed then install the update one at a time to determine the cause of the problem is updated:

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: You can try to install the updates to the clean boot in order to verify if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: Try a manual install of update by downloading the update from the Microsoft Download Center:

  http://www.Microsoft.com/download/en/default.aspx

  Note: the number of the KB article in the search box to search for the update.

  Reference: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Monitor says no signal after moving the computer

  need help to make the monitor iluminate

  My windows xp is just moved to another room with a new distance map and functioning. After the move, the monitor says no signal! The computer and the monitor seems to work but the screen goes black after showing NO SIGNAL and goes to sleep.

  One step at a time.

  Also, I would also like to make these windows xp and windows live units communicate with each other in my home group.

  Bill enjoy life

  Hello

  I suggest you to check the physical connection that is connected to your computer?
  I suggest you to follow the steps and check.

  No input Signal message.

  Cause

  This problem may be caused by one of the options below.

  1. Monitor not connected correctly.
  2. Faulty hardware

  Solution

  Monitor not connected correctly

  Verify that the monitor is connected to the back of the screen, as well as the back of the computer.

  If the monitor seems to be connected correctly, check that a cable is not loose by disconnecting any cables that may be disconnected at the back of the screen (usually the data cable cannot be disconnected). Then unplug the data cable connected to the back of the computer, and then reconnect the cable. By connecting the cable to the back of the computer, ensure that the cable connection is strained. Most computers will also have the ends of screws that can be screwed to keep the connector in place.

  Faulty hardware

  If the connections look OK, unfortunately it is likely that the monitor or the computer graphics card is bad. To test this component is bad, either connect a different monitor to your computer or connect your monitor to another computer.

• Cannot install SP3 as it crashes even after recovering the computer by using a recovery disk

  I recently had an accident requiring that I reboot using my restore disk that were made when I first came to this computer. Since the restart, I can't access the updates from Microsoft Updates program. No error message, tells me that I can not connect. After several attempts, I think that the problem lies in the validation of the Windows program I use. I tried manually to run the validation program and to download security patches I've saved previous accidents. I show that SP2 is underway. I have a standalone download SP3, that when I upload in the system, crashes and burns. Back to the same thing, restart using the recovery disk. I realize for XP ends next month and its time to upgrade. But I would like to have this machine in working condition to use for other tasks.

  Original title: update XP

  You are a candidate for this patch before installing SP3...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

  .. you are if your PC is a HP Pavilion and Presario, Media Center and has an AMD processor.

  To find out if you have an AMD processor...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Your processor type is shown in the computer: section (see below)

  You can do a restore of the system in safe mode to get rid of the SP3...

  http://support.Microsoft.com/kb/306084/en-GB

  .. .or do another cover.

  Tricky

• Windows XP Setup hangs at «Setup starts Windows...» "after all the required drivers on the CD loading.

  My Pentium III 1.0 GHz computer (394 MB of RAM, disk hard 500 GB) crapped out on me after that I loaded soft PicturePerfect of Nikon.  For some reason, the Nikon software ruined my registry.  Now, whenever I turn on my PC, I get the BSOD with error "Unpaginated IPF in space".   I can't start my computer in safe mode or "start Windows normally" as I get the same error msg almost immediately without seeing the Windows logo and progress bar.  I can start my PC using the "last good known Configuration" and he will be starting the Microsoft Windows logo with the progress small downstairs bar, so I know that the hard drive is fine.  Then the screen goes black while WinXP is loading from the hard drive, and then the BSOD with error page comes up.  I suspect that there is incorrect data in a critical area of the drive where Windows requires data start correctly.   In the meantime, I can't boot into Windows at all because all Windows options lead to BSOD with the msg of error page.

  I resigned myself to reloading Windows XP from scratch, but I can't seem to get my original installation CD to not work.  I've reconfigured my BIOS to Boot CD, and then start the original Windows XP CD.  He reads and load it all very well, and then it hangs at «Setup starts Windows...» "I thought he had to test the equipment, but it remained in this State for 3 hours!  The "Welcome to Windows Setup" screen never came.

  I thought to use FDISK to the new drive of 500 GB and formatting on the errors on the hard drive, but I can't do since I can't complete the installation process.  I feel stuck in a bad situation where I can't enter BACK to FDISK and FORMAT my C: drive.

  Pls help!

  Thank you!

  Here's what I did and learned:

  1. I replaced my DVD burner with my CD - R original delivered with the machine and disconnected the 2nd CD - R.

  2. I disconnected my 2nd hard drive, in part to minimize the current of the power supply, but also to keep clean and simple start between a (hard) C: and D: (CD - R) drives.

  3. I re-tested my SDRAM using test mode full and deep.  To my surprise, I found not 1 but 2 SDRAM bad!  I replaced the original SDRAM 128 MB and re-directed tests of memory with the Diagnostocs memory of Windows and Memtest86 +.  All the 512 MB of RAM is perfect now.

  4. I started to new WinXP and have the msg «Setup starts Windows...» ».  This time, I waited for about 15 minutes and to my surprise the configuration screen came!  There is a long period of time between the msg «Setup starts Windows...» "at the start, and when the configuration menu actually comes to the screen.  I was able to partition and format my hard drive.

  Lessons learned:
  -Maintain the number of devices to a minimum so that it keeps unknown hardware failures to confuse the troubleshooting questions.
  -Test the RAM in deep test mode is important and test several times.
  -It could be more than 1 Bank of RAM can be bad so carefully test RAM.
  -Wait for the next Windows installation menu.  It is not instantaneous, but it will come sooner or later.

  Thank you!!!

• Only get a blue screen on the desktop after starting the computer.

  Original title: after the empty office startup

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Windows Vista operating system - why only empty office display blue screen with no program icon shows the office after the computer starts?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi osterjo,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  I suggest to start the computer in safe mode and check if it works very well.

  To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  Check out the link for more information on starting your computer in SafeMode below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Please return back with the results to help us continue with troubleshooting.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• GfxUI.exe has stopped working after rebooting the computer.

  Original title: error GfxUI.exe

  I've been running Vista business for a few years.  Last week, after the reboot, I get an error message that GfxUI.exe has stopped working.  After that I closed the error box, the PC works fine.  I updated the graphic driver Intel, but always the message.  Why now I get the message and how can I solve this problem?

  Hi Kea2300,

  Did you the latest changes on the system?

  This error message indicates to the Intel graphics driver.

  Because you tried to update the Intel graphics card, you can try to perform a clean boot and check if the problem persists.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Windows will not start after replacing the motherboard

  To begin, I must say that I am pretty clueless when it comes to computer skills.

  To summarize, I sent my CPU to a repair shop when my computer has stopped working. I removed my hard drive before starting the repairs because it contains confidential data.  They have narrowed the cause to a faulty motherboard and replaced by a new dissimilar.
  At the store, the guy had a vista 64 bit recovery disc so I have it home and tried to fix it. He said it will be a breeze and relatively bug free. As part of the Startup Repair, I tried to drive the Startup Repair, and tests were all successful except one. An error of diagnosis readings

  "Unspecified system configuration changes may have caused the problem.

  Repair action: repair and checking the integrity of system files

  Result: failed. Error code 0 x 490

  time taken = 720023 ms

  Everything I've done has led to a brief blue screen to the Windows loading screen and then it restarts itself.

  I also tried to restore to the previous two points, but it has also led to the square - a brief blue screen after the loading screen and restarts on its own windows. I'm not ready to reinstall vista and I can't afford to do it too, because I don't have enough disk space to perform another installation. Nor am I willing to reformat one of my two disks.

  If you need additional information on the specifications of the material that must be provided, ask me.

  IM at my end intelligence now, and I really hope to solve this problem.
  Thank you.
  Bryan M

  Hello

  I'm sorry, but you have to completely reinstall the operating system after replacing the motherboard with a different motherboard.

  "Startup Repair" is exactly that: a start NOT a repair system repairs

  What has happened, it is the operating system on your hard disk contains the drivers for the old motherboard and does not and you can't change drivers in doing what you do.

  The only way to solve this problem is to reinstall Vista.

  You wipe the hard drive and restart and make sure that the repair shop gave you the disc to install the new drivers of motherboard after you reinstall vista or download on the website of the manufacturer of the motherboard.

  And here a question for you to consider, too.

  If you bought a copy of Vista retail yourself, you can use the method above to a new installation and then install the new disk motherboard drivers.

  But, if your computer is a trademark of purchased manufacturer, HP, Toshiba, etc., you can not change the motherboard that the license of Vista OEM is stuck at motherboard the origin of the manufacturer that it has been installed on and now you canceled your Vista license.

  See you soon.