refusal of access svc EventLog

Similar Questions

• external hard drive, refusal of access permissions...

  I recently bought an external drive (G-Drive) to my back side ups.

  Now, I get an error message (occasionally) stating that I have no permission for its content and I can't eject the hard drive in my desktop computer.

  And when I go to copy the content to the hard drive, it just shows that he is about to be copied without transferring all content...

  I open the "Get Info" tab and there my user account to the content of the hard drive read/write.

  I should have access to the hard drive to do the above actions, but somehow it is not allowing me.

  I have another external hard drive and it ended all it activities.

  I am running Yosemite 10.10.5

  I'm offended on this one here... ~ has ~.

  Select the drive

  type

  CMD + i

  unlock and select "ignore permissions on this drive.

  

• denied access to the c: drive and all the mistakenley of windows programs.i refused my access to the system to my c: drive

  Hello

  This afternoon, I tried to install the home group. When I did, I got a message that windows could set up homegroup for this pc. (I'm not sure if this is relevant, but it's the last thing I did with windows before my problems started).
  -At the moment when I try to go to c:\, I get an access denied message.
  -When I go on c:\Users\Patrick then it shows my files and the directory.
  -When I opened a word from this directory document, it works (so I have read access).
  -I can't make a new folder in my home directory.
  -When I start for the mmc instance get Windows cannot access... 0x800704b3 error code after diagnose I get an error that convenience store could not start error code 0 x 80070005. (it happens with all windows utilities.
  -When I start safe mode it restarts after a few seconds (after he show users)
  -When I try to activate the account administrator to the command prompt it says access denied.
  -When I try to access the settings with the UAC, it does not.
  -When I start a normal program (like VS2008) it starts up, when I do as an administrator I get the same error that when im from the mmc.

  I have my PC from Vista

  Homegroup only works for Win7, Win7. So I don't know what you were doing. Try a system restore to before that you did whatever it is that you did. You can start with your Vista DVD and access to restore the system from there. MS - MVP - Elephant Boy computers - don't panic!

• I refused the access to my c: / drive. I keep getting messages like 'Windows cannot access the specified device, path or file. may not be the appropriate permissions for access you to them. »

  It all started when I tried to configure a standard user account for a person who will be watching my house for next week.  I am in the Properties tab of the C: drive and is under Security then changed the security to "ban" the person the right of access to the C: drive.  In doing so, we me "Administrator" also deny access to the c: drive.  Now I'm stuck.  Help, please

  Hello

  ·         Make sure you have this problem in safe mode.

  ·         Diagnose the drive in the search for errors

  ·         Make sure you have no virus

  Method 1:

   

  I suggest to restore the system to the Windows recovery environment and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Method 2:

  Try to access the files in safe mode. You can click the link below to see how you can start in safe mode in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  Try to take permission of the drive in safe mode.

  (a) open your computer and right click on your hard drive.
  (b) go to Properties.
  (c) click Security.
  (d) click on Edit under a quote "To change permissions, click Edit."
  (e) click on Add.
  (f) typeeveryone"in the white box.
  (g) then check in the "total " box Control
  (h) press OK.

  This makes the hard drive usable by everyone (all users and different computers)

  Also see link below to troubleshoot "access denied" when opening files or folders.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Hope that this information will be useful

• Refusal of access DEFRAGMENTION

  When I run the defrag, I get a message that reads c:\WINDOWS\system\dfrg.msc that access is denied.  I have an administrator account.  Any help would be greatly appreciated.

  Hi Carla Eloisa.

  First of all, you can try to temporarily disable the security software and check if it helps.

  Note: Activate security software after the resolution of the problem.

  For more information, you can consult the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If the problem persists, then you can go to the following link and try the steps and check if that helps:

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/b08898c4-084e-482F-BBDF-9ebd0ae0935c

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Refusal of Access Monitor driver

  I am installing a driver update for HP w1907 widescreen LCD on my Vista 64-bit system.  But get the message "access denied."  Chances are it has an of these darn questions "administrative rights", but I don't know the file name and Windows search does not find it.

  Once you have installed the correct drivers for your graphics card, the monitor should be detected automatically, but if (in rare cases) is not, do a right click on the HP *.exe package and then select run as administrator.

• I can't access my old hotmail account

  For some unknown reason I refuse me access to my old hotmail account so I created a new account.

  I have now I need my old account asccess but everytime I try to find, I get a security question and then turn round and round.

  Can someone help me?

  Sean

  Hi SeanSmith,

  Since the problem is related to Windows Live, you can also send your query to Windows Live Solution Center.

  Hotmail - Live Solution Center Portal

• Why access is denied on file I own, with effective control and without encryption?

  I have a number of files that I can not read because of what seems to be the refusal of access authorization.

  This computer is part of a domain, but was removed from the field.  The files belonged to a domain account.

  I use a local account in the local Administrators group.  The property of the files was changed to this local account.  Complete control of the local user was added to the security of the file.  All other entries of security have been removed.  The files are not compressed or encrypted.

  The file on which I concentrate displays all the permissions granted on the effective permissions tab.  It does not at all an audit tab.  On the other hand, a new file in the same directory shows the audit tab and is readable.

  This problem occurs on several, but not all the files whose ownership has been changed.

  What gives?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• Cannot access the network - Get unspecified error 0 x 80004005

  Hi all

  I have a strange problem that I hope someone can help me with.

  I have a PC Windows Vista Ultimate, newly installed, all the patches applied. Any other installed apps don't except MS Office.

  Not my problem, I have a NAS drive on my network and can be accessed by different machines on my network (IE. \\NAS)

  However for some reason any my Vista machine has ceased to recognize this. Now I can only connect via an IP address (IE. ( \\192.168.0.2).

  Whenever I have try type \\NAS he says "Windows cannot access \\NAS... etc etc" with a "unspecified error 0 error Code 80004005 x.

  He used to work, but now it does which is very weird. When I click on diagnose says that it cannot find \\NAS. However, as this network drive has a web front end, when I type its IP address there is no problem at all and I can access it, but not through windows Explorer! I use a TP-Link wireless adapter. I have a LAN connector normal that I disabled and enabled with no effect (although I have not physically connected them)

  I can navigate to Windwos Vista machine to it seems to work very well.

  Any ideas?

  Thanks in advance.

  Neal.

  If the regular way, you connect a reader could not be used and that you were forced to connect by ip, get error 80004005 would make sense, because it means that the rights or false refused/insufficient access permissions. Your network can have a parameter saying denied access by ip address, so either you might find this setting, or find a way to solve the original problem, making it impossible to connect as normal to you.

  I would check the firewalls, because your firewall or the firewall of the NAS could have been changed to not connect to the NAS or do not allow you to connect, respectively.

• Allow a URL by limiting access?

  I want to allow internet access for the hour of lunch for a group of computers. I assigned the INVESTIGATION period and set up two access restrictions on REFUSE for the morning and afternoon. Is there a way to allow these computers to access a URL (www.gmail.com) throughout the day?

  Is there a link where these access restrictions have been explained a bit more in depth what is available in the help WRT610N screen?

  Thank you.

  I'm afraid that you cannot allow these computers to access a URL (www.gmail.com) throughout the day if you refused them access to the Internet for the morning and afternoon...

• Windows WPD - access denied file system Volume driver

  original title: Driver Windows WPD files Volume

  I just installed the Service Pack 2 of Vista for 64-bit system.  Now, I have a message looking for driver for my printer.  When I search for it, I get the message

  Refusal of access Windos WPD files Volume driver

  I just installed the Service Pack 2 of Vista for 64-bit system.  Now, I have a message looking for driver for my printer.  When I search for it, I get the message

  Refusal of access Windos WPD files Volume driver

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Access denied to the program - Windows 7

  I installed a program that worked on Windows 7 before and he was met by security and everything. Now, whenever I try to open it, the computer refuse me access to use the program. I tried to reinstall the program, temporarily disabled the user access control, tried to repair by using the uninstall/change form and even used the system on my computer restore whole (twice in fact). Nothing has worked so far. Can someone give solutions or suggestions that I have not tried?

  Hi Jenni,

  Thanks for posting your query on the Microsoft Community.

  We are sincerely sorry for the inconvenience.

  I suggest you follow the link below and check if this can help:

  "Access denied" or other errors when you access or work with files and folders in Windows

  https://support.Microsoft.com/en-us/KB/2623670

  Please let us know if you need more assistance.

  Thank you.

• Cannot access remote network by VPN Site to Site ASA

  Hello everyone

  First of all I must say that I have configured the VPN site-to site a million times before.  Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks

  ASA local:
  hostname gyd - asa
  domain bct.az
  activate the encrypted password of XeY1QWHKPK75Y48j
  XeY1QWHKPK75Y48j encrypted passwd
  names of
  DNS-guard
  !
  interface GigabitEthernet0/0
  Shutdown
  nameif vpnswc
  security-level 0
  IP 10.254.17.41 255.255.255.248
  !
  interface GigabitEthernet0/1
  Vpn-turan-Baku description
  nameif outside Baku
  security-level 0
  IP 10.254.17.9 255.255.255.248
  !
  interface GigabitEthernet0/2
  Vpn-ganja description
  nameif outside-Ganja
  security-level 0
  IP 10.254.17.17 255.255.255.248
  !
  interface GigabitEthernet0/2.30
  Description remote access
  VLAN 30
  nameif remote access
  security-level 0
  IP 85.*. *. * 255.255.255.0
  !
  interface GigabitEthernet0/3
  Description BCT_Inside
  nameif inside-Bct
  security-level 100
  IP 10.40.50.65 255.255.255.252
  !
  interface Management0/0
  nameif management
  security-level 100
  IP 192.168.251.1 255.255.255.0
  management only
  !
  boot system Disk0: / asa823 - k8.bin
  passive FTP mode
  DNS server-group DefaultDNS
  name-server 192.168.1.3
  domain bct.az
  permit same-security-traffic intra-interface
  object-group network obj - 192.168.121.0
  object-group network obj - 10.40.60.0
  object-group network obj - 10.40.50.0
  object-group network obj - 192.168.0.0
  object-group network obj - 172.26.0.0
  object-group network obj - 10.254.17.0
  object-group network obj - 192.168.122.0
  object-group service obj-tcp-eq-22
  object-group network obj - 10.254.17.18
  object-group network obj - 10.254.17.10
  object-group network obj - 10.254.17.26
  access-list 110 scope ip allow a whole
  NAT list extended access permit tcp any host 10.254.17.10 eq ssh
  NAT list extended access permit tcp any host 10.254.17.26 eq ssh
  access-list extended ip allowed any one sheep
  icmp_inside list extended access permit icmp any one
  icmp_inside of access allowed any ip an extended list
  access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
  RDP list extended access permit tcp any host 192.168.45.3 eq 3389
  rdp extended permitted any one ip access list
  sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
  NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
  NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
  NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
  GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
  Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
  azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
  permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
  permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
  pager lines 24
  Enable logging
  emblem of logging
  recording of debug console
  recording of debug trap
  asdm of logging of information
  Interior-Bct 192.168.1.27 host connection
  flow-export destination inside-Bct 192.168.1.27 9996
  vpnswc MTU 1500
  outside Baku MTU 1500
  outside-Ganja MTU 1500
  MTU 1500 remote access
  Interior-Bct MTU 1500
  management of MTU 1500
  IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
  IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any outside Baku
  ICMP allow access remotely
  ICMP allow any interior-Bct
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  global (outside-Baku) 1 interface
  global (outside-Ganja) interface 2
  3 overall (RAS) interface
  azans access-list NAT 3 (outside-Ganja)
  NAT (remote access) 0 access-list sheep-vpn-city
  NAT 3 list nat-vpn-internet access (remote access)
  NAT (inside-Bct) 0-list of access inside_nat0_outbound
  NAT (inside-Bct) 2-nat-ganja access list
  NAT (inside-Bct) 1 access list nat
  Access-group rdp on interface outside-Ganja
  !
  Router eigrp 2008
  No Auto-resume
  neighbor 10.254.17.10 interface outside Baku
  neighbor 10.40.50.66 Interior-Bct interface
  Network 10.40.50.64 255.255.255.252
  Network 10.250.25.0 255.255.255.0
  Network 10.254.17.8 255.255.255.248
  Network 10.254.17.16 255.255.255.248
  redistribute static
  !
  Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
  Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
  Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
  Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
  Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
  Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
  Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
  Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
  Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
  Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
  Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
  Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
  Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
  Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server protocol Ganymede GANYMEDE +.
  AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
  key *.
  AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
  key *.
  RADIUS protocol AAA-server TACACS1
  AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
  key *.
  AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
  key *.
  authentication AAA ssh console LOCAL GANYMEDE
  Console to enable AAA authentication RADIUS LOCAL
  Console Telnet AAA authentication RADIUS LOCAL
  AAA accounting ssh console GANYMEDE
  Console Telnet accounting AAA GANYMEDE
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.1.0 255.255.255.0 Interior-Bct
  http 192.168.139.0 255.255.255.0 Interior-Bct
  http 192.168.0.0 255.255.255.0 Interior-Bct
  Survey community SNMP-server host inside-Bct 192.168.1.27
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  Crypto ipsec transform-set newset aes - esp esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
  Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
  Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
  Crypto ipsec transform-set vpnclienttrans transport mode
  life crypto ipsec security association seconds 2147483646
  Crypto ipsec kilobytes of life security-association 2147483646
  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
  correspondence address card crypto mymap 10 110
  card crypto mymap 10 peers set 10.254.17.10
  card crypto mymap 10 transform-set RIGHT
  correspondence address card crypto mymap 20 110
  card crypto mymap 20 peers set 10.254.17.11
  mymap 20 transform-set myset2 crypto card
  card crypto mymap interface outside Baku
  correspondence address card crypto ganja 10 110
  10 ganja crypto map peer set 10.254.17.18
  card crypto ganja 10 transform-set RIGHT
  card crypto interface outside-Ganja ganja
  correspondence address card crypto vpntest 20 110
  peer set card crypto vpntest 20 10.250.25.1
  newset vpntest 20 transform-set card crypto
  card crypto vpntest interface vpnswc
  vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
  card crypto interface for remote access vpnclientmap
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  name of the object CN = gyd - asa .az .bct
  sslvpnkeypair key pair
  Configure CRL
  map of crypto DefaultCertificateMap 10 ca certificate

  crypto isakmp identity address
  ISAKMP crypto enable vpnswc
  ISAKMP crypto enable outside-Baku
  ISAKMP crypto enable outside-Ganja
  crypto ISAKMP enable remote access
  ISAKMP crypto enable Interior-Bct
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  aes encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 40
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  Crypto isakmp nat-traversal 30
  No vpn-addr-assign aaa
  Telnet timeout 5
  SSH 192.168.0.0 255.255.255.0 Interior-Bct
  SSH timeout 35
  Console timeout 0
  priority queue outside Baku
  queue-limit 2046
  TX-ring-limit 254
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Server NTP 192.168.1.3
  SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
  SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
  SSL-trust ASDM_TrustPoint0 remote access point
  WebVPN
  turn on remote access
  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
  enable SVC
  tunnel-group-list activate
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  internal group ssl policy
  attributes of group ssl policy
  banner welcome to SW value
  value of DNS-server 192.168.1.3
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  group-lock value SSL
  WebVPN
  value of the SPS URL-list
  internal vpn group policy
  attributes of vpn group policy
  value of DNS-server 192.168.1.3
  Protocol-tunnel-VPN IPSec l2tp ipsec
  disable the PFS
  BCT.AZ value by default-field
  ssl VPN-group-strategy
  WebVPN
  value of the SPS URL-list
  IPSec-attributes tunnel-group DefaultL2LGroup
  ISAKMP retry threshold 20 keepalive 5
  attributes global-tunnel-group DefaultRAGroup
  raccess address pool
  Group-RADIUS authentication server
  Group Policy - by default-vpn
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  IPSec-attributes tunnel-group DefaultWEBVPNGroup
  ISAKMP retry threshold 20 keepalive 5
  tunnel-group 10.254.17.10 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.10
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  type SSL tunnel-group remote access
  attributes global-group-tunnel SSL
  ssl address pool
  Authentication (remote access) LOCAL servers group
  Group Policy - by default-ssl
  certificate-use-set-name username
  Group-tunnel SSL webvpn-attributes
  enable SSL group-alias
  Group-url https://85. *. *. * / activate
  tunnel-group 10.254.17.18 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.18
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  tunnel-group 10.254.17.11 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.11
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  type tunnel-group DefaultSWITGroup remote access
  attributes global-tunnel-group DefaultSWITGroup
  raccess address pool
  Group-RADIUS authentication server
  Group Policy - by default-vpn
  IPSec-attributes tunnel-group DefaultSWITGroup
  pre-shared key *.
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the rsh
  inspect the rtsp
  inspect sqlnet
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  Review the ip options
  class flow_export_cl
  flow-export-type of event all the destination 192.168.1.27
  class class by default
  flow-export-type of event all the destination 192.168.1.27
  Policy-map Voicepolicy
  class voice
  priority
  The class data
  police release 80000000
  !
  global service-policy global_policy
  service-policy interface outside Baku Voicepolicy
  context of prompt hostname

  Cryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
  : end
  GYD - asa #.

  ASA remote:
  ASA Version 8.2 (3)
  !
  ciscoasa hostname
  activate the encrypted password of XeY1QWHKPK75Y48j
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  DNS-guard
  !
  interface Ethernet0/0
  nameif inside
  security-level 100
  IP 192.168.80.14 255.255.255.0
  !
  interface Ethernet0/1
  nameif outside
  security-level 0
  IP 10.254.17.11 255.255.255.248
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  nameif management
  security-level 100
  no ip address
  management only
  !
  boot system Disk0: / asa823 - k8.bin
  passive FTP mode
  access-list 110 scope ip allow a whole
  192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  management of MTU 1500
  Within 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow all outside
  ICMP allow any inside
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT (inside) 0 access-list sheep
  Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.80.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  Crypto ipsec transform-set newset aes - esp esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
  life crypto ipsec security association seconds 2147483646
  Crypto ipsec kilobytes of life security-association 2147483646
  correspondence address card crypto mymap 10 110
  card crypto mymap 10 peers set 10.254.17.9
  mymap 10 transform-set myset2 crypto card
  mymap outside crypto map interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  aes encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 40
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN

  tunnel-group 10.254.17.9 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.9
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname

  Cryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
  : end
  ciscoasa # $

  Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas

  Would appreciate any help. Thank you in advance...

  If the tunnel is up (phase 1), but no traffic passing the best test is the following:

  Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.

  inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside

  The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).

  Test on both directions.

  Please post the results.

  Federico.

• easy transfer file permissions deny access

  I used easy transfer to move the files from xp to win 7 computer. the files transferred but refuse me access, even when I change the full security permissions. What should I do to restore the full permissions on my files transferred?

  Hello

  1. What is the error message you get while trying to access the files transferred?

  2. how you try to access the files transferred?

  Method 1.

  You must use the Windows Easy Transfer Wizard to open it. Click Start, type Easy Transfer and press ENTER.

  Follow the wizard to display on.

  Method 2.

  Ownership of a file or a folder:http://technet.microsoft.com/en-us/library/cc753659.aspx

  Refer.

  Windows Easy Transfer: http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  I hope this helps.

• Shared "Top N" gets access denied - the custom user interface

  I shared some dashboards for a standard user to vCops the custom user interface, and the "Top N" widgets do not work.

  So far, everything has been fine.

  I shared a dashboard home, as well as a vCops of the box and a pak of SAP management dashboard.

  All widgets 'Top N' display 'access denied to the requested page.

  Other parts of the same work of dashboard (home).

  Any thoughts?

  There is a permission that you add to the group to which you share the dashboard. There are permissions to a 'Top - N analysis' you must give to this group. In the contrary case, the refusal of access will appear when users in this group are attempting to access the dashboard in question.