Reg: error in import of master repository to odi11g to odi10g

Similar Questions

• Import of master repository and repository work

  Hello
  I need to import of existing master and referential work (XML file) of the Production Server on my ODI client.
  How can I work around this.
  I have to create a master repository, and then import this file.
  Provide a solution by steps for him.
  What else you need to import to create the same environment?
  
  Thank you.

  Are you talking about the source tables and the target table structure and data?

  If so, it is not a question of ODI but database. You must export the database (.) DUMP) and import them into your empty database.

• Remove the master repository ODI

  Hi, I installed the odi on my system and did some work. Now I want to reinstall ODI and start my work from scratch. I tried uninstalling, then put it back, once again. When I try to import the master repository I do not import by saying that there are already. How can I remove my master repository?

  I have no remote control. My version of odi is 11.1.1.6

  Kind regards.

  Yes, you should be able to do so, if this is a new installation of ODI. (which has no references to the old install-config)

  Take the new schema master will allow fresh configuration.

  Kind regards

  Santy.

• Master repository repository import and work failed ODI-23049

  Hi all

  I had installed 11.1.1.6 created master repository and repository work

  It is for the integration of ERPi with planning

  In ERPi 11.1.2.2 Guide mentioned sound that we have to import master repository

  1. Select file

  2 new

  3. the Master repository import wizard

  4 specify the details of connection to the schema defined in step e, created a new schema (oracle) or the database (SQL) (I had created new database sql here)

  5. use the repository of 500 ID and

  6 import path: select the location of the (odi/master directory (oracle/Middleware/Oracle_ODI1/oracledi/xml-refrence)

  in the light of the foregoing, I had chosen location (oracle/Middleware/Oracle_ODI1/oracledi/xml-refrence)

  7. taken automatically computer Microsoft SQL server

  When I click ok then its display ODI-23049 - error detected during the Intallation of the repository

  Click on details, I am getting below error when is
  

  Oracle.ODI.Setup.repositerysetup exception: oracle odi oracle.odi.setup.repositerysetup exception: The Master import source does not have a valid master export

  
  

  Working Import repository

  1. Select ODI Studio and then log in to the master repository

  2. Select the topology manager and select job repository

  3. create a new repository of work

  Use the repository of the 501 ID

  4. Select Designer, then import and select Import repository work

  5 specify the location of the directory /workrep odi

  I had talked about this above directory (odi/master directory (oracle/Middleware/Oracle_ODI1/oracledi/xml-refrence) )

  6. click ok then I get below error

  The imported file contains objects from a repository id 2, but this repository is not declared (IE object that since a repository with this id is not before imported beans) in the repository with id 501 target would you declare it and import procedures

  
  

  Thank you

  
  

  Hello

  Finally, the issue is resolved.

  The ERPI 11.1.2.2 Admin guide is very useful for me.  Santy response also help full for me. Finally successfully master Repositery and work Repositery are successful.

• Best way to import all of the objects located on a new master repository repository work

  Hello

  We have two separate master repositories, one for all repositories of development work (development, ST, UAT, IAT) and one for Production.

  What would be the best approach to export and import all the objects from the Dev repository in the repository of Prod work located on the master repository Prod.

  Internal ID of all repositories of work are different.

  We have tried to put everything in a solution and that export, but it does not work when we tried to import it.

  Successfully, we have exported and imported a simple scenario, but it is not very practical because we have more than 500 scenarios.

  Any suggestions welcome,

  Thank you

  NIC

  I have the same setup. I found it useful to group my scripts into folders and you can then export the records themselves, rather than the individual scenarios.  Import records in the same way that you would incorporate a scenario.  This means that I have only export/import of the 4 elements rather than 300.

• Creating master repository error: ORA-01031: insufficient privileges

  Hello
  
  I try to install ODI in my VM.
  
  I did the installation and creating master repository, I am getting following error:
  
  ORA-01031: insufficient privileges
  
  I'm using Oracle & created as ODI_MASTER user with administrator privileges.
  I will use it to load the metadata on planning (Version 11.1.2)
  
  Am I missing out on.
  
  Jitendra.

  Seems missing grants on the user that you use to create the master repository.

  you use Oracle... Grant connect, resource to . These two rolesa have sufficient access to db to create the master repository.

  execuute the sql code of the sys user

  Kind regards
  Amit

  Published by: amitgupta1202 on August 20, 2009 22:42

• ODI work and Migration of the master repository of prod Dev

  Hi all
  
  We have all the maps and other information in the Dev environment. And we have a new together upwards to the ODI prod environment.
  
  In dev and prod, repository IDS are the same. (Work of Dev = Master = 1; Work prod = Master = 1)
  
  I want to export rep and master rep dev work and import it in the Prod.
  
  When importing Master rep I get an error message: ' ODI 26005: you import an object from another repository with the same identifier. It is forbidden. »
  
  Can someone help me on this

  Your master repository and the production work should be different from each other.
  Thank you.

• Can I create several referential work by using a master repository

  I already have a repository creates in the topology Manager. I try inserting the new repository to work. When I try to save the new database server, I get the following error. Please help me, what I could do.
  
  com.microsoft.sqlserver.jdbc.SQLServerException: Violation of UNIQUE KEY constraint 'AK_CONNECT '. Unable to insert key duplicate in the object ' dbo. SNP_CONNECT'.

  The important thing in your error message is "AK_CONNECT". AK stand for secondary key (sunopsis) or unique key constraint (i.e., oracle). If you look for it in your database, you will find what is the problem. The same thing is also reported here: ORA-00001 unique constraint. AK_CONNECT broken

  So, essentially, you probabely try to give a name or / and the coordinates of connection that already exist if you look in the SNP_CONNECT table in the schema of your master repository.

• HPDM: HPDM replace self signed SSL certificates for server HDPM and master repository

  I am trying to replace the automatically generated self-signed certificates (issued to DM) issued by DM server HDPM and master repository.  I'm NOT arbitration FTPS, HTTPS embedded HPDM or CERT Thin Client Agent server.

  I already have CERT for the installation of our own internal domain CA for FTPS in IIS and the built-in Apache HTTPS server.  These work properly and pass tests of repository for both protocols.  I also have questions for Thin Clients of our internal CA very well.

  I am interested in the HPDM real server cert and cert master repository. These are generated automatically when the two services start.  They use a very weak MD5 hash and key RSA 1024.  I can't find any documentation around that, with the exception of troubleshooting, in which you can remove these certificates restart services and they will be regenerated.

  Here are the paths certs\key
  HPDM % install Path%\MasterRepositoryController\Controller.crt (Cert repository)

  HPDM % install Path%\MasterRepositoryController\Controller.key (repository key)

  HPDM % install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)

  HPDM % install Path%\Server\Bin\hpdmskey.keystore (Both HPDM server and repository Certs and keys) (not sure what format it is in.  It is not PEM and P12 ok I can say)

  There are also some HPDM % install Path%\Server\bin\hpdmcert.key.  Don't know what it is.  It's the key to the server HPDM but deleting it does nothing and it is never re auto generated in one of my tests.

  I am able to replace the Controller.crt and keys with my own files CA internal those emitted very well.  The service started and no errors occur.  However if I replace the Client.cert (HPDM Server Cert) with my own service will start but there are Socket SSL errors in repository logs and the HPDM server could not connect to the master repository. I have no idea where the key file is supposed to be for HPDM Server Cert.

  Can anyone help with this?  I can't find the configuration files for the service to generate their own certificates.  If I did I would try at least to change the config to do not use MD5.

  Hello

  These certiricates between HPDM server and MRC are not designed for customizable. Please submite one scenario if you have concerns of security on it.

  Just for info:

  hpdmcert. Key is for communication between the server HPDM and gateway HPDM

  hpdmskey.keystore is for communication between the server HPDM and MRC

  server_keystore is for the commhucation between HPDM server and the Console HPDM

• Master repository HPDM4.6 SP3 - problem

  Hello

  I have a problem with the implementation of master repository in HPDM 4.6 SP3 on Windows Server R2 2012.
  First I put basic information in the management of repository and I did a test that completed successfully (attachment #1).

  After awhile, I got an error of fixing #2.

  Then, I tried to view the contents of the master repository and I had a #3 fixing error.

  I tried to send two tasks to the test device - both failed ultimately (attachments #4 and #5).

  I think I checked everything starting from the turn of the firewall, open all ports, resettlement HPDM and install it on another machine.

  Any ideas how can I do Master repository works properly?

  Yes, as my co-woker mentioned above, your FTP repository has not been defined according to the configuration of your RCM.

  You must set the repository FTP at ftp: / / < IP > / HPDM based on the configuration of your RCM.

  Note: The 'Test' button will only check if the IP and port is available, which can mislead you when given the 'success '. We are looking to improve it in the next version.

• Repository working is not connect you but can connect you to master repository

  Hello

  Recently, my password to the connection diagram (master repository) database has expired. I refreshed the password. When I tested the link with the master repository it is connected successfully, but when I tested connection with referential work he demonstrated an error of invalid connection sawing repository.

  
  

  Please help me in this problem.
  

  
  

  
  

  ERROR:

  
  

  oracle.odi.core.config.WorkRepositoryResourceFailureException: ODI-10182: Uncategorized exception for access to the repository.

  Could not make JDBC connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused

  	at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:195)
  	at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:504)
  	to oracle.odi.core.OdiInstance. < init > (OdiInstance.java:581)
  	at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:521)
  	at com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.testConnection(SnpsDialogLoginDetail.java:755)
  	to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail.access$ 4 (SnpsDialogLoginDetail.java:743)
  	to com.sunopsis.graphical.dialog.SnpsDialogLoginDetail$ 2.performAction(SnpsDialogLoginDetail.java:288)
  	at oracle.odi.ui.framework.event.OdiActionListener.actionPerformed(OdiActionListener.java:69)
  	at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
  	in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2319)
  	at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
  	at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
  	at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
  	at java.awt.Component.processMouseEvent(Component.java:6288)
  	at javax.swing.JComponent.processMouseEvent(JComponent.java:3268)
  	at java.awt.Component.processEvent(Component.java:6053)
  	at java.awt.Container.processEvent(Container.java:2042)
  	at java.awt.Component.dispatchEventImpl(Component.java:4651)

  Do you use the same pattern to the work of master repositories &?

  If Yes, then you must change password in connection to the repository to work as well...

  Connect only to the master repository in ODI Studio.

  Go to the topology-> Repostiories-> repositories of work. Double-click repository work on you

  

  New window pop up on the right side. Click the card to change the password at reference work

  

• Agent is no t defined in the topology for master repository?

  Hello

  I created new Manager topology agent. I've updated the details of master repository in odiparams.bat

  Then, I started the officer in the command prompt.

  C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\bin > _name = odi_agent agent

  Then I am getting error like

  2015 08-04 ERROR ODI-1443 error 13:00:04.056 when starting agent: javax.servle

  t.ServletException: ODI-1405: Agent OracleDIAgent start failure: the agent is not

  t defined in the topology for master repository.

  After that, I started the agent in the master repository:

  C:\oracle\Middleware\Oracle_ODI1\oracledi\agent\bin

  And then I got error like below the screenshot

  

  Please help me. Please solve this problem. I tried so many times.

  Thanks in advance,

  A.Kavya.

  Hello

  Your agent starts successfully, but you are unable to test studio odi agent. Right?
  Then is your agent and odi studio are in the same host? If yes then you use localhost as a hostname in the topology Manager. You can try to use the Ip address or full host name in the topology for you Manager connect to the agent.
  You can also check ping and telnet to the port of the agent to check if it is blocked or not.

• When I connect to my master repository that I would be able to see all repositories of work associated

  Suppose a master repository has 3 repository work and every master repository and 3 repository work has different user credentials. SO, when I connect to my master repository I would be able to see all repositories of work associated with it?

  Yes, you can see the working repository as well as the user name used for this. Go to the topology and expand the repositories tab. Under working repository, you can all repositories. Double-click any of the repository and you would be able to see a Cap. If you hit it, you can see the details of the user.

  It is important you not only need to be connected with master only. You connect to repository work and check the same aswell.

  Thank you

  Chantal

• error when importing dump file

  Hi am error when you import the dump file

  C:\>impdp sms01/sms01
  
  Import: Release 11.2.0.1.0 - Production on Mon Jun 3 13:17:28 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  ORA-39006: internal error
  ORA-39068: invalid master table data in row with PROCESS_ORDER=-4
  ORA-01950: no privileges on tablespace 'USERS'
  
  ORA-39097: Data Pump job encountered unexpected error -1950

  DUMPFILE also happens to be an option for impdp. Probably not the best name for a directory object. That said, get rid of the semicolon at the end; Impdp is a command of the OS, not a SQL * Plus command.

• Get the error when importing topology, 11.3 to 11.5 ODI scenarios

  Hello
  
  Recently, I had installed ODI 11.1.5.
  Now, I'm importing topology and scenarios exported from my former ODI 11.1.3 via script shell on a Linux machine.
  There are about 25 topology and about 40 scenarios. When I run the script on these some topology and scenarios imported and the rest I get following error.
  Imported files are not persisted. Sometimes even any resulting file and when I run the next time the same file gives an error.
  
  oracle.odi.oditools.OdiToolException: this ODI tool must be connected to the repository but failed to connect to repository
  at oracle.odi.oditools.OdiAbstractToolRunner.executeCoreTool(OdiAbstractToolRunner.java:133)
  at oracle.odi.oditools.OdiAbstractToolRunner.executeTool(OdiAbstractToolRunner.java:47)
  at oracle.odi.ToolRunner.main(ToolRunner.java:75)
  Caused by: oracle.odi.core.config.MasterRepositoryResourceFailureException: org.springframework.jdbc.CannotGetJdbcConnectionException: could not make connection JDBC; nested exception is oracle.odi.jdbc.datasource.ConnectionTimeoutException: a timeout occurred while connecting to the database
  at oracle.odi.core.repository.Repository.getMasterRepository(Repository.java:79)
  at oracle.odi.core.OdiInstance.createMasterRepository(OdiInstance.java:491)
  to oracle.odi.core.OdiInstance. < init > (OdiInstance.java:544)
  at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:521)
  at oracle.odi.ToolRunner.initInstance(ToolRunner.java:36)
  at oracle.odi.oditools.OdiAbstractToolRunner.executeCoreTool(OdiAbstractToolRunner.java:128)
  ... 2 more
  Caused by: org.springframework.jdbc.CannotGetJdbcConnectionException: could not make connection JDBC; nested exception is oracle.odi.jdbc.datasource.ConnectionTimeoutException: a timeout occurred while connecting to the database
  at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:82)
  at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:524)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:588)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:613)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:645)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:111)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:121)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:136)
  to oracle.odi.core.repository.support.RepositoryUtils$ RepositoryInfoSource.loadRepositoryInfo (RepositoryUtils.java:180)
  at oracle.odi.core.repository.support.RepositoryUtils.loadMasterRepositoryInfo(RepositoryUtils.java:374)
  at oracle.odi.core.repository.Repository.getMasterRepository(Repository.java:77)
  at oracle.odi.core.OdiInstance.createMasterRepository(OdiInstance.java:492)
  ... 6 more
  Caused by: oracle.odi.jdbc.datasource.ConnectionTimeoutException: a timeout occurred while connecting to the database
  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:117)
  at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
  at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113)
  at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79)
  at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:524)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:588)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:613)
  at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:645)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:111)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:121)
  at org.springframework.jdbc.object.SqlQuery.execute(SqlQuery.java:136)
  to oracle.odi.core.repository.support.RepositoryUtils$ RepositoryInfoSource.loadRepositoryInfo (RepositoryUtils.java:180)
  at oracle.odi.core.repository.support.RepositoryUtils.loadMasterRepositoryInfo(RepositoryUtils.java:375)
  ... 8 more
  
  
  Please guide me in this regard.

  Ritika you should go for
  C:\Users\Current_User_name\AppData\Roaming\odi\oracledi

  In the oracledi folder, you will get the userpref.xml

  Thank you.