"regedit.exe find then unresponsive" when you search for an exe HKLM.

Original title: regedit.exe find then does not

When I open the registry by regedit and look for an exe with following HKLM, regedit.exe displays, "find next does not. When I search HKYCurrentUser or other registry keys for the same file, there is no problem. It's only the HKLM key which is not; the error says regedit.exe report crashes (uphang). Anyone has an idea why this occurs and how to troubleshoot and repair?

Hi ErhanKarabekir.

1. is the question confined with regedit only?
2 have had any changes made to the computer before the question?
Check out the following link and check:
How to configure Windows XP to start in a "clean boot" State
Note: Turn on the computer to start normally as described in the How to configure Windows to use a Normal startup state of the article.

Hope this information helps.

Tags: Windows

Similar Questions

  • When you search for available updates on the update site, I receive the 0x800A0046 error.

    HELP 0X800A0046

    How to ask a question
    http://support.Microsoft.com/kb/555375 >

    It helps those answering questions if you provide:

    What is your full version of windows (32-bit or 64-bit) and service pack level. (Right-click on my computer and select properties: Windows version which is displayed on the general tab that results (for example, Windows XP Professional Service Pack 1;)) Windows Vista Edition SP2 family)?

    You use what browser (exact version).

    What application anti-virus or security suite is installed and your current subscription?

    A 3rd party firewall is used instead the native Windows Firewall?

    What other software products anti-malware are installed and running?

    What updates you trying to install? (Number of KB)

    Please do it in your next reply.

    Information you provide will help someone to provide you with a relevant solution

    What are the causes of error 0x800a0046

    0x800a0046.html http://www.updatexp.com/>


    December 16, 2005 when looking for updates available on the update site, you receive the 0x800A0046 error.


    - -- ---

    February 7, 2006 error message when you visit the Windows Update Web site or the Microsoft Update Web site:




    July 2, 2010, you may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site


    In most situations where the automatic updates and the system restore does not work, the usual causes are installed antivirus\security suite or malware.

    run a CHKDSK followed by a defrag after anti-malware analysis good or two.

    I recommend to download and install MalwareBytes' anti-malware (MBAM) and SUPERAntiSpyware (SAS).

    Do a FULL scan with MalwareBytes' and SUPERAntiSpyware.







    UTC/GMT is 02:23 on Saturday, February 25, 2012

  • When you search for tickets on Ticketmaster, Firefox crashes at the time where it is 'research notes' and not progress.

    I'm working on a Mac with Lion. When I go to the website of Ticketmaster and the research to buy tickets, Firefox crashes on the page which States that "the search for tickets." I deleted my cookies, emptied my cache and reset Firefox disable plugins, but nothing has solved the problem. It occurs in SafeMode as well. I don't have this problem when using Safari or Google Chrome. Any help would be greatly appreciated.

    You are welcome

  • Inbox Outlook displays is not an email - that appear when you search for it?

    I found a message in my Inbox that does not appear as usual - that is to say he moved to 01:00 December 7, but she has not shown in the list. When I was looking for something else, he finds the mail - so he's here, but unless I search for it, I don't know it's there...   Only this single email affected I think - but I can't be sure unless I know why it does not show.

    Resolved - the mail went into the mail folder in bulk - I thought spam was the only file... my mistake.

  • Error code when you search for updates: ox80240010

    Hello.  I get the error message when you try to update.  My attention was drawn to it, but I am unable to do anything about it either - rpet error found: Code ox80240010.  Help please?

    Thank you

    0 x 80240010


    Update too deep to assess relationships have been assessed.

    Maybe try to reset WU as the error code above does not seem to be very useful.

    How to reset the Windows Update settings?

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • I have a problem with finding a PnP USB audio device when you search for available audio devices.


    I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.

    The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.

    1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.

    In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.

    If I reconnect it however a new USB port, the device is not found. This is not good.

    2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.

    "Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.

    I'm under labview 2012 on windows 7.

    I am running the application as an exe to build.

    I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.

    Is there a way to reset the information usb labview during execution?



    Hey Stephan.

    The sounds screws require a DLL located in:

    C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll

    Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:

    Dynamically that I can load and unload a DLL in LabVIEW?


    I would also recommend that you provide a Kudo to this idea:

    Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly


  • The name of the missing photo is missing in the upper part of the finder window, when you search for the missing photo.

    Until this version, the name of a missing photo was shown in the upper part of the finder window looking for the missing file. This was very helpful during the search, Miss me ;(


    Work on Mac OS 10.11?

    As it has nothing to do with the new version of Lightroom, this was changed in the new Mac OS.



  • When you search for a file from an application, I only see the folders and subfolders and impossible to open the folder to point to the files

    Windows 7 pro. When I need to make an application to a file, for example in Media dial 6 (video editing room) I open the browser and find the drive and folder the file is in, but I don't see the folder with a + extend next to him, if I develop I cannot see its subfolders, but can not see inside the folder to view the file. It must be a simple setting in windows that I can't work.  Any help would be appreciated.


    It look something like this picture below?  If so, the program is specifically asking you to choose a folder, not a file.  This could mean that the program will read all the files once you make your selection, and then offer another way to choose the particular file (such as a list in the library of the program or file display itself).

  • 310a can't find any SSID when it searches for network...

    I recently bought the 310a and increased throughout the game, but the printer won't find not all networks.  I went up to create a new network.  I have a Linksys router, not sure of the model, and it is established that the WPA system.  I am running Vista as my operating system.  It works fine when using the USB cable, but it is not the point of the printer.

    I need help, pointers or suggestions.  I tried to type in the SSID and password, I am tired of typing whenever I have try this again.  Thank you.

    I fixed my problem.  The printer automatically configure itself as a USB connection.  Go to control panel, printers and right click on your printer.  If it has you printer listed as USB, you need to add a port, make IP and give the IP address of the router/printer.

    Printer is not as easy to implement at home think.  Ran across this suggestion, surf the web for any Councillor.

  • The console of Windows Server Update Services (WSUS) falls down when you search for updates and displays the following error message:

    An unexpected error has occurred.
    Click the node server reset to try to connect to the server again

    Event type: error
    Event source: Windows Server Update Services
    Event category: no
    Event ID: 7053
    User: n/a
    Description: The WSUS administration console has encountered an unexpected error. Maybe it's a transient error; try to restart the administration console.
    This can happen if the application cache is damaged.


    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.


    See you soon.

  • Server not running message error message when you search for updates.

    I can't get Windows updates. I get a message server is not running. How can I solve this problem? I restarted my computer but no change in the message. Help, please!

    Hi John,.

    I only see the answer from here-


    Thank you.

  • Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

    'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, clear the search box, and then select

    DIAGNOSIS AND diagnostic USE information reports ▹ user

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

    When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

    As I suggested previously, conversion to a format like
    . WMV before you import it into Movie maker may be the solution.

    The free Converter from Microsoft can be a place to start:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
    (runs under WinXP SP3 / Vista / 7)

    When you install the program...
    Start Microsoft Expression Encoder 4
    (Start / programs / Microsoft Expression /)
    Microsoft Expression Encoder 4)

    On the "Load a new project" screen...
    Left click... "Transcoding project '...

    When the program opens, click on... File / import...

    (If at any time you get lost while browsing
    the program of... to... Window / active Reset
    Type or workspace... CTRL + SHIFT + R)

    Look for the file/s that you want to convert.
    (If files do not appear... open the fall
    window and choose... All files)

    Click (highlight) left the files and the left on the Open button.

    You can see the files in the "Multimedia content" pane

    In the right column... left click on the tab "Output"...

    Open the drop directory window and choose an output folder.
    (This is where you will find your converted file)

    On the left, click on the button "encode".

    Wait... video encoding CPU intensive and can
    be a slow process. It is always best if you do not have
    multi-task while files are encoded.

    Now... try import you again. File WMV in Movie Maker.

    More converters:

    There are to many converters available on the net...
    the following links are some examples. You can
    need to experiment to find the best result.

    Proceed at your own risk *.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    (1) format Factory (freeware)
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup270.zip<>
    (FWIW... installation..., you can uncheck
    'all' boxes on the last screen... even in this case, it may
    install the Ask toolbar on your system)
    (Windows XP / Vista / 7)

    First, you will need to decompress the file or just open the
    Drag FFSetup270.exe out of the folder
    and drop it on your desktop. To install left click.

    (2) Freemake Free Video Converter (freeware)
    (Windows XP / Vista / 7)

    (3) Koyotesoft Free Video Converter

    (4) Sothink Free Video Converter
    (Windows XP / Vista / 7)

    (5) hamster Free Video Converter
    http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
    (Windows XP, Vista, 7)
    (If you choose Custom Installation
    You can uncheck additional modules you
    do not want to install)

    (6) quick Media Converter
    (Win XP, Vista, Win 7 Home Premium)

    (7) SUPER © Simplified Universal Player Encoder & Renderer
    (the download mirror site is faster) (Windows XP / Vista / 7)

    (8) Xilisoft Video Converter
    (not freeware but receives good reviews)
    (Windows XP (SP2 or later) / Vista / 7)

    Good luck...

  • When you search our office location, 700 N. Pearl Street Dallas, Apple cards removes the PIN in a location 12 miles away.  How can this be corrected?

    When you search our office location, 700 N. Pearl Street Dallas, Apple cards removes the PIN in a location 12 miles away.  How can this be corrected?

    In the lower-right corner, click on the 'i' and select report a problem.

    It takes time, but the problem should be solved after as they verify the information.

  • I got aDossier on desktop disappeared and when I search for it. It happens on the network and I can't seem to him

    I got aDossier on desktop disappeared and when I search for it. It happens on the network and I can't help him


    1. Since when are you facing the issue?

    2 what you mean exactly by happens on a network and I can't seem to him?

    3. do you get an error message?

    4. are you connected to a network?

    5 did you a recent software or changes to the material on the computer?

    I would say first of all, allowing you to run the FIXIT from the link give and check if it helps.

    Diagnose and repair Windows files and folders problems automatically


    Hope this helps and provide us more information if you need more assistance.

Maybe you are looking for

  • GPIB PCI does not connect to agilent 35670 A * IDN? query does not

    Newbie here. I try to get the agilent 35670A to transfer data using labview with gpib problem lies in the fact that I can't start because my pci card does not recognize the agilent. Ive downloaded a driver ahead of the hand. measurement and Automatio

  • Application of password on the field not attached (Mac-based)

    Hi all I am currently faced with support of challenge, a small network with sbs 2011 in place.  All users are mac-based and therefore they interactively connect with domain name because it is not configured in this way.  Many of them work remotely an

  • Multimedia controller

    Put my hard drives in a t380d with an ASUS P4SD - LA motherboard. RELOADED XP Professional. The Device Manager shows yellow? in other devices and also multimedia controller. Show multimedia controller properties (this device is not configured correct

  • Notification icons

    The notification icon 'battery' in my laptop (Macbook Pro Vista) suddenly disappeared and I can't find a way through which I can restore. It is not even in the function "Customize notification icons... ». This coincided with the discovery that the ba

  • automatically installed service pack 2. Now explore products for windows and Microsoft office are not.

    Problems started after auto installed Vista Service Pack 2