Tecra S10-I can't boot from the battery alone

Similar Questions

• Satellite 5205-s705: How can I boot from the CD/DVD drive

  I can't run Setup from my cd/dvd rom, there is no such option in the BIOS Setup. How can I boot from the cD or DVD?
  Please, help me!

  Hello

  You are not able to boot from the CD/DVD drive?
  If you are unable to change the boot order in the BIOS, I would advise you by pressing the F12 key immediately after starting the laptop.
  A start menu should appear, then you should be able to choose the reader of CD/DVD (ODD).

  You can also try clicking on the C instead of the F12 button. The C button the STRANGE start.

  Check this back and forth!

  Good luck

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• can not boot from the CD

  I have a Dimension 8300 running XP Pro and I am trying to reformat the hard drive and reinstall XP.  I can't boot from the CD.  At startup after F12 and selected to boot from the CD, the sytem always starts on the hard drive. I changed the BIOS boot sequence, but still no luck.  The works of CD to read and write, but no boot from the OS disk.  Once the system boots from the hard drive I can start the CD of the OS that gives me the ability to reinstall XP, but no option to reformat.  My top disc is a DVD-ROM and the second disc is a CD - R.  I tried to boot from both drives, but the machine continues to boot from the hard drive.  Any suggestions?

  
  

• Can not boot from the CD to recover OS - Portege M200

  Hello

  I'm working on my Portege M200 friends that she bought used. Only, it came with an external USB CDROM drive and the laptop computer AC adapter. To make things better the HD is no longer recognized by the BIOS. I had a spare HD so I installed it and now the BIOS see the new HD, Yay!

  I also discovered that I could buy a replacement Toshiba system recovery CD, new Yay! But before I do that I wanted to make sure I could boot from the external CDROM drive. I plugged the CDROM drive and attempted to start on a spare windows xp CD. But it does not start on the CD. I made sure that the CD-rom drive has been first in the BIOS boot priority, but that doesn't seem to work.

  I read the other posts that mention the boot directly from the external CD-rom USB drive does not work and I have to boot to the CD-rom drive by plugging the CD-rom drive in a PCMCIA card. If I have to buy a PCMCIA card that has USB ports for connecting external USB CDROM drive in for I can boot from a CD?

  If there will be any brand/type of work? If this is not the case, what brand/type is known to work.
  Any advise will be greatly appreciated!

  BIOS of the portege recognise only a limited number of pcmcia-CD-disks

  in this thread you will find all the information you need:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=71179𑘋

  but your portege also boots most of the readers of usb_FDD; If you make a BACK-boot disk with the appropriate drivers for your CD-ROM usb drive you can use it without restrictions bios

  as you can read that this method will work only in a DOS environment, that is why it is absolutely necessary to format your hard drive to fat32, otherwise it will not be recognized

• Tecra M3 PTM30A will not boot from the cd to reinstall windows

  Hi all

  Totally new here and I have a question. I replaced the hard drive in the laptop, the old man died.
  I set the bios to boot from the cd. He reads the Windows XP cd for a minute then jump to trying to boot on the network adapter.

  Do I need to have the cd of recovery or must it be able to boot from a plain old XP cd?
  If it can boot from a normal cd is the stuffed ROM or am I missing something?

  Thanks in advance to anyone who can help you.

  Hello

  > I replaced the hard drive in the laptop, the old man died

  Your new hard drive is recognized by the Bios?

  > Do I need to have the cd of recovery or must it be able to boot from a plain old XP cd?

  You can use a recovery (if available) disk or Windows disk copy. In the Bios, you must set the Cd/DVD-ROM as 1st boot device and press F10 save and exit. Turn it back on. Thus, your computer you should start the installation of the Cd drive.

• A40-201: How can I boot from the CD?

  Hello

  Can someone tell me how I can configure this laptop to boot from the CD?
  I try to go into the bios, but this option is not available... I'm trying to press F12... but also unsuccefull...

  Tanks in advance...

  Hello

  -Put the CD in the drive.
  -Stop the laptop.
  -Then turn on the laptop and immediately the key C.
  Now, the laptop should boot from the CD.

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.

• Can not boot from the recovery disc - 0x000000D1 Driver_IRQL_not_less_or_Equal

  original title: cannot boot from the Vista recovery disc

  A real problem. Vista is prompting me to boot from my recovery disc and allow the repair of Windows. However, when I insert the disk it shows loading Windows, but once he starts to launch I get the BSOd with the "Driver_IRQL_not_less_or_Equal" error report with the error code Stop 0x000000D1. I searched on advice but all I can get into the repair mode, but I can't. F8 does not work in safe mode. Week last ChkDisc has run on every start and yesterday I received a number of parts of Vista won't load does not with error reports. Today, it started with Windows can not load the warning and instructions for use the recovery disk... I'm in a loop as I cannot cross the BSOD! Help please

  Mick

  Computers are strange animals. After my response to you, I had another attempt to go beyond the blue screen. Hey hop this time my computer decided that he had enough rest and proceeded without delay to start and I would like to action, the recovery disk. There then reinstall Windows Vista and am now to a new computer! It's time to move to Windows 7! The only thing I did yesterday was to unplug my printer to my laptop!

• Satellite A200 - 19L can not boot from the CD

  Hi guys,.

  I'm glad I found this forum site, I pretty well hope to find a solution here.

  Well, this problem is not very complicated, in fact my DVD player (model TS-L632) is not read more, so much so I decided to change with a new one, but it is not the same model as the original drive.
  It is the case of the generic DVD player really.

  Now when I inserted my recovery disk or any bootable disk is not booting the CD, and when I press F12 for I can't find any CD/DVD drive, but running in Windows I can't find the DVD player and it can read any CD priority boot normally.

  Just having the problem while booting from CD.
  I thought that maybe there is no security for this model that locked some hardware.
  So please guys want to help me how to understand it,

  any help would be greatly appreciated.

  Thank you

  > When I press F12 for boot priority I can't find any CD/DVD drive, but running in Windows I can find the DVD player and it can normally read any CD.

  The whole story seems really strange to me
  If you access the BIOS, you can see the details of the CD/DVD drive? The drive is recognized properly?

  If not then I guess that the STRANGE inserted is not totally compatible due to different master/slave/c-salt settings.

  > but running in Windows I can find the DVD player and it can normally read any CD
  It s also strange to me so that the CD/DVD drive appears in Device Manager even if the CD/DVD drive Startup menu option does not appear.

  But first check the BIOS

• Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

  Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
  If someone has the original settings, I would be grateful for any help.

  Derek has soon

  Hello Derek

  Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.

• Can not boot from the disk of my Satellite C

  1st I have a problem

  Windows Boot Manager
  Windows has encountered a problem communicating with a device connected to your computer.

  File:------Boot\BCD
  Status: 0xc00000e9
  Info: An unexpected I / 0 error

  To resolve this problem, I tried to install the Windows 8-64 bit (definitions of factory programs) - with the correct Toshiba drives, but after installation, that it took place...

  "reboot and select proper boot device or Insert Boot Media in selected boot device and press a key."

  I changed the boot disk priority, but it is still this bug.

  What model of laptop do you have exactly?

  Have you changed anything in the BIOS?

  The error message mentioned (reboot and select proper boot device) appear if the laptop can not find a boot device.
  Go into the BIOS and check if the HARD drive is set as first boot device.

  In addition, you should check if the HARD drive appears on the first page of the BIOS with all the details of the unit (size of the HARD drive, name).
  I guess this question could appear due to a malfunction of the HARD drive.

• Can not boot from the bootable media - Helix

  Hi all

  I have a Lenovo fan and I'm trying to install the OS using a Flash drive.

  When I go to the start menu BY pressing F12, I can see my flash drive in the list

  but when I select the flash drive to start, it will not forward that he will return to the same screen.

  I tried with different flash and drive both external readers. I also tried with external CD atmosphere with a bootable CD. but the problem is the same.

  the same flash drive works on another machine

  Please advise how this can be corrected.

  I found the resolution of my self.

  The tablets (Helix and even Microsoft Surface) does not support the NTFS file system on boot devices.

  I formatted the device in FAT32 and it works fine now.

  Thank you

• Satellite 1800 - can't boot from the recovery media

  My dvd/cd player works fine but satellite s1800-814 don't book from any bootable disk in windows xp / toshiba recovery disc etc.

  Have you tried the 'C' key during power?

  Try to reset the BIOS settings and make sure the BIOS is updated.

  Visit Toshiba to the latest BIOS.