Similar Questions

• exec_sql. PLL in the form of 11g

  Hi all

  I've struggled for some time with a form of migration problem.

  Reminder: My business is migrating to Oracle 10 g 11 g form through all the screens, libraries and all objects in general. A few days ago, I found a screen which opens a connection to the database and execute instructions (grant privileges, change password), this form uses exec_sql.pll which is apparently a package included in the implementation of forms since version 6.

  The problem begins when I took the current exec_sql.pll of my deposit and try to compile in Builder 11g.

  the main problem is that there is a function that does not compile:

  PACKAGE currconn BODY IS

  -This is the definition of package for currConn

  -For Developer/2000 R 2.x, which makes implementation of the STPROC. HSTDEF

  -procedure.

  FUNCTION get_curr_conn RETURN pls_integer

  IS

  hstdef PLS_INTEGER;

  BEGIN

  stproc.hstdef (hstdef); Obsolete in Forms11g - form of Oracle 11 g Migration

  connection_id: = EXEC_SQL. DEFAULT_CONNECTION;

  Tensioner: = EXEC_SQL.IS_CONNECTED;

  RETURN hstdef;

  EXCEPTION

  WHILE OTHERS THEN

  RETURNS A NULL VALUE.

  END;

  END currconn;

  According to the documentation of oracle forms, this guy here [stproc.hstdef] is now obsolete. Therefore, because that's why I can't continue with the compilation. the logic to connect to the DB and execute some instructions is present across several screens, so ideally, I would like to correct the root cause of which is the library and not apply with a workaround in each single fmb

  Issue.

  1. is there any place where I can download a newer version of exec_sql.pll?

  2. If the answer to #1 is NEGATIVE, is there another way to get around the above function?

  OK, time for me to chime...

  If you need not STPROC so it is not a problem because it no longer exists.  What you need to do, is not to use an old pll.  Since functions supported this old pll are now based in the forms, the library of the add-on should no longer be needed and your form should compile.  If it is not the case, your form code must be updated correctly.

  If your concern is that you have a lot of modules should be updated, you can use the JDAPI or CAPI to perform updates all modules quickly.

  If you do not correct the code at some point, you will continue to have this problem every time you upgrade.  What will happen when you need go to v12?

• Impossible to recompile the application Summit in the form of 11g

  Hi gurus,

  I try to install the application of top in the 11g version. Try to recompile all the objects (.pll, .mmb, .fmb) but all not able to compile .fmb.

  Here are the steps I did:

  1 extract the app from top to c:\summit

  2. create the schema of Summit by running the script

  3. set the FORMS_PATH registry and windows variables env FORMS_PATH to c:\summit

  4 compile the .pll, the .fmb and the .mmb

  Appreciate any help.

  Kind regards

  Ferrere

  I just tested this in forms 11.1.2.2 (x 64) and it works properly.  I am able to open all the files.  That said, if you do not correctly set FORMS_PATH, you will get an FRM-18108 error that says it cannot locate a required library.  It is expected, because the shape has a dependency on an OLB and therefore it must be included in FORMS_PATH.

  So, that means one of a few things:

  1. you do not actually use the version of forms, you believe that you are using

  2. you have multiple installed versions of forms and the system path points to a very old version of the constructor

  3. the error message you get is not one that suggests the form cannot be opened, but rather the one I mentioned above

  4. the file you download is somehow corrupted.

• Loading of the icons in the form of 11g

  Hi all

  I develop application using Oracle 11 g Forms.

  I'm loading the icons folder and configured in

  Registry.dat file located in

  %DOMAIN_HOME%\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.2\config\forms\registry\oracle\forms\registry.dat

  default.icons.IconPath = http:// hostname: porttypes/Icons /.

  default.icons.iconextension = gif

  It works very well...

  My question is

  The case above works in intranet systems.

  If I connect via static server ip, then, I need configuration c:\windows\system32\drivers\etc\host file

  Server_IP_Address nom_hote_serveur

  for each system.

  How to solve this problem?

  Thanks in advance,

  Su.GI

  Then default.icons.iconpath=/Icons/ or default.icons.iconpath=Icons/ should do the trick

  You can also check with a browser to see if it works http://hostname: port/forms/Icons/myicon.gif to see if the url matches.

  Jean-Yves

  must be default.icons.iconpath = Icons (relative way)

• The appearance has changed, and even the Start button is no longer a circle but the former rectangle that says start after the installation of an update.

  I recently installed an update of Windows for Vista.  The appearance has changed and even the Start button is no longer a circle but the former rectangle that says start.  How can I get the old look back with on the uninstallation of the update?  Thank you

  Original title: updates

  Hello

  It seems that the update was for graphics, as it changed the appearance

  If the update is the problem, you will need to remove it or download and reinstall the graphics driver from your computer or the manufacturer of the graphical Web site map.

  _________________________________________

  Read this information about updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• "ifsessid" parameter in the form 11g

  We are the migration of forms 10g to 11g.
  
  Our current configuration of 10g launches the form without the need of a browser using the runtime Java (JRE) environment.
  This is necessary because of the multitude of different browsers (and versions of browsers) in use in society. Although not officially sanctioned by Oracle, it has served us very well.
  
  The JNLP used with this 10g configuration contains the following line:
  
  * < param name = 'ServerURI"value =" / forms/lservlet? " ifcfs = / forms/frmservlet? config = XXX"/ > *.
  
  However less than 11g, two additional settings are necessary, which is the session ID.
  
  * < param name = 'ServerURI"value =" / forms/lservlet? " ifcfs = / forms/frmservlet? config = XXX & ifsessid = formsapp.888; acceptLanguage = en-US"/ > *.
  
  We have previously hard-coded this ID "888" session and even with multiple users running the application, everything seems OK, but I would like to be certain that this irreversible value does not problems.
  
  Questions:
  
  (1) what is the purpose of this parameter? (i.e. really serves to something)?
  (2) can this session ID be hardcoded (as in "888" in example)?
  
  
  The full article in the JNLP is as follows:
  
  < applet-desc
  hand-class = "oracle.forms.engine.Main";
  name = "XXXX11g (DEVELOPMENT)" "
  Width = "1000".
  height = "640" >
  < param name = 'ServerURI"value =" / forms/lservlet? " ifcfs = / forms/frmservlet? config = XXXX & ifsessid = formsapp.888; acceptLanguage = en-US"/ >
  < param name = "lookAndFeel" value = 'Oracle' / >
  < param name = "logo" value = "no" / >
  < param name = "colorscheme" value = "blue" / >
  < param name = "serverArgs" value = "" escapeParams = true module = XXXX_LOGON.fmx userid=aaa/bbb@foo usesdi = debug yes no = no buffer_records no = no debug_messages = no table no = no query_only = no = yes = no render peace "/ >"
  < / applet-desc >

  The ifsessid is not a "session id" in the traditional sense of the term. As I said, it is not used to maintain client-server session. It is partially used for your benefit (admin). It creates a separate newspaper marker if you have the ability to diagnose failures that find you in the log files. It gives you the capability of an entry in a log file by another in another newspaper. This can help to follow the path of a request may be taken before a failure occurred. Remember that it is not uncommon to see more than one of this value in your newspapers. This is because every time to start/stop WLS_FORMS, the sequencing of the ifsessid numbers will then leave at 1.

  So, if you change the ifsessid, the only thing you will break is your ability to easily follow a failure. It won't stop tracking you. It will be just as difficult as it was in previous versions.

• The upgrade of the Oracle Database 11g while maintaining the forms on 10g

  Hello
  I am relatively new to the oracle application servers and forms.
  
  In my view, it is possible to upgrade the database to 11g but let application servers and forms on 10g. I can't find it mentioned explicitly in documentation, but she seems to be involved.
  
  Someone at - it encountered problems with the database running on 11 g and leaving forms, application, the interfaces running on 10 g servers.
  
  Thank you
  Jim

  Salvation;

  Your question and answer is Yes,

  See the link below:
  http://www.Oracle.com/technetwork/middleware/IAS/downloads/as-certification-R2-101202-095871.html#BAJGCBEA

  Which is mention below notes:

  All editions of Oracle Database 11 g (11.1.0.6) or more are supported. Please refer to Metalink Note 740417.1 for more information on the Oracle Database 11 g 1 material Certification for Oracle Application Server 10 g (10.1.2.x), and Metalink Note 887365.1 for more information about the database Oracle 11 GR 2 Certification for Oracle Application Server 10 g (10.1.2.x).

  Respect of
  HELIOS

• The appeal of report on the menu (Oracle 11g form)

  I'm calling a report to a menu item in a menu (to which is attached a form) in Oracle Forms 11 g directly and I am having some trouble. I don't know how to call a report from a form and everything works perfectly.
  
  But since there is no element called 'Report' to attach as there are forms on a menu, I followed the route that is attached to the PL/SQL library "rp2rro" on the file menu (mmb) and I even made on the form itself. Then when you convert a menu by using the Migration Wizard of forms, he comment statements like "ADD_PARAMETER" and replace it with calls to procedures/functions bundled in the package "rp2rro". I put all the parameters
  
  RP2RRO. SETOTHERS ('PARAMFORM = YES');
  RP2RRO. SETDESTYPE ('CACHE');
  RP2RRO. SETDESFORMAT ('PDF');
  RP2RRO. SETCOMMUNICATIONMODE (SYNCHRONOUS);
  
  then made the call in the report:
  
  RP2RRO. RUN_PRODUCT (REPORTS, "MYREPORT', SYNCHRONOUS, DURATION, FILE system, param_list_id, NULL");
  
  but everything I get the error "FRM-41219: can not find the report: invalid ID."
  
  The Oracle documentation for integration forms reports is for when you run the report in a form not a menu item (to which is attached a form). Clues?
  
  My environment is:
  
  Oracle (database, Fusion Middleware) 11g - Red Hat Enterprise Linux 5
  Web browser - Internet Explorer 7 on Windows XP Professional
  
  Thank you

  See your forms/server/forms.conf file.
  It contains the virual directories:

  ...
  # Virtual path for runform.htm (used to run a form for testing purposes)
  AliasMatch ^ / forms/html / (. *) "C:\dev10gr2/tools/web/html/$1".
  ...

  You can use one of them, but also to add new example:
  # Virtual path documents
  AliasMatch ^ / forms/docs / (. *) "C:\.../docs/$1".

  You copy your html pages to the physical directory, then view with the following:

  Web.show_Document( '/forms/docs/my_page.html', '_blank');
  

  François

• How can I access the forms Wizard to split again if I made a mistake during installation?

  Specifically, I thought he solicited recipient of information but it was really ask what email I wanted the forms sent in so now it is configured to receive answers to one of my recipients. I use Windows 7 and Acrobat X.

  Okay, that's good. The e-mail address it uses may be changed here: Edit > preferences > identity > Email address

• Cannot open reports in the form of url using web.show_document

  Hi experts,

  I'm trying to access the oracle forms to oracle reports. port 9001 turn my forms and my report has been set up in port 9002.

  While trying to open the report using web.show_document (), the web page opens with the port 9001 and returns a 404 error. But when I change the port number 9002 in the url it opens the report sucessfully.

  Please find the link forms and reports below:

  http://10.180.218.158:9001/forms/frmservlet? config = kvb11g

  http://10.180.218.158:9002 / reports/rwservlet/getjobid97? Server = rptsvr_mohadam-in_adam2unst

  I tried to change the machine name of the ip address in theforms.conf and reports_ohs.conf as suggested in the link below. but it dint work out.

  URL-

  https://forums.Oracle.com/thread/1105289

  http://prasadmadhasi.com/2011/11/19/changing-presentation-services-port-number-in-OBIEE-11g/

  My reports_install.properties is given below,

  Properties of installation #Reports

  #Fri Oct 13 16:10:59 IST 2013

  WLS_USER = weblogic

  USE_REPORTS_BUILDER = true

  OHS_COMPONENT_NAME = ohs1

  REPORTS_MANAGED_WLS_PORT = 9002

  Server_name = RptSvr_MOHADAM-IN_adam2unst

  REPORTS_MANAGED_WLS_HOST = 10.180.218.158

  FORMS_CONFIGURED = true

  ORACLE_INSTANCE_NAME = adam2unst

  REPORTS_APP_DEPLOYMENT_DIR=C\:\\Oracle\\Middleware\\user_projects\\domains\\kvbdomain\\servers\\WLS_REPORTS\\tmp\\_WL_user\\reports_11.1.2\\uxabaw

  INPROCESS_SERVER_NAME = RptSvr_MOHADAM-IN_adam2unst

  MANAGED_SERVER_NAME = WLS_REPORTS

  OHS_PORT = 8891

  DOMAIN_HOME = it\: / Oracle/Middleware/user_projects/domains/kvbdomain

  COMMON_COMPONENTS_HOME = C\:\\Oracle\\MIDDLE~1\\ORACLE~1

  ORACLE_INSTANCE = C\:\\Oracle\\Middleware\\adam2inst

  REPORTS_APP_CONFIGURATION_DIR=C\:\\Oracle\\Middleware\\user_projects\\domains\\kvbdomain\\config\\fmwconfig\\servers\\WLS_REPORTS\\applications\\reports_11.1.2\\configuration

  OHS_HOST = MOHADAM - IN .in .oracle .com

  Domain_name = kvbdomain

  ORACLE_HOME = C\:\\Oracle\\Middleware\\Oracle_FRMHome

  USE_OID = false

  REPORTS_APP_VERSION = 11.1.2

  USE_SSL_FOR_APP_LDAP = false

  INSTALL_MODE = deployment

  SSO_CONFIGURED = false

  Looking forward for your help.

  Kind regards

  SYL

  Hello

  It's the forum space

  Developer SQL (not for general questions of SQL/PLSQL)

  Please mark this thread as answered and post your issue in the reports

  Concerning

  Marcus

• To migrate forms to 11.1.2 should we improve the forms to 10.1.2.3

  We have an application developed using Oracle Forms [32 bit] Version 10.1.2.0.2 (Production).
  
  We want to migrate/upgrade to forms [32 bit] Version 11.1.2.0.0 (Production).
  
  What is the process of migration of Forms 10 g 11g Forms?
  
  (1) use a batch script and compiled the 10g shape forms 11g using the 11 g compiler.
  (2) open the forms that gave errors when compiling batch in the form builder 11 g and compile the form in the form designer from 11 g to find errors, correct them, and compile the form and create fmx use of the generator of.
  
  Of after this document (http://docs.oracle.com/cd/E24269_01/doc.11120/e23975/upgrade_classic.htm) it is said, only under + "4.1 planning your upgrade to Oracle Forms and reports 11 g Release 2 (11.1.2)" + which you must patch and the last 10 g Release 2 game fixes which is 10 g Release 2 (10.1.2.3)
  
  Is this necessary?
  
  Also, what is the Assistant of the upgrade wizard for? Source and Destination must be in the same machine, it seems. But we were told that you can't install forms 11g and forms 10 g in the same machine?
  
  Published by: user12240205 on October 11, 2012 22:35
  
  Published by: user12240205 on October 11, 2012 22:36
  
  Published by: user12240205 on October 11, 2012 22:37

  This seems to be a common point of confusion. The "FMw Upgrade Assistant" is a utility that helps you to update any installation of the Application Server to a version more recent (for example 11.1.x). This has nothing to do with your forms (fmb, mmb, pll, etc.) or requests for reports (EPR, rdf, etc.). In General, I would say that using the AU is not necessary and probably shouldn't be used in most cases. Case where it should be used may include a situation where your previous version has been significantly customized and you don't know how or do not want to make the same customization in the new environment manually. If you are talking about a new product (Oracle or not) or even a new OS, generally your best bet is to start with a clean and new installation. Try to upgrade an existing version of always comes with problems. Notice of Just a man ;-)

  Regarding your requests for forms, there is a Migration Assistant (FMA) form, explained in the Guide to upgrade forms:

  http://docs.Oracle.com/CD/E24269_01/doc.11120/e24478/toc.htm

  That said, as with AU, it is always better to take extra time and do not rely on tools so they can be avoided. In most cases, the FMB will be unnecessary. This is especially true if your application has come to version 10. For older versions, using FMA could be beneficial.

  So, to the point, to move an application Forms (fmb, mmb, pll) version 10 or 11 is as simple as recompiling your modules by using the compiler v11. Is it ;-)

• Domain-username do not accept forms of Oracle installation

  Hello
  
  I have oracle 11g XE and that you have previously installed Jdeveloper, with weblogicserver
  
  Recently downloaded oracle forms and reports 11g r2. Had as much as the configuration of the process, but had then to cancel. Uninstalled forms but when install got again insofar as CREATE DOMAIN.
  
  Username: weblogic
  Domain name: classicdomain
  
  (Same as before)
  
  
  Then get error
  
  INST-07277: specified domain name is invalid or the location of field already has a field with the same name.
  Enter a valid domain name.
  
  Tried to change the user name, but still the same error. Installation guide looked but can't find the specifications.
  
  Any ideas anyone
  
  Thank you
  
  Tim

  Hi Tim,.

  It is pretty much clear that domain name what ever you created is already exists in the physical location.

  Please remove the complete directory called ClassicDomain with your % Middleware_Home % / user_projects / domains /.

  and try your Jdev field was created it will work.

  Otherwise, try to give the different domain name.

  Kind regards
  Kal

• Good way to start with learning the concepts of 11g

  Hello
  
  I have a work experience on the BEA weblogic server 8.1 sp4 on which I have worked for about 2 years now. My current mission requires work to Installation / development and deployment on the server of Fusion middleware 11g. Could some body if you please suggest me a good way to start with learning the concepts of 11g.
  
  I understand that all the documentation is available in the Oracle forum, but I want to know where to go.
  
  My essential tasks in the assignment would be
  1. installation (OSB on top of WLS).
  2 development/configuration on OSB.
  3 deployment and administrative tasks.
  
  Kind regards
  Angelique

  Some former OSB tutorials are mentioned here: Oracle OSB - tutorial for using Eclipse plugin development

  The development of OSB guide (which shows how to use Eclipse) can be found here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/toc.htm

  For now (to my knowledge), Eclipse is used for the development of OSB. Note that JDeveloper is used for development with the Oracle SOA Suite (for example Oracle BPEL).

• The former World Assembly references

  I created an instrument using NI-VISA driver, and I encountered an error trying to generate a help file for him.  I use c# in VS2008 with VISA 4.6.2 for the driver and file generator help (CodePlex) Sandcastle to generate a release build XML help file.  During construction, I get an "unresolved assembly reference: NationalInstruments.Common, version = 8.7.35.131'."

  The pilot refers to the assembly of the world (8.9.35.108) and the Assembly of NationalInstruments.Common (8.9.35.156); the common Assembly added automatically when I added the World Assembly.  The VISA feature is great - there seems to be no problem with these references.

  The error occurs whenever the manufacturer help try resembles the Assembly of the world (basically whenever there is a member that is accessible to the public of a world - as the Session type).  Using the libraries of reflection on the system I found that the version 8.9.35.108 of the Assembly of the world refers to the version of the common Assembly 8.7.35.131.

  I have attached a simplified example.

  I have confirmed the same behavior on another PC so I don't think it's my installation.  Is there a fix for this reference?  Alternatively, what version of NI-VISA contained the version 8.7.35.131 of the common Assembly?  Worst case, I can install this on my development PC just for builds to help.

  Thanks for your help!

  Hi strimble,

  National Instruments is based on Publisher policy files to redirect requests for NationalInstruments.Common to the latest version on the machine. The problem here is that Sandcastle does not respect these policy files, as shown here. I suggest you copy the former Assembly to your build machine, if you are able to find this on your development computer. If this is not the case, let me know and we can get for you to download.

• Cannot configure the fields to fill in Mode "to prepare the form." Please help :)

  Hello Adobe community.

  Here is a video link to explain my problem, there is also some text below explaining my problem too:

  Questions of implementation of the fields to fill in Adobe Acrobat.webm - Google Drive

  Last week I published a PDF file in Acrobat and added to fill fields... everything worked very well.

  This week, I'm doing the same thing.

  -J' open the PDF file in Adobe Acrobat (CC)

  -I'm going to "prepare the form."

  -J' I 'add a text field.

  * Now at this stage, everything worked fine. But now... I add the text field and I can't change it at all. I can't resize the text box, select it, nothing. I can even add a default in its properties, and nothing will be displayed. What is going on? I tried troubleshooting this online and I can't find an answer. In addition, I just did this last week, so I know it's possible lol.

  Any help would be greatly appreciated

  Levi Koenig

  It is a strange...

  First of all, thanks for the video, it's so much easier to understand what is happening when I see how things do not work.

  From what I see, I guess that it is something that is specific to this particular document. Have you tried to add form fields to a whole new document? You can do by ensuring that no other document is open in Acrobat, then Cmd-Shift-T to create a new document with a blank page in it. Now select Tools > prepared form - because this is a new document that was never recorded, Acrobat invites you to save it. Once registered, try to add a form field. It work? The form field is the way that you expect it to behave?

  If this isn't the case, then it is very likely that there is something wrong with the installation of Acrobat. The first thing I would try is to select help > check updates, make sure that you are running the latest version of Acrobat DC. If this does not help, I uninstall Acrobat and install again a new download. You can download Acrobat here: download Pro or Standard versions of Acrobat DC, XI or X

  If the problem is specific to your document, we will know why this is. It is possible that the document is corrupt. There are several ways you can try to recover from some alterations: the first thing I would try is to do a "save under" to save a new file name. Does it work or you get an error message? If you can save as a new file, the new file shows the same problems? If so, then try to extract just one page in a new document. To do this, open the thumbnail on the left, then select the page, right-click and select Extract page. This sill to create a new document with just one page in there, save it and try again.

  If you are still not able to add form fields that behave properly, it gets a bit more complex. How was the file created? Application used to create the original file and what application was used to save the file as a PDF file? Would you be able to share this file?