registration of dynamic events - FP not in memory?

Similar Questions

• With the help of registration of dynamic events for a Subvi

  Greetings to the forum LV,

  I'm having a problem with the inclusion of dynamic events in a Subvi and hope someone here can help you! Attached, is the culmination of many attempts to try to understand the inclusion of dynamic events. Basically what I'm trying to do with the screw joint is 1.) have a button that controls output PWM, 2). a speed selection menu that can enter 1 button said.) with an array of pwm values predefined; and finally, 3) to have some sort of event program which "connects" controls in 1). (and 2.) (IE, if I move the button to an exact value shown in the table, the speed selection must match this event). So far, I can say with certainty that the "speed selection" event card will not work because "New value" & "Old value" refer now to the refnum and not the selection of speed control (I intend to solve this problem after I solved this problem of the Subvi). However, the map of event engine speed PWM should work (when matches button among the values in the table, the selected speed will also report the "speed selection" control), which allowed me to reach my conclusion that the Subvi is not working.

  My reference to dynamic Subvi Event Registration: http://digital.ni.com/public.nsf/allkb/A882E27D1D7A949386256E0D0066B91A

  You need to make a different State for 'Timeout' in the Subvi and also avoid passing the value of timeout as -1.

  Find the file code.

• CompactRIO with dynamic event

  in my program, I have a struct event so when I amplant my VI in one NOR compactRIO his does not work and when I search for the resolution I found that I should use a dynamic event.

  my questions are:-in one compact RIO can I use dynamic event or not?

  -If so, how do dynamic events work? I need simple example

  Thank you

  I think in this document they meant "user events" not "dynamic events. If you look at the same page with the help of a newer version of LabVIEW, you will see that it is more clear now.

  Start by reading the user Network Interface (also the help of LabVIEW). Determine what type of data, you will need to send between the RT system and the user interface. Look at the examples for the mechanisms of communication in this document.

• Add more dynamic events registration refnum

  Hello

  I have a wire that passes Event Registration refnum to my structure of the event. This thread is from VI, that I don't want to touch. He spent recording for the cluster of user events.

  I would add more dynamic events to the refnum (but not to the cluster), so I would like to re-record with the addition of new events.

  When I'm passing this refnum to block 'Register for events', LabVIEW does not allow me to expand this block and add new events, which I think is understandable.

  How can I add more dynamic events to the refnum?

  Close, but no cigar.  When you add user events, you want to be sure that every event has a unique name, then name your constants defining the events differently (as shown here).

  

  Bob Schor

• Cancel the registration of events does not not to change value

  Cancel the registration of events does not seem to prevent the change in value of firing event.

  I've attached an example of change that disables the mouse enter and exit events to include the value Change event.

  Document ID 4ATCBP1U

  http://digital.NI.com/public.nsf/allkb/E3E5E1B3021D8EFA8625730A0062F52D

  You use the standard event, not the dynamic one (note that the Boolean value does not have the <> ).

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.

• Dynamic creation of buttons and events. Event was not working.

  Hi guys,.

  I am trying to create an application that will dynamically create buttons and events... Creating a button isn't a problem, but the event did not work. The code below is simple... 1. click on the button and it will create another button (dynamic)... If you click on the newly created button it should alert a test2...

  Anyone know how to implement this (which works )

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"> "
  < mx:Script >
  <! [CDATA]
  
  Mx.controls import. *;
  
  private void onLoad (): void
  {
  var btn:Button = null;
  //
  Test2();
  BTN = new Button();
  BTN.label = "test";
  btn.addEventListener ("click", test2);
  this.addChild (btn);
  }
  
  private void test2 (): void
  {
  Alert.Show ('test', 'test');
  }
  
  []] >
  < / mx:Script >
  < mx:HBox id = "testbox.foobar.com" x = "0" y = "154" width = "100%" >
  < mx:Button label = "click" = "onLoad()"; / >
  < / mx:HBox >
  
  < / mx:Application >

  Hi gretags,

  You forgot to specify the argument in the eventListener... that's why you are getting the runtime script error...

  Check the code below... Now the alert will appear...

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
     
                 
  Mx.controls import. *;
         
         
  private void onLoad (): void
  {
  var btn:Button = null;
  //
  Test2();
  BTN = new Button();
  BTN.label = "test";
  btn.addEventListener ("click", test2);
  this.addChild (btn);
  }
         
  private void test2(event:MouseEvent):void
  {
  Alert.Show ('test', 'test');
  }
         
         
  ]]>
      
     
         
     
     
  

  If this post answers your question or assistance, please mark it as such.

  Thank you

  Jean Claude Chari

• Dynamic subform does not arise after the registration and the opening.

  After that I have to fill out the pdf, save it, and open, the dynamic subform does not appear. There are currently 2 subforms that are controlled by checkboxes and function in the following way:

  -If the box "no" is checked, the subform "SubmissionNo" should appear, the subform "Submission" should be hidden, and the 'Yes' box should be unchecked

  -If the 'Yes' box is checked, the subform "Submission" should appear, the subform 'SubmissionNo' should be hidden and check 'no' must be deselected

  The two boxes to check by default being disabled and record properly, but after I close the pdf file and then to open it, the appropriate subform that should be displayed is still hidden despite the 'yes' or 'No' checkbox being checked.

  I have the following script in the docReady of SubmissionNo:

  if (noCheckBox.rawValue = 0) {

  This.Presence = 'visible ';

  }

  else {}

  This.Presence = 'hidden ';

  }

  and I have the following script in the docReady of presentation:

  if (yesCheckBox.rawValue=0) {

  This.Presence = 'visible ';

  }

  else {}

  This.Presence = 'hidden ';

  }

  Two things:

  Your if statements are not correct - you need two equal signs to test a value not one. So, If (noCheckBox.rawValue = 0) should be If (noCheckBox.rawValue == 0)

  In file > properties of the form on the Defaults tab make sure that 'keep changes scripts... ". "is set automatically on.

• Events unregistering on a cluster without Unregistering for all dynamic events

  Hello everyone

  I've been playing with dynamic event record but I hit a problem.

  Normally if I want to stop triggering events on a single control I will be wire constant ref with the correct type in the registry for block of events. This means that I don't have to use the unregister for events block and then rebuild the entire events list to registry when I only want to stop the events on a control.

  However, if I try to bring together a group of the refs (which cannot necessarily be of the same type) in a cluster then I can no longer cancel the events on this cluster registration from the register of events work a group of control constants.

  An alternative would be to use an array instead of a cluster, but this has two disadvantages: it does not create a case of dynamic event for each Member of the array and all controls must be the same type or they are co-erced to a more generic control class.

  I've attached an example VI (labVIEW 2011 SP1)

  I think I finally get the problem now.

  You need feed two references in separately.  You can cluster the registry OUT for events, I know, but I don't think that what you want will work.  You know that you can enter the tables in a table instead of a cluster, right?

  Shane.

  PS to be clearer.

  Register to activate your button separately from the rest.  Save all your "to be marketed" references - individually, not clustered - in a second 'register to events' and then together the two outputs (with the Save refnums event) before passing into the structure of the event.  You might have what you want.  So big cluster AFTER signing up, not before.

• Static vs dynamic events - dynamic events are empty

  During the implementation of my project, I used static events to manage the interface. The Structures of the event separated while loops in the same vi.

  I changed the architecture to make code modular and I use dynamic events. Dynamic events are captured in separate subVIs event Structures. I spend the references to the controls in the subVIs that have Structures of the event and I record the events of the references.

  Static events had no problem.

  With the dynamic events, I see that some events are not consumed. Instead, I see the event inspector window a few times an event is 'empty '. This means that the button should be pressed again.

  I am attaching two examples of projects that have exactly the same functionality.

  The testDemo2 uses dynamic events.

  The testDemo4 uses static events.

  How much detail I miss the dynamic architecture events leading to lose some events?

  This UI code is crizazy. It is difficult to really say what is happening, but you have a Unregister for events VI after the structure of your event to during each single loop and then re-register at the beginning of each loop. Empty all dynamic events currently in the queue and then re-registered again.

  You must only register events, only once and cancel the registration at the end of the application.

  What you do isn't really very modular. Even if you add a new event/control, you still he wire through the Subvi references and register, so you're not really save any time. There is nothing wrong with having a static event for your UI record. What you want probably is an architecture of messages in queue manager, where your static user interface events create messages that are sent to a loop of consumer to manage.

• It is back to LV2012 that the terminals of dynamic events are displayed by default?

  Between writing the title of this question and the drafting of this body, I realized my 'mistake' - which is between a function and a bug:

  If you drop a handler Structure in a given range from space empty diagram, the structure fell with the Terminal of dynamic events hidden.

  -but...

  If you drop a Structure of event handler in a range of context by right-clicking a user event Ref or event recording Refnum, the structure fell with this shown Terminal!

  Neat!

  To be more precise: the Structure of the event appears twice in the palettes.  One of the subpalette of Structures did not have terminal visible dynamic event, made one in the case of subpalette (which you can get by clicking right strategically).

• events triggering not on value change

  Is there a problem to have several event facilities in a VI that handle the same event? Specifically, I have a stacked sequence where in an image, there is an event loop (structure of the event in awhile put in loop) which manages the user interface buttons and closes the loop when met the correct conditions and then moves in another frame with another loop of events that handles the key events even in a manner slightly different and also some data acquisition view and generate files.

  I have attached a simplified version of VI that illustrates the problem. If the second event (in box 3) loop is activated, the RUN button are not managed in the first loop of the event. If the second loop of the event is disabled the button RUN are managed in the first loop of the event.

  This is something that can not simply to be chart labview? I'm more used to do this kind of programming in C or VB where the handler determines its behavior based on some global state variables and maybe I don't see how to achieve this easily in labview.

  I wouldn't the things sentence too strongly, as Dennis has, his points have merit.

  Your problem is with a parameter set to the value change event in the second structure (a checkbox in the dialog box), which tells the LV to lock the front until the end of the case of the event. Given that the occurrence is not complete (it doesn't even start), the FP remains locked and you can't do anything. The key here is understanding that registration for the event occurs as soon as the structure of the event between the VI is execution mode (simplification, here we just say the VI began to run) and from that point on the recorded events are queued, but you let run never really the structure of the event.

  The band-aid patch might be to uncheck the box for this option, but this isn't a good solution. A better solution would be to review your code in such a way that you don't have the event structures in order. There are many options for how you can do it. Here is one that is quite detailed - http://www.notatamelion.com/2015/02/23/building-a-proper-labview-state-machine-design-pattern-pt-1/

  In this one, you basically have a structure of the unique event and you react to events according to the State of the system.

• Unable to save my project. It says "not enough memory to process this command."

  It says "not enough memory to process this command" what should I do?

  Dictate the maximum size of your system
  resources and free space on the hard disk.

  As you have posted in a forum of Vista, I guess
  you are taking Vista Movie Maker 6?

  How much free space is available on your hard disk
  by car? And... What is the duration of your project?

  It is sometimes possible to publish / save in the
  Even if the DV - AVI format. WMV fails. If you are
  running Vista Movie Maker 6.see the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  WIndows Vista Movie Maker 6
  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  And sometimes unchecking that will enable all filters
  registration in progress...

  Reach... Tools / Options / compatibility... tab and
  Uncheck all filters / OK.

  The error that you received can be caused by the following:

  (1) source incompatible or damaged files (photos,
  video clips, audio clips).

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too big or too complex for your system
  resources. Made video is time CPU and
  can sometimes cause blackouts.

  The following items may be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

• Could not use the Brush tool because there is not enough memory (RAM)

  Hello, I found is a problem that I can not use the Brush tool error message could not use the Brush tool as there is not enough memory (RAM) I use photoshop cc here is my system information:

  Adobe Photoshop Version: 2015.1.1 20151209.r.327 2015/12 / 09:23:59:59 CL 1055659 x 64

  Operating system: Windows 64-bit 10

  Version: 10 or higher

  System architecture: Intel CPU Family: 6, model: 12 Stepping: 3 with MMX, SSE whole, FP SSE, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading

  Physical processor count: 4

  Number of logical processors: 8

  Processor speed: 2494 MHz

  Built-in memory: 16267 MB

  Free memory: 8727 MB

  Memory available to Photoshop: 14479 MB

  Memory used by Photoshop: 55%

  Range of modifier: enabled.

  Space design: disabled.

  Work plans: enabled.

  Multi-frequency 3D printing: disabled.

  HighBeam: enabled.

  Tile image size: 1024K

  Image cache level: 4

  Overview of fonts: medium

  TextComposer: Latin

  Display: 1

  Limits of the display: top = 0, left = 0, low = 1080, right = 1920

  OpenGL drawing: enabled.

  OpenGL allows old GPU: not detected.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  AIFCoreInitialized = 1

  AIFOGLInitialized = 1

  OGLContextCreated = 1

  NumGLGPUs = 1

  NumCLGPUs = 2

  glgpu [0]. GLVersion = "3.0".

  glgpu [0]. IsIntegratedGLGPU = 1

  glgpu [0]. GLMemoryMB = 2048

  glgpu [0]. GLName = "Intel(r) HD 4600 graphics card"

  glgpu [0]. GLVendor = "Intel."

  glgpu [0]. GLVendorID = 32902

  glgpu [0]. GLDriverVersion = "10.18.15.4256".

  glgpu [0]. GLRectTextureSize = 16384

  glgpu [0]. GLRenderer = "Intel(r) HD 4600 graphics card"

  glgpu [0]. GLRendererID = 1046

  glgpu [0]. HasGLNPOTSupport = 1

  glgpu [0]. GLDriver = "igdumdim64.dll, igd10iumd64.dll, igd10iumd64.dll, igd12umd64.dll, igdumdim3 2, igd10iumd32, igd10iumd32, igd12umd32.

  glgpu [0]. GLDriverDate = "20150717000000.000000 - 000.

  glgpu [0]. CanCompileProgramGLSL = 1

  glgpu [0]. GLFrameBufferOK = 1

  glgpu [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = ' 1.30 - Build 10.18.15.4256.

  glgpu [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] = [1447]

  glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [8]

  glgpu [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [192]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [32]

  glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [32]

  glgpu [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [4096]

  glgpu [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [4096]

  glgpu [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [64]

  glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [16]

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1

  glgpu [0] .extension [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1

  glgpu [0] .extension [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 0

  clgpu [0]. CLPlatformVersion = "1.2".

  clgpu [0]. CLDeviceVersion = "1.2".

  clgpu [0]. IsIntegratedCLGPU = 1

  clgpu [0]. CLMemoryMB = 1921

  clgpu [0]. CLName = "Intel(r) HD 4600 graphics card"

  clgpu [0]. CLVendor = "Intel(r) Corporation"

  clgpu [0]. CLVendorID = 32902

  clgpu [0]. CLDriverVersion = "10.18.15.4256".

  clgpu [0]. CUDASupported = 0

  clgpu [0]. CLBandwidth = 1.68648e + 010

  clgpu [0]. CLCompute = 134,55

  clgpu [1]. CLPlatformVersion = "1.2".

  clgpu [1]. CLDeviceVersion = 'CUDA 1.2.

  clgpu [1]. IsIntegratedCLGPU = 0

  clgpu [1]. CLMemoryMB = 4096

  clgpu [1]. CLName = 'GeForce GTX 850M.

  clgpu [1]. CLVendor = "NVIDIA Corporation".

  clgpu [1]. CLVendorID = 4318

  clgpu [1]. CLDriverVersion = "359.06.

  clgpu [1]. CUDASupported = 1

  clgpu [1]. CUDAVersion = "7.5.0.

  clgpu [1]. CLBandwidth = 2.97347e + 010

  clgpu [1]. CLCompute = 354.272

  Type of license: subscription

  Serial number: 90970505697637150612

  Feature::Photoshop / Extended: WE

  Feature::Photoshop/standard: WE

  Feature::Photoshop/test: OFF

  Feature:32 - Bit layers: WE

  Feature::CountTool: WE

  Feature::Acrobat3D: WE

  Feature::measurement: WE

  Feature::MATLAB: WE

  Feature::VanishingPointMeasurement: WE

  Feature::VanishingPoint3DSExport: WE

  Feature::VanishingPointDXFExport: WE

  Feature::DICOM: WE

  Feature::VideoLayers: WE

  Feature::Timeline: WE

  Feature::ExtendedMenuBar: WE

  Feature::3DPrint App: WE

  Feature::ImageStack creation: WE

  Feature::ImageStack edition: WE

  Feature:32 - Bit painting: WE

  Feature::ACRFilterAllowed: WE

  Feature::ACRFilterAvailable: WE

  Feature::ExportAssetsQueueFeature: OFF

  Feature::creative cloud staged: OFF

  Feature::3DMultitonePrinting: OFF

  Feature::artboards: WE

  Feature::Playground: OFF

  Feature::chording range: WE

  The application folder: G:\Program Files\Adobe\Adobe Photoshop CC 2015\

  Temporary file path: C:\Users\PADREM~1\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  G:\, 98.6 G, 13.3 G free

  F:\, 306.5 G, 15.6 G free

  E:\, 234.4 G, 20.7 free G

  Required plugins folder: G:\Program Files\Adobe\Adobe Photoshop CC 2015\Required\Plug-Ins\

  Main Plug-ins folder: G:\Program Files\Adobe\Adobe Photoshop CC 2015\Plug-ins\

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2015-09-09 at 18:52:48 79,567158 79.567158

  AdbePM.dll PatchMatch 0000-00-00-00: 00:00 1.  1.

  AdobeLinguistic.dll Adobe linguistic Library version 9.0.0

  AdobeOwl.dll Adobe Owl 5.2.9

  AdobePDFL.dll PDFL 2015/09/12-01: 10: 45 79,156620 79.156620

  Adobe AdobePIP.dll 7.3.1.70 product improvement program

  AdobeSVGAGM.dll AdobeSVGAGM 79.566705 79.566705

  AdobeXMP.dll Adobe XMP Core 2015/09/10-01: 10:20 79,158325 79.158325

  AdobeXMPFiles.dll Adobe XMP files 2015/09/10-01: 10:20 79,158325 79.158325

  Adobe XMP Script 2015/09/10-01: 10 AdobeXMPScript.dll: 20 79,158325 79.158325

  adobe_caps.dll Adobe CAPS 9,0,0,28

  AGM.dll AGM 2015-09-09 at 18:52:48 79,567158 79.567158

  ahclient.dll AdobeHelp Dynamic Link Library 2.0.0.2

  AIDE.dll HELP-2015/15/10-11: 58:31 79,568000 79.568000

  Amtlib.dll AMTLib (64 Bit) 9.0.0.89BuildVersion: 9.0; Brand: Tuesday, August 25, 2015 07:30:38) 1.000000

  ARE.dll ARE 2015-09-09 at 18:52:48 79,567158 79.567158

  Axe8sharedexpat.dll AXE8SharedExpat 2015/03/13-23: 40:54 79,562390 79.562390

  AXEDOMCore.dll AXEDOMCore 2015/03/13-23: 40:54 79,562390 79.562390

  Bib.dll BIB: 2015-09-09 at 18:52:48 79,567158 79.567158

  BIBUtils.dll BIBUtils: 2015-09-09 at 18:52:48 79,567158 79.567158

  boost_date_time.dll photoshopdva 8.0.0

  boost_signals.dll photoshopdva 8.0.0

  boost_system.dll photoshopdva 8.0.0

  boost_threads.dll photoshopdva 8.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.3.7.33275 2.3.7.33275

  Adobe CITThreading.dll CITThreading 2.3.7.33275 2.3.7.33275

  CoolType.dll CoolType 2015-09-09 at 18:52:48 79,567158 79.567158

  c:\windows\system32\dnssd.dll Hello 3,0,0,2

  dvaaudiodevice.dll photoshopdva 8.0.0

  dvacore.dll photoshopdva 8.0.0

  dvamarshal.dll photoshopdva 8.0.0

  dvamediatypes.dll photoshopdva 8.0.0

  dvametadata.dll photoshopdva 8.0.0

  dvametadataapi.dll photoshopdva 8.0.0

  dvametadataui.dll photoshopdva 8.0.0

  dvaplayer.dll photoshopdva 8.0.0

  dvatransport.dll photoshopdva 8.0.0

  dvaui.dll photoshopdva 8.0.0

  dvaunittesting.dll photoshopdva 8.0.0

  Dynamiclink.dll photoshopdva 8.0.0

  ExtendScript.dll ExtendScript 2015/04/17-16: 55.22 80.1017022 80.1017022

  icucnv40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  icudt40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  icuuc40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339

  igestep30.dll IGES 9.3.0.113 drive

  imslib.dll IMSLib DLL 9.0.1.14

  JP2KLib.dll JP2KLib 2015/08/14-01: 13: 58 79,258941 79.258941

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libiomp5md.dll Intel(r) OpenMP * Runtime Library 5.0

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  LogSession.dll LogSession 7.3.1.70

  Manta.dll Manta 1.  1.

  mediacoreif.dll photoshopdva 8.0.0

  MPS.dll MPS 2015/08/14-01: 13: 58 79,566687 79.566687

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CC 2015 16.1.1 Photoshop.dll

  Adobe Photoshop CC 2015 16.1.1 plugin.dll

  PlugPlugExternalObject.dll CEP PlugPlugExternalObject Dll (64-bit) 6.1.0 Standard Adobe

  PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (64 bit) 6.1.0.157

  PSArt.dll Adobe Photoshop CC 2015 16.1.1

  PSViews.dll Adobe Photoshop CC 2015 16.1.1

  SCCore.dll ScCore 2015/04/17-16: 55.22 80.1017022 80.1017022

  SVGRE.dll SVGRE 79.566690 79.566690

  svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  TBB.dll Intel Threading Building Blocks for Windows 4, 3, 2015, 0408

  tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 3, 2015, 0408

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll Adobe Updater Notifications Library 9.0.0.15 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 9.0.0.15

  VulcanControl.dll Vulcan Control Library 5.2.0.35 Application

  VulcanMessage5.dll Vulcan Message Library 5.2.0.35

  WRServices.dll WRServices Friday, July 31, 2015 07:50:10 build 0.21834 0,21834

  U3D writer 9.3.0.113 wu3d.dll

  Required plugins:

  3D Studio 16.1.1 (2015.1.1 x 001 003 x)

  Accented edges 16.1.1

  Adaptive wide-angle 16.1.1

  Angular Strokes 16.1.1

  Average 16.1.1 (2015.1.1 x 001 003 x)

  Bas-relief 16.1.1

  BMP 16.1.1

  Camera Raw 9.3.1

  Camera Raw Filter 9.3.1

  Chalk and charcoal 16.1.1

  16.1.1 charcoal

  Chrome 16.1.1

  16.1.1 Cineon (2015.1.1 x 001 003 x)

  Clouds 16.1.1 (2015.1.1 x 001 003 x)

  16.1.1 COLLADA (2015.1.1 x 001 003 x)

  Halftone color 16.1.1

  Color pencil 16.1.1

  CompuServe GIF 16.1.1

  Pencil tale 16.1.1

  Craquelure 16.1.1

  Crop and straighten Photos 16.1.1 (2015.1.1 x 001 003 x)

  Crop and straighten Photos filter 16.1.1

  Hatch: 16.1.1

  Crystallize 16.1.1

  Cutting 16.1.1

  Dark strokes 16.1.1

  16.1.1 deinterlacing

  DICOM 16.1.1

  Difference clouds 16.1.1 (2015.1.1 x 001 003 x)

  16.1.1 glow

  Move 16.1.1

  Dry brush 16.1.1

  Eazel acquire 16.1.1 (2015.1.1 x 001 003 x)

  16.1.1 entropy (2015.1.1 x 001 003 x)

  NO export VERSION color tables

  Extrude 16.1.1

  FastCore 16.1.1 routines (2015.1.1 x 001 003 x)

  16.1.1 fibers

  Film Grain 16.1.1

  Gallery of filters 16.1.1

  Flash 3D 16.1.1 (2015.1.1 x 001 003 x)

  Fresco 16.1.1

  16.1.1 glass

  Scarlet contours 16.1.1

  Google Earth 4 16.1.1 (2015.1.1 x 001 003 x)

  Grain 16.1.1

  Graphic pen 16.1.1

  Halftone Pattern 16.1.1

  HDRMergeUI 16.1.1

  HSB/HSL 16.1.1

  IFF Format 16.1.1

  16.1.1 IGES (2015.1.1 x 001 003 x)

  Outlines in ink 16.1.1

  JPEG 2000 16.1.1

  16.1.1 flattening coefficient (2015.1.1 x 001 003 x)

  Blur of the lens 16.1.1

  16.1.1 goal correction

  Lens Flare 16.1.1

  Liquefy 16.1.1

  Matlab 16.1.1 operation (2015.1.1 x 001 003 x)

  maximum 16.1.1 (2015.1.1 x 001 003 x)

  Mean 16.1.1 (2015.1.1 x 001 003 x)

  Measure Core 16.1.1 (2015.1.1 x 001 003 x)

  Median 16.1.1 (2015.1.1 x 001 003 x)

  Mezzotint 16.1.1

  Minimum 16.1.1 (2015.1.1 x 001 003 x)

  MMXCore Routines 16.1.1 (2015.1.1 x 001 003 x)

  16.1.1 mosaic tiles

  Multiprocessor support 16.1.1 (2015.1.1 x 001 003 x)

  Neon 16.1.1

  16.1.1 paper

  16.1.1 color NTSC (2015.1.1 x 001 003 x)

  Ocean Ripple 16.1.1

  OpenEXR 16.1.1

  Paint Daubs 16.1.1

  16.1.1 palette knife

  Patchwork 16.1.1

  Paths to Illustrator 16.1.1

  16.1.1 PCX (2015.1.1 x 001 003 x)

  Photocopy 16.1.1

  16.1.1 Photoshop 3D engine (2015.1.1 x 001 003 x)

  Photoshop Touch 14.0

  Photo filter package 16.1.1 (2015.1.1 x 001 003 x)

  Pinch 16.1.1

  Pixar 16.1.1 (2015.1.1 x 001 003 x)

  16.1.1 in plaster

  Plastic wrap 16.1.1

  16.1.1 PLY (2015.1.1 x 001 003 x)

  PNG 16.1.1

  16.1.1 pointillism

  16.1.1 polar coordinates

  Portable Bit map 16.1.1 (2015.1.1 x 001 003 x)

  Poster edges 16.1.1

  People's Republic of CHINA 16.1.1 (2015.1.1 x 001 003 x)

  Radial blur 16.1.1

  16.1.1 radiance (2015.1.1 x 001 003 x)

  16.1.1 range (2015.1.1 x 001 003 x)

  Color research grid NO VERSION rendering

  Crosslinking 16.1.1

  16.1.1 the ripple

  Rough Pastels 16.1.1

  Save for Web 16.1.1

  ScriptingSupport 16.1.1

  Shake Reduction 16.1.1

  16.1.1 shear

  16.1.1 asymmetry (2015.1.1 x 001 003 x)

  Smart Blur 16.1.1

  Smudge Stick 16.1.1

  Solarize 16.1.1 (2015.1.1 x 001 003 x)

  16.1.1 spaces

  16.1.1 splash

  Spherize 16.1.1

  16.1.1 sponge

  Sprayed strokes 16.1.1

  Stained glass 16.1.1

  16.1.1 stamp

  16.1.1 standard deviation (2015.1.1 x 001 003 x)

  STL 16.1.1 (2015.1.1 x 001 003 x)

  16.1.1 Sumi-e

  16.1.1 summation (2015.1.1 x 001 003 x)

  Targa 16.1.1

  16.1.1 texture veneer

  16.1.1 tiles

  Torn edges 16.1.1

  16.1.1 twirl watch

  16.1.1 U3D (2015.1.1 x 001 003 x)

  Draft 16.1.1

  Vanishing point 16.1.1

  16.1.1 variance (2015.1.1 x 001 003 x)

  Virtual Reality Modeling Language. VRML 16.1.1 (2015.1.1 x 001 003 x)

  Water paper 16.1.1

  Watercolor 16.1.1

  16.1.1 wave

  Wavefront | 16.1.1 OBJ (2015.1.1 x 001 003 x)

  WIA support 16.1.1 (2015.1.1 x 001 003 x)

  Wind 16.1.1

  Wireless Bitmap 16.1.1 (2015.1.1 x 001 003 x)

  Zig - zag 16.1.1

  Plug-ins option and the third: NONE

  Plug-ins that could not load: NONE

  Extensions:

  Recent files 1.0.0

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.ccx.start\index.html CC

  2.1.24 libraries

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.DesignLibraryPanel.html\index.html CC

  Beginning 1.0.0

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.ccx.start\index.html CC

  Adobe 6.1.0 color themes

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.KulerPanel.html\index.html CC

  Export as 2.4.0

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.webpa.crema\PSPanel\dialog.html CC

  Overview of the 1.1.3 device

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.preview\PSPanel\panel.html CC

  Share on Behance 3.0.0

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.behance.shareonbehance.html\index.html CC

  Export as 2.4.0

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.webpa.crema\PSPanel\dialog.html CC

  com.adobe.preview.Loader 1.1.3

  G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.preview\PSLoader\loader.html CC

  Install TWAIN devices: NONE

  Could you please rename the Photoshop CC 2015 preferences and try again.

  Please see the following article: preference file works, names, places | Photoshop CC 2014

• What does "after effects error: not enough memory to initialize PSL.» (83:: 8) "mean?

  So, about a week before I did a fresh 64-bit Windows 7 ultimate on a new PC and installation subscribed to the Adobe Creative Cloud, After Effects CS6 and Photoshop CS6 of Adobe Application Manager installation, then all updates made (and I just checked right now at 22:35 on 26 July, I have the latest version of everything).

  After effects was working at normal, and then later, I tried to import a .psd Photoshop and I got the error message:

  After effects error: not enough memory to initialize the PSL.

  (83: 8)

  Then After Effects crashed. So now he opens normally, but when I try to import a .psd or open an After Effects project registered an earlier version of After Effects (CS3 to CS5) I get the same error and an accident, every time.

  The research forums, I see people talking about this error when you import .psds in CS5, and they say that to get the latest updates solved the problem for them (which obviously cannot help me). I use all legitimate software on a computer brand new with 32 GB of RAM, who has passed all my tests of physical stress, so I know it's not hardware related.

  The only thing that I've seen people suggest is pressed Ctrl-Alt-shift to the launch of the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the old AE files. When I close After Effects and reopen it without hold down Ctrl-Alt-Shift keys, it goes immediately to crashing.

  Of course chip-* answer is ' then hold down Ctrl-Alt-Shift, dummy "and I'll do it for now, but is there any idea what is the problem?

  I feel like kind of a stupid because I decided to stop using my versions student software Adobe (I was not a student for about four years) and pay the full price for the composition of the cloud and the latest creative suite, and it is full of bugs.

  Hello

  If on the windows machine, make sure that the system temp/tmp environment variables point to % USERPROFILE%\AppData\Local\Temp, if it's in a different location, you will experience crashes in various programs of Production Premium (bridge, prelude), not able to import a psd in first or AE, photoshop gives a strange on swapfile error as it tries to open it on the root of C :.  You can run individual programs high, although will not work with dynamic link between programs like body/AE.

  It will be useful.