Registry onClick problem

could you please help me in this matter

nav bar has a button when click the button open a dialog box. threr are three buttons.

When I click a duty take this event and close the parent dialog box.

Implement the navigation bar

function buildNavbar (doc)

{

retrieve the object predefined navigation bar

the default type is "scriptui".

var bottombar = doc.navbars.filesystem.bottom;

Post it

bottombar. Visible = true;

adjust the height

bottombar. Height = 50;

Add a frame to display ScriptUI

bottombar.pathPanel = bottombar.add ('panel', undefined and 5.5 (480,35));  Bounds = [left, top, right, bottom]

Add user interface components to the frame

bottombar.pathPanel.browseField = bottombar.pathPanel.add ('statictext', [3, 3, 395, 22],' ');

bottombar.pathPanel.browseBtn = bottombar.pathPanel.add ("button", 400, 3, 465 (22) and 'Log In');

bottombar.pathPanel.browseField.text = doc.thumbnail.path;

Add the event handler of the button that navigates to the log in form

bottombar.pathPanel.browseBtn.onClick = function()

{

res = "dialog {------}.

Info: Panel {orientation: 'column', alignChildren: 'right', \}

text: 'Log in Info,------. "

name: group {orientation: 'row', \}

s: StaticText {text:'User ID: ""},

e: EditText {characters: 30}.

}, \

addr: group {orientation: 'row', \}

s: StaticText {text:' password:'}, \

e: EditText {characters: 30, properties: {noecho:true}}------}}

} \

}, \

buttons: group {orientation: 'row', \}

testBtn: button {text: 'Test'}, \

okBtn: button {text: 'OK', properties: {name: 'ok'}}, \

cancelBtn: button {text: 'Cancel', properties: {name: 'Cancel'}}.

} \

}";

win = new window (res);

Win.Center ();

Win.Show ();

$.writeln (win.info.name.e.text);

$.writeln (win.buttons.okBtn.text);

$.writeln (win.buttons.okBtn.properties.name.text);

Add the event handler of the button that navigates to the log in form

win.buttons.testBtn.onClick = function()

{

Alert ('here');

}

win.buttons.okBtn.onClick = function()

{

Alert ('here2');

}

}

}

Win.Show (); should be after the onClick events...

// Set up the navigation bar
function buildNavbar(doc){
        // retrieve the predefined NavBar object
        // the type defaults to "scriptui"
        var bottombar = doc.navbars.filesystem.bottom;
        // display it
        bottombar.visible = true;
        // set the height
        bottombar.height = 50;
        // add a ScriptUI display frame
        bottombar.pathPanel = bottombar.add( "panel", [5,5, 480,35], undefined);  // bounds = [left, top, right, bottom]
        // add UI components to the frame
        bottombar.pathPanel.browseField = bottombar.pathPanel.add( "statictext",[3, 3, 395, 22],"");
        bottombar.pathPanel.browseBtn = bottombar.pathPanel.add( "button",[400, 3, 465, 22],"Log In");
        bottombar.pathPanel.browseField.text = doc.thumbnail.path;
        // add the button's event handler, which navigates to the log in form
        bottombar.pathPanel.browseBtn.onClick = function(){
            res = "dialog { \
                info: Panel { orientation: 'column', alignChildren:'right', \
                                text: 'Log In Info', \
                                name: Group { orientation: 'row', \
                                                s: StaticText { text:'User ID:' }, \
                                                e: EditText { characters: 30 } \
                                            }, \
                                addr: Group { orientation: 'row', \
                                                s: StaticText { text:'Password:' }, \
                                                e: EditText { characters: 30, properties:{noecho:true}} \
                                            } \
                            }, \
                        buttons: Group { orientation: 'row', \
                                                  testBtn: Button { text:'Test' }, \
                                            okBtn: Button { text:'OK', properties:{name:'ok'} }, \
                                            cancelBtn: Button { text:'Cancel', properties:{name:'cancel'} } \
                                        } \
            }";
            win = new Window (res);
            //$.writeln( win.info.name.e.text);
            $.writeln( win.buttons.okBtn.text);
            $.writeln( win.buttons.okBtn.properties.name.text);
             // add the button's event handler, which navigates to the log in form
            win.buttons.testBtn.onClick = function(){
                alert('here');
            }
        win.buttons.okBtn.onClick = function(){
            win.close(0);
                alert('here2');
            }
         win.center();
        win.show();
        }
};
buildNavbar(app.documents[0]);

Tags: Bridge

Similar Questions

  • Registry update problem with the subset of the table replace

    Hi all

    I'm trying to make a graph of intensity which shows the voltage on each electrode in an array of 64-electrode (giving a grid of 8 x 8) and I'm running into some problems (probably because I'm pretty much a newbie of labview).

    To make this graph, I have a table 1 d with 64 elements, that I need to put in the right place on the graph, so that the chart reflect the actual disposal of the table.
    So I'm writing each of the 1 d array elements at a specific location in a 2D array. I use the function replace table subset and a shift to that register in a loop that has need of an iteration for each element/electrode. However, for some reason, the loop only runs once.

    I use a dummy much smaller range (9 items 1 d in a 3 x 3 array) to get this thing working in the joint, vi, but I guess that the principle should be the same.

    I don't know I'm missing something stupid enough, but I can't understand what

    Susan

    ETA: with how I define the axes x and y now, I suppose a table simple reshape could operate. But, unfortunately, the actual data are too messy for that.

    You have a table 1 d of 8 elements.  Then integrate you into a 2D array which has 8 columns 1 line.  Then you autoindex to the for loop that autoindexes in lines.  Since you have only 1 row, it will be only to go 1 time.

    Your Index table inside with the wired i until the index equals autoindexing.  Eliminate these tables to Index, eliminating the Build table goes from 1-D 2 - D.  Let the autoindex loop on the table 1 d.

  • I GOT A SPYWARE ALERT. IT IS SAID TO THE TRUSTSOLDIER REGISTRY. PROBLEM IS THAT IT REQUIRES A CREDIT CARD WHICH I DID NOT. WARNINGS KEEP APPEARING. I DON'T HAVE A CREDIT CARD. WHAT SHOULD I DO?

    I HAVE PROBLEMS WITH THE INSTALLATION OF A PROGRAM IN LINE-ANTISPY WARE CALLED "TRUSTSOLDIER. IT REQUIRES A CREDIT CARD WHICH I DON'T HAVE. THE ALERT CONTINUALLY APPEARS AND WILL NOT STOP. WHAT SHOULD I DO?

    It's probably a rogue security program that claims to find files infected your computer and try to make you pay for the program.  Don't do it!

    If you want to try to remove it yourself, first run a full scan with your antivirus program.  Next, download and run these programs:

    Microsoft Windows malicious software removal tool
       Malwarebytes' Anti-Malware

    For more detailed help, go on to Aumha.org malware removal forum, or check out the software and spyware removal guides malware to BleepingComputer.com .

  • bitmapbuttonfield onclick problem

    Hello everyone,

    I implement the audio recording and playback... in this record bitmapbutton will begin recording the first click (some change in bitmapbuttonfield as the change of background color) or change of bitmap in bitmapbuttonfield to indicate the first click, and stop recording on the second click on (to restore the previous bitmapbuttonfield onclick to indicate the second click)...

    How can I change bitmap in bitmapbuttonfield onclick...

    Please guide the procedure.

    If it's standard BitmapField, then changing the image Bitmap will work as shown in this example:

    http://supportforums.BlackBerry.com/T5/Java-development/show-focus-changes-using-BitmapField/Ta-p/44...

    This changes the Bitmap on Focus, but you can do the same thing during the processing of a click or clear.

    If you have created your own domain, then you will have to implement similar functionality.  How to do that depends on how you have set your field.  In most cases, it will be to change the bitmap that painted the paint routine, then by calling invalidate() to ensure that the system actually paint your field.

  • Registry-widget, problem of active States

    Hello, I have a question on le register widgets. Is it possible that the records are closed at the beginning? now the first tab is open? (see Sreenshot)


    Bildschirmfoto 2014-04-07 um 19.39.36.png

    Question: In the phone mode is shifted in the Overview page layout on the left and un menu appears which is not available in design mode?
    Third question: Le " States-active" in the menu items work correctly nich. Is not displayed as, for example, only when you scroll a minimum ...

    Link: http://mgneu.businesscatalyst.com/

    Thanks for help , Martin

    Hi Martin

    Answer your questions:

    -Yes, you can select to hide all initially for the compositions used on the page that allows you to hide all the targets initially, and the click of the mouse on action will appear targets.

    -Access to phone, please check for any empty object as rectangle, block of text along the left side of the page, the menu that is displayed can be master or place the far left of the page, try to remove that.

    -State assets enable for anchor links from the Site Properties > Content

    Thank you

    Sanjit

  • Cannot install Microsoft Streets & Trips with GPS 2011 error: your registry settings for this application were not copied correctly.

    Original title: Registry loading problem streets & trips

    I bought the MicroSoft Streets & Trips with GPS 2011 disc. After the loading and activation, I get the message "your registry settings for this application were not correctly copied. I uninstalled and reinstalled 3 times. I even thought that it might be a computer problem, so I bought a new computer, but same result. Should I simply a damaged drive? What is my solution?  Russ B, Mt Laurel NJ.

    Hello

    1. where did you buy the disc?

    I suggest you to send your request in the below link.

    Support for Microsoft Streets & Trips: http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

    Reference: http://www.Microsoft.com/streets/en-us/community-and-news.aspx

    Hope this information is useful.

  • Editing the registry disabled by the administrator.

    Original title: REGISTRY EDITTING PROBLEM

    So who to install a printer from the laptop comes up with a message... "' RESGISTRY EDITTING DISABLED BY THE ADMINISTRATOR"... Funny, but I thought that I was the owner / administrator of the laptop. How you enable the registry connected to this setting and why is he doing that. Not the 1 hard drive to do this and this message.

    Another message bothers me is "SPOOLER DOES NOT WORK"--managed to disable this message, but do not remember what it is I did. Now stuck with no printer and cannot download printer drivers...

    E-mail address is removed from the privacy * if you have any info on this two points.

    Another message bothers me is "SPOOLER DOES NOT WORK"--managed to disable this message, but do not remember what it is I did. Now stuck with no printer and cannot download printer drivers...

    http://social.technet.Microsoft.com/forums/Windows/en-us/391f3c57-5d2b-4E88-ADC6-190429a7fdbe/print-spool-service-not-running

  • Access denied - owner and/or setting permissions on the registry key

    I'm on a Windows 7 Home Premium system that has been upgraded from Vista.  Several weeks when you try to install Symantec Network Access Control, I came across problems where the facility would be restoring because of a registry access problem.  Since then, I have read and tried many fixes.  None have worked.  My current problem is that VCRedist_x64.exe also fails to install with registry access denied.  The steps I've tried among those in blog of Mark Michaelis.  This includes their achievement, safe mode.  I also have run the command secedit / configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose /areas REGKEYS.  Still can not work around the error.  The secedit journal includes some access denied errors for machine\software\microsoft.  Not sure how they relate.  I can find specify subkeys of the key / with Regedit who have the problem... but so far non of the suggestions to reset the ownership/permissions work.

    In advance... I appreciate the new thoughts and ideas to this problem.
    There must be a way to disable the security on the registry long enough to clean up this mess...

    You need to take ownership of the subkeys before you can change everything right of access!

  • 'Access denied' in ASA - registry permssion issue?

    Hi all

    We use version 9.3.1.
    All of the client machines are extremely locked in this environment and users have minimum rights.
    For example, they do not have access to the Control Panel, can not install software such as Winzip, etc., due to the strict policy of the company.
    Some users require that the console of ASA and the Financial Reporting Studio installed on their machines.
    The console and the studio were installed successfully by an administrator and the admin user can connect to both.
    However, when users log on to the PC and open the console of the AAS or studio EN they get an error "access denied". Users do not have access to Event Viewer, so I can not give more im afraid.
    I think that this error is caused by the fact that Hyperion tries to write to the user doesn't have access to a registry key.
    By default users have write access to HKEY_CURRENT_USER but do not have write access to the HKEY_LOCAL_MACHINE key.

    Now if I remember correctly one of the conditions is to have write access to the registry HKEY_LOCAL_MACHINE\Software\Hyperion Solutions key.
    I would like confirmation that this is the case. I had a look at the doc guides and admin install without success.

    I guess it's a registry problem since if I connect to a PC problem, I can open two heavy customers. The only difference between the profiles of users and mine, is that I have some admin rights on my roaming profile.

    Thanks for your help.
    SEB

    Hi Seb,

    I suspect it is a registry permissions problem.
    Service console Regional access lots of keys, in terms of updating and creation of key here is a few examples.

    Create the key > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DirectDraw\MostRecentApplication
    Set value > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DirectDraw\MostRecentApplication\Name
    Set value > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DirectDraw\MostRecentApplication\ID

    Create the key > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
    Create the key > HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Tcpip\Parameters

    Set value > HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\RNG\Seed

    A good test would download something like regmon, starts on a computer that receives questions and then start the console of Regional service, you should be able to see all of the attempts failed at the registry.

    I expect that Financial Reporting Studio written also in a number of keys as well.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Satellite Pro U300 - CD DRIVE NOT RECOGNIZED IN MY COMPUTER

    My cd/dvd drive is no longer recognized in my computer. It seems to be working, opens and closes and seeing little flashes when I put in a disc. but the disc does not load and the hard drive is not available in 'computer '.

    Ive tried the Device Manager. He comes in there, and ive done the scan for hardware changes and its still not to come. Ive also tried the microsoft help forum, and their suggestion didn't help either.

    Any ideas?

    > Ive tried Device Manager. He comes in there, and ive done the scan for hardware changes and its still not to come.
    Have you checked if the drive is listed in the BIOS?
    Check this please.

    I thought is might be only a registry key problem, but if the drive is not listed in Device Manager, if the BIOS does not recognize the CD/DVD drive, then a hardware malfunction could be possible

  • Fingerprint sensor & drive hardware failure on Tecra M9

    Fingerprints reader / sensor does not work.

    Two device drivers reported a device code 10 does not no error in Device Manager.
    In the fingerprint software, this fingerprint sensor reportss has reported a hardware failure. Code of 1066.

    Reinstalled drivers and software - problem remains the same.
    Used system restore and registry restored - problem remains.

    Is this a warranty issue - laptop is less than 1 months old.

    [email protected]

    Hello

    There is a new software of fingerprint on the Toshiba European driver page uninstall the old, clean the operating system using the CCleaner, reboot the laptop and try to install the new application downloaded from the page.

    If this doesn't help and if the error persists then a recovery disk can be useful

    Good luck!

  • Question about changing from Vista to XP on Satellite A200

    Hello

    5 months ago, I bought a laptop Satellite A200 - 1 M 5, but I face some strange and annoying inconsistencies such as blue screen after startup, inconsistencies with several programs or devices, unique discoveries registry keys, problem with microsoft register server, Mp telemetry and other inexplicable things that make you angry. In addition, Vista are so heavy for 'only' 1024 MB of memory.

    For all the foregoing, I thought strongly to change my operating system from Vista to XP clearer and more coherent. However, I have no idea if the machine will cooperate very well with XP. Nothing will work properly? Incompatibility? Someone told me that, perhaps, the case of Toshiba flash cards will not work. But, if so, how can I manipulate for example brightness? Combination of FN will work?

    Thanks in advance for the help

    I think that your machine should work well with Windows XP Home edition. Many people use Windows XP Home edition on the mobile phones of Satellite or Equium A200 new and different. Before you start to do the BIOS update to the version of Windows XP designed home. It must be 5. XX. Check it out!

    For the installation of WXP use CD Windows XP SP2 home edition installations. All the necessary drivers, tools and utilities that you can find on Toshiba page under http://eu.computers.toshiba-europe.com for assistance

    BTW: before you start checking some threads here about installation of WXP A200 laptop. You can find a lot of useful things.

    Bye and good luck!

  • Unsuccessful uninstall of Windows Live Essentials

    In a previous post, I mentioned that windows live essentials 2011, has been making my computer run in a blue screen. Now, I have learned that it is a registry related problem and tried to uninstall Windows Live Essentials 2011, to see if it makes a difference, but I could not uninstall! How can I get rid of these files (and registry entries) so that my computer runs normally again?

    Please report all further follow-up replies to your original thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/2ee79464-16a3-4d48-8c93-cdbc7e0cbf36

    Or you can find support for the installation/uninstall/upgrade to Windows Live Essentials 2011 in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Cannot install updates due to error code 0 x 80246008 and the BITS service is missing from the XP computer.

    Recently, I reloaded a fresh load XP on my laptop.  I was able to install SP3 and IE8, despite not being able to download them directly from the Windows Update site.  I tried several times to install updates, one, five and all at the same time and is unable to install.  I ran Fixit to many times and it says it solves some problems, but no single instance doesn't solve all of them.  I also tried to update after the launch of a clean boot, always to nothing does not.  I see many solutions on this and other Microsoft sites and I tried, but nothing seems to change the results.  FixIt has reported the following:

    -------------------------------------------------------------------------------------------------------------------------------------

    Details of the update of Windows editor

    Problems found
    Registration for the service is missing or corruptService registration is missing or damaged do not fixed
    Sign up for the service Reset Succeeded
     
    Problems installing recent updatesProblems recent updates installation not fixed
    Fix Windows Update succeeded
     
    Problems installing recent updatesProblems recent updates installation not fixed
    Fix Windows Update succeeded
     
    Check verrouillesfichiers missing or damaged missing or corrupt files fixed
    Repair missing or corrupt files Succeeded
     
    Windows Update, error 0x8024402C (2013-11-28-T-09_56_27A) 0x8024402C(2013-11-28-T-09_56_27A) of fixed Windows Update error
    Reset Windows Update of the data store Succeeded
     
    Verified issues
    Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
    Some security settings are missing or have been changedSome security settings are missing or changed Checked
    Key of registry corrupt Patch registry Patch keysCorrupt
    Detects the hotfix or corrupt cache Checked
    Windows Update services aren't runningWindows update services do not run checked
    Encryption services components are not the registeredCryptographic service components are not registered Checked

    Problems found details

    Registration for the service is missing or damaged do not fixed
     
    Sign up for the service Reset Succeeded
     
     
    Recent updates installation problems not fixed
     
    Fix Windows Update succeeded
     
     
    Recent updates installation problems not fixed
     
    Fix Windows Update succeeded

    Check missing or corrupt files fixed
     
    Repair missing or corrupt files Succeeded
     
     
    Windows Update error 0x8024402C(2013-11-28-T-09_56_27A) fixed
     
    Reset Windows Update of the data store Succeeded

    Issues checked the details of the detection

    6 environment variables Windows Update are incorrect Checked
     
    Restore the Windows Update environment variables is not running
     
     
    Some security settings are missing or changed Checked
     
    Reset the security settings is not running
     
     
    Key of registry corrupt Patch Checked
     
    Detects the cache fix corrupted or missing
    Fix registry patch not working
     
    Fix registry patch problems
     
    Windows Update services do not run checked
     
    Required for Windows Update registry files works not
     
     
    Encryption services components are not registered Checked
     
    Save the cryptographic components not working

    Details of detection

    The service status

    ---------------------------------------------------------------------------------------------------------------

    Can someone point me in the right direction to solve this problem?

    Thank you.

    Original title: Windows Update will not install on the new load XP

    Hi all

    Thanks for your replies.  Sorry I didn't answer sooner, but he got late last night, and I got to reregister the Qmgr.dll and Qmgrprxy.dll BITS files.

    I clicked Start, click on run and typed the command following, and then click OK:

    Start, run and in the run box, Type regsvr32 qmgr.dll, click OK.
    Start, run and in the run box, Type regsvr32 qmgrprxy.dll, click OK.

    I was then able to start the updates.  There are 124 updates, the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86.  He downloaded 124 updates, but even once asked me to insert the disc for qmgr.dll when he was installing the 10th update.  I find the qmgr.dll file again and pressed OK, but it seems to hang forever and do nothing, then I simply cancelled updates and closed during the night.  I have been relieved to have solved the problem of BITS, but is concerned by the hang up on the tenth update installation and he called again for the qmgr.dll file during the installation of updates.

    This morning, when I rebooted, it installed some updates at startup, and I restarted again.  He then held I first install the .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 to date.  N BITS issue for that.  It took time, but completed settle.  Restart again and now there are only 21 updates to high priority required.  My guess is that he downloaded all 124 updates last night, but when I cancelled the installation after hanging on #10, he just started to install it again this morning and did so successfully.

    However, when I try to install the 21 remaining, he has not once again, and I find that the BITS service is not in the services again.  After I have re-enter the BITS service and restart it, the downloads are working again.

    I am now what I may need to reinsert and restart the BITS service whenever I need to download an update.

    Ideas, suggestions or comments?  I am slowly solve problems and if I persist, I can get this all taken care.

    Hi Dan,.

    From what you wrote, I understand where you are getting confused. Here are the steps to follow to solve this problem.

    Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

    Research should show this file in the following locations:

    C:\Windows\System32
    C:\WINDOWS\ServicePackFiles\i386
    C:\WINDOWS\system32\bits

    I hope they are all present, follow these steps to register the service.

    Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK
    (If you do not have the command run in the start menu, hit the Windows key + R, instead)

    Do the same with this file: regsvr32 qmgrprxy.dll and then restart.

    Here are the next steps.

    Copy / paste this command in the field to run, and then click OK
    %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

    Windows will launch a dialog box asking you to insert the Windows installation CD. Ignore this and change the way downstairs to C:\WINDOWS\ServicePackFiles\i386

    The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

    Then restart the PC again and continue with the rest of the troubleshooting steps.

    Click on start, run and copy/paste the following and click OK: services.msc

    You should now be able to see the Background Intelligent Transfer Service, or just "BITS" displayed in the list of Services.

    Double click it to open BITS and then click on the Start button. This is just a test to make sure that it works correctly.

    If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
    Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

    Restart then try and start the BITS.

    If you get the same error again, copy / paste the following text in the field run and click OK:
    Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

    Reboot once more and then try and start the BITS.

    Let me know how you please.

  • Publish with the installation of Windows updates.

    do a clean reinstall of windows xp. Im running a Dell Dimension 2400 with a Celeron CPU 2 .4GHz and 1.99 GB of ram that I loaded sp3 and net framework 3.5, I could update twice that the update said I had about 130 updates but it installed only about 100 and was stranded on the rest, I tried every fix I could find and nothing worked Im adding a fix auto repoet...

    Details of the update of Windows editor

    Problems found
    Registration for the service is missing or corruptService registration is missing or damaged do not fixed
    Sign up for the service Reset Succeeded
     
    Problems installing recent updatesProblems recent updates installation not fixed
    Fix Windows Update succeeded
     
    Problems installing recent updatesProblems recent updates installation not fixed
    Fix Windows Update succeeded
     
    Check verrouillesfichiers missing or damaged missing or corrupt files fixed
    Missing or corrupted files repair not run
     
    Windows Update, error 0x800B0100 (2013-12-03-T-01_59_03P) 0x800B0100(2013-12-03-T-01_59_03P) of fixed Windows Update error
    Reset Windows Update of the data store Succeeded
     
    Encryption services components are not the registeredCryptographic service components are not registered fixed
    Save the components of CSP Succeeded
     
    Verified issues
    Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
    Some security settings are missing or have been changedSome security settings are missing or changed Checked
    Key of registry corrupt Patch registry Patch keysCorrupt
    Detects the hotfix or corrupt cache Checked
    Windows Update services aren't runningWindows update services do not run checked

    Problems found details

    6 registration for the Service is missing or damaged do not fixed
     
    Sign up for the service Reset Succeeded
     
     
    6 problems to install recent updates not fixed
     
    Fix Windows Update succeeded
     
     
    6 problems to install recent updates not fixed
     
    Fix Windows Update succeeded
     
     
    6 control missing or corrupt files fixed
     
    Missing or corrupted files repair not run
     
     
    6 Windows Update error 0x800B0100(2013-12-03-T-01_59_03P) fixed
     
    Reset Windows Update of the data store Succeeded
     
     
    6 encryption services components are not registered fixed
     
    Save the components of CSP Succeeded

    Issues checked the details of the detection

    6 environment variables Windows Update are incorrect Checked
     
    Restore the Windows Update environment variables is not running
     
     
    6 some security settings are missing or changed Checked
     
    Reset the security settings is not running
     
     
    6 keys to corrupt the registry Patch checked
     
    Detects the cache fix corrupted or missing
    Fix registry patch not working
     
    Fix registry patch problems
     
    6 Windows Update services do not run checked
     
    Required for Windows Update registry files works not

    Details of detection

    The service status

    --------------------------------------------------------------------------------
    $PropName: $Value
    $PropName: $Value

    Collection information
    Computer name: NUM1UAFAN
    Windows Version: 5.1
    Architecture: x 86
    Time: 13:58:07 03/12/2013

    Publisher details

    Windows Update
    Find and fix problems with Windows Update
    Package Version: 8.1.2.20131119
    Publisher: Microsoft Corporation

    Follow the procedure in Xircal here to the letter

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-Updates-site-hangs/c83bb8d9-7e3f-40E0-b985-4d0ada0b54e5

    Although addendum notes below that it connects to an update of specific cumulative security for which there is a new version from his original position.

    I spent more than a day of reloading of a system by various methods every time with the same results as you find you, even the same error code.

    You can find the BITS service, replaced by another with a name of garbage, just follow his process as it repairs. I don't have the last registry fix.

Maybe you are looking for