Reinstall after PC crash

Similar Questions

• Authentic DVD 6 of Lightroom with productkey. Impossible to reinstall after pc crash. Message: non-genuine software. How can I reinstall?

  Authentic DVD 6 of Lightroom with productkey. Impossible to reinstall after pc crash. Message: non-genuine software. How can I reinstall?

  Hi johans.

  Please see warning: 'Adobe Genuine Software Validation failure... '. » | Windows

  Similar thread for reference get the error message "Adobe genuine software verification failure" of my own drive. Please advise.

  Kind regards

  Assani

• Reinstall after windows crash

  Hi, hope you can help again. 8.1 Windows crashed (conflict between the firewall and anti-virus), only solved by a new installation of 8.1 which resulted in all programs being deleted, nothing new here. Reinstalled to 13 items and now you want to restore the catalog. The photos were on a separate, as the backup hard drive. Do I have to transfer all the photos again? Is there an easier way using the restore? I don't want to replace what I have, what restoration seems to be. I have a full backup and 5 incremental backups, which I first?

  It's a good thing, I'm retired, as it looks like a busy week!

  PS should I upgrade to Windows 10, or it would cause more problems?

  John

  johnhh39 wrote:

  Hi, hope you can help again. 8.1 Windows crashed (conflict between the firewall and anti-virus), only solved by a new installation of 8.1 which resulted in all programs being deleted, nothing new here. Reinstalled to 13 items and now you want to restore the catalog. The photos were on a separate, as the backup hard drive. Do I have to transfer all the photos again? Is there an easier way using the restore? I don't want to replace what I have, what restoration seems to be. I have a full backup and 5 incremental backups, which I first?

  John, I understand that you have all your multimedia files on an external drive and your different backups also on an external drive. It doesn't matter if it is on the same drive external or not.

  You don't say where was the folder in your catalog, in the office or in an external drive.

  Suppose that the catalog was already on an external drive. It should work immediately without any intervention on your part. The only thing to check is that the external drive with the media always has the same drive letter.

  If the catalog folder on the default location on the C: drive (which seems to be the case), he lost.

  But...

  Since you have incremental backups, the last of them contains a catalog.buc in its folder. It's a copy renamed your catalog at the time of this incremental backup. This gives you a quick way to recover most of your organization on that date.

  -Create a folder somewhere (in office or the external drive). Copy the catalog.buc in this new folder. Rename the file to "catalog.pse13db". Start the organizer with a double click on this file. Unfortunately, you may lose your faces or places of marking, but your keywords, captions, categories, notes, albums, batteries and sets version should be there. Remember that move a catalog folder does not change its content, without loss of links.

  If you want to restore from the incremental backup to return everything, always start by the last increment and follow the instructions.

  You can restore to a new location of main folder if you have enough space. It's way more accurate and safe to pick up everything.

  If you choose to restore to the same location, pay attention to the warnings various any crash or skip existing files; In my view, there is a possibility to ignore existing files, but I had the opportunity to test only recently.

• How can I get Thunderbird for me to choose the SMTP that IMAP when reinstalling after a system crash?

  I had a crash of the system Jan. After the crash recovery (Windows had written on some parts of the disc but recovered most of the things, however, they were put to the States as if they had just been installed), Thunderbird did something I've been unhappy with & I reinstalled it. When I did it I did not select IPOP or IMAP but come with IMAP, I had never used before and knew nothing of. However, now after reading about IMAP & have consumed with Comcast, I don't like it intensely - it is slow and cumbersome and cannot me save emails with all the parts for them permanently. I did have the time to continue so far. How can I return to the use of IPOP?

  POP and IMAP are the two inbound messaging protocols.
  SMTP is the outgoing mail protocol.

  Maybe when Apple invents its own protocol of e-mail it will be iPOP as all other iSomethings

  Here are the instructions for switching to Thunderbird from IMAP to pop...

  https://support.Mozilla.org/en-us/KB/FAQ-changing-IMAP-POP

• Need to reinstall acrobat after computer crash

  Need to reinstall acrobat after computer crash

  Hello

  Could you please specify the version of Acrobat, you need so that we can guide you and provide you with the link to download Acrobat.

  I am also you provide the links to download Acrobat DC (perpetual as well as of the subscription), XI Acrobat, Acrobat X, Acrobat 9 and 8.

  Where these meet your requirement, please read the following.

  For subscription Acrobat DC: https://helpx.adobe.com/acrobat/kb/acrobat-dc-downloads.html

  See the following for the rest of them:download Acrobat products | Standard, Pro | DC, XI, X

  To download Acrobat 9 or 8, link mentioned on the right side of the second link.

  Concerning

  Sukrit diallo

• Problem installing Photoshop CS6 after computer crash.

  I bought the CS6 extended in 2012 and have been using it regularly.  Then, in the month of August, I had to reinstall after a computer crash.  For the last 30 days, when you use the softward. I was doing a popup that asks for my serial number, then it says serial number is good, but there is no such software in my computer.  Then a popup is offered which tells me to choose the appropriate program.  Photoshop CS6 is one of the choices, but not Photoshop CS6 extended.  The "test" of 30 days has expired, and now I'm locked out of Photoshop CS6 extended.

  I searched high and low on the forums but cannot find a solution.

  Can someone please help with this?  Photoshop is one of my most used tools.

  Thank you.

  James Wheeler

  is your ext cs6 and upgrade from a previous version?

• How to automatically restore the session after a crash/update / without asking me if I want to restore it?

  Hello, there are times that my Firefox crashes (well, it happens to all of us who use it to some extent) or updates asking to restart. I would like to know if there is an option that allows you to restore the previous session automatically without asking me even. It would be very useful for reasons. I had this kind of problem a couple of times ending me be upset. Sometimes I misclicked and lost all my important tabs. Other times my firefox has crashed/shifted on after reboot and guess what sound restart still has not even asking me if I wanted to restore my session crashed.

  Thank you in advance.

  Cesarius Hi, I think I understand, but I have not explained completely.

  The browser.sessionstore.max_resumed_crashes preference is to avoid an infinite loop. The default value 1 means an attempt to restore the session automatically once and if it fails (for example, it crashes before it can finish to restore), then display the "embarrassing". You could try to increase the value of 2 or 3 and see if it works on the second or third time. If you still see the screen "This is awkward" after a crash, Firefox still does not make a failback.

  You can also check if there is a file user.js in your profile folder. A user.js file is a file of optional parameters that Firefox reads at startup and uses to override the settings saved in your previous session. Unless you create a user.js file yourself, you can usually just remove it. This article includes a section on the hunt for a possible user.js file: How to fix preferences that will not save.

  Note: by default, Windows hides the .js file extension. Precise work with file names, I suggest setting windows to show all file extensions. This article has the steps: https://www.mozilla.org/firefox/all/

• After a crash of the system Windows, Thunderbird displays only about half of my gmail folders (labels).

  In my email account, I use a number of folders to organize my e-mail messages. After a crash of the system Windows, Thunderbird restarted, but now I see about half of my files and cannot access a large number of messages filed away. They always appear when I use my browser to access the gmail account, so the labels are still there. How can I repair damaged files thunderbird/arrangements? I use the current version (31.4.0)

  AHA! It already showed that I have subscribed to all of the folders, visible and missing, but after a combination of clicks (not sure what sequence of refreshment and subscribe and OK), they are all back.

  Thank you! Very useful.

• How to enable automatic session restore after a crash

  I'm trying to enable automatic session restore after a crash. I put browser.sessionstore.resume_from_crash to true, but it is false. Is there is a dependency on another parameter that is the cause of return? Or other means to enable automatic crash recovery?

  The option 'When Firefox starts' is set to ' show my windows and tabs from last time '. I'm not under any session management extensions.

  All browser.sessionstore settings have default values except these:
  Browser.sessionstore.max_tabs_undo: 500
  Browser.sessionstore.max_windows_undo: 100
  Browser.sessionstore.restore_hidden_tabs: true
  Browser.sessionstore.resume_from_crash: false

  Thank you!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

• How to stop Firefox 18 to restore the previous Session after a Crash

  Firefox 18.0.1 running on Windows 7

  When Firefox crashes, the next time it opens it tries to restore the previous session. I don't want Firefox to restore the previous session after a crash. How can I stop Firefox restore the previous session after an accident?

  Please note:
  1 - my homepage is set to 'white page '.
  2. I configured Firefox does NOT remember my browsing history, download history, form fields, and passwords.
  3 - even in Safe Mode (with all disabled add-ons), Firefox ALWAYS restores the previous session after a crash.

  Thanks a lot for your help. I hope that my vote immerses you in the category "TOP 9".

• Svchost.exe is free running and leaves multiple windows open all gel. Re-loaded windows XP after a crash with original rescue records.

  Original title: Windows XP - free race - is lost.

  Just re - load windows XP after a crash with original rescue discs, svchost.exe is free running and leaves several Windows Open gel, all on and offline. Any ideas? I ran ms-fixit beta for all listed. I also disabled Norton and now use Windows Defender, still no luck.

  Hi MarkBerri,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Svchost.exe is a process name generic host for services that run from dynamic link (dll) libraries. The Svchost.exe file is located in the folder C:\Windows\System32. At startup, Svchost.exe checks the registry services part in order to build a list of services that it needs to load. Multiple instances of Svchost.exe can run at the same time. Each Svchost.exe session can contain a grouping of services. Therefore, separate services can run, depending on how and where Svchost.exe is started. This grouping of services enabling better control and easier debugging.

  Svchost.exe groups are identified in the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Svchost

  You can run the auditor of system files on the computer.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• reproduce the error login name and after application crash

  Hello

  I have attached the code that generates the duplicate connection name error and after they crash the application.

  Note :-in app when you press tab 3 at that point they extract data and once you press tab 3 then app crash,.

  So please update me as soon as possible.

  Thank you

  Umang.

  Still awaiting response that you will find attached code or I also include the code here

  QML

  // Default empty project template
  import bb.cascades 1.0
  
  TabbedPane {
      id: tabMeniuNavigation
  
      //showTabsOnActionBar: true
      Tab {
          title: qsTr("All")
          id: tab1
          Page {
              Container {
                  // define tab content here
                  Label {
                      text: qsTr("Tab1")
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle {
                          base: SystemDefaults.TextStyles.TitleText
                      }
                  }
              }
          }
      }
      Tab {
          id: tab2
          title: qsTr("Tab2")
          Page {
              Container {
                  // define tab content here
                  Label {
                      text: qsTr("Tab2")
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle {
                          base: SystemDefaults.TextStyles.TitleText
                      }
                  }
              }
          }
      }
      Tab {
          id: tab3
          title: qsTr("Tab3")
          content: Page {
              Container {
                  ListView {
                      objectName: "otherNoteListView"
                  } // ListView
              }
          }
          onTriggered: {
              app.medicialListData();
          }
      }
      Tab {
          id: tab4
          title: qsTr("Tab4")
          Page {
              Container {
                  // define tab content here
                  Label {
                      text: qsTr("Tab 4")
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle {
                          base: SystemDefaults.TextStyles.TitleText
                      }
                  }
              }
          }
      }
      Tab {
          id: tab5
          title: qsTr("Tab5")
          Page {
              Container {
                  // define tab content here
                  Label {
                      text: qsTr("Tab5")
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle {
                          base: SystemDefaults.TextStyles.TitleText
                      }
                  }
              }
          }
      }
      onCreationCompleted: {
          // this slot is called when declarative scene is created
          // write post creation initialization here
          console.log("TabbedPane - onCreationCompleted()")
  
          // enable layout to adapt to the device rotation
          // don't forget to enable screen rotation in bar-bescriptor.xml (Application->Orientation->Auto-orient)
          OrientationSupport.supportedDisplayOrientation = SupportedDisplayOrientation.All;
      }
  }
  

  CPP

  // Default empty project template
  
  #include "FindMedicin.hpp"
  #include "customListMedicinitemfactory.h"
  
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  using namespace bb::data;
  
  FindMedicin::FindMedicin(bb::cascades::Application *app) :
          QObject(app) {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      qml->setContextProperty("app", this);
  
      // create root object for the UI
      root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  }
  
  FindMedicin::~FindMedicin() {
  
      QSqlDatabase::removeDatabase(mDbNameWithPath);
      delete medicinListView;
      model->registerUserData();
  
  }
  
  QString FindMedicin::copyFileToDataFolder(const QString fileName) {
      // Since we need read and write access to the file, it has
      // to be moved to a folder where we have access to it. First,
      // we check if the file already exists (previously copied).
      QString dataFolder = QDir::homePath();
      QString newFileName = dataFolder + "/" + fileName;
      QFile newFile(newFileName);
  
      if (!newFile.exists()) {
          // If the file is not already in the data folder, we copy it from the
          // assets folder (read only) to the data folder (read and write).
          QString appFolder(QDir::homePath());
          appFolder.chop(4);
          QString originalFileName = appFolder + "app/native/assets/" + fileName;
          QFile originalFile(originalFileName);
  
          if (originalFile.exists()) {
              // Create sub folders if any creates the SQL folder for a file path like e.g. sql/quotesdb
              QFileInfo fileInfo(newFileName);
              QDir().mkpath(fileInfo.dir().path());
  
              if (!originalFile.copy(newFileName)) {
                  qDebug() << "Failed to copy file to path: " << newFileName;
              }
          } else {
              qDebug() << "Failed to copy file data base file does not exists.";
          }
      }
  
      return newFileName;
  }
  
  //Find Pharama
  void FindMedicin::medicialListData() {
      CustomListMedicinItemFactory *otherNoteItemFactory =
              new CustomListMedicinItemFactory();
      qDebug() << "MediaList Data Called.";
  
      // create a data model with sorting keys for firstname and lastname
      model = new GroupDataModel(QStringList() << "field1");
  
      mDbNameWithPath = copyFileToDataFolder("sql/FindMedicin.db");
  
      // load the sql data from contacts table
      SqlDataAccess sda(mDbNameWithPath);
  
      //sda = new SqlDataAccess(mDbNameWithPath, this);
      if (sda.hasError()) {
          DataAccessError err = sda.error();
          //DataAccessError* err = sda.error();
          qWarning() << "SQL error: type=" << err.errorType() << ": "
                  << err.errorMessage();
  
      }
      QVariant list = sda.execute("select * from medicin_detail");
      // add the data to the model
      qDebug() << list.value();
      model->setGrouping(ItemGrouping::None);
      model->insertList(list.value());
      // create a ListView control and add the model to the list
      medicinListView = root->findChild("otherNoteListView");
      medicinListView->setObjectName("");
      medicinListView->setDataModel(model);
      medicinListView->setListItemProvider(otherNoteItemFactory);
  }
  

  more code as an attachment.

• First and After Effects crashed. Uninstalled is not for them. Use the cleaning tool. I deleted everything else. Tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  Hello team,

  First and After Effects crashed.

  I tried to uninstall the utility (Mac OS). Uninstalled is not for them (which has worked for other applications).

  I used the cleaning tool. It seems to work, but the uninstaller for first and AE in the utility remained.

  I deleted everything I found CC remaining manually.

  I tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

  I don't know what to do anymore.

  Could someone help me?

  Virginia

  I got the help of Adobe support, they sent me another link to download Adobe App Mgr It was apparently a network problem but, and it was resolved after a few re-tent.

• How RAC doesn't lose data after a crash of the Forum?

  I am a student at the exam 1Z0-432 (Oracle RAC 12 c Essentials) and I was wondering how RAC loses no data after a crash?

  I see that the data is updated in the Cache buffers (Global Cache), the redo data is written to log buffer, then the redo log files. If each instance has its own wire recovery and undo tablespace how other instances of know these data so immediately after a commit an instance goes down?

  Suppose we have a hardware failure and the scott user updated a line on my racdb2 of the instance and issues a commit, immediately after that the racdb2 instance crashes. Redo data are already in the newspapers of recovery, but not in data files, how the other racdb1 of the Forum know about this update?

  Is there a Buffer any Global redo?

  Kind regards

  Franky

  The reason for newspapers to restore an instance available to all other nodes in CARS.  When one of the instance crashes, surviving instances can access the content instance redolog crashed and apply the changes to recovery.

  http://oracleinaction.com/instance-recovery-RAC/

  http://logicalread.SolarWinds.com/how-Oracle-RAC-redo-and-rollback-are-managed-mc04/#.VaUXqvlViko

• After the crash of my mac, I'm PC

  After the crash of my mac (HS) I under of went P, but I have not disabled the license installed on the mac photoshop.

  Today I need install photoshop (CS6 for MAC version in the format box with serial number photoshop RET).

  Is this possible and how?

  Thanks in advance

  you will need to exchange your version of mac for a pc version and you will need the version number of pc: a product of Adobe for another language or version of trading platform