Reinstalling software after windows recovery

Similar Questions

• How is - a reinstall CS6 after a recovery of factory default?

  How is - a reinstall CS6 after a recovery of factory default?

  If you encounter a problem by reinstalling, run the cleaner, http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• After Windows Recovery virus, all programs, folders, and documents are hidden

  Hey there. I think I just cleaned my old machine to windows XP from a virus apparently known as Windows Recovery using software Malwarebytes' Anti Malware. I have two questions:
  1. How can I be sure that I deleted everything about the virus?
  2. the virus seems to have converted all my documents, files and programs to the State that is 'hidden '. Here is what happened: at his first connection after removing all the stuff found virus, all items in my office were missing from the office, and no program was included in the area of all programs on the start menu. I did a few fishermen and found that all of my programs and documents are in fact still on the computer, but they just seem to be have a "hidden" attribute So I changed my settings folder options to "show the hidden files and folders" and now I see all my old files on my desktop and files, but they are all gray. If I right click on any file or folder, then click Properties, it still shows that specific file as 'hidden '. This attribute at this level then really UN-hides compensation file. How can I apply this to all files and folders instead of each individually?

  In addition, I still don't see any programs in the field of all programs on the start menu. I must go to c:\Program Files and navigate so (unless I have a shortcut on the desktop or the start menu). No idea how to get my programs listed in the programs area all over again?

  Hi Lea4Stas,

  Try the method of register: listed @ http://www.softwaretipsandtricks.com/forum/windows-xp/37769-unable-unhide-see-hidden-folders.html

  You must copy under settings (in) - in Notepad and click Save as "restore.reg" in quotes.

  ----------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder\Hidden]
  'Text"="@shell32.dll,-30499 '.
  'Type '=' group '.
  "Bitmap" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f
  00,74,------.
  00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 00, 33, 32.
  00, 5 C, 00, 53, 00,------.
  48,00,45,00, 4 c, 00, 4 c, 33, 00, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00.
  2 C, 34, 00, 00, 00,------.
  00
  "HelpID"="shell.hlp #51131.

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder\Hidden\NOHIDDEN]
  "RegPath"="Software\\Microsoft\\Windows\\CurrentVersion\\Explorer\\Advanced."
  'Text"="@shell32.dll,-30501 '.
  'Type '=' radio '.
  "CheckedValue" =: 00000002
  "ValueName"="Hidden".
  "DefaultValue" =: 00000002
  "HKeyRoot" = dword:80000001
  "HelpID"="shell.hlp #51104.

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced\Folder\Hidden\SHOWALL]
  "RegPath"="Software\\Microsoft\\Windows\\CurrentVersion\\Explorer\\Advanced."
  'Text"="@shell32.dll,-30500 '.
  'Type '=' radio '.
  "CheckedValue" = DWORD: 00000001
  "ValueName"="Hidden".
  "DefaultValue" =: 00000002
  "HKeyRoot" = dword:80000001
  "HelpID"="shell.hlp #51105.

  -----------------------------------

  I hope this helps.

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• Reinstall the original software after Windows 10 update

  When I bought my HPE-180 t, it came with Adobe products already installed as part of the package I bought.  After the Windows 10 update, it became necessary to reinstall Adobe first Elements 8 and she asks a code that did not come with disks. What should I do?

  Windows 10 normally do that unless the application is too old.  Adobe Elements 8 first seems to be 2009, well before 10 Windows.  You may need to get a newer version.

• Express Media Player stopped working after Windows recovery with partition

  Hi people

  I'm new to this forum. We hope to get some tips on your part I recently got a laptop A100. It comes with the Media of Express Player (EMP) installed. Given that my HARD drive is 160 GB, I need to make a few partition to protect my data should WinXP crashes and needed recovery. I used Toshiba Windows restore CD to restore windows to a 40 GB partition and set up the other as an extended partition. This is the final State of my laptop after that.
  C: 40GB (contains WinXP)
  D: ~ 108 GB (for my data)
  I can see an unknown partition of ~ 250 MB, which is for EMP. I turned off my PC and turn it on using the button of the EMP. It did not work! EMP does not start. Can you guys advise? Anyone tried the partition their HARD drive and for the EMP to work?

  Hello

  Usually, if you want to use the functions of player Media Express that the Mediaplayer Express Recovery CD should be performed before performing recovery of recovery, DVD-ROM.

  You know you can't run Express Media player after performing a recovery!

  But it seems that you have not formatted the disk around and packed only the extra partition. Eventually, you n t need to reinstall the drive Media Express.

  I studied a little more on the technical knowledge of Toshiba and found this:

  In rare cases, Windows XP starts instead of the Media Express Player
  http://support.toshiba-tro.de/KB0/TSB6B01N70015R01.htm

• Cannot install driver vga after windows recovery

  I have an acer aspire 5520g.

  For a long time, I was unable to install any except the generic vga driver.

  Now, I used the recovery tools to reset the computer to factory settings. When you try to get into windows for the first time, I get a message of 'windows install' the pc restarted unexpectedly or encountered an error. This time after the installation.

  I found that I can use 'SHIFT F10' to open a line of cmd, and there use devmgmt.msc to access Device Manager, where I find that the only missing factor is my vga driver.

  No matter which driver, I'm trying to update the standard / driver nvidia it generates a message: Windows found the driversoftware, but an error has occurred when trying to install, this devcice is incorrectly (code 1) configured.

  I found that some drivers for all devices can be installed, same removal work already pilot will result in not being able to reinstall the driver again.

  I hope someone can help, provide more information of system if necessary.

  Hello

  you used the Recovery Manager Acer reinstall vista

  It's their process non-microsoft

  drivers should be installed during the recovery process

  For more information contact Acer;

  http://support.Acer.com/us/en/default.aspx

• Reinstalling software touchsmart/Windows 7

  TouchSmart 520-1050, oem Windows 7 Home Premium, 64-bit; installation program is on the D partition.  I had my TouchSmart for about 2 years and that you have reinstalled Windows 7 a couple of times. I need to reinstall Windows 7 new and, as in the past, want to do it from the D partition, except that I forgot the procedures. I can't find the written procedures or have I could find any help to do this. I'd appreciate some help here. Thank you.

  Hello Ward00,

  I understand that you are looking for the recovery procedure your computer back to factory settings. I provided you with the HP support document: performing a recovery of HP (Windows 7) system that will guide you in the process of recovering step by step.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• After Windows recovery, Microsoft Works is missing. How can I get that back?

  Original title: no microsoft work... help!

  I recently had problems with computer so reinstalled with recovery... disks do not save microsoft works which was preinstalle on my computer... How do I get it back?

  Hello

  You cannot back up installed programs

  Contact the manufacturer of your computer to this topic

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to reinstall Vista after Windows 7 test is over?

  How can I reinstall a prepackaged vista on a compaq sr 5000 operating system after the expiry of the trial version of windows 7

  See the following articles on Windows7 uninstall.  They have to help you in this process.

  KB971762 How to uninstall Windows 7

  KB971760 How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder

  KB971759 How to back up your data on a Windows computer

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• G7-2240us Pavilion: after Windows recovery will not turn on.

  I had to do a restore on my laptop. After that that he was done and gone through the Setup program. He asked me to go to activation. When I did he told me that the activation code is not good and tells me to enter another code. I don't see the normal Windows sticker that has the number on it. I was reading through some other people had problems and remember one indicating that the activation code was written in the BIOS. Is there a way to do it and if it is there, why would it be bad code? Any help getting my active laptop would be greatly appreciated.

  @Tn1redneck: the restore should have automatically read product code that is embedded in the UEFI firmware on the motherboard.  Don't know why he did that.

  To find your product code, read the linked thread: find the product - key for Windows 8

  Good luck

• Reinstalling software after formatting

  I want to format my Sansa Clip + for NTFS so I can use transfer a large file (> 4 GB).  Once I'm done, I'll reformat it to fat32.  My question is how can I reinstall the Sansa software so I can still play music.

  
  

• Need to reinstall drivers after Windows 7

  I had to completely reformat my hard drive and reinstall windows from a usb key. Now, I need to get drivers for my network card. Any help would be appreciated.
  Hardware IDS are as follows:
  Ethernet controller
  PCI/VEN_10EC & DEV_8136 & SUBSYS_3577103C & REV_05

  PCI/VEN_10EC & DEV_8136 & SUBSYS_3577103C

  PCI/VEN_10EC & DEV_8136 & CC_020000

  PCI/VEN_10EC & DEV_8136 & CC_0200

  Network controller:
  PCI/VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01

  PCI/VEN_10EC & DEV_8176 & SUBSYS_1629103C

  PCI/VEN_10EC & DEV_8176 & CC_028000
  PCI/VEN_10EC & DEV_8176 & CC_0280

  PCI device:
  PCI/VEN_10EC & DEV_5209 & SUBSYS_3577103C & REV_01
  PCI/VEN_10EC & DEV_5209 & SUBSYS_3577103C

  PCI/VEN_10EC & DEV_5209 & CC_FF0000

  PCI/VEN_10EC & DEV_5209 & CC_FF00

  If anyone knows where I can get these drivers, id really appreciate it. Thank you!

  Hi theogShiggles

  1. Realtek PCIe FE Family Controller series
  2. Driver LAN 802.11b/g/n Realtek RTL8188CE wireless
  3. For Windows 7 Realtek card reader driver

• Special Toshiba software after Windows update to SP6000

  I installed XP home on my SP6000 which was delivered with W98SE 4 years. All Toshiba Software special disappeared. This software is available somewhere?

  Hello

  Do not order anything. All things can be downloaded from the download page of Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite L550 - 13 c - can't configure Windows after system recovery

  After using the windows recovery discs, I get the message,
  + Can not configure windows to run on this computer hardware. +

  I changed the hard drive in the past, and after that reinstalled the software with the same disk without problem. But now it does not.

  Any advice?

  Best regards, HAns

  Have you used the new HARD drive with the same size?

  Probably the image of Toshiba is unable to configure the system due to the size of the HARD drive.
  But to be honest: the size of the HARD drive should not be a problem and so it's just a guess

  However, the fact is that the Toshiba Recovery disk would fix the laptop back to factory settings. This means that even the new HARD disk should be partitioned and the same partitions can be created on the new HARD drive.

  You could overcome this procedure using a Microsoft Windows installation disc.
  Of course the Toshiba drivers must be downloaded separately from the Toshiba page and installed after the installation of the Windows System.