G7-2240us Pavilion: after Windows recovery will not turn on.

Similar Questions

• Windows 8 will not turn on the monitor

  I recently installed own WIN8. Once installed, the monitor does not start up screen. The only way that the monitor turns on is when I update each time, that gives me a few minutes before the screen turns off again. I tried to repair, automatic repair could not fix the computer

  D:\Windows\System\Logfiles\Srt\SrtTrail.txt log file. The screen stays on during installation or updating, but not when windows has loaded.
  I put the Saver screen and the power for EVER and updates from HP, still do not work.
  All surgestions please.

  Hello

  What media you used to install Windows 8?

  You can BCD to rebuild using the Bootrec.exe tool.

  To run the Bootrec.exe tool, you must start the Windows recovery environment. To do this, follow these steps:

  (a) put the Windows 8 installation disc in the disc drive, and then start the computer.

  (b) press a key when you are prompted.
  (c) select a language, a time, a currency, a keyboard or an input method, and then click Next.
  (d) click on repair your computer.
  (e) click on the operating system you want to repair, and then click
  Next.
  (f) in the System Recovery Options dialog box, click command prompt.
  (g) type Bootrec.exe, and then press on ENTER.
  (h) Type bootrec /RebuildBcdand press Enter.

  Please post with the State of the question.

• HP Pavilion running Windows 8 will not install several programs

  Hello

  I got my new HP Pavilion for about 2 weeks now and I was not able to get to install several programs. I can't install Adobe Acrobat or Reader, or my software (Kodak Easyshare) digital camera. At first I thought that this could be a problem with my firewall, bu the Kodak came a disc, not the internet. When I tried to install Adobe, it would download the files fine, but when I clicked on the installation software, nothing would happen (I give the permission to change my computer). For the program of the camera, she went through the installation process, but when I click on it nothing happens. Curiously, for other programs it has no problem. I installed Firefox and Skype without problem. I also tried to download Adobe frm IE10 and Firefox. I'm starting to think that there is something inherently wrong with the laptop. Any advice would be greatly appreciated!

  Of

  Brianna

  Hello Brianna35,

  Take a look at this document and let me know if the troubleshooting steps to help you solve your problem.

  Good luck!

• Windows Defender will not turn on

  I am told that Windows Defender has encountered a problem-0x800106ba. Said so to switch and restart, but to no avail. What then?

  I am told that Windows Defender has encountered a problem-0x800106ba. Said so to switch and restart, but to no avail. What then?

  You are running Microsoft Security Essentials, AVG, Norton or McAfee? If you run one of those, she didn't have Defender. It's good, not bad. Not only is there potential conflict, but there is no reason to have both; basically to have something very similar to the built-in Defender, and both running at a time will be your performance level and create the risk of problems that are contrary to the other.

• HP pavilion g6, feature WiFi will not turn. light stays amber.

  Hello

  My hp pavilion g6 laptop stopped working WiFi suddenly.  I get an error that says the ability is disabled and LAN is not connected.    I press the f12 key to turn on but nothing works.   Help, please.  Thank you.  The witness remains in yellow does not change to white after pressing f12.

  It's a pc hp laptop pavilion g6-1b59wm

  I have 7 Home premium havewindows

  Product: LW354UA #ABA

  Regulatory model: REPLACEMENT - 194C

  In the research and who desire to be this resolved as quickly as possible, I found my own solution. I do not know for how long but... Here's why.

  The problem seeemed in HP connection manager, I went into preferences and activated the wifi via here.  The amber light turned to white.   I tested and it was able to connect to my email.   (YAY!)  and have access to the internet.   I use hotspot and never had a problem with it before, and now, I have also this laptop that I use for this post, and also out of my access point.    the reason why I'm saying that I don't know for how long is this...

  HP connection manager is always read that Wi - Fi (Wireless LAN) is off - still my light is white and I am able to go online and sign up to my email.     ?????

  Thanks I solved my own solution to this. YAY! I'm so happy and excited, happy and proud at the same time. Way to go me. and Yes, BRAVO for me also.

• Windows backup will not accept a new drive after the 2nd backup drive

  Windows Vista Ultimate Edition. Windows backup will not pass make the 2nd drive. Error: insert - % 2 serial number of volume in drive %1 %3.

  (0 x 80070022) . He is the 3rd disc shaped and then gives me this error. This computer broke down twice before after hibernation. Boss will switch to

  Windows 7 and is upset. He leans on Mac.

  Thanks, Terry

  I don't have a solution to your problem of "dvd".
  I have a suggestion:
  Forget to take the backup of files with dvds.
  Buy an external hard drive and use it for backups of files.

  A hard disk of 1 TB post can be had less than $100, to the Canada. The United States will be even less.

  Thanks to the external hard drive for backups of files, you don't have to sit by the computer and feed it with DVD whenever he asks. You can walk away. The computer will do its thing without you.

  A 2 x 4 in box will store all your files. No DVD more formatting. No more marking each dvd. No stacks more DVD.

• my laptop will not turn on after a recent windows update

  Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

  Hello

  1. the updates are was?
  2. what exactly happens when you try to start the computer? You get the error message?
  3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

  Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

  Step 2: Check if you are able to boot into safe mode and send back the same.

• Windows 8 will not activate after 1 year of service

  Purchased a HP Desktop for over a year and it came with Windows 8 (not happy) and it worked fine until a week ago.  All of a sudden when I turn on PC, I get a window that makes me go to the PC game up and says Windows will not turn on, please try again later or contact MS help.  At the same time all products Office has stopped working and I cannot print pdf files either.  Recent activity that can be connected; Norton came on PC but I never signed, I signed up 2 weeks ago. Norton does not feature anti-adware so I also loaded System Mechanic.  I had to because my machine had become infected with adware which was causing slowdowns and annoying pop ups.  How to solve this problem so that Windows is reactive?

  A few other items of interest:

  I always had problems with the download of updates to TurboTax for Windows updates, sometimes work, most of the time not.  Usually, it will look like this works, but progress will be zero for hours if let you it go.

  Thank you for your help.

  First of all:

  Try to do a system restore before you start who encounter this problem to see if it corrects the problem:

  System Restoration - how do in Windows 8 - eight Forums

  If the problem persists, try the phone activation:

  Help with the activation process, contact technical support.

• Satellite P850 - Windows 8 will not restart properly

  Does anyone know why Windows 8 will not restart correctly on the laptop Satellite P850?

  It seems that whenever I have to restart, especially after the installation of an update, it crashes right on the screen of "Reboot" and I usually find myself having to hold the power button down to completely stop and then turn upwards again. Sometimes, I still have to do to make it stop.

  I would be very grateful for any help that anyone can give me please.

  I have no idea why the Windows 8 will not restart correctly, but this document should help you to repair or restore the system of Windows 8 on your Satellite P850

  + Windows 8 recovery & Repair +.
  http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

  Please post comments if this helped and how you can solve this problem!

• Satellite A100 - recovery will not be finished and stop error message occurs

  Satellite A100-S2211TD, OS is Windows XP Home Edition of recovery disk,

  I have updated the BIOS to 2.20 and laptop was working fine. The old installation of Windows factory has worked well.
  After a few weeks, I tried to use the recovery disk to remove the noise from the HARD drive.
  The recovery of disk task completed and the computer restarted.
  I got the stop error message
  STOP: 0x0000007B (0xFA335528, 0xC0000034, 0x00000000, 0x00000000)
  I removed the memory that I have entered over the past two years and return the PC in the factory scene.
  However, recovery will not be finished (he worked to restore).

  I am able to boot in dos with a separate boot disk (Dr. back, windows does not start, not even in the safe control mode) and I did chdsk of the disc and disc is fine.

  I've never used before recovery disc, the only thing different is BIOS 2.20 instead of 1.50.
  WEB of TOSHIBA said that if you upgrade the BIOS most 2.00 you can not return to 1. XX

  Thank you
  g

  Hello

  The A100-S2211TD doesn t support the Intel Chipset!
  This laptop was equipped with the ATI graphics card and the graphics driver on the Toshiba page contains us the graphics driver and chipset driver!

  Have you received 100% good recovery CD?

  In your case I would try to install Win XP from the Microsoft CD to check if the same error would appear if no drivers are included in the CD of the OS.

  Check it out

• Rescue and recovery will not restore backup files it finds when starting

  I recently had a system problem on my Lenovo computer and had to recreate the image. When I try to restore my backup using rescue and recovery (R & R), they prove inaccessible. How to access these backups?

  Details of the options selected in R & R are attached, as an image on the screen of the settings dialog box.

  Running R & R, backups (on an external HDD USB) are visible and can be selected as expected. When the computer restarts in the space of restoration work, after a warning do not turn off the power, you get the error message "the restore has failed because the backup was not found at the specified location. Accept that the computer restarts in Windows. In this case regardless of the options selected at the start of R & R.  Where appropriate I select the USB external storage device in the Setup program and select a backup of those listed.

  I also tried updating all Lenovo utilities, including R & R. The option 'get new updates"errors when downloading the package information Lenovo Service Center (1 on 1) at the helm of the 30% with the error" Exception should not met!

  

  A lot of ongoing issues.  Many Lenovo post deal with each issue. Intel, system update, create a recovery to the USB media.

  For now, I'll address your problems of rescue and recovery. It seems that your system worked well, until a database had records in doubles in it, and you want to use RI to restore a backup on your USB.

  Then you have attempted a return to the factory, which show a lot of questions.

  If I understand your request, you want to restore your system to some time in the past, using a backup RNR. Either last week or 2 months ago. Something that works.

  ===

  RNR will save all partitions on the disk C DD.  It never saves another HARD disk.  2 readers warning has been around for a while. If C and D are on the C drive, HARD drive, it will run through RNR.

  Single file restore only runs on the windows RNR.  But there is no need to restart standalone RNR (pf11 during startup).

  It is ok. At least the RNR version on windows can find and restore your USB /rrbackups, of 5 min or 30 hours. This works.

  ==

  Factory restore installs a RNR version right here. This version probably does not match the version on your USB. If you started the RNR factory with the USB version version, you might expect not found messages.

  ===

  On your system windows today, please state the version installed.  Start using pf11 and indicate the version installed.

  You cannot create recovery media and rescue on the same device. Your luck if anything boots on the USB (other positions).

  Essentially, the RNR standaone version must match the /rrbackups on USB.

  =

  How do restore you to the factory settings? pf11 through the work of rnr or external cd/dvd?

  You are the original owner of the machine?

• Computer laptop HP Presario CQ57 (Windows 7) will not start.

  Computer laptop HP Presario CQ57 (Windows 7) will not start.

  Memory test: past

  Smart Check: spent

  DST short: failure

  ID Q7PS33-5T76ND-MFKR5F-60VV03 failure

  Product ID: QE321UA #ABA

  Hard drive

  Hello:

  The failure of DST short is normally indicative of a hard drive that has failed and must be replaced.

  The operating system and the software can be reinstalled using recovery discs that you made or purchased from HP.

  In order to use the recovery disks, you need to replace the hard drive with one of the same storage capacity or more.

• installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

  NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

  Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Pavillion23: Windows 7 will not be updated. I get error code 800706F7.

  Windows 7 will not be updated. I get error code 800706F7. I removed the update painful KB304394, which of course still blocking updates, earlier. Since then, I find in the history of the update that almost most of the windows update attempt failed.  (A couple for Windows Defender succeeded). Now, when I try to install an update manually, I get the 800706F error code.

  This is what Windows Update tells me on the article that I tried to install:

  Update for Internet Explorer 11 for Windows 7 for x 64-based systems (KB3025390)

  Download size: 190 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to resolve problems in Windows. For a complete list of issues included in this update, see the Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/3025390

  Help and Support:
  http://support.Microsoft.com

  Yes, I have same problem of yours, I've finally updated all those win updates, now that I started some bloggers advice what to do to solve these problems. I actually had a problem with a crash suddenly and blackout of screen and other unusual tracks on this desk, until the February MS cannot install updates. what I've done, I've tried the [FSC.exe] System File Checker, see him through YouTube "how to use FSC,"... Solved problems of 100%, but it depends on the number of files that can not be repaired, my results are minor just repair corrupt files... Try it...

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.