Relief of connection on the iPhone 6 Plus

Similar Questions

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• iTunes could not connect to the iPhone "iPhone", because an invalid response was received from the device.

  So I am a new iphone 7. I had a 6 before that. Everything was fine until the day where I got the 7, I decided to try a manual on itunes for my 6 backup so that I could put this on the new phone. I use now icloud backup but before that he always did on my computer. Its itunes version 12.2.2.25 as it is the most recent, that I can run with 10.7.5 which is the newest my mac pro can work without hacking it. Again, never had a problem before it save and use it to transfer music. Anyway, I received the message "iTunes could not connect to the iPhone"iPhone"because an invalid response was received from the device." I tried 3 different usb cords. I tried both ports to the front of the computer and all 3 in the back. Abandoned and did a backup icloud. Installed on the new phone. Everything transferred except my music library which is real download of my CD via itunes. If something was wrong on the iphone 6, surely the new phone that starts with a clean slate will be very well... wrong.  Same message. Leaves through ports, cables, etc. Is it just a simple matter of ios 10 now works with my version of itunes?

  A new phone will be iOS10.  iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. OSX 10.9 and 10.10 are no longer available. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

• iTunes could not connect to the iPhone, because an invalid response was received from the device.

  Just bought an iPhone 7 today and received the error message "iTunes could not connect to the iPhone because an invalid response was received from the device." Don't know what that means, and I have never had this problem with one of my previous iPhones. Thank you.

  You run iTunes 7.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

  I'm trying to establish a connection between my iPhone and my iMac. The Bluetooth device in the iMac screen must be certified for IFM establishes a connection with the iPhone?

  This connectivity is not supported (except to attach them). What you trying to do?

  Barry

• Windows does not connect to the iphone 5 s

  Hi people,

  Unusual problem here. My iphone connects 4S connected without problem with hotspot, but not my new 5s.  I get the error message "unable to connect to the iphone 5 s.  I went through the troubleshooting but nothing helped.  I reset the network connections on the iphone too, also without success.

  I have a Dell XPS 13.

  Any help would be GREATLY appreciated!
  Thank you people.

  I know that this post is 6 months old, but my Dell would not connect for about 6 months...   Just got my Dell works.  I had to rename my iphone without spaces, numbers or the funny characters.  Settings, general...   Mine has an apostrophe in computer and space.   Dell didn't like it for some reason any.

• Can not find drivers to connect to the iPhone Bluetooth

  Bluetooth

  I installed windows 7 sp1 on a dell inspiron 1520. Can't find drivers to twin with devices such as my iPhone.

  Can someone please tell me a solution?

  Keith

  Depending on what you're trying to do with the iPhone, it cannot be a driver problem.  By Apple design, the connectivity of the iPhone to a computer (Apple or Windows) via bluetooth is extremely limited.  The iPhone does not currently support the synchronization or file or photo transfer to a computer via bluetooth.  It only supports data cell sharing internet connection with the pc to the phone and it is only in certain countries with certain companies and a possible additional fee to the carrier.  Sync and photo transfer is only via iCloud, USB cable, or with iOS 5 and later via wifi if the pc and the telephone are on the same router.

• Verizon computed using data differently than the iPhone 6 Plus

  Verizon seems to count on me by using more data than my iPhone 6 more fact.

  My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

  Nobody noticed this discrepancy?

  I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

  I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

  Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

  Your opinion?

  Ocean 17A writes:

  Verizon seems to count on me by using more data than my iPhone 6 more fact.

  My iPhone was at 1.8 GB, Verizon already had 2 GB, my iPHone was at 2.7 Gb, Verizon has already shown/3 Gb.

  Nobody noticed this discrepancy?

  I called Verizon tech support and they told me that the iPhone sends data to Apple that does not appear in my iPhone 6 Plus' data counter.

  I did the test and for the first two days in the next legislature do not use it for any cellular - WiFi only (and use mobile phone data to support the poor wifi was disabled): he showed 397KO for two days - my iPhone with Apple communication seems to be this.

  Thus, it seems that Verizon recorded a higher than my iPHone data use, and any communication from my iPhone with Apple is not the cause.

  Your opinion?

  Everything you said Verizon is false. The iPhone saves all data sent over the cellular network. There are some data types that will always pass by cell phone:

  • Visual Voicemail
  • MMS messages
  • Push email notifications
  • All data that is transferred when the phone is asleep and not trendy, WiFi is disabled when the phone is in sleep mode to save battery

  Verizon numbers and phone numbers may be different for an entirely different reason. Records of phone as sent or received data, but do not count data that fails to send and which must be retransmitted. Verizon has this data. This happens usually if you have a very low cell signal.

  My experience with AT & T, is that their number and phone match almost exactly.

• Apple Watch does not connect to the iPhone 6

  After updating my iPhone to IOS 9.3.3 6 all my bluetooth devices registered were gone including my Apple Watch. Now, it appears under "other devices" so I can't connect it. I already started my bluetooth and off and reset my iPhone but nothing worked. Any suggestions? Thank you.

  Hello

  Your watch is not supposed to be listed under "Other devices" on your iPhone (settings > Bluetooth), but it should be included in the section "my devices".

  To check the connection status of your watch to your iPhone, go to the eye of settings on your watch:

  • When you view the time on your watch dial, slide up from the bottom edge of the screen, then swipe left / right until you find the glance of parameters. This will specify connected or disconnected:
    • Connected and a symbol of green phone in the upper right shows that the watch is connected to your iPhone via Bluetooth.
    • Connected and a green cloud symbol indicates that your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • Disconnected shows that your watch is disconnected from your iPhone and is not connected to a Wi - Fi network. The symbol in the upper right corner will be a red telephone with a line through it. The same symbol will also see the top of the watch face.
  • Slide down again to return to the watch face.

• bad connection of the iPhone

  Hey, so I just got a new iPhone off of Ebay and everything was working fine until I decided to use wifi,

  my iPhone cannot connect to the wifi connection when I'm in my room and cannot keep a stable connection in my living room where my router is located in

  So far, IV ' e tried solutions like restart my router, then by restarting the phone etc.

  Other home devices can connect to the internet very well except for my iPhone

  So what is someone having the same problem as me, or at least have a solution to solve this annoying problem?

  I would be very grateful

  Hello, you can try these steps to resolve the problem. If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

• Impossible to download and update the app on the iPhone 6 Plus

  Topic: impossible to download and update the app on my iPhone 6 Plus

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• IPhone 6 more touch screens not responding in the year. It is a well reported issue no and a lot with the iPhone 6 Plus. There will be an extended warranty 1 year because of this problem

  I had the iPhone 3 6, with less than 1 year for the touchscreen unresponsive. I had to replace 1 as soon as the next day after getting a new one right out of the box on the Apple store. It is a fault of well-known manufacturers, which I believe is the mother board deforming, still new in the box. Apple has a plan to extend the iPhone all 6 Plus guaranteed after the 1 year period, or at least one year from the date of the phone replacement and the original purchase date? It is right.

  We are all of the users like you

  Please send your comments if you wish to http://www.apple.com/feedback

• HP slate 7 connection to the iPhone hotspot

  Hi, I have a HP slate 7 more. He sees my iPhone 4S ios7.1 wifi hotspot, I click on connect after entering the password. Wifi said is saved, but never connects. I tried to pair to my iPhone. Slate says it is paired, but my iphone says it is not connected via Bluetooth. Is there a problem of comparability with the slate and the iphone?

  No need, my problem was solved by removing the special characters from my name to hotspot

• Connection of the iPhone

  Having problems connecting iphone/ipod touch to windows vista dell computer.  They continue to show that music devices and cameras are not. and I can't download anything.  I took the product to the Apple store they say we have some type of upgrade to our system/computer don't know what he meant.  All I know is that my iphone/ipod touch will not connect.

  Hello

  For your protection the Iphone binds to a single computer.

  You will need to copy the Application data on the first computer, that it was used on successfully.

  For Vista and Win 7.
  Go in start - my computer - C:\ - users - yourname folder - organize - folder and search - options
  View tab - tick show hidden files, folders and drive - AppData - copy the folder and paste them to
  your username on 2nd PC folder.

  For XP
  Start - my view tab computer - C:\ - documents and settings - your username folder - Tools - folder options - tick show hidden files folders - application data - copy and paste them into your user name on 2nd PC folder

  You will also need to copy your folder in the folder Itunes Music on 1 PC and paste to the folder of music on the 2nd PC.
  Also, make sure you use the same version of Itunes on both computers.

  When you have completed the above connect you Iphone and Vista will load the drivers.
  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul