Reloading of the servers in Tuxedo during execution without stop the instance of Tuxedo.

Similar Questions

• Why get error during execution the FPGA VI?

  Hello world

  I have a lot of sense of wrong during execution of a program that has been correctly executed previously. I don't know what I did wrong.

  Now, whenever I run this FPGA VI, I get an error (in the attachment). And, then runs the FPGA VI, but it does not give the data required those he supposed to give as output.

  Any help or recommendations would be appreciated also.

  Thank you.

  Hi auree123,

  There are a few reasons for this error
  may occur.  Could you tell us more about what's going on?

  You are
  I get this error when you compile and if so, at what stage?

  It looks like
  as you may be running it in Interactive Mode, which means that you are viewing
  the front of the FPGA VI on the development computer that you are running - is
  that correct?  If so, you could try to create a VI on your host
  Open a FPGA reference and communicate with the FPGA programmatically rather than interactively.

  Thank you

  Morgan S

  Technical sales engineer

• Edit/delete/add scene coordinates in the table during execution

  Hello world

  I managed to build table allows you to store and record the coordinates of the stage and remind to control steps. However, I need change/remove/add details of scene during execution. I also need to allow the user to directly edit the coordinate from the scene of the array. Wondering what someone knows what is the best way to do it? Or is it better to use the matrix or Cluster? Thanks in advance.

  Best regards

  Han Yen

  Han Yen wrote:

  Thanks much altenbach for all the advice. I tried to do a table 2D control. I've been playing with table in the control. However, I still can't find out how can I detect that I change the data in the table 2D with the more recent issue during execution? How can I then update my current table with the latest data?

  Well, the 2D table is updated immediately and you do not all the other tables.

  Do you mean that you want to update XAbs, etc. where the just changed line is already selected?

  In any case, here's a simple project, perhaps it will give you some ideas. I would recommend using also the tables for XYZPos, entrances etc. and the XYZabs. This simplifies the code because you reduce the number of terminals and table operations.

  Let me know if something is not clear to you.

• Disable the extended FIFO FPGA target during execution

  Hello

  I use a FIFO extended target in my FPGA to constantly calculate the derivative of a measured value (dB/dt). Thus the FIFO stores all values during time dt. This means dt determines the number of items in the FIFO and dB is determined by the actual value less the oldest value in the FIFO. It works well when I initialize with the code in figure InitFIFO.

  But the FIFO of compensation is not possible (see figure clearFIFO). In the while loop if "reset dB" is false, as the new value of B is written on the FIFO, then the oldest value is read from, for the number of items in the FIFO remain constant. To change dt during execution, I need to clear the FIFO and initialize it with a new length (number of items). I tried the next loop, but it does not work. The FIFO does not initilized with the elements. The length is zero and the loop counter for (#deltaB Length2) is 0.

  What I am doing wrong? Is there a better way to erase a FIFO during execution in the FPGA? I'm now stuck for 2 days with this problem and looking forward to any idea or suggestion.

  Thank you very much. Best regards

  Andy

  Hej,

  Thank you for your response. You were correct, that deltab FIFO length was 0 because the defalt value was zero. The problem is that in my host vi on the RT system I put DeltaB FIFO length in a loop of high priority and as you can see when I restart the FPGA, DeltaB FIFO length has a valid value (the code in figure 1 works well with a local variable of DeltaB FIFO length in the FPGA). But the variable to set the variable "reset dB" is under the control of the loop of low priority of the host vi. And there, I had an entry DeltaB FIFO length unwired.

  So, I learned that a control FPGA read/write unwired sends a '0' or resets the variable to its default value in the FPGA. I assumed that nothing is transferred and the last variable is retained if you let a control read/write unwired. Now, I learned of this stupid error!

  Thanks a lot again!

  Andy

• Enter the mathematical expression during execution

  Thanks to LabVIEW 7.0.  Is there a way to enter a mathematical expression during execution?  I am collection of bytes of a device in which the user may have to configure the runtime.  For example, if a package returns 2 bytes, i and j, the user wants to run an equation on the bytes as y = 200i - 3j.  The equation could be anything.  I looked at Expression nodes and formula, but it doesn't seem to be a way to get into the equation by program.  Anyone has any ideas on this subject?

  Thank you.

  I opened LV 7.1 which is the oldest I have.  In this version, the mathematics are in the palette to analyze it.

  In the functions palette click on search and type "parse" or "formula". These searches are formula several screw analysis

  If you have only the Base of LV version, you don't have these screws

  Lynn

• How can I draw several plots by using the XY graph during execution?

  Hello

  I want to draw several plots in the graph XY to the means of execution user will select the number of plots that he wants to draw, depending on this value, I have to get these values and use table generation and then I give to graph XY.

  During execution, but how to do this?

  Please help me in this regard.

  Kind regards

  Herald

  Why start a new thread?

• How to change the frequency of sampling DAQmx during execution?

  Hello guys. I'm using LabVIEW in the measures of the frequency response function. My application requires the sampling rate to change according to the frequency of the signal during execution.

  I tried to do it with a "structure of the event" and it works well when I change the rate manually via the front control but it backs do not work when I set up the sampling frequency to vary automatically (just a frequency sweep). Photos below:

  Why not the structure of the event feels the change in the value of "rate"?

  Thanks in advance for your help.

  Lucas

  Hello

  In "automatic mode" to change the sampling rate, the calculated rate is written in the local variable (as illustrated in the code).  Structure of the event does not change value in the local variable as an event.

  In order to make the structure of the event to recognize the change in value of an indicator such as event: write the new value to the property "Value (Sgnl)" corrosponding node to rate indicator (see figure below).  This will make the structure of the event accept the value change in the indicator as event.

  Note: Use architectures such as producers and consumers for such applications, which makes the application readable and expandable.

  See rear queries if any.

  

• C# takes arguments & reporting during execution of the text file

  I have a text file with the following text:

  int A = 5;
  Dim str As String = "tempstring;
  15, 16, 20, 22 DosomeMethod str.

  When you read the text through my program file, I want to declare int A = 5 & Dim Str as string = "tempstring" during execution.

  It can be as

  String [] st = freader.readline ().split(' ');
  If (st [0] is "int")
  {
  Str [0] str [1] = str [4];
  }

  I know that the above is the wrong syntax, but I want to do something like that with a few references.

  Can someone help me without using the .net irony?

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en/categories/

• change the frequency of the signal during execution

  Hi, I'm working on a VI to calculate excess of signal I think VI seems to be good (not sure) but now my problem is

  change the frequency during execution, which I am not able to do only when I stop and run the vi frequency changes... pls

  someone help me I tried to put in an event... but no use... maybe iam missing something pls help me...

  I noticed that you have some time a loop around the entire block diagram - I'm not entirely sure why that is.  The way you have your VI wrote that the two inner loops will never come out unless there is an error-'stop' buttons are hidden.  Thus, the outer loop is not do anything for you.

  Once you take it, it is easy to see why you cannot change frequency.  It is defined once, outside of the loops and so never gets checked again.  The best way to resolve this, in your case, is to use registers with shift on the upper loop and check if the value of the frequency has changed since the last iteration.  If so, generate a new waveform and feed DAQmx writing instead.

  See the version annexed to your main VI for what I mean.  (I also replaced the controls to stop with one that is visible and which will stop the two loops without your duty to hit the button abandon.) I'm also an error on the DAQmx read in the loop at the bottom, but I'm sure it will work fine on your equipment.

  See you soon,.

  Michael

• Change the value of a Boolean switch rocker during execution

  Hello world

  Is it possible to change the value of a switch to toggle Boolean during execution?

  I make a program where the user can switch a relay switch.  However, I want the program to replace the user input if a measured value exceeds a predefined threshold.

  The program below did almost what I want.  The major problem is that it if the measured value returns below the threshold, the relay will be awarded if the switch is set to 'true '.

  

  I would be very grateful for any suggestions to solve this problem!

  Regards, Martin

  Hi Martin & Asad,

  Well, the problem is even more easy to solve

  After cleaning example of Asad, remove this RubeGoldberg, put in some wait States and make a correct stop button I put in place the example...

• During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

  Original title: identity of unknown folder

  During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

  Can you tell me with regard to this issue, and what, if anything, I have to do?

  Thank you.

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

  "If no part tool above work try a third popular called Unlocker.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• An error [-5005: 0 x 80070002] occurred during execution of the installation of magictune

  Original title: uninstall magictune

  I am running Windows 7 64 X.  By mistake I have install MagicTune Premium.  My laptop is Toshiba Satellite P799 with Nvidia GT 540 M.  I tried to uninstall it using the program and functionality but receive the following error message:

  An error [-5005: 0 x 80070002] occurred during execution of the installation

  When I click OK, it brings me to the Samsung download web site.  I repeat the download and then restart.  The coup explore whenever I try to run.

  I always unable to uninstall it.

  Grateful for the help

  Thank you and best regards,

  JC

  Hello
   
  
  Follow these methods and check if that helps:
  
  Method 1:
  
  

  Try to uninstall the program in clean boot mode and check if it helps.

  
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135
   
  Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.
   
  Method 2:
  
  I suggest you follow the troubleshooting steps form the article and check if it helps.
  
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

• Rename the files in the dir folder during execution.

  Is it possible for actionscript and my request to rename a file during execution.

  for example

  TextFile.txt and rename textfile.draft (.draft extension would be accessible by my application only)

  any suggestions would be greatly appreciated.

  Dave

  Refer to the documentation of flash.filesystem.File.moveTo ().

  Also, make sure you only specify the authorization/action access_shared in the blackberry file - tablet.xml.

  Note, however, that if you really want this '.draft' file accessible only to your app, possibly you should rather make a copy in your folder of applications and only 'release' to shared folders when it is no longer a project.

• Problem with pl/sql procedure, trying to get the value of the user during execution

  Hello

  Using oracle 11.2.0.3

  Can run sql that gets the value of the user during the fine workmanship and also via an anonymous block.

  uses of SQL & Enter_Product_Number

  anonymous block using: Enter_Product_number.

  However, get problems when trying to create a pl/sql procedure, use one of the above

  relevant below tried code part & and: buit works do not error, try bad bind variable if used: and ora-600 if try use &.

  How can we have a procedure from pl/sql that can call and receives a value of user during execution?

  Only way around what I can think of is to pass parameters to the procedure

  Thank you

  create or replace procedure ins_into_issues is

  v_nd_rec_cnt number (10);

  v_normal_rec_cnt number (10);

  Start

  Select count (*)

  in v_nd_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & old_nd_product_number;

  Select count (*)

  in v_normal_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & normal_product_number;

  -code below commented above works.

  end;

  Hello

  what something like this:

  create or replace procedure INS_INTO_ISSUES ( in_normal number, in_old number )  is
    v_nd_rec_cnt     number(10);
    v_normal_rec_cnt number(10);
  begin
      select count(*)
        into v_nd_rec_cnt
       from refmast.issues i
       where i.iss_product_num = in_old;
    --
      select count(*)
        into v_normal_rec_cnt
        from refmast.issues i
       where i.iss_product_num = in_normal;
  end;
  

  concerning

  Kay

• Filter the Table during execution and keep uncommitted line changes

  Hello

  I have a requirement which has been quite difficult for me so far.

  I use the first version Jdev 12 c.

  I have a table of AF that is connected to a ViewObject that is used for sending new data.

  When I add lines to this ViewObject, I put a field that I intend to use for filtering so that the number of lines is not displayed at the same time.  This field comes from a selection of LOV.

  I want to be able to change lines are displayed in the table based on what is the current value of selection LOV.  This isn't a problem for me, and it works perfectly using a view criteria and a variable transitional EO I put in place.

  My problem is that when I select a new value in the LOV and change to bind the variable view criteria, I want all changes uncommitted to the lines to be preserved in the View object.  Currently, the lines are not keep their changes, and I need to do this, because after that the user has entered data for a large number of lines, there will be a commit to the database for all new lines added.  Is this possible or should I look for an alternative?

  I also tried to use a table filter in the link of the page layer, but I get an error that I can't debug. It is marked as Houston-34014.  In this method, I try to access my bean in pageFlowScope to filter the table.  This bean variable is updated when the LOV selection changes.  Error messages settings are {0 = oracle.jbo.Key [-220-225], 1 = root}.  I also read that this filter parameter is a static filter and does not dynamically during execution.

  Any help would be appreciated, thanks for reading.

  Hello lhymel

  I think that your problem is solved, so please close this thread and open a new thread for tuning related problem

  Thank you

  -Ashish