Relocation of LR3 on Win7

Similar Questions

• Won't turn on after "relocation" on same HD Win7.

  Won't turn on after "relocation" on same HD Win7.

  Same HD (with existing work WIN7) has been used in new construction after that old MB crapped out. It wouldn't boot, so I re-installed Win7.
  It was the 2nd PC on a PC 3 family pack update version.
  The last time that I had a problem with the activation I actually had a phone number to talk to a real person, but now I keep running into dead ends... help! (25 days)

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Direct activation number: (888) 725-1047

  1-800-936-5700

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• Relocation of windows.old (Win7)

  I have recently reinstalled Win7 on my acer predator 5900 and regretting what to do.

  I tried which follows the steps on http://support.microsoft.com/kb/971760/en-us but I always get the message "the system cannot find the file specified." and steps 5 and 6 seem not to aply for Win7, so he ends up doing nothing.
  Also, it might be interesting to note that my previous installation was in french and the resettled version is English.

  See if that helps (Note: the article was created for the restoration of Windows 7 in a preview of Windows 8 but the steps are the same): http://www.pagestart.com/w8pbrecoverw710291101.html

  J W Stuart: http://www.pagestart.com

• Error code c0000006

  I have a Win Vista SP2 32-bit machine that no longer start. If normal mode or secure, it translates into a blue screen with error code c0000006 due to state of error / 0 x % 08 lx.

  A chkdisk /r ran from a command prompt, started from the CD.  Some errors were found and corrected.  Still will not start.

  WinRE boot using check since a DVD VistaSP2 he don't find any problem with the exception of the inconsistency of system file, but correct, showing the 0x45d error code.

  By selecting a restore point recovery results in a message that there is no restore point, even if the machine has been set to save by default.

  It is an error to attempt to run sfc of the admin over WinRE with a sfc/scannow command prompt or sfc /verifyonly
  "Protection of resources Windows could not start repair service".

  Try to do the same thing in offline mode with sfc/SCANNOW damaged = c: \ /OFFWINDIR = c:\windows couldn't results in error "Windows Resource Protection perform the requested operation."

  There is no file \windows\winsxs\pending.xml.

  I can not apparently perform an in place upgrade of relocation (or upgrade to Win7) if the existing system does not start.

  Any thoughts what to try next?

  Well, it seems that it is now moot.  The HD has just died.  It must have been endangered.  Looks like a new HD and clean install of Win7 is in order...

• G42-415DX: difficulties with Win7 not recognizing correctly the two monitors

  Prior to my recent relocation, I used a 2nd monitor with my laptop, where my 32 '' has the main screen, but the screen of the 14 "laptop would show other programs instituted for example PDF file. It was easy to make this configuration and I loved this multitasking.

  After a recent relocation and update the map AMD Win7 I appreciate the high resolution display on the screen of the laptop, but I am not able to repeat the simplicity with which I've done it before.

  The 2nd monitor is connected through a HDMI cable. Whether with the extend in double bill or, if I use the laptop as the main screen, office shows the program and the taskbar icons, but when I change the main view for the 2nd monitor, disappears from the task bar and the icons of the programs even beyond the screen. When the screen resolution is clcked on the desktop, both monitors display side by side, but 1 monitor is format 6 x 9 32 "with the correct name and resolution, then it should be 14" 4 x 3 laptop. 'Detect' & 'Confirm' to be 1 & 2 also shows, but the sizes are the opposite.

  I rebooted without the 2nd monitor attached and as expected, it would have it, it displays the screen of the laptop in its format 4 x 3. At the level of the office, now fix the 2nd 32 "6 x 9 (widescreen), makes the 'screen resolution' show that they are returned in size, but the correct resolution.

  All this seems to have been to update the map of the ATI AMD M880G

  I'd like the ability to use a 2nd monitor

  Any help. I would be very happy

  As suggested, I've updated graphics drivers with the latest on the HP website. My fear, after the previous update disheveled my universal Bus controllers, was unfounded.

  Whalla, everything goes well and as shown on one of your previous answers, I have managed to place a monitor (or side) above the other and Institute (under Extended display), the use of two monitors. It's exactly what I wanted.

  Thank you for your insurance.

• try to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926

  I'm trying to print from my Win7 x 64 laptop over the network (homegroup or workgroup) to an enslaved Dell Photo AIO Printer 926.  When I look for the computer on the laptop, I find, it seems to be fine, but when I print a job, the print job is in the queue on the laptop and does not send the job to the desktop printer.  I had it once before but a relocation removed.  I'm not sure why I see the desktop of my laptop printer but cannot get it working again.

  Any advice?  Thank you

  You need the Windows7 x 64 drivers for the printer (and perhaps software and fimware) installed on your laptop to be able to print using the printer on another computer if he uses another operating system...  Maybe when you reinstalled you forgot to install these things.  Try this and see if you can then print.

  If this does not help, please post in the Forums Windows7; http://social.answers.Microsoft.com/forums/en-us/category/Windows7 where Windows7 experts will be happy to help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update failed during the restoration of Win10 for Win7

  Hello

  There was a update failed while he was in the process of restore. Once the process is finished, I noticed that, so I clicked on "Install updates". Which also failed.

  I've never met update of the issues before the restore Win10 to Win7.

  Name of the update problem :

  -Microsoft .NET Framework 4.6.1 for Windows 7 for x 64 (KB3102433)

  Type of computer / OS :

  -Hewlett-Packard desktop computer bought in 2011, AMD Athlon (TM) II X 4 955 processor 3.20 GHz, 8.00 GB of RAM

  -Windows 7 Home Premium (preinstalled at the factory), Service Pack 1, 64-bit

  Antivirus applications installed before the upgrade and at a Win10; those after cancellation for Win7 :

  -Windows Defender (off)

  -Malwarebytes Anti-Malware free (do not prompt for reinstallation, update to Win10, have not opened since rollback)

  -AVG AntiVirus Free (relocation for upgrade to upgrade to Win10 successful, reinstall to update to Win7 after restoration, failure)

  Previous programs anti-virus installed / uninstalled :

  -factory pre-installed Norton Internet Security 2011 (60-day trial subscription). Uninstalled in 2011.

  -ISP provided security: Shaw Secure powered by F-Secure. Uninstalled in 2012.

  These are in the downloads folder (but I don't know more what/why and can't tell if they are installed programs or not) :

  -Windows-KB890830 - x 64 - V5.20.exe: Microsoft Windows Malicious Software Removal Tool, version 5.20.11000

  -msert.exe: no details of properties (no version, no digital signature, etc.), but I think that it is supposed to be the Microsoft Safety Scanner

  -windows-kb890830 - v3.21.exe: Microsoft Windows Malicious Software Removal Tool, version 3.21.5103.0

  -NPE.exe: Norton Power Eraser, version 2.0.0.52 the file, version 2.0 product, year 2011

  Latest updates successfully and the repetition does not install of KB3102433 :

  

  Error codes for KB3102433:

  -26/08/2016: 80200001

  -29/08/2016: 13EC

  -03/09/2016: 643

  -03/09/2016: 643

  Measures taken and the results:

  1) has no installation by the restore process: (KB3102433), 80200001 Code

  -revealed by timestamp in the update history

  (2) Windows Update interface: 1 important update available (KB3102433)

  -Click on install updates

  Result (s):

  -Failed / update history does not record the event

  3) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error during installation"

  -Updated story does not connect me

  (4) download and run the Windows 7 update (wu10.diagcab) troubleshooting tool

  Result (s):

  -Popup: An error occurred when troubleshooting: a problem is preventing start the troubleshooter.

  Identifier of the package: WindowsUpdateDiagnostic

  Path: unknown

  Error code: 0 x 80070002

  Source: engine

  User: (me, user Admin account)

  Context: restricted

  (5) run the System File Checker tool

  Result (s):

  

  (6) Windows Update interface: 1 important update available; KB3102433

  -Click on install updates

  Result (s):

  -This time the story recorded event update:

  Installation date: 29/08/2016

  Installation status: failed

  Error details: Code 13EC

  (7) download and run other troubleshooting of Windows 7 update (WindowsUpdateDiagnostic.diagcab)

  Result (s):

  -He scored a few points set except one:

  -"" Problems: Windows Update, error 0 x 80070057 do not set ""

  -This stage caused the update Interface to turn red on the theme and lose all it's information. such as:

  -1 important update available / 8 optional updates available <> before - now -online NO update available

  -Final check of updates: front: 29/07/2016 - now: never

  -Updates have been installed: front: 22/07/2016 - now: never

  -"Install updates" button "Check for updates" has disappeared, replaced by

  8) of http://support.microsoft.com/kb/3102433

  -Download and run the "download the .NET Framework 4.6.1 (Offline install) package now"

  Result (s):

  -"Installation failed...". Fatal error when installing... See log file»

  -Updated history do not log the event

  

  (9) click on ' Check for updates ' hopefully bring "updates available".

  Result (s):

  -He kept checking for about 2 hours without change

  -I didn't know how to cancel the verification process, then...

  (10)... Computer restarts

  Result (s):

  -updates stops

  -Updated Interface:

  -Does not display available updates

  -Final check of updates: never

  -Updates have been installed: never

  * 3 days later, without getting any change, it automatically installed 9 updates successfully. Now, the update Interface is once again changed. "Show all available updates" option appears, horodateurs, replacing '' never. ''

  (11) select problem update (KB3102433), and then click on install

  Result (s):

  -A failed; Error Code 643

  -Click on 'Try' again: same results

  Any help would be greatly appreciated.

  Thank you

  Proceed as follows: Set "Never search updates" automatic updates, restart, and try again.

  Best regards, VZ :)

• Vostro 3550 wireless turns off after reinstall win7

  I reinstalled win7 on my vostro 3550, and now I have no wireless on WLAN connectivity.

  Diagnosis of Win7 tells me to turn on wireless capabilities, but when I run Wi7 Mobility Center, the without thread appears, but there is no option to turn on the radio.

  It's a Dell 1702 b/g/n A00 install folder picked up dell support pages.

  The chipset driver for the chipset HM67 is also installed.

  Everything worked until the relocation is not a hardware error.

  I suspect that the resource of win7 DVD at the origin of the error.

  Anyone with the same problems or a solution to my problem?

  The magic word is "Fn F2". This function disables / enables radio on the wireless network card. It so there's no way to turn the radio power in the selection of the drivers of the setting, but only a material implementation on "Fn F2"

• How can I load LR3 saved curve tone (XMP file)?

  I created a custom LR3.6 on Win7 64 bit in an XMP file tone curve, change the default location to another folder. I right click on the <>icon Custom and sees the record function and some predefined curves, but not the tone curve I saved I called "Backlit Tone Curve.xmp." I need to move to a special folder in the presets directory? I restarted LR and it still does not appear anywhere. I consider myself computer savvy, but don't know what I'm supposed to do here. Thanks in advance!

  I have some thing you put the file in the wrong place. When you use the "file of Presets Lightroom to show" what you get is, well, the Adobe\Lightroom folder. But the curved subfolder must be effectively under the folder Adobe\CameraRaw ...

• Adjustment brush displays no more than "handles" (LR3.2 / Win 7)

  I am running LR3 (3.2 now, but that's happened before the last update) on Win7 Ultimate 32 bit on a Quad Core system with 4 GB of RAM.

  Here's the problem I have:

  LightRoom stopped showing the round small button / handles when I apply the "adjustment brush.  The same handle is always displayed on the graduated filter.

  The brush works fine apart from that.  The big problem is that if I apply the swabs one (or several) to an image, I can not catch their handle to change their more.  Very, very annoying!

  Any suggestions short nuking the current installation and re - install from scratch (which is a real pain with Adobe products)?

  Thank you.

  Denis

  Yes, nuking the installation and resettlement are a way to solve the problem.

  By pressing H is another way to solve the problem

• LR 2.6or7 and LR3 on same machine? You want to test.

  I would like to see if my setup will have problems reported here. Can I install BOTH programs? (Which would add LR3 for existing facility of 2.6). I really just started using LR2.x earlier, but I want to try LR3 with images off-production. I don't have a separate test computer.

  Win7 64-bit Home Premium

  6Gigs of RAM

  I7 - 920

  nVidia GTS250 w1Gig VRAM card

  JBOD storage

  Other users have problems of recovery, but there must be many machines without any problem. If I can't test I put the box on the shelf for now without having to install.

  Jonathan

  I get a "debate" with this issue, but nothing is returned for the search strings I tried...

  Jonathan,

  I did the exact thing that you offer since v3 came.  I'm having some problem of performance so wait 3.1 or 3.2 to start using the new features.  I didn't want to not all crossing - so I didn't convert the v2 catalog when you first start v3.  I had v3 start a new empty catalog.  Then I copied a few directories of images in a new article on my hard drive for LR3 test (several thousands of images with multiple installations of lighting/noise) and reopening lr3, I imported in place in the new catalogue v3.  In doing so, I don't have to worry about accidentally doing a Ctrl-S in images that would be considered by both versions.

  Once I'm done trial v3.1 (I hope) or v3.2 and I'm ready to convert, I remove the new catalogue v3 and the operating system start the old catalog v2 'by' LR3.  This will start the process of converting the old catalog at this time here.  In the meantime, I'll just make the production activities on my v2.

  Everything looks good to me for v3, but the loss of performance in the removal (almost useless) cash tool requires me to wait awhile.  It is not a power issue in my case, maybe video, perhaps a necessity for rendering optimization, perhaps something else.  Time will tell - they'll understand eventually (remember the early versions of the local adjustment tools...).

  Jeff

• E330 - E530 Win7 key / activation

  Hello

  On the old E520 series you had your windows key 7 under the battery, which allowed for easy relocation.

  The key worked even though you would be reinstall from an OEM DVD which is not the case for other brands (I know)

  I recently put hands on a new E330, preloaded with windows7 pro & set at level of Windows 8 discs.

  I have nothing positive to say about windows8, so I'm not going there.

  But I don't want to reinstall Windows 7 on SSD I hang out alternatives.

  Let's start first of all, I created a full disc image with windows Backup to make sure that I had a full image without having to re-do my basic installation.

  Things, I tried so FAS:

  -Connect the SSD drive and reinstall from DVD-> can't activate windows (I have no phone option and the serial number I extracted to the default installation does not work)

  running 'SLUI.exe 4' does not give me an option by phone either

  -copy the image to the SSD drive-> image is too large and lacks of enough space.

  -restore the image of the DVD 'create the resumption of the plant' suite on the SSD-> not enough space of lenovo.

  So the only option I see would be to remove the recovery partition Q.

  Resize the C partition, until it fits on the SSD

  load the new, smaller image (without recovery partition) on the SSD

  resize the partition C on the SSD to make use of all the space on the SSD drive

  I remember that one of the attempt to clean reinstall gave me an option by phone (I think I installed win7 without entering a serial number during the installation) but after you call the phone number & entering all numbers, he asked my, if I wanted to activate office for mac...

  I'm still trying a few things, but I was wondering if anyone here had any suggestions.

  I have to start using my laptop the week next, but by the looks of it, I have remove Q: and just resize C: up to what fits on the SSD

  If anyone has any suggestions, feel free to let me know

  Signed, Sven

  Edit: I also noticed the same thing on an E530 of a colleague. so I guess this is true for all laptops Lenovo from windows 8 was released?

  MDSven wrote:

  -restore the image of the DVD 'create the resumption of the plant' suite on the SSD-> not enough space of lenovo.

  Did you actually create the recovery disks and then try to recover the Virgin SSD with them?  As far as I KNOW, it should work as first the recovery partition will be created and then the installation of this partition.

  Another option would be to be able to fix the original external drive, with the SSD inserted as primary and then clone using a spare drive Acronis and resize the C: partition, leaving the recovery with its original size partition.  Once completed, you could then remove the recovery Windows partition, keeping the original disc as a provision for the worst-case scenario.

  Edit; typo

• iTunes 12.5.1.21 on Win7 crashes

  I installed iTunes 12.5.1.21 on win7. He added without starting. I got the error info: I installed iTunes 12.5.1.21 on win7. He added without startingnes has stopped working. Details of the problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: iTunes.exe

  Application version: 12.5.1.21

  Application timestamp: 57d32fa7

  Fault Module name: WebKit.dll

  Fault Module Version: 7602.1050.4.5

  Fault Module Timestamp: 57 c 12000

  Exception code: c0000005

  Exception offset: 0000000000645e36

  OS version: 6.1.7601.2.1.0.256.4

  Locale ID: 1033

  Additional information 1: 271e

  More information 2: 271efe72e7fc7ac20bc86454f7f2adf1

  3 more information: 8ae1

  Additional information 4: 8ae122c2f5283cc8819a38c5c1a23646

  I tried to uninstall and reinstall only - no chance.

  I tried to run itunes in safemode, but always the same abend.
  How can I fix?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Connection PC Win7 for iMac USB printer

  Until yesterday, I had a printer is connected (USB connection) to a Time Capsule, and our laptop Windows 7 given the printer and would print it. But due to persistent problems with airport part not always wanted to connect with our satellite internet, I went to a separate router and the stop of the part of the airport. The Mac has been able to print to the printer, but the Win7 PC could not. Then I moved the printer (USB connection) to the iMac, but I still can't the Win7 PC to see the printer. I tried several methods but were unsuccessful.

  Anyone has a suggestion or a position that could help? I found a ticket to Microsoft I've tried, but it does not match what the current software. I use OS X 10.11.6.

  I'm planning on dumping, in the future the Win7 system and buy a new Mac, but until now, I need help.

  Fred

  Trying to install Print Services for Windows Hello on the Win7 PC. This app will allow you to see the shared printer on the iMac and allow you to print on it.

• Thunderbird is stuck does not. even in safe mode. (win7) SOLVED by disabling Windows prefetch and superfetch services

  Thunderbird is stuck in the mode "not responding". I tried various fixes suggested on the web, such as restarting in safe mode, using Thunderfix and except on records of Thunderbird to antivirus scans, but nothing works. FYI, my antivirus is Norton Internet Security. I hope someone can help. Thank you.

  You could take a little further...

  Please start * Windows * safe mode with active network
  -win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
  -win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7

  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?
  Just reply to inform us of the results.