Remote access from one machine to another triple monitor machine triple monitor

Similar Questions

• Move a virtual machine from one SAN to another

  Top o ' the morning, tech heads,

  I have a VM, I need to move from one san to another. I think I'll need to shut down the guest operating system, download all the files (see image), create a lun on the san of destination, then download the files to that lun. Lack of vmware 5.5. Is that what that sounds right?

  Your ESXi host vSphere is a stand-alone type or is managed by vCenter? If managed by vCenter, just make a Storage vMotion... If not, take a look at this article: VMware KB: move or copy of a virtual machine in a VMware environment

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• Migrate the virtual machine for Exchange 2010 from one host to another

  Dear members,

  Please let know us if the migration of a virtual machine for Exchange 2010 is supported to an Esxi host to another, the Esxi version is 5.0.

  There are unique Exchange environment with the role of hub, CAS and mailbox on the same virtual server. We have a maintenance window and we think moving exchange virtual machine from one host to another, but before that I need to be sure if it's supported my MS and do not want to have problems after, because I have also gotten to know here in the forums this snapshot for Exchange 2010 is not supported by Ms.

  Please notify.

  Kind regards

  I'm not aware of any limitations with VMS Exchange migration. Anyway, you can consider running the migration during the low workload.

  André

• How to move virtual machines from one host to another without full VI and vMotion?

  Hello

  could you help me with a question?

  I have two installed hosts with ESXi 3.5 U5, which are connected to the shared iSCSI (Openfiler) - VMs storage are installed on the storage disk. My requirement is to have a cheap solution of DR - in case of failure of a host, I need to move and start VM on the host of work. How to achieve without going through VMware Infrastructure 3.5 and vMotion?

  I found this article:

  http://www.virtualizetips.com/2010/04/how-to-move-a-VM-without-vCenter-or-storage-VMotion/

  but RCLI needs Infrastructure of VMware ESXi does not have default CLI So, how to move VMs between hosts (of course I mean "cold" move) without byuing any additonal VMware SW? It is generally possible in my situation?

  Thank you.

  ARO

  Danas

  If the virtual machines are running in shared storage (two guests see the same storage iSCSI or NFS) then it's simple. If a host goes down, then look for the data store on the ESXi host work. Navigate through folders for each virtual machine, right-click on the VMX file and add to the inventory. You will then be able to turn on the virtual machine.

  To move a virtual machine from one host to another, as long as both hosts had the same processors, you can pause the VM on the single host, browse and add the virtual machine to the inventory on the second break host and the United Nations.

  If the virtual machines are on local storage, but the two hosts are connected to the same shared storage, clone virtual machines on a daily basis from local storage to shared storage. Use something like ghettoVCB http://communities.vmware.com/docs/DOC-8760 make the clone. In the case of a server failure, you will be able to browse the data store, add to the inventory on the shared storage and switch the cloned machine.

• Trying to copy a virtual machine from one server to another

  Hi all

  I'm new to ESXi 4, although I used VMWare Workstation for years.  I am trying to copy a virtual machine from a Windows system (Sysprep) from one host to another.  The two hosts are identical systems with the exact same ESXi host configuration.  Same hw, same version of ESXi, same setup, same size of the partition.

  When I use the Vsphere data store browse to 'download' the vmdk and vmx files to a local drive (Windows Server 2003), I get the following 3 files: the same vmx file, a tiny vmdk file and a file huge filename - flat hard.  The file vmdk on browser to store data from the source host is about 23 GB.  The flat on the local system vmdk file is almost 63 GB.

  Can I reopen Vsphere on the destination server and "load" the 3 files in a directory that I created in the data store.  Once there, I use the browser "Add to inventory."  When I try to turn on the virtual machine, I get the error message "not enough space on the data store."

  Any ideas of what I could have done wrong?  Again the data store configuration is identical:

  Local disk to VMware: 62.95 GB, Total formatted capacity: 62,75 GB.  1 VMFS 3.33 MB block size it's the only VM on the system.

  Thanks in advance,

  Mark

  What you see is by design.

  When you try to copy a disc loaded end service, with the browser data store or FastSCP, the virtual disk will be inflated. Use the converter such as recommended by AlbertWT.

  Since the virtual disks of destination must already 60 GB of disk space you may not able to power on the virtual machine, because there is not enough disk space for the swap file, which is the size of the configured RAM (less reserve, if necessary).

  André

• What is the best method to transfer a virtual machine from one PC to another?

  I am a novice in VMWare workstation. I created my first SharePoint 2010 development VM, and my boss wants me to give him a copy of my SP 2010 VM. He told me to just give him the. VMX file, but I believe that there must be a better method to transfer a virtual machine from one PC to another.

  Thanks in advance.

  Coltrane.

  Coltrane,

  to transfer a virtual machine from one PC to another, shut down the virtual computer and copy the complete folder with all the files (vmx, vmdk,...) on another PC.

  A thin to keep in mind (outside the Windows license) if the virtual machine is one attached to your network, you must change the copied disk - as you would with a cloned physical system - to have a unique host name, MAC address and IP address.

  André

• How one move the templates of virtual machine from one host to another host in the cluster even

  Hello

  Can you get it someone please let me know how to move the templates of virtual machine from one host to another host in the cluster even?

  Thank you

  James

  Welcome to the forums!

  Convert it to a virtual machine (right click on guest and choose the appropriateoption), move it through the migration feature (right-click Guest, and then choose "Migrate") and convert into a model (right click on guest again and choose to convert to a template).

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• How to move templates of virtual machines from one host to another, if the partners host is offline

  Hi people,

  I knew that I need to convert a virtual computer model to a VM to move from one host to another, but that when the host, that the model is associated with, is offline / broken? Is it possible to make it work again on the vsphere client or only via the command-line interface of cmd and save the model with the host?

  Thanks in advance.

  Kind regards

  Bjoern

  You can try this...

  If you have another ESX host to add the data store to which the template is stored.

  After that browse the data store and go to the directory of the model. Select the model VM file and add it to the inventory and select the host on which you want to add the template... After you have added the host convert VM...

  Thank you

  Please indicate if useful...

• How to transfer a project from one computer to another file

  Hello

  In order to burning a DVD on my laptop that is older, I'm trying to transfer a working from a library folder and insert it into another on the old computer. I used a USB key. All the data has been transferred, but how do i:

  1) enter a library on the old computer? I DID this, but it will not appear in the Final Cut. I "Showed the content" and it allowed me to put the file in THIS library, but it will not appear in the column "libraries."

  (2) create its OWN library on the old computer?

  Thank you.

  Mike Scully

  Stay out of the whole library. This is a complex database. If the components have moved the database becomes useless. Pretty much all you need to do inside the library can be done from the inside of the PCF.

  If you cannot move the entire library from one machine to another on an external drive, you can move a project of a new library. That will copy only the clips used in the project. You can take it on the other machine. You can also export a master file and consider on the other machine to make the DVD. It is perhaps the simplest.

• How to transfer the contents of my Itunes from one PC to another?

  Hello

  I tried several options that I found on the web, but no seem to work and my playlist are all empty?

  I have the usual content in Itunes, music, games, memos, tones...

  I would like to use Itunes as I did on my old computer to my new computer...

  Thank you

  Migrate a library iTunes from one computer to another

  These are two approaches that work normally to move an existing library to a new computer.

  Method 1

  1. Save the library with this trick of the user.
  2. Remove the old computer if you no longer wish to access content protected on it.
  3. Restore the backup to your new computer by using the same tool used to back it up.
  4. Keep your current backup in the future.

  Method 2

  Connect the two computers on the same network. Share your folder from the old computer and copy the file whole iTunes library in the folder on the new. Yet once, remove the old computer so is no longer necessary.

  These two methods should give the new computer, a clone of the library work which was on the former. What about iTunes is it is still the 'home' for your devices library you should not have problems with iTunes will erase and reload.

  I recommend method 1 because it establishes a current backup for your library.

  Note If you have iOS devices and that you have not reached your contacts and calendar all in all items, then you need to create a dummy entry in your new profile and iTunes expected to merge existing data from the device.

  If your media folder has been separated in the main folder of iTunes, you may need to do some preparatory work to make it easier to move. See make a library of portable split.

  If you are in the unfortunate position where you're able to access your original library or a backup and then see recover your iTunes from your iPod or an iOS device to get tips on how to configure your devices with a new library with the maximum preservation of data.

  TT2

• Is there a way to copy properties to disable conditional from one project to another?

  I have a bit of code in a project that I want to back off to a colleague and want to do a new 'reduced' project with only a few subvis.  I don't want to necessarily or need him for the entire project, but only access to a privileged few.  Is there a way to copy the conditional disable properties from one project to another?

  Thank you

  Tech12

  Thanks, it works, but I couldn't get the symbols will appear in the 'project' "Properties..."

  Tech12

• Move the HD from one office to another desktop computer

  It is a question about moving the files & applications from one desktop to another. I try to get 1 year of use of existing & software equipment.

  I have an office of stand-alone Dell old 12 years with Windows XP that I use every day at home. I have an old Dell Office of 7 years with XP & no apps or files that I have gained from the work that I do not use.

  I guess the older machine is sick because I have to reset the clock each time I boot Windows. It seems to work otherwise. I want to act before the death of the sick machine.

  A method that I am considering moves chips drive & memory fixed older machine to the latest machine. These two components are less than 3 years. I replaced a fixed disk damaged & added some memory.

  The other method I see is to copy the contents of the fixed disk on the sick machine on the newer machine fixed drive, leaving the components in place.

  I know I need to buy new hardware and new software. I would wait 10 Windows.

  I'd like suggestions on the simple, reliable and cost-effective method to buy more time by using existing hardware.
  Pat_Hof

  To move the data from the user, just install the xp installation cd, search for "other tasks" in the

  menu, search for "File Transfer Wizard", set the pc as old pc, select the file to save, save files

  in a new folder that you created, once its through, out of xp cd. Move the new folder to a cd

  Once through, on the new pc, install the xp installation cd, locate the file transfer, set the new pc, select

  to search for files, installation cd with user data, find the folder on cd, install FTW

  It automatically... Best bet is to run FTW on a new user account, and then move the files to the other as

  necessary. It's one way, others, install the HD from old pc to new, HD set as slave,

  with the HD as a slave, the data can be used with the operating system.

  Windows 10 is already available.

• How do I move the express email outlook from one computer to another

  Hello

  How can I move my mail express outlook from one computer to another?

  Thank you!

  Assuming that the other machine is using Outlook Express too...

  Backup restore &:
  http://www.insideoe.com/backup/

  Backup and cloning of your OE identities:
  http://www.insideoe.com/backup/clone.htm

  In other words if you wish is to create folders on the desktop and do drag OE messages to these folders. Copy them to the Office on the new machine and then drag messages in office files to the OE files.

• problem of collage of video clips from one film to another file

  I use the Director of microsoft with Windows 8.1.  I have many movies at home that I edited various movie maker project files.  I would like to take some of my favorite clips of different projects and paste them into a new project.

  This has not worked for me.  That's how I tried to do.  I open the project file with clip I want to copy and paste.  I clip on the clip and select copy.  I then open the movie maker project where I want to paste this, and I click on the Clipboard to paste highlighted at the top left of the screen.  When I do that, I just get some sort of error noise ding, and then function to paste the Clipboard is grayed out.

  Anyway, how can I copy the project one film to another machine?

  Thanks much for any help.

  Sorry to post what I finally understood how to do this!  In case anyone else has had problems, here's what I discovered.

  To paste me a clip from one file to another, the destination file should have at least a clip already on it.  So what I did was import a video in the file as if to edit it, and then I managed to stick a clip of another movie project in this file, place the new file alongside the existing clip.  I guess you must have at least a clip holding a place for the paste function to work.