remote access to the computer that is connected to a router wireless

Similar Questions

• I want to see all the devices that are connected to my router

  I have a router E1200 and it is very good, however I have noticed that there are 12 devices connected to my router so infact it should be only 4 devices. I would like to see all the devices that are connected and disconnect those who do not belong to HELP!

  You use software to see all the devices that are supposed to be connected to your router? You can reset and start over with your router.  Make sure you have security enabled on it as WPA Personal. You can try a DHCP reservation so to ensure that devices that will have access to your router are those you have included on the list.

• How can I remote to a local computer that is connected to a VPN?

  I have a laptop that I have developed on which must be connected to the VPN to my company in order to access the interal services to society.

  I have the same laptop and a desktop computer at home on a local network. When the laptop is not connected to the VPN, I am able to distance in very well since the office, however, when connected to the VPN I can is more distant in.
  Is there a way to fix this?
  Thank you

  Hi Casen,

  The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Keep us updated on the status of the issue.

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• How to get the IP or hostname of the computer that the user is connected to his office with view 4.5

  How to get the IP or hostname of the computer that the user is connected to his office with view 4.5

  Is this even possible and server display does not store this information?

  Best regards, Najtssob

  This information is stored in the registry of the virtual office. For more information, see this page: use the VMware View Client information.

• How can I connect to the internet through the dial upward through the computer another internet connection?

  If you want to tell me that MS will not support Windows 2000, please do not post. The computer on which internet Wi - Fi Connection has Windows Vista Home Basic on it. The computer that has WiFi but I want to test its dial-up access windows 2000 top. It has WiFi with utility that is necessary. It includes 12 Opera browser. As a resort last, if it is not possible at all means, ultimately, let me know how to connect to the internet through another computer via the telephone line through Internet connection sharing or network connection. Any help will be greatly appreciated. Remember, this is on the internet. Not on whether or not Microsoft does not support Windows 2000. If you tell me how it is not supported, please do not post. Internet connection will be between the two modems and two computer on Windows 2000, it has a LT Win modem and the Vista Home Basic has a CX110 in generation something like this modem. I ask this question is because my land line will not dial a number. I would like to test a dial, and if you tell me how it's slow, I use DC Unlocker to a broadband speed, so it won't be slow. Any help will be greatly appreciated. Windows 2000 has an Ethernet port.

  Hello

  1. are you referring to Windows Server 2000 or Windows ME?

  If you are referring to Windows Server 2000, please help the professional community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  http://support.Microsoft.com/ph/1131

  If you use Windows ME, visit the below mentioned link.

  http://support.Microsoft.com/kb/234815

• AppPortal error: remote access to the server is not enabled

  I'm lost on this one.

  Using the full client of AppPortal on a Win7 64 bit machine (version 8.0 of the customer)

  Double-click the icon, download authenticated - published applications show, then double click a published application, the end user receives:

  Remote access to the server is not enabled.

  This happens only on a single computer

  From this profile of users on the given computer I can MSTSC on the same server without problem

  The error also follows the profiles on the given computer.

  I have closed the Antivirus and Windows Firewall and still can not get this to work.

  Even uninstalled and reinstalled the client.

  From my computer, I can easily log in as this user.

  Customers get automatically configured through an XML file.

  After installation, I tested this laptop and he always gave the same error.

  I ended up him to give me the phone for a few hours.

  Uninstalled the version that was there (build 8.0.0.forget) and scoured the Windows Explorer for all left overs (a little here and there in user profiles and delete).

  Then scoured the registry for expressions; vWorkspace, Quest Software and Provision Networks and remove all instances

  Reinstalled all THE SUCCESS with the new connector to our servers (8.0.306.1427)

  Thanks for the help Dave

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Someone else can run on the computer that I use.

  Someone else can run on the computer that I use.

  Your comments 'tolérable Sun' and 'easy assistance' are not understandable, could you please clarify?  If you are worried about someone on the Internet access to your PC, you must have the software firewall (Windows Firewall) and equipment (router).  This combined with the password will be the bulletproof 99% of your machine.

• Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Original title: problems of residential group after system recovery

  I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

  Hello

  Please follow the methods and check the issue:

  Method 1:

  Open the homegroup troubleshooting utility:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Why can't I access my homegroup? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  For reference:

  Homegroup: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

  Method 3:

  See the steps in "include a folder shared in a library" from the link below:

  Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  I hope this helps.

• Windows Media Player error "Windows Media Player cannot access the file. Is the file may be in use, you won't have access to the computer... »

  When you try to download an audio conference on Windows Media Player class, the following notification: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. I was able to download in the past but now cannot. Any suggestions?

  In WMP, find the tab "Tools", "upper task bar", Search tab options when pressed.

  In the new properties window, change the tabs, connections would determine internet

  speed adjustment... Change all.

• Command BACK to find the MAC address of the computers that are connected with any windows Server

  Y at - it a DOS command to find the MAC address of the computers that are connected with any windows Server

  Usually, net view command is used to display computers on a particular network.

  To find the MAC address, it is best to ask the question here:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• BlackBerry Smartphones Blackberry Destop Software has no software for the device that is connected

  I just bought a Blackberry Curve 8310.  I downloaded the desktop software and I wanted to update the software. When I do this it is said that the Destop software does not have the software for the device that is connected.  Help!

  Want to update to?  If you just bought it, it is likely that he is already up to date as far as business is concerned.  If you want the most recent update, then click on the link below:

  http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/151886-latest-OS-8310-4-5-0-108...

• I have an active instagram account but I can't access despite the fact that my user name and password are correct.

  * Original title: INSTAGRAM BETA

  I have an active instagram account but I can't access despite the fact that my user name and password are correct.

  How can I fix?

  Help, please.

  You will need to contact Instagram.  We have no knowledge of their systems