Removable clip?

Similar Questions

• How to remove clips on external drive with fcpx

  Hi all

  Using the latest version of fcpx.  I went to store stuff today in order to free up space on the external drive that contains all my data of fcpx.

  To do this, I deleted unused takes.  So I select a bunch of clips > right click > move to trash > empty trash > fact.  Or so I thought.

  After doing this for a while, I was wondering how much space I had erased on the external hard drive so I click on 'get info' and find it strange that I didn't win any space at all.  Then in fcpx I I tried to right click on a clip of a decision-making > reveal in finder and I can see all the other clips I had "deleted" always there on the external hard drive!

  Can someone explain to me how to remove clips on an external drive in fcpx?  Also is there a simple way to fix the confusion I have now?  Basically, fcpx displays the content exactly as I want it to be on the external hard drive, it just does not actually all that...  Please don't tell me I have to manually locate and delete each clip - there are hundreds!

  Much help appreciated

  When you say that your clips are on an external drive do you mean that they are in a folder outside the library? If this is the case, yes they must be deleted manually.

• How to replace a part broke on the Clip +?

  I use Clip + gym. Simply, I clip the player on my shorts. I don't want to use the cuff. Recently, the spring that holds the clip broke. I had a chat with Sansa. They confirmed this broken clip on the player is not replaceable.

  Are there similar items out there that I can stick to the player?

  Recommended Sansa armband for the clip. I hate 17 bucks plus S & H.

  Go to a dollar store and get a small tape measure or a bunch of liquidation that has a small plastic or a belt clip steel on it (or any other cheap device with a belt clip that can be removed). Remove clip belt needed for this device. Use a nail or nail Board file and smooth the broken area on the Clip + to create a flat surface. The replacement of clip on glue. A bit of work, but this should fix it!

• Clip + does not accept the song title or album edits

  When I try to change the information in the title of a song or an album on the Clip + when you are connected to the PC it shows up correctly as long as it is still connected to the PC. When unplugged and read on the Clip + it appears simply as a bunch of numbers and letters. If I make the change on my PC first and then remove Clip + enter and drag and drop PC all edited version is fine. Any ideas?

  Thank you very much for your detailed explanation. Sorry it took me awhile to recognize your answer, gone for a few days. I always put my Clip + auto detect as you thought. I never really knew what that assumed this auto and pertained to detect would do the right thing. I note that mt newest Clip of Sport doesn't have a setting mode but I can edit entries in internal and external, without the same issues I described in my Clip +. Really, I use WMP with my Sansa stuff, but the version that I run for reading is WMP 12. So if I understand correctly I need to set the mode of meteorological service of the Canada? Right now my Clip + is empty, then I'll experiences.

  Thank you very much!

  Beachromo

• RemoveChild on the buttons remove movieclips

  Hello

  I've been going crazy trying to do my little flash site to work. I used the removeChild script to remove clips on the stage when you click on a button. When I test the first button clicked load the appropriate movieclip and it unloads any film playing (in this case, it is the content of House), but no other buttons then work after having included the first button that previously worked. It's like the removechild deletes completely. My script is lower and any help woul; d so very appreciated:

  B1.addEventListener (MouseEvent.CLICK, playhomebutton);

  function playhomebutton (e: MouseEvent): void {}

  homecontent. Play();

  }

  B1.addEventListener (MouseEvent.CLICK, removeGallery1);

  function removeGallery1(event:MouseEvent):void {}

  If (gallery.parent)

  gallery.parent.removeChild (gallery);

  }

  B1.addEventListener (MouseEvent.CLICK, removevideo1);

  function removevideo1(event:MouseEvent):void {}

  If (video.parent)

  video.parent.removeChild (video);

  }

  B1.addEventListener (MouseEvent.CLICK, removematerials1);

  function removematerials1(event:MouseEvent):void {}

  If (materialsmovie.parent)

  materialsmovie.parent.removeChild (materialsmovie);

  }

  B2.addEventListener (MouseEvent.CLICK, playgallerybutton);

  function playgallerybutton (e: MouseEvent): void {}

  Gallery.Play ();

  }

  B2.addEventListener (MouseEvent.CLICK, removeHome);

  function removeHome(event:MouseEvent):void {}

  If (homecontent.parent)

  homecontent.parent.removeChild (homecontent);

  }

  B2.addEventListener (MouseEvent.CLICK, removevideo2);

  function removevideo2(event:MouseEvent):void {}

  If (video.parent)

  video.parent.removeChild (video);

  }

  B2.addEventListener (MouseEvent.CLICK, removematerials2);

  function removematerials2(event:MouseEvent):void {}

  If (materialsmovie.parent)

  materialsmovie.parent.removeChild (materialsmovie);

  }

  B3.addEventListener (MouseEvent.CLICK, playvideobutton);

  function playvideobutton (e: MouseEvent): void {}

  Video.Play ();

  }

  B3.addEventListener (MouseEvent.CLICK, removeHome3);

  function removeHome3(event:MouseEvent):void {}

  If (homecontent.parent)

  homecontent.parent.removeChild (homecontent);

  }

  B3.addEventListener (MouseEvent.CLICK, removeGallery3);

  function removeGallery3(event:MouseEvent):void {}

  If (gallery.parent)

  gallery.parent.removeChild (gallery);

  }

  B3.addEventListener (MouseEvent.CLICK, removematerials3);

  function removematerials3(event:MouseEvent):void {}

  If (materialsmovie.parent)

  materialsmovie.parent.removeChild (materialsmovie);

  }

  B5.addEventListener (MouseEvent.CLICK, playmaterialbutton);

  function playmaterialbutton (e: MouseEvent): void {}

  materialsmovie. Play();

  }

  B5.addEventListener (MouseEvent.CLICK, removeHome5);

  function removeHome5(event:MouseEvent):void {}

  If (homecontent.parent)

  homecontent.parent.removeChild (homecontent);

  }

  B5.addEventListener (MouseEvent.CLICK, removeGallery5);

  function removeGallery5(event:MouseEvent):void {}

  If (gallery.parent)

  gallery.parent.removeChild (gallery);

  }

  B5.addEventListener (MouseEvent.CLICK, removevideo5);

  function removevideo5(event:MouseEvent):void {}

  If (video.parent)

  video.parent.removeChild (video);

  }

  Here's what you should have: http://www.kglad.com/Files/forums/test5.fla

  Compare it to what you have.

• Try to make a tutorial, audio loops, destroy.

  I try to do a video by splitting the different clips and then remove the errors, but the audio removed clips is still, help?

  Looks like you need to download a free audio editing software and edit your audio files to exactly the required length. Then put your tutorial. Do a Bing search on "audio editing software.
  B Eddie

• Windows search option is not working does not correctly

  Let I'll get "A Singh. In previous times it opens all the files, images, songs, remove clip associated with aalami singh, but now it is not shown. Please take corrective action against it.

  Hi karim,.

  Sorry for the late reply.

  Run the utility to search and indexing and see if it makes a difference.

  Also, tell us if there were any changes made before this problem on the computer. Do not respond if this is not enough.

  Thank you.

• Problems with the program monitor for 20 to 90 seconds with project started in first CC2014 using CC2015

  I'm just finishing an important project for first Pro CC2015 and it tests my patience. Whenever I do an edit simple ripple and transitions program window to view side-by-side, CC2015 PP becomes somewhat insensitive for anywhere between 20 and 90 seconds. Sometimes it does not recover at all. When I say it's a bit insensitive, I mean I can always move clips, remove clips, or manipulate the clips in any way I want on the timeline. But the program monitor just sits on that same side-by-side view. The side-by-side never displayed the images while ripple editing is performed. The source window, audio mixer and lumetri litters all stop working. But they recover before the window of the program.

  This project was launched in 2014 CC and we should never have improved while in the middle of this project, but now it's too late to go back. It does this on two PCs at work and my PC at home. I started a new project, and no problem with changes to the ripple. Although there are minor, other performance issues, more generally I'm not happy about this day with first CC 2015. I also found a CC2014 project that will not export the correct proportions using CC2015, but just, we returned to the 2014 project to continue working on it.

  Number for ripple editing, eventually everything comes back and still works, but only once so far. Only once, however, my PC completely frozen and had to be returned. I built this PC at hand and never charge anything on what I have needed for my work. This is the first time that this PC has frozen more than 3 years that I used it. Sometimes, a program crashes, but never the entire system.

  Did anyone else out there having this problem?

  MY ADVICE: Finish the projects of CC2014 on CC2014! Stick with new projects with CC2015. or just hold off on upgrading.

  Hi Lisa,

  Disable "Composite overview for Trim" in the timeline view settings and see if that helps to run.

  

  Your Advisor not to switch versions of the programs in the middle of a project is the RIGHT HAND RULE of THUMB of video editing. + 1 for your advice.

  Thank you

  Regalo

• How to create a layer of ranking?

  Hi, I am new to Speedgrade and need to create a layer of ranking that I presented a fade on a slope of primary to compensate for a change in exhibition see what it effects each elementary or secondary school year I put on after. This was no problem when I found diapers that seemed to be a much better idea but the classification Schedule tab is grayed out because I used the direct link between the PP and the button for a layer of classification does not seem to do anything, to push or drag. Dose - anyone know what I am doing wrong?

  

  Happy to help you. This program is INCREDIBLE... but he got a very different "paradigm" of the interface which works very well once you have learned and it work a number of hours, and oh, spent two full weeks on Creative Cow & Lynda dot com & so on... the people who created this built and he remade and re-built it and all did a wonderful job , but... documentation of how he can do all the stuff for it, and how to use it... was never an immediate need.

  Using the direct link command called VERY different process than SpeedGrade using "Native" mode DL, Sg is currently working within your project file PrPro... and they don't want not Sg to be able to do much to the timeline, this is why the timeline of any sequence is "locked" in the Official Journal. You can't do 'edition' stuff, like add or remove clips,... all respect the timeline itself. Only things that affect the appearance of this timeline/sequence. In a process of Sg 'native', where you create the timeline within the Sg or take an EDL (list) and re - connect to files of clips in sequence of the EDL, Sg creates its own project files... an IRCP file. You can do all sorts of things in this timeline.

  So... to create a new layer or follow the sequence/timeline, you MUST go to PrPro and add an 'adjustment layer. Click on the "new item" icon at the bottom right of the project Panel box; choose "new adjustment layer" and make it drag in your sequence, then space needed.

  Now... a little about works of the thing of layers in Adobe applications. The bottom layer in the Panel (bottom right of the screen) aspect sees your clip in its entirety. It's the ONLY one. You make some changes to this primary, then maybe create an another primary top for various changes. THIS primary only sees the output of primary underneath and affects the image that he is "submitted" upwards by this lower layer. Now do a upper secondary to that of say, to change some colors in a narrow band of senior middle tones. This layer is once again these changes just to 'image' as adopted upward by the layer just underneath. Reorganize your layers, you WILL get surprising different effects.

  Layers of ranking are the same... they see what happened to 'up' for them to the clip below, but... AFTER all the work you did on this clip directly. Change the work of the layers in the appearance of the original item Panel and your ranking top layer should also some changes because the image approach until he changed.

  It is very logical that you get used to it. However, it can throw you for very perplexed loops at the beginning.

  The speed with which you can go from PrPro Sg to PrPro to the Sg of... it is very easy for Sg earlier in the editing process and use models of workflow radically different that was required. I work in the Official Journal... LOVE it's so exciting to see what we can do with it...

  Neil

• Deletion of video moving object (use duplicate or Roto brush?)

  Hello

  I had a really hard time trying to remove clips moving objects. I am attempt to disassemble head out of the straighter statue, but could not find an effective way to do... When I use the clone stamp, she keeps track, but I can't seem to blend in realistically, given that the color of the sky goes like pans right claw. I also tried to use a cut-out image of heaven and who followed, but who could not blend as well...

  
  If anyone has any suggestions for this problem, I would be very happy. I have this same problem with a few other clips as well.
  Thank you
  G

  So I downloaded your video and took a look. To replace the head in the second figure on the left, I simply moved frame 250, duplicate the layer film, used the Clone Stamp to replace the head by Sky giving lots of filling, value paint paint on all chassis and paint to the entire timeline is extended. I also applied layer > time > Freeze Frame in the clip. Then I wrote before the first slip so that I could use a mask to be cut precisely around the neck. I then added a null value to follow movements in the comp and gave a quick run movement to the images pick up a few points on the second figure of the left who lived below the neck. I ran a path of motion, applied the path of motion for the null value, then related the pre-comp to the null so that it would follow the movement of the camera.

  Took about 10 minutes. Here's a CS6 project file that uses your footage. You need to replace the images in your computer and then it should work.

  You can use the PSD that you created instead of all the paint and motorhomes. IOW, if you replace the demo by the PSD you made to the appropriate image then calls on your mask and related DSP to null, everything should work perfectly.

• Withdrawal of a MovieClip in a statement when the reactivation of an application.

  Trying to get the code checks to see if a movieclip is present and if it is then remove it when the user leaves (or back) on the application the device (through a phone call, menu press etc.).

  In my application when the user quits the application, they receive the possibility of recovery from the same point or will the first screen.

  If a clip is located on the screen then and the user takes over then it is not a problem.

  If a clip is on the screen and clicked restart this is where the problem occurs and I get an error (or nothing, depending on the encoding options different I tried).

  My goal here is to have the system, find the clip, and remove them when the application is reactivated via the restartF function. Refer to the section of code below.

  • There is no problem when I only have the items blue.
  • There is no problem when I only have items in Blue and green.
  • The problem occurs when the code is in its entirety; Blue, Greenand orange.
  • I get the following error when I click on the restart button:

  TypeError: Error #2007: child parameter must be non-null.

  at flash.display::DisplayObjectContainer/addChild()

  • Made of the anther: all variables for each color are reported in different time periods:
    

  For example:

  Image 1 (this would represent statements in blue)

  var mywordGrumpy:vocabulary_Grumpy = new vocabulary_Grumpy();

  var mywordIncline:vocabulary_incline = new vocabulary_incline();

  I reduced the problem to the restartF function in the code below:

  Item code:

  Adds screen pop - up and request that they would like to resume or restart.

  function onComeBack(event:Event):void

  {

  NativeApplication.nativeApplication.systemIdleMode = SystemIdleMode.KEEP_AWAKE;

  If (! modalW)

  {

  modalW = new ModalW();

  addChild (modalW);

  modalW.x = - 97;

  modalW.y = - 8;

  modalW.resumego.addEventListener (MouseEvent.CLICK, resumeF);

  modalW.restartgo.addEventListener (MouseEvent.CLICK, restartF);

  }

  on the other

  {

  addChild (modalW);

  }

  }

  Triggered by reconnecting and brings the user to where they left.

  function resumeF(e:MouseEvent):void

  {

  removeChild (e.currentTarget.parent);

  gotoAndStop (so.data.currentFrame, so.data.currentSceneName);

  }

  Triggered by restarting and directs the user to the main screen. If statements remove clips if necessary.

  function restartF(e:MouseEvent): void

  {

  If (addChild (myPlayCredits))

  {

  removeChild (myPlayCredits);

  }

  If (addChild (myPlayAbout))

  {

  removeChild (myPlayAbout);

  }

  If (addChild (myPlayAuthor))

  {

  removeChild (myPlayAuthor);

  }

  If (addChild (mywordGrumpy))

  {

  removeChild (mywordGrumpy);

  }

  If (addChild (mywordIncline))

  {

  removeChild (mywordIncline);

  }

  If (addChild (mywordOodles))

  {

  removeChild (mywordOodles);

  }

  removeChild (e.currentTarget.parent);

  gotoAndStop("1","MainScene");

  }

  What I am doing wrong?

  I found the answer:

  Variable declarations were not on the same frame as the fi/statements then. I solved the problem by adding (for each variable):

  var mywordGrumpy:vocabulary_Grumpy = new vocabulary_Grumpy();

  var mywordIncline:vocabulary_incline = new vocabulary_incline();

  var mywordOodles:vocabulary_oodles = new vocabulary_oodles();

  This solves the problem! At the time where variables were called they had not been declared, so they had no value, so the error message.

• What I need to fix error 1034?

  It is a question about good programming practices.

  The outlet box tells me that a constraint failed. I know not why it does, but it does not matter in my program.

  I have a removable clip, and when the clip is removed, it checks to see that movieclip, it was dropped on top of.

  
  If it fell on top of the scene (or a clip that is not defined), it gives me an error of constraint. But I don't need to react to the scene or other objects, so is it important? Or should I find a solution so that I get more than the error?

  Ambari-

  It is best to not cause the error because the Flash Player may not always be so nice of you. Who knows 1 day in the future, this may fail not so silently and things could freeze.

  If you post the code that we might be able to help.

  Sean

• Cannot click on buttons inside draggable movieclip.

  I have a removable clip, mc_PI on the stage in which I have another movieclip, mc_PIcontainer in which I load an image.  Then, I place a few buttons, btn_Ant1, btn_Ant2, etc. inside mc_PI.

  mc_PI hangs out just fine within the limits that I said, but I can't click the buttons that are inside mc_PI.  I need the buttons inside the mc_PI, because I need them to drag as well as the image in mc_PI.mcPIcontainer.  My code is:

  ///////////////////
  Dragging.
  ///////////////////
  var container: MovieClip = mc_PI.mc_PIcontainer.createEmptyMovieClip ("container", 1);
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("images/PI.jpg", mc_PI.mc_PIcontainer.container);

  function onLoadInit(mc:MovieClip)
  {
  mc.forceSmoothing = true;
  MC._quality = "BEST";
  }

  mc_PI.useHandCursor = false;
  mc_PI.onPress = function (): Void
  {
  startDrag (this, false,-910,-1769, 1, 36);
  }

  mc_PI.onRelease = mc_PI.onRollOut = function (): Void
  {
  stopDrag();
  }

  
  /////////////////////////
  Buttons.
  /////////////////////////
  mc_PI.btn_Ant1.useHandCursor = true;
  mc_PI.btn_Ant1.onRelease = function (): Void
  {
  trace ("clicked mc_Ant1");
  }

  to check click parent1 child1, use:

  {parent1.onRelease = Function ()}

  {if (parent1.child1.HitTest (_xmouse, _ymouse))}

  do everything.  the user has clicked Child1

  }

  }

• More elegant conditional statement?

  Hello

  Is there a more elegant way than a conditional to do the following?

  I have a removable clip.  It contains a ComboBox and a color picker.

  I mean Flash - if the user is using the combobox control or the color picker, do not allow dragging.

  I did it for the comboBox - in my grabMe function, I've implemented a conditional that tells Flash, if, after having caught the mouse is not within the comboBox control, and then allow dragging.

  If (evt.currentTarget.mouseX < 165 | evt.currentTarget.mouseX > 209)

  My next plan was to add the coordinates of the color picker x in the equation, but I was wondering if there is a more elegant way to do it?

  See you soon

  Shaun

  You can probably stop the mouseevents detected by the combobox and colorpicker controls from spreading into their listener functions.

• How do a film attached to slide with its parent company / not move independently.

  Hi there, I was hoping that someone can help me.

  I would like to fix a clip to a removable clip (with A3). I introduced a clip using startDrag() - all fine work. But I would like to be able to dynamically place a clip on the inside so that it drags too. I got it partly working - you can drag the original clip around and clip attached (using aadChild) moves too. But if I take the clip attached instead of the original item moves independently.

  Is it possible to get a clip inside the adjustable clip and fixed in place and does not move when you try to drag it.

  See you soon

  View the code that you use to assign the activity slide as well as the addition of the child to the object that has the activity of drag are entrusted to him.  Looks like you might be assigned the startDrag the event.target instead the event.currentTarget.