Removable storage to access folder is missing from the group policy under Administrative Templates\Systems

Similar Questions

• Accessories folder is missing from the Start Menu

  Hello - I just bought a new CPU with Windows 7 Home Premium installed.  When I started to use the system, I know that the traditional Accessories folder which usually includes tools system and other files/folders was in my Start Menu.  After using the test for some time and the installation of many new programs, I noticed that the folder is missing.  Is there a way to get this back in the start without a system restore, because who will cause losing me my programs newly installed what I read on other threads.  Thanks for your comments.

  You are right that the system restore can cause you to have to reinstall your newly added programs.  Here is a possible alternative:

  Restore previous Versions of a file or folder
  1 - click on the Start button, then click on the "All programs" link at the bottom.  Choose "open all users".

  2. in the window that opens, right-click on the folder programs and then choose "restore the previous Versions. The Properties window may take a while to load in all copies of old available in this folder.  Is cool: these versions are in the same place as the restoration of the system of backups, but they allow you to restore individual files rather than your entire system :)

  3 - Click on an older version of the file from a date when you know the Accessories folder was still there, then click on 'Open' and look around.  From there, you can with the right accessories backup button and paste it into your programs folder real (that you opened in step 1).

  I hope this helps.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• How can I correct a problem accessing my firewall settings because the Group Policy client does not connect to windows?

  I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you

  Hi Sheldon,

  Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.
  You might try to tell scientists on TechNet on your question to see if they have a better answer for you:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Definition of access a single device, from the Group of GANYMEDE

  Hello

  Here's my situation: I have a Lantronix device and two groups of users who need access using Ganymede (ACS 5.6).  I don't want to put all the users in a group because many of the users would then receive access to other restricted devices.

  Basically, I need to combine peripheral access 1 - 10 but Group B only able to access devices 1.

  I've been reviewing the authorization policies, but I'm not clear exactly where to go.  Any help would be grateful.

  Thank you.

  Daniel

  daniel.m.williams1,

  I don't know how the ACS 5.6 Menus have changed compared to 5.4 ACS (us still have but began to abandon to ISE 2.0 for GANYMEDE). But I'll throw my idea anyway and hopefully give you some progress. I'm not familiar with the Lantronix devices but they are configurable with GANYMEDE?

  Here's how I'm going to try to solve this problem in ACS 5.4. Make sure that you also have approriate profile of Shell and the sets of commands in the authorization below rules.

  1. users and identity stores > identity groups > create Group A and B > save.

  2. users and identity stores > internal identity stores > users > create users > when creating users, assign them to their respective membership in step 1 group (Group A and B) > save.

  3. users and identity stores > identity store sequences > create identity store = Local for example > in additional recovery search attribute list, select users > save.

  4 policy elements > Session Conditions > network Conditions > device filters > filter device create Group A = > tab select an IP address then check mark peripheral IP > add the ip address of the devices > filter device create Group B = > tab select an IP address then check device IP > add the ip address of the devices > Submit.

  5. political access > Access Services > create Access Service > identity = Local to step 3 > authorization > customize > add filter device and group identity > click OK > create an authorization rule 1 > select device filter = Group A > select a group identity identity of Group A in step 1 > click OK > create an authorization rule 2 > select device filter = Group B > select a group identity identity of Group B in step 1 > click OK

  HTH

  Please note and mark the correct comment if you find it useful. Thank you *.

• MSIMN.exe is missing from the Outlook Express folder. I have XP SP3 and IE 8.

  MSIMN.exe is missing from the Outlook Express folder which has 11 files it contains.  OE has never been installed.   I have XP Pro SP 3 IE 8.

  I bought a Dell 5 years computer and it works well. I have no e-mail program, and none has ever been installed. It seems that I only have Outlook (not installed) but I really want/need from OE 6.   MSIMN.exe is XP and is not downloadable from Ms.  Help!

  It may be a hidden file.  Make sure you have these active under control panel | Folder options | View.
   
  And go to start | Run and type (or copy and paste):
   
  "C:\program files\outlook express\msimn.exe".
   
  and including the quotes.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  MSIMN.exe is missing from the Outlook Express folder which has 11 files it contains.  OE has never been installed.   I have XP Pro SP 3 IE 8.

  I bought a Dell 5 years computer and it works well. I have no e-mail program, and none has ever been installed. It seems that I only have Outlook (not installed) but I really want/need from OE 6.   MSIMN.exe is XP and is not downloadable from Ms.  Help!

• Scan HP is missing from the folder of the application

  I reinstalled my HP Photosmart 2610 and it works but all the software that you access the MAC application folder are missing.  The only way to access the printer or scanner's system preferences.  How to me software added to the application folder?  I would try to uninstall and reinstall but missing uninstall as well.

  Indeed, all the features are no longer available.

  You can scan using picture Capture, preview or printing & scanning:

  http://support.HP.com/us-en/document/c03550518

• Icon 'Remove hardware safely' is missing from the notification area

  I just reinstalled Win7 X 64 business but found that the icon 'Remove hardware safely' is missing from the notification area when I plug a USB key or external HARD drive (they don't work either by the way, I can view files in them no problem), I tried the solution of workaround suggested in http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/safely-remove-hardware-icon-missing-and-cant-eject/e9fda0a2-c308-4853-bf1d-a3926ff0fcd1?page=1&tm=1299855382970#footer , but it does not resolve the issue, I don't see the USB stick or external HARD disk in the dialog 'remove hardware safely '. The only way I can eject a USB device is click on the drive in windows Explorer and select "eject" while even "eject" is not available for an external HARD drive

  Does anyone know how to troubleshoot it?

  Hello

  See if they help you:

  References to Vista also apply to Windows 7.

  Start - type in the search-> CMD bar find top - make a right click on - RUN AS ADMIN

  (You can copy and paste the line below to the command prompt - it is case sensitive)

  Rundll32.exe shell32.dll, Control_RunDLL hotplug.dll

  Press enter

  Remove the icon of USB device missing from the taskbar
  http://www.techf5.com/archives/safely-remove-USB-Hardware-icon-missing-from-taskbar/

  Restore missing or disappeared safely remove hardware icon
  http://www.Raymond.CC/blog/archives/2007/12/30/restore-missing-or-disappeared-safely-remove-hardware-icon/

  Remove device icon lost
  http://en.kioskea.NET/FAQ/Sujet-2501-safely-remove-hardware-icon-lost

  --------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ======================================

  If necessary check the latter:

  How can I remove hardware safely in Windows 7? (via the shortcut)
  http://windows7themes.NET/how-do-i-safely-remove-hardware-in-Windows-7-via-shortcut.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• My Panel of libraries is missing from the drop down window. Where can else I access it? Is this normal?

  My Panel of libraries is missing from the drop down window. Where can else I access it? Is this normal?

  Lisa,

  Please check if the AI CC 2014 update is applied or not. Check the desktop creative cloud for all application pending update.

  Thank you and best regards,

  Mohit Gupta

• Windows 8 does not not log on screen, all black dekstop, explorer.exe, disc missing from the Task Manager

  Hey. I am a newbie in this forum. And I really like to make my PC more 'me' even though my parents and brother told me that my PC did not differ from how difficult. But, I still like my PC... ^ ^
  But my PC encountered a problem in my birthday (March 8, ehehe just FYI). Its a terrible birthday gift: (...) Oh, there. Its all started when I accidentally install a skin pack or win 7 in my PC 8 victory. There is nothing wrong with installing proggress except a notification which inform on win 7 Starter has not installed correctly. :( Well, I ignored, first. But after I have it reboot, my dekstop went all black but it still can open the Task Manager. And then I try the system restore. It did not work properly. The only thing made worse. Somehow, my "(le seul compte dans mon PC) DELETED account." In fact, the log on screen consist only of the ease of access and power button with backgorund optomistic. Where are the data of the user, I mean a place where we inserted the password? XC its make me super bad mood. And after some restoration system with various restore points, I restarted my PC in safe mode successfully. Yippie, its worked perfectly in safe mode. I created a new account in safe mode. I thought that my problem more but no. and the bad news is that there is only one user account (a new one) in the journal on the screen! It'll be better I have the new account very well work, but it didn't! The dekstop always all black with no taskbar and it's the same problem as the first.
  I am not really confusing. What should I do? Should I remove a skin pack safe mode? or reinstall win 8 in PC COUNTER? Or do something that you already know the guy?
  Help me. I am so irritated by this problem. In any case, I want to ask one last thing, you prefer something after me or just think it was a charitable organization? Well, I just want to know. And I'll do my best to show my appreciation once you help me. I am so TROUBLED even if today is my birthday! I want a big anniversary with neither party. But its seems no big birthday. Please, help me. His will probably be my MOST BEAUTIFUL GIFT to a person who I know in internet. If you need something detailed about my problem, ask me. I need your response. :") SURE ME MY CRAZY MOM, IF SHE KNEW IF I AM WRONG IN MY PC AGAIN.

  Oh, there. The explorer.exe does not start in normal mode, but it works fine in safe mode. Also, I discovered that the disc is missing from the Task Manager. :) Help?

  Wish you a very happy birthday, Damaris.

  Of course, I can understand the situation you're in right now, and it's a shame. I will be happy to answer your query and try my best to offer my help as a gift for your birthday.

  Let me ask you;

  1. What happened when you tried the system restore?
  2. What was the last time that the computer worked well?
  3. What security software is installed on the computer?
  4. Remember to no particular change in the computer before the show?

  The issue may be due to any dispute of third party software, virus or any system or missing files / corruption. Let's try the methods below and check the status.

  Method 1: Since you are able to start the computer in safe mode without any mistake, I you suggest to start the computer in safe mode and then perform the clean boot to avoid software conflicts.

  Step 1: Start the computer in safe mode (as you are able to start the computer in safe mode with the steps you tried).

  Step 2: Perform the clean boot

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3: Run the tool File Checker system in case where any system files are missing or corrupted.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Enter in the right edge of the screen and then click on Search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on Search. Type the command prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Not close this command prompt window until the audit is 100% full. The results of the analysis will be posted when this process is completed.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• yellow folder icons missing in the Bookmarks Manager

  yellow folder icons missing in the Bookmarks Manager

  Default theme of 22.0, 22 FF.
  22 FF, 20.0.1 compact Classic theme
  W7 sp1

  I have more yellow folder icons in the Bookmarks Manager. How to make a comeback?

  Thank you

  Favicon changer is no longer totally compatible and is is more updated.
  Removing it solved the problem.

• I used the functionality of bookmark successfully for some time, however, just reciently I can't locate the function 'organize bookmarks '. It seems to be missing from the usual list of options.

  Have been using Firefox Bookmarks for awhile. Just noticed recently when I open the bookmarks that everything is there except the option to 'Organize Favorites '. I tried to rename a folder, but two names - organize bookmarks is missing from the top of the list.
  Is this good, unusual or the result of a virus or what?
  Should I reinstall Foxfire. I don't want to lose all the files.
  Appreciate any advice. THX

  In the Firefox Orange button > bookmarks > show all bookmarks > organize etc.

• Stop and run option is missing from the Start Menu.

  Original title: Administrator group of experts.

  On the Admin Panel when I want to close I normally press start and the "closing". However the button turn off disappeared and only shows button "quit". In addition the 'run' button is gone as well. How to restore it back to normal?

  It will help with these situations... and, this lesson, I've added a few new commands to my answer of registry file generic copy/paste for these kinds of things:

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, because there is no Group Policy Editor in XP Home and that really doesn't tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• Program volume control missing from the taskbar.

  MY VOLUMN CONTROL ICON IS MISSING FROM THE TOOLBAR. I TRIED TO CHECK THE BOX IN THE CONTROL PANEL, BUT IT'S ME GIVES AN ERROR MESSAGE "YOUR VOLUME CONTROL PROGRAM IS NOT INSTALLED" I FIXED USING XP DISCS, BUT IT IS NOT YET HERE. THIS IS PART OF THE OPERATING SYSTEM. I HAD ALSO LOST MY CALCULATOR AND GAMES. I HAVE RE-INSTALLED CALCULATOR AND ACCESSORIES SINCE THE ORIGINAL DISC GAMES ARE BACK BUT STILL NO VOLUMN CONTROL.  ANYONE KNOW WHAT THEN?

  The sndvol32.exe file is one of 3498 files that are monitored by the Windows File Protection System (if it works).

  Assuming that your volume control was previously working and you have uninstalled not really things...

  Even if you manually delete c:\windows\system32\sndvol32.exe, Windows File Protection should quickly and silently substitute a backup copy and put a message similar to the following in the XP system event log:

  Event type: Information

  Event source: Windows File Protection

  Date: 16/06/2010

  Time: 11:57:49

  Description:

  File replacement was attempted on the protected system file c:\windows\system32\sndvol32.exe. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.0.

  See the date and time of this event?  I just deleted my file sndvol32.exe moments, and it is replaced almost instantly (no necessary CD in XP), so so he could go "missing" in the c:\windows\system32 folder and it must be replaced would require an effort unless something is wrong (which it probably is).  You can only delete even on purpose.

  Calc.exe is similarly - it requires some effort or other malfunction so he could come in fact really missing which means that something is not somewhere - if it worked before.

  Why don't search you your system for the file and see if it is in c:\windows\system32 or not.  If it's not and it worked before, you have another problem or something is wrong.

  Before you try to replace the file that should never be missed in the first place, you must first of all decent scanner for malware (since this problem with the sound control panel is such a common condition of malware),then when the scans are complete and clean, difficulty of problems.

  Do a few scans for malware, then when it's over difficult problems:

  Download, install, update and do a full scan with these free malware detection programs at:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• "Send to desktop" missing from the context menu of Explorer

  I have a new install of Windows 7 pro, but I worked with her for a few weeks for some programs to run. I just realized that I can't create a shortcut for the Office in the normal way, with a right click and "send to"---> desk. "Send to" is present in the first Panel to right click, but the "office" is missing from the Panel following if you selected "send to."

  I created another profile and the 'office' is, as appropriate, when above sequence is started.

  What could be wrong, or more importantly, how can it be corrected?

  I see another post in this group with instructions to create a new profile and copy that to her. I can do that, of course, but when I do there always seems to be something missing, so if there is one solution (other than a restaurant), I would be happy to hear about it.

  Thanks a lot for the suggestions, links, explanations, etc.

  Jack

  How to remove and restore the value default Windows 7 send to Menu items
  http://www.SevenForums.com/tutorials/45421-send-context-menu-remove-restore-default-items.html
   

• Mac 0sx 10.7.3 set updated to OS x Lion 10.7.2 How to remove a free app ' Israel free toolbar' from the toolbar. He sits alone on the toolbar immediately under the bookmarks bar.

  Mac 0sx 10.7.3 set updated to OS x Lion 10.7.2
  How to remove a free app ' Israel free toolbar' from the toolbar.

  It sits alone on the toolbar immediately under Bookmark bar.
  

  See:

  • http://KB.mozillazine.org/Uninstalling_add-ons
  • http://KB.mozillazine.org/Uninstalling_toolbars