Similar Questions

• How to connect a video camera (not a webcam), in a way that Flash player sees as webcam

  Dear all,

  I'm working on a project of interactive/augmented reality for a show, where viewers trigger a video by sitting and standing at some point in a room (like the BBC Frozen Planet). My problem is that the image of the webcam we used to capture the audience is not up to the task and produced a really poor quality image. Now I'm trying to fix a video camera with recorder Mini Blackmagic, but Flash Player (standalone) 17 does not recognize the entry as a webcam. So is it possible to connect an external camera flash takes care of everything? Otherwise, can anyone recommend a great webcam, it's SIGNIFICANTLY better than Logitech Pro 910? Thanks in advance!

  [Move this discussion here]

• BlackBerry Smartphones camera flash lights and blocking unit

  I have the camera set to Auto flash.  Whenever it flashes, it is not just flash - it stays on and blocks the entire system (with the exception of the light).  A battery pull resets the device (including light).  Something about the function of flash is the cause because if the camera does not use the flash there is no problem.  Any recommendations?

  Hi and welcome to the forums!

  Try to open the video camera and using light. All the problems?

  I open the camera, options, change the flash for another option and then save.

  Open the camera again, select the flash option you want and save. Then make a battery

  Pull as shown.

  Let us know how it goes!

  Thank you

  Bifocals

  No data will be lost when you do the following: remove the battery while the device is activated.
  Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.

• 10 IOS on iPhone 6s cannot record video camera?

  Updated two iPhone 6s discovered today that we cannot save emailed MOV or MP4 videos to our camera rolls and recently. The option is missing from the list of options.  Fact they eliminate this possibility, remove MP4 videos in favor, or am I just missing a new setting somewhere?

  Greetings 05Moose,

  Thank you for using communities of Apple Support.

  I see you after the upgrade of your iPhones have recently, you're unable to find saved video of your email. It's nice to be able to properly manage how your videos are stored after download you apps. I can help you with this.

  To save video from Mail, click and hold on the video, until you see the contextual pop-up menu from the bottom. In this window, you should see the "save video".

  In iOS 10, videos saved in your iPhone are stored in the albums of the Photos app section. Go to photo > Albums > videos.

  There is additional information in the iOS 10 User Guide, specifically, this section:
  
  

  Organize photos and videos

  The Albums tab includes albums that you create yourself and albums that are created for you, depending on how you use the pictures. For example, the photos you take with the FaceTime camera are automatically added to the album of Selfies. The other photo albums created include people, places, videos, panoramic, Slo - mo, gusts and screenshots.

  If you use iCloud photo library, all your photos in iCloud are in all the photo album (see iCloud photo library). Otherwise, you will see the film album, which includes photos and videos you took with the iPhone and other sources.

  If you use iCloud photo library, albums are stored in iCloud. They are up to date and accessible on the devices when you are connected to iCloud with the same Apple - iOS devices with 8.1 or later, Mac OS X v10.10.3 or later and on iCloud.comcomputers ID.

  Create a new album. Albums of TAP, tap , enter a name, and then tap Save. Select the photos and videos, and then tap done.

  Add items to an existing album. When viewing the photo thumbnails, press Select, select the items, press Add to, and then select the album.

  Manage albums. When viewing your album list, tap on change.

  • Rename an album: Tap the name of the album, and then enter a new name.

  • Reorganize albums: Tap to enlarge the thumbnail of the album, and then drag it to another location.

  • Delete an album: Tap .

    Note: You cannot delete photo albums created for you, as the people, places and Selfies.

  Mark your Favorites. While looking at a picture or video, press on to add it to the favorite album. A photo or video can be part of another album as well as dishes.

  Hide the photos or videos you want to keep but not show. When displaying thumbnails, press Select, then select the photos or videos you want to hide. Press on , and then click Hide. The photos or videos are moved to the Hidden album.

  Photos and videos are hidden moments, Collections, years, souvenirs, but are still visible in the Albums.

  Delete a picture or a video of pictures. Click on the Photos, click on the photo or video, press on , then press on remove the Photo or video delete. Deleted photos and videos are stored in the album recently deleted on iPhone, with a badge showing the remaining days until the item is permanently deleted from the iPhone. To permanently delete the photo or video before the days expire, tap the item, tap on delete, then remove the Photo or video delete. If you use iCloud photo library, deleted photos and videos are permanently removed from all your devices using iCloud photo library with the same Apple ID.

  Recover a deleted picture or video. In the recently deleted album, click the picture or video, press Recover, and then click Recover Photo or video back to move the element to the film or, if you use iCloud photo library, all photo album.

  To retrieve several photos and videos, tap the album recently deleted, press Select, click on the photos and the videos that you want to retrieve, then click on recover.

  Delete a picture or a video from an album. Tap the photo or video, then press . You can choose to delete the album or remove it from your iCloud photo library on all your devices.

  Have an amazing day!

• Re: Satellite L - how do I connect my digital video camera?

  I have a Canon digital video camera (purchased in 2004). I used it to transfer movies on my other laptop Toshiba, but there is no place to plug in on my new laptop. I used an iEEE1394, but it does not work on this one.
  What alternative is there?

  On start-up the laptop I get a message saying NO TOSHIBA SERVICE STATION WORK and proceeds to solve, but nothing happens.

  Any suggestions pls.

  Hey,.

  What model of laptop you have exactly? Some computers laptops don t have firewire port, but if your camera has a USB port can use this port. AFAIK all laptops have USB port

  > Also on start-up the laptop I get a message saying NO TOSHIBA SERVICE STATION WORK and proceeds to solve it, but nothing happens.
  You should try to reinstall the Service Station, I think it should work. Just download the latest version of Toshiba service station on the official website of Toshiba and install it:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But don t forget to first remove the old version before installing the newer one. ;)

• How can I download pictures FROM computer to my video camera

  I'm trying to put a picture of my computer on a video camera so I can go to the store and have a picture made.  Windows XP

  I'm trying to put a picture of my computer on a video camera so I can go to the store and have a picture made.  Windows XP

  ====================================
  You have a drive internal or external?

  If_Yes_try the following steps...

  Insert the memory card into your Media Player and
  Reach... Start / computer.

  The media player must be recognized as one or
  Most removable disks and each will have a drive
  letter.

  Example:
  Removable disk (e :))
  Removable drive (g)
  Removable disk (h :))

  Left-click each removable disk until you reveal them
  Root directory of the memory card.

  OK... now that you know the drive letter...

  The photo in question, then in the right click menu...
  choose... Send to / removable disk (? :))..) .This expected
  copy the photo on the memory card.

• digital video camera is being recognized in windows xp and windows 7 or a fact now

  Hello world. I hope someone can help me please. I have two computers windows xp professional 32-bit and the other is windows 7, both were working fine until yesterday. My problem is that I can edit software.and they both were captuering fine.and computers just stopped at the captureing even time. It really seems I spend most my time troubleshooting. I just want to enjoy what i ' am doing instead of hating what I like to do. I firewire1394 0n computers. Also, I plug this into a canopus converter box. And he remains in analog mode instead of going digital in. I also have the red yellow white wires that go to the converter for the camera.and of course the small hooks to the converter firewire and 6-pin computer.everything was basically works fine and when windows computer with xp does what I then spent to the windows computer 7 and it's the same thing. I ALSO have the regserve and driver boost software I ran two of them and retried. Please someone that skills tech really good please help. And also is their some software I can get that will keep this where I can capture. Also, I forgot to mention the digital video camera that I use are twice are is oone of mini dv jvc model GR-D71U and the other is GR-DVL815U. If I had the money I would not pay mine. But we have very rough now my wife has lost his job 18 months ago and I am disabled. Please ANY HELP WOULD REALLY BE APPRECIATED. If you have any questions do not hesitate to send * address email is removed from the privacy *

  Hello

   
  You can try to uninstall and reinstall the drivers the most recent and supported applications for your webcam from the manufacturer's Web site and check if it helps.
   
  http://support.JVC.com/consumer/product.jsp?archive=true&pathId=26&modelId=MODL026465
  
  You can also contact your support site for video camera (JVC customer support) and check for any related technical assistance.
  http://support.JVC.com/

• SDRAM error a video camera and pray portable computer

  Hello

  I have a 16 GB sandisk Extreme. I've been working successfully in my video camera.

  After 20% shooting, camera reports errors and the card cannot be read.

  When I put the card in my laptop it prompts "format?

  I think that the card has become corrupted.

  Q1: can I get data / videos of this map-if yes how. I tried to scan with Rescue Pro deluxe, and it doesn't seem to be able to read anything. This is the best software for recovery?

  Q2: If I format the sdram memory, it will totally wipe the card and then I won't be able to recover the data, or I'll be able to analyze with pro deluxe grab the videos?

  Thank you

  Ian

  Problem solved.

  So here's how I solved this and some suggestions for Sandisk / panasonic.

  So the scenarios is as follows, the video recorder not turn off on a few occasions where she was placed in the bag and registered 2 massive records. My thought is that it corrupted the disk header.

  Whenever it was designed SDram video camera, the camera flashed an error with the card. When I put it in a Windows system, I asked a disc format.

  So on advice form one of the techs at work, I used Linux, linux.

  I created a USB bootable from this site web http://www.sysresccd.org/SystemRescueCd_Homepage

  Then started from the USB on a relativley new portable (i.e. more recent SD card probbaly)

  Once the linux system has started and I put the card in the card reader for laptop, linux was able to read the disk is full.

  Why linux reads the formats of microsoft disk I can't explain better than microsoft.

  I would say that Sandisk create a Test case to see what happens when sandisk extreme tent complete whole disk and especially using a Panasonic VCR.

   

  I hope this helps others.

   

  all the best

  Ian

  PS - Sandisk RescuePro CD (not free) I downloaded these tools and could not get the application to read the disc.

  There are several versions and was kindly pointed out by LC technologies various utilities.

  IM always shocked at how linux was able to read the disc without problem.

• videos and flash running slow

  I never had this problem before, I do not download new programs, but from the latter, any video really taxes my computers processer and accuses my computer, not youtube, DVD, videos uploaded, streaming video, animated flash videos, all seem to have this issue now.

  Some videos flash lag so that a 2 minute video can take up to 10 to play, its to the point where a lot of flash if I want to watch it or play a flash game, I let the game load then look for the file in temp. Internet files and run it through my Media Player (media gom)

  I had a sinking problem subtitles, so I had to download a new multimedia player for just about any video that will use the subs

  I use a computer toshiba laptop, 4gigs of ram, amd turionx2 64 processer (s) running windows vista

  Hello Toko Gamma,

  I suggest you delete temporary Internet files from your computer:

  1. click on start, and then type %temp% in the search field.

  2. Select and open the Temp folder on your computer.

  3. delete all the contents of this folder.

  Note: Some files may not remove because they are already in use. You can ignore these files.

  Run the defragmentation of drives on your computer:

  1. open the Disk Defragmenter by clicking the Start button, tap all programs, accessories, click System Tools, and then click Disk Defragmenter.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click on defragment now. `

  Refer to this article for more information for more information on this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-performance-by-defragmenting-your-hard-disk

  If nothing works, I suggest that to update the drivers for your graphics card.

  You can see the underside of section which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also contact the computer or device manufacturer for the latest drivers for your video card.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Video camera blackBerry Smartphones upgraded to version 4.5 now does not work

  I have a Curve 8330 and updated the software to 4.5. Now I have no video camera if the camera works fine. Any ideas? Thank you!

  Kieran

  Well, that's interesting. I removed the Documents to Go, which I didn't originally. Now, I have my video back. Weird. Besides, I am a newbie of Berry. I'll teach

• MSG for error blackBerry Smartphones 9650 video camera.

  BB bold 9650 6.0

  Verizion

  When you try to take a video, the camera starts, but when you try and register it gives MSG: error unexpected, impossible to record the video.

  I tried several soft and hard reboots and continue to spread this message.

  The video worked when I got on the phone several months ago... can still take pictures and record... but not video... Help!    Thank you

  Open your video camera and without press registration, press the Menu key > Options and scroll to the bottom, which is the default place to record your videos? It should be your press card.

  So, my question is, is your card support works well and you can access it ok?

  You can try another reboot once more?

  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

• transparent video in Flash 8 Pro

  Hi all
  
  I'm having a problem by creating a transparent video in Flash 8 pro for use on a web page.
  I want to do is to have a web page that has a video on it (using Flash) of a person walking on the page, but the majority of the video is transparent and the only part that you see is the person walking around.
  I know you've seen examples, as shown on the website of Studio 8:
  http://www.Adobe.com/products/Studio/experience/
  This example shows a large site entirely in Flash, but you can still accomplish all of this without the entire site in Flash.
  
  The way I understand the process (in a nutshell) be is like this:
  (1) turn the video on a green screen
  (2) import video video editor (I happen to have only adobe elements 2.0 at my disposal first)
  (3) remove the green of the video which should create an alpha channel
  (4) video export
  (5) video import in Flash choose custom options and specifying the On2 VP6 video codec, and check the box "encode alpha channel.
  (6) to publish your videos and the web page from flash and view on the web
  
  I did everything above, but when I finally see my video on the web, or through Flash, I still have a bunch of black background. (The scene of the flash document background is white too, btw.) It seems that I'm not clearly define the alpha channel in the video or the format that I use does not support an alpha channel. I can't understand. I tried to export the video as .avi and .mov, but neither one import in Flash w / transparency. I can't find anything that explains how do this any more either in the documentation for Flash or Premiere or on the web.
  Can anyone help?
  
  Thank you
  VIC

  Good, solved my problem.
  This can be applied to other video editing software, but I found that it works in Adobe Premiere (Pro and elements).

  The problem is that after I had removed my green screen of the video, I wasn't not choose the right options in the export.
  You should export .mov and in your export movie settings, make sure that "Compressor" is set to "Animation" and the "color depth" has the value "million + colors ', NOT 'Millions of colors '. It is the key element to make the transparent video once you import it into Flash.

  For a good tutorial on the entire process, see this:
  http://www.communitymx.com/abstract.cfm?cid=8F805

  Just thought I'd share.
  VIC

• After I updated my mini iPad to IOS 10 my video camera won't let me take videos

  I've recently updated to IOS 10 but I figured out after I updated my iPad mini, my video camera was not working properly. It doesn't let me take videos. They came out blurry. Please tell me how to fix it!

  < re-titled by host >

  your video camera a physical device where you save and import in the ios device or are you talking about the video app on the ios device?

• Change the orientation of the mouse. Click the apple icon, and then select check box on the left. However, this box is covered by a video on the use of the mouse. How to remove the video?

  Change the orientation of the mouse.  Click the apple icon. System Preferences; OK to this point; the area to select 'Left hand' is covered by a video on the use of mouse clicks. How can I remove the video (s) so I can't select 'Left hand' in the box?

  System Preferences > mouse, and then select the tab more moves.

  Then on the left, select: slide between pages

  Click scroll left or right with one finger , and then make your choice.

  You cannot delete the video. This is a demonstration.

• How to remove the video cut in Photos app

  I cut some of my video clips in Photos, and now I want to permanently delete the Junk adorned video.

  Is this possible?

  Not in the Photos - you can export video ready, remove pictures video and empty recently deleted folder and import new video cut to Photos - Photos is a DAM (Digital Asset Management) system and will always keep the original of each digital image

  LN