Remove entry for specific XML (document structured FM) nodes

Similar Questions

• CSCtu30620 - missing validation of entries for specific code functions

  Hi all experts of the ASA

  Please tell me!

  What is DDT?

  CSCtu30620 - missing validation of entries for specific code functions

  I try to get the tool to search for bugs, but no information.

  Kind regards.

  Motorcycle

  Hi motorcycle,

  Bugs search currently shows the speaker note support for this bug.

  https://Tools.Cisco.com/bugsearch/bug/ CSCtu30620

  The bug was introduced proactively to implement control of the limits on a function in the code base that has been discovered to be missed.

  Sincerely,

  David.

• Analysis of Dreamweaver CS5 fatal error XML: an invalid document structure, line: 1, file: C:\User\Tyler\App

  Fatal XML parsing error: an invalid document structure, line: 1 file: C:\User\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configureation\Workspace\Classic.xml

  I have crossed former disscussion forums and followed the recommended steps by removing the file .xml corrupted itself (in this case 'Classic.xml') but imidiatly after when I try to open Dreamweaver once again, I am prompted with the same fatal error including the file that I just deleted. Then I deleted the entire file configures and that did not help either.

  It is also strange that when I followed the path to find the .xml file corrupted at the prompt, the path is different because I can't find the file 'Classic.xml' through 'en_US\Configuration\Weorkspace' e navigation, but I find the "Classic.xml" file corrupted in the file 'configure' file 'Adobe Dreamweaver CS5.

  Im not sure what to do now and I would really like Dreamweaver to the top and running so help please if you can!

  Thank you

  -Tyler

  Step 1: Close DW, go to C:\User\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configureation\Workspace\ and delete this file Classic.xml

  Reopen DW. DW must auto-créer your workspace layout XML file once again. See if it works very well.

  GO TO STEP 2, IF STEP 1 DOES NOT RESOLVE THE ISSUE

  Step 2: Go to the C:\Users\Tyler\AppData\Roaming\Adobe\Dreamweaver CS5\en-US\Configuration and delete the entire folder "SETUP" . Reopen DW. DW should automatically create your configuration file based on pre-defined schemas and configuration options. This will definitely fix your problem.

  Reason for this question: this question would have been caused due to a malformed workspace setup. That can happen due to customizations you have made to the layout / bad permissions of files / bad closing Windows.

  See if these patches does not solve your problem and post your results here.

  See you soon,.

  ST

• How to: display specific Xml entry in AS3

  I have a simple line of code that I'm trying to change to display a specific entry in an xml file:

  AS3 code:

  The first step is to enable the XML object

  AmbientSettingsXML = new XML();

  /*

  With the now active XML object, it is now for you to load an XML foramtted document.

  Any DTD or XLS format will be ignored.

  */

  AmbientSettingsXML.onLoad = myLoad;

  AmbientSettingsXML.load ("settings.xml");

  Before moving off into the program, make sure that the XML document has loaded

  Extract information from the XML file

  function myLoad (ok) {}

  if (ok == true) {}

  trace ("ok");

  trace (AmbientSettingsXML);

  }

  }

  The exhibition traces:

  Ok

  <? XML version = "1.0"? >

  < Parameters >

  < appearance >

  < Event > Streaming Demo 1 < / event >

  < / appearance >

  < / Parameter >

  So the question is, how to display the entry "Event" only? (String)

  Any help is appreciated,

  Thank you!

  var loader: URLLoader = new URLLoader();
  loader.addEventListener (Event.COMPLETE, completeHandler);

  var request: URLRequest = new URLRequest ("yourxmlfile.xml");

  Loader.Load (request);

  function completeHandler(event:Event):void {}
  var loader: URLLoader = URLLoader (event.target);
  var XML = XML (loader.data);

  XML. Child ("Appearance") [0]. Child ("event_title") [0];
  }

• Is it safe to remove the date in the name of the xml document?

  Hi, the iTunes library xml document is titled "iTunes Library" 2015-07-11. Is this correct and problems can occur if l remove the name date?

  L ask because my Sonos system has trouble with importing iTunes playlists and they are suggesting that the document name length perhaps the question.

  Thank you

  This file is a copy of the database (.itl) iTunes created by iTunes, during an update.  The XML version of the library is always called iTunes Library.xml.  Is there is no basis for comment by Sonos, that it may be related to the length of the absolute path of the XML file - where it is on your system?

• Obsolete devices in the AutoPlay list & several entries for the same devices II (how to remove Iphone in Autoplay device)

  I read the article "obsolete devices in the AutoPlay list & multiple entries for the same features" and did what they said on the registry change, but I can't seem to find what I'm looking for.

  I had an iphone and he sold on ebay, now in my autoplay menu, there is my iphone device listed in DEVICES. I would like to remove it, but there is no option to do this. I looked everywhere in the 'managers' and 'eventhandlers' regedit, but I can't find the name of my iphone or whatever it is about the iphone in particular. So I hope that someone could lead me in the right direction and it would be very appreciated. Is there a specific code or name for the iphone in regedit?

  Hi arande1a,

  I would like to know what article you're talking about, please give the link for the same.

  I suggest you try the following steps:

  Step 1: Disable Autorun

   

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) turn off the AutoPlay use for all media and devices check box, and then click Save.

  Restart the computer and check.

  Turn on AutoPlay

   

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) select the game to use automatic for all media and devices check box, and then click Save.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Let us know if you find iPhone mentioned in the following registry key location.

   

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\ device management

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:

  http://support.Microsoft.com/kb/322756

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when loading an XML document using a structured application

  Hello

  I try to load an XML document using a structured application defined in the default structapps.fm

  My code is shown, extracted from the sample code API FDK.

  Problem, I still got the same message:

  "Cannot find the file named e:\xml\AdobeFrameMaker10\file. Make sure that the file exists. "

  Where "e:\xml\AdobeFrameMaker10\" is my installation directory.

  So I guess that govern trying to find the structapps.fm file but can't find it.

  What else can we?

  Does anyone known how elements achieve this simple task using extendScript?

  Thanks for all comments, Pierre

  function openXMLFile (myLastFile) {}

  var filename = myLastFile.openDlg ("XML file choose...", "*.xml", false);

  If (filename! = null) {}

  / * Default Get open the properties. Back so it can not be affected. */

  var params = GetOpenDefaultParams();

  / * Set properties to open an XML document * /.

  / * Specify XML as the type of file to open * /.

  var i = GetPropIndex (params, Constants.FS_OpenAsType)

  params [i].propVal.ival = Constants.FV_TYPE_XML;

  / * Specify the XML application to use when opening the text.

  I have = GetPropIndex (params, Constants.FS_StructuredOpenApplication)

  params [i].propVal.sval = "myApp";

  I have = GetPropIndex (params, Constants.FS_FileIsOldVersion)

  params [i].propVal.ival = Constants.FV_DoOK

  I have = GetPropIndex (params, Constants.FS_FontNotFoundInDoc)

  params [i].propVal.ival = Constants.FV_DoOK

  I have = GetPropIndex (params, Constants.FS_FileIsInUse)

  params [i].propVal.ival = Constants.FV_DoCancel

  I have = GetPropIndex (params, Constants.FS_AlertUserAboutFailure)

  params [i].propVal.ival = Constants.FV_DoCancel

  / * The file structapps.fm that contains the specified app must have

  already been read. The default structapps.fm file is read when FrameMaker is

  open so this shouldn't be a problem if the application to use is

  listed in the structapps.fm fichier.*.

  var retParm = new PropVals()

  var fileObj = Open (filename, params, retParm);

  return fileObj

  } else {}

  Returns a null value.

  }

  }

  Stone,

  According to the "myLastFile" object, the method openDlg may not yet exist (if the myLastFile object is not an object file, for example). And I do not see the myLastFile be necessary anyway, you present a dialog box to select a file to open. I recommend to use the global method of ChooseFile () instead. This will give you a file name as string in the notation of full path, or null if no file has been selected in the dialog box. I'm not sure of what your States of the return value for ChooseFile ExtendScript documentation, but if that differs from what I tell you here, won't the documentation. For example, if you change the first lines of your code by the following it should work:

  function () {} openXMLFile

  var filename = ChooseFile ('choose XML file... ("," ","*.xml", Constants.FV_ChooseSelect);

  While writing this, I see that Russ already gave you the same advice. Use the value of symbolic constant, I stated to use the ChooseFile dialog box to select a single file (it can also be used to select a directory or open a file - but you want control you the logon process). Note that this method allows you to define a directory for the dialog (second parameter). The ESTK autocompletion also gives you a fifth parameter "helplink" who is undocumented and may be ignored.

  Good luck

  Jang

• How to remove a node in an XML document

  Hello
  
  My flex plugin loads an XML document that is passed from the ExternalInterace. I have a list control that displays the data from the XML document.
  
  The XML looks like:
  < document >
  < response >
  < objectlist >
  < list type = "type" >
  < object type = "type" name = "Value name" id = "GUID value1" >
  < params >
  .........
  .........
  < params >
  < / object >
  <! - several items in this list - >
  
  < / list >
  < / objectlist >
  < / answer >
  < / document >
  
  I set the dataProvider of the list to xmlDoc.response.objectlist.list.object
  
  Here, I want to delete one of the object before displaying the data nodes (in other words, I don't want one of the nodes in the document XML should appear in the list).
  
  How can I do this? I couldn't find a way to remove a node in the XML api.
  
  -Gerard

  You can either use the operator 'delete ':
  delete xmlDoc.response.objectlist.list.object [5]
  When the object to delete can be the fifth down (you need to play with your xml code in debugging down actual values) or convert xmlListCollection. The xmlListCollection provides easy methods to remove the offending nodes or you can provide a function filterFunction for the collection that allows you to "hide" the node.

• How to remove the entry for Hot Standby node in the odbc.ini file in Windows 7

  Although I could see the file odbc.ini under c: Windows, there is nothing specific to hot standby node in the file. I use windows 64-bit computer and I have issues with my odbc DSNS when connecting to another application, I need to delete the entry for Hot Standby node in the odbc.ini file based on what I had as a solution to solve the problem. My mistake was "communication error with the connection process. Find target processes while they waiting for answer', when I tried to pull a few tables to a data source by using the ODBC DSN.

  Hi Jay,

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the MSDN Forums.

  I would recommend posting your query in the link below.

  General Windows Forms:

  http://social.msdn.Microsoft.com/forums/en-us/WinForms/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• We are trying to make a quick payment of payment workbench and is "FRM-41830: error in values list of the no entries for payment document column / field.» Payment document format seems good. Don't know what the issue is.

  We are trying to make a quick payment of payment workbench and is "FRM-41830: error in values list of the no entries for payment document column / field.» Payment document format seems good. Don't know what the issue is.

  Found the Solution...

  PPR (profile of payment process) has not been set to check Format selected in the configuration to "Manage the payment Document".

• ORA-19030: invalid method for the schema not based XML Documents

  Hi everyone can u help me please when I am trying to execute query below his throw errror

  DECLARE

  doc xmltype.

  BEGIN

  SELECT

  XMLAGG (XMLElement ("employee",

  XMLAttributes)

                    ' http://www.Oracle.com/emp_simple.xsd ' AS 'xmlns',

                    ' http://www.w3.org/2001/XMLSchema-instance ' AS ' xmlns: xsi ",

                    ' http://www.Oracle.com/emp_simple.xsd

  http://www.oracle.com/emp_simple.xsd'

  AS "xsi: schemaLocation").

  XMLForest (e.employee_id LIKE "EmployeeId",

  Select AS "name."

  e.job_id AS "Job."

  e.manager_id "MANAGER."

  e.hire_date AS "Hire Date"

  e.Salary AS "wages."

  e.commission_pct AS 'The Commission',

  XMLForest)

  d.department_id AS "DeptNo."

  d.department_name AS "DeptName",.

  d.location_id AS 'Place') AS 'Dept')))

  in the doc

  E employees, departments d

  WHERE e.department_id = d.department_id;

  doc.schemaValidate ();

  END;

  /

  The error I get is following

  ORA-19030: invalid method for the schema not based XML Documents

  Yes, Odie meant something like that.

  See how the employee node can now occur more than once in the employees node.

• Is there an API XML document containing a list of functions availble for MapViewer 10.1.2

  Hi all
  
  I'm about to start programming in PL/SQL, calling MapViewer in the process and hoped to use the PL/SQL API. However, I found that the MapViewer version I use is only 10.1.2 and who does not support the PL/SQL API.
  
  I know there is only a document available with the MapViewer client Java, but is there something similar for the XML API? I watched the MapViewer manual, but that doesn't seem to have an A - Z of the functions available.
  
  Kind regards
  
  Tim

  Hi Tim,.
  The XML API is described in Chapter 2 of the user guide MapViewer, which you can download from the web page of MapViewer OTN. Make sure you get one for the most recent version (10.1.3.3). To answer your other question, the Java APIs will be not discouraged. MapViewer currently supports 3 main aromas of API: XML, Java and JavaScript/AJAX. All these will continue to be improved.

  Thank you

  LJ

• Removal of the specifications of customization with Dr.-ip-customizer

  Hello

  I have three scripts of customization in my DR environment:

  

  I would like to get rid of them, because one of the servers no longer exists, and there are two scripts for the other. What I've read, it seems that the removal of the GUI is not a good thing (don't know why), so I tried to use the command 'drop' of the to do.

  So I run the following command to create the. CSV:

  VMware vCenter Site Recovery Manager\bin D:\Program > Dr-ip-customizer - cfg... \config\vmware-Dr.xml - csv d:\prod.csv - cmd generate

  It then creates the. CSV which contains entries for all protected of the VM, but does not list any of the indications for STMTEST. I then changed to remove all the lines containing the entries outside these two virtual machines (so two entries left, one for the shadow-vm-6448 and one for the shadow-vm-11151), and save the file.

  I then ran the customizer again:

  VMware vCenter Site Recovery Manager\bin D:\Program > Dr-ip-customizer - cfg... \config\vmware-Dr.xml - csv cmd d:\prod.csv - drop

  Part of the output includes:

  Deleted CustomizationSpecs out shadow VMs on VC.

  Everything looks good, but my customization scripts are still there.

  I have also tried to manually edit the prod.csv file to add entries manually and re-run the command 'drop '.

  

  Still no joy, the scripts are just going.

  Has anyone encountered this?

  After playing a bit with custom specifications, there are my conclusions:

  1. drop command detaches and removes the custom plug attached to the existing placeholders

  2 drop command deletes the customized specifications that are not attached to any placeholder, but the placeholder with ID and name exists

  3. drop command removes renamed not care or care of non-existent placeholders

  4 command drop do not detach or remove the personalised if you provide a CSV file "base" which was created by 'generate' command. You must provide the CSV file that you use for the command 'create' (with all the properties at the breast).

• global variables for the XML plugin problem

  Hello world

  recently I started working on a dialog box SOUTH, where the user can load the *.xml files in DIAdem.So much my code for the button looks like this:

  ....

  Call the FileNameGet ('ALL', 'FileRead","*.xml")
  Call DataFileLoad (FileDlgName, "XML_Plugin", "Load")

  ....

  And I must say that it works very well! I am able to load all listed in the devices file. BUT when I tried a number of loading devices, I used a global variable, that I defined in the vbscript file that I load the SOUTH since, I've noticed that global variables, I've defined with GlobalDim are not defined in the vbs.:mansurprised of XML_Pluging:

  Then I started to experiment and so far without success, no matter where I define global variables, in my plugin *.xml all not defined! The native commands even and DIAdem functrions does not work. If I run the script in tiara, it shows no errors, but when I use the plugin to open a file, then it gives an error. For example, MsgBox is not allowed.

  I used the plugin example for *.xml, which was published on the Web site of NOR, and I made a few changes. But overall I have it has not corrupted and I kept the same structure:

  Void ReadStore (File)

  Dim XmlFile: xmlFile = File.Info.FullPath
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  'open the file '.
  OpenXMLFile xmlFile

  End Sub

  Void OpenXMLFile (xmlFile)
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  ' Open MS - Xml Parser
  'Create the ActiveX object for the Microsoft XML parser.
  Dim XDoc: set xDoc = CreateObject ("MSXML2. DOMDocument.3.0")

  "Try to load the XML document
  If xDoc.Load (xmlFile) = False Then
  "Failed to load the document XML.
  RaiseError ' unable to load XML document!
  End If

  protected originalLocale: originalLocale = Getlocalte
  "SetLocale" en - us ".

  "The XML document loaded successfully!
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

  '----------------------------------------------
  "Read the header information.
  '----------------------------------------------

  Here, I have read some values of the header and then I loop on all devices present in the file!

  So basically I have two subroutines and that's all.

  SetLocale originalLocale

  End Sub

  So what I am doing wrong? Why global variables and other functions do not work. Is it because there is xml code in the script this way or it's a version problem?

  I use DIAdem 10.2. If I use global variables in other vbscripts, I use to draw curves for example I have no problem. Now I'm no *.xml code and no subroutines.

  I'd appreciate any solution that will make my *.xml plugin to work.

  Hi fscommand.

  It is expected all behavior.  Use XML, as all VBScript DataPlugins, runs in a separate VBScript host of the DIAdem VBScript host.  DIAdem VBScript host adds all global variables green and Red controls global to host Microsoft VBScript standard.  Use VBScript host has its own special abilities (file object, root object), but there is NO access to Globals green or red blanket orders in the reception of DIAdem VBScript.  Your SUDialog runs in a third host VBScript, which is separated from the other two and the other two are not capabilities (command SUDialog callback functions), but the SUDialog VBScript host and VBScript tiara share all global variables green and Red orders overall.

  Normally all blue VBScript commands are allowed in all 3 VBScripts hosts, but in the case of the DataPlugins MsgBox and InputBox functions were especially restrained because the dialogues could cause a lot of trouble with the DataFinder.  In fact, they have been allowed to 9.1 tiara which was the latest version of tiara for the DataFinder appear.

  So, why do you want to pass information between the XML use and tiara?  If you want to use to share information with DIAdem, then you should just expose every piece of information as a new property in the data portal, which can read and use the code VBScript DIAdem.  The path of the XML file is already available inside the use of XML.  What other information in the call VBScript DIAdem do you need to share with the use?

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688) won't install on Windows 7, error code 643

  I guess the first problem I have is that I came across this forum to get an answer to a question from windows 7, and all I can see are XP and Vista of questions and answers.  It's great, but I have the update above installed on Vista (Ultimate x 64).  I can't seem to get installed it on Windows 7 Professional.  When I stopped, he told me do not turn off the computer, because it is to install an update.  But then the update is back.

  Here's the updatelog of windows for the last screen full of lines:

  2009-12-06 17:05:11:783 376 4 c 0 Agent * UpdateId = {9BD35FB2-8618-4F00-B75D-DFD8D7E93278}.100
  2009-12-06 17:05:11:783 376 4 c 0 Agent * bundles 1 updates:
  2009-12-06 17:05:11:783 376 4 c 0 Agent * {6FB0B1F5-03BA-45A2-91F9-2EEE620770D5}.100
  2009-12-06 17:05:11:783 376 4 c 0 DnldMgr * DnldMgr: updating of the regulation [Svc: {7971F918-A847-4430-9279-4A52D1EFE18D}] *.
  2009-12-06 17:05:11:783 4 376 c DnldMgr 0 contacting server 1 regulation updates.
  2009-12-06 17:05:11:783 376 4 c 0 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab:
  2009-12-06 17:05:11:799 376 to THE f00 successfully wrote event to THE health state: 0
  2009-12-06 17:05:11:799 376 to THE f00 # pending download calls = 1
  2009-12-06 17:05:11:799 376 f00 in THE<## submitted="" ##="" au:="" download="">
  2009-12-06 17:05:11:799 376 to THE f00 successfully wrote event to THE health state: 0
  2009-12-06 17:05:11:799 376 aa4 putting featured update notifications.  fIncludeDismissed = true
  2009-12-06 17:05:11:799 376 aa4 No. feature updates available.
  2009-12-06 17:05:11:799 376 4 c 0 Misc Microsoft signed: Yes
  2009-12-06 17:05:11:799 376 aa4 putting featured update notifications.  fIncludeDismissed = true
  2009-12-06 17:05:11:799 376 aa4 No. feature updates available.
  2009-12-06 17:05:11:799 376 4 c 0 PT WARNING: caching of cookie has expired or new PID is available
  2009-12-06 17:05:15:418 376 4 c 0 PT URL for the server of regulation found in the server config.
  2009-12-06 17:05:15:418 376 0 DnldMgr regulation 4 c server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
  2009-12-06 17:05:17:399 376 4 c 0 DnldMgr * call for full rules. 0x00000000
  2009-12-06 17:05:17:399 376 4 c 0 DnldMgr * DnldMgr: downloading new job [UpdateId = {6FB0B1F5-03BA-45A2-91F9-2EEE620770D5}.100] *.
  2009-12-06 17:05:17:430 376 4 c 0 DnldMgr * all update files have already been downloaded and are valid.
  2009-12-06 17:05:17:430 376 4 c 0 Agent *.
  2009-12-06 17:05:17:430 376 4 c 0 Agent * END * Agent: downloading updates [CallerId = AutomaticUpdates]
  2009-12-06 17:05:17:430 376 4 c 0 Agent *.
  2009-12-06 17:05:17:430 376 4 c 0 report REPORT EVENT: {1B2F2AC2-AFAA-4693-A256-E59B96A868CA}-2009-12-06 17:05:10:067 - 0500 1 182 101 {9BD35FB2-8618-4F00-B75D-DFD8D7E93278} 100 80070643 AutomaticUpdates error content install Installation error: Windows failed to install the following update with error 0 x 80070643: update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688).
  2009-12-06 17:05:17:430 376 f00 to THE > # RETURN # to THE: download the update [UpdateId = {9BD35FB2-8618-4F00-B75D-DFD8D7E93278}, successful]
  2009-12-06 17:05:17:446 376 f00 in THE #.
  2009-12-06 17:05:17:446 376 f00 to # END # in THE: download updates
  2009-12-06 17:05:17:446 376 f00 in THE #.
  2009-12-06 17:05:17:446 376 f00 phase of installation to THE adjustment to THE planned at 2009-12-07 08:00
  2009-12-06 17:05:17:446 376 to THE f00 successfully wrote event to THE health state: 0
  2009-12-06 17:05:17:446 376 f00 setting of to THE pending client directive to 'install approval. "
  2009-12-06 17:05:17:446 376 to THE f00 successfully wrote event to THE health state: 0
  2009-12-06 17:05:17:461 376 aa4 putting featured update notifications.  fIncludeDismissed = true
  2009-12-06 17:05:17:461 376 aa4 No. feature updates available.
  2009-12-06 17:05:17:477 376 4 c 0 CWERReporter::HandleEvents - WER report upload report completed with status 0 x 8
  2009-12-06 17:05:17:477 376 4 c 0 WER sent report: 7.3.7600.16385 9BD35FB2-8618-4F00-B75D-DFD8D7E93278 0 80070643 101 x install not managed
  2009-12-06 17:05:17:477 376 4 c 0 CWERReporter finish event management report. (00000000)

  Thank you

  Stan

  TIP: Read the Symptoms section of http://support.microsoft.com/kb/973688.

  Note that KB973688 is NOT a security update.

  (1) do you have an installed application that "uses Microsoft XML Core Services (MSXML) to process XHTML files" and (2) that "generates a lot of requests when it tries to retrieve well known from the definition of the Type of Document (DTD) from a World Wide Web Consortium (W3C) Web server files" and (3) to "these redundant retrieval requests cause the W3C Server block requests DTD?

  If you can't answer YES to all three of these conditions, you do not need to install KB973688 and you can "hide"

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update: Select the installed updates: right click on the Update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates in Win7: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft