HP Elite V2 keyboard: pad digital HP Elite v2 does not work

Similar Questions

• New keyboard on Satellite L500 - 19 X does not work correctly

  Hello

  About a month ago, I spilled pepsi on my laptop and had sent for repair. I came home today and he had a new keyboard installed, among other things. But the new keyboard does not work properly.

  A bunch of key type is close to letters instead. For example, type 'a' gives 'aq1', 'b' gives 'bgt '. It seems to type the letters vertically above. Some work very well.

  Is the new defective keyboard, or is it need calibrated or something? My laptop model is L500-19 X.
  Thank you.

  My advice: don't waste your time on the forum waiting for help. How do give you the right answer to your questions?
  I have only one answer to your question: no, keyboard doesn t need to be calibrated.
  Contact the service provider as soon as possible and ask for help.

• HP PAVILION 15-n071nr: digital keyboard of HP PAVILION 15-n071nr does not work

  everything works fine on this computer with the exception of the keypad - most of the keys do nothing

  1 connect a usb keyboard gives the same results

  2. sometimes by pressing 9 acts as the top and arrow down

  3. sometimes by pressing the 3 acts as the top and arrow down

  any ideas anyone?

  I guess that since the keyboard usb outboard reacted the same the problem is not the computer keyboard - good or bad?

  A possible clue in this area shows looks like on a couple of key tasks - maybe one spill - I read somewhere to burst the CAP key and maybe to clean the area with a cotton swab with alcohol?

  LR7575

  A number of things you said indicate that this could be a really serious problem...

  (1) you said the keys have been colored, and (2) to which to connect a USB keyboard has the same problem.

  If it was simply a minor spill on the keys, then (2) would not be the case, and a connected USB keyboard would work without any problem.

  But, given the second, everything that has been spilt on the keyboard seeped inside the laptop and did damage.

  At this point, your only recourse is to take the laptop to a cell phone of reputable repair shop and have them run diagnostics and, if necessary, disassemble to determine how much damage has been done and what it will take to fix it.

  IF it was bad, you're probably looking at a higher cost to repair than to replace.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Pavilion TS 15 Sleekbook: keyboard HP Pavilion Touchsmart 15 Sleekbook does not work correctly

  Hello

  Recently, the keyboard on my laptop has stopped working. I tried to reset the laptop and do a hard reset, but nothing seems to work. I have to use the keyboard to type on the touch screen.

  When I turn on the laptop, I can type the password without any problem but after about 5 minutes, the keyboard seems to turn off automatically for some reason any. Only by restarting the computer seems to solve this problem.

  Any help would be greatly appreciated.

  @Ammaar,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• 160 GB Western Digital Scorpio HD (WD1600BEVE) does not work for Inspiron 6000?

  Hello

  I have an Inspiront 6000 running BIOS A09, and when I slid my brand new 160 GB Western Digital Scorpio HD WD 1600BEVE ( http://search.dell.com/searchcom_redirect.aspx?c=us&l=en&s=gen&cs=&k=&tdc=7&p=1&rpp=12&cd=2&cat=prod&sfp=product&dtype=product&did=A1199742&redp=http%3a%2f%2faccessories.us.dell.com%2fsna%2fproducts%2fSystem_Drives%2fproductdetail.aspx%3fc%3dus%26l%3den%26cs%3d19%26sku%3dA1199742&redpe=b6f6dcc3-1a33-08b8-81d4-b41a3eff08c5 ) in , there was an error message saying: hard drive not found. When I went into the BIOS, device information, the main hard drive appears as "{none}".

  What should I do, the previous hard drive I was using with this machine had a similar form factor : http://search.dell.com/searchcom_redirect.aspx?c=us&l=en&s=gen&cs=&k=&tdc=7&p=1&rpp=12&cd=1&cat=prod&sfp=product&dtype=product&did=341-2054&redp=http%3a%2f%2faccessories.us.dell.com%2fsna%2fproducts%2fSystem_Drives%2fproductdetail.aspx%3fc%3dus%26l%3den%26cs%3d19%26sku%3d341-2054&redpe=a1d776f8-a664-f60b-55f6-196f729abd08

  I read on these forums that people have got this Scorpio disc to work.

  Help, please

  Thank you

  IS

  
  

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

  My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

  Hello rad trp,.

  Thank you for using communities Support from Apple!

  From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

  I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  See you soon!

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• Satellite C660-11W - Num pad does not work

  Hello!

  I have a Toshiba Satellite C660-11W, which I bought 10 months ago. Since October, the num of my laptop keypad does not work, but when I press the "Num Lock" button, it makes a noise as I had turned on the StickyKeys.

  How can I solve this problem?

  Hello

  Looks a bit bad operation of the keyboard.
  I think that the service technician if you want to initialize the digital keypad function by Test & Diagnostic software and will replace the keyboard to fail the test.

• My built in mouse pad does not work

  My built in touch pad does not work.  How can I solve this problem?

  Hi LisaGreenberg,

  I'm sorry to hear that you're having trouble with the mouse pad.

  Before you start with the troubleshooting steps, I would like to ask you a few questions.

  (1) Windows operating system you are using?

  (2) what is the brand and model of the computer?

  (3) you receive any code or an error message when you try to use the mouse pad?

  (4) have you made no changes before the show?

  Please follow the link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/nl-BE/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Please answer we help you solve the problem as soon as possible.

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• Even with the new keyboard, the keypad 10 does not work

  Just installed another keyboard Microsoft curve 2000 and 10 pad still does not work. I have the number lock and have removed and reinstalled the drivers and still nothing. It's my second keyboard...

  Hello

  Try this: change on Windows 7 accessibility options

  Control Panel > Ease Of Access Center > facilitate the use of the keyboard > uncheck "turn on mouse keys.

  -OR-

  See this thread
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/number-keypad-not-working-in-Windows-7/d73f5e52-ee79-480D-A111-957be58ad7d3

• After turning on the computer, the Touchpad does not work until I have press a key on the keyboard

  Original title: Touch Pad issue

  Hello

  Every time I turn on the computer touchpad does not work (in the form of connection), first I press any key on the keyboard once I press a button and then press the mouse will start to work, I don't know what exactly is the problem... I reinstalled the drivers, checked in services but still the same. Can someone help me on this.

  Kind regards

  NGO

  Hello, NGO,

  Changes were made on the computer before the show?

  Method 1:

  Run the hardware and devices Troubleshooter and check if that helps.

  Method 2:

  I suggest you to return the item and check if it helps:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Let us know if it helps.

• SHIFT does not work keys digital and other cushions.

  SHIFT does not work keys digital and other cushions.

  Try another keyboard.  If it works fine, your must be repaired or replaced.

• SHIFT key does not work on the bluetooth keyboard connected to the Air ipad on ios 10

  the ipad reboots when we use the uppercase key on the air of the iPad. And in some cases, it shows the changing language selection when the SHIFT key is pressed. The keyboard is perfectly fine and works with ipads o

  I also have the same problem.

  I use 2 keyboards, Bluetooth,

  A wireless Apple keyboard - I mean Magic Keyboard

  The other is universal foldable keyboard from Microsoft

  After updating iOS 10.0.1, Caps Lock does not work, but change language or restart the iPad or it's like restarting the application (kick out of the home screen),

  I thought it happened to MS only the product, but when I connected my Apple Magic Keyboard, the same thing happens!

  Difficulty please, Apple!