remove or insert a series of images in a video

Similar Questions

• How to export a series of images in different proportions at the same height

  How to export a series of images in different proportions at the same height?

  I have a slider callery for my Web site. all images must be of 750 Pixels high, that width is not serious.  I have a mixture of images of pandscap and protraite square, I can do the thing as an export or what I have to do it twice?  Once for the long edge and once for shooting edge?

  Thank you

  Yes, you can, but there is a thing for her.

  In the export as dialog boxSelect Widdth & height.

  Then enter 750 pixels in height.

  Place the cursor in the width field behind all the numbers that appear there and with the BACKSPACE key delete the numbers. If you enter "0" it will not accept that. But she accepts when you remove just the field for the width with the BACKSPACE key. The field width will now be just empty.

  When you export then images will have a height of 750 pixels and width will fall variously according to height then / ratio.

  Or alternatively, you can enter 7.5 "in height at a resolution of 100 dpi.

• Backup of a series of images (from a smart camera) in an AVI file

  Hello

  I have a setup of laboratory in which display us deflections of brain cells in a plate well after be pressurized with air of 50ms. I have a smart camera attached to a card PCI IMAQ to acquire images.

  I'm saving the series of images in an avi file, so that I can show deviations in a slow video.

  The way I put it in place at the present time takes an image and stores it in an avi pre-existing (some .avi randomly that I didn't need) format. But here are a few problems:

  1. I would like for the VI create a NEW .avi, rather that saving it in a pre-existing.

  2. now, each image replaces just the previous in the avi file. Avi resulting is a film length of 00:00 with one image (the last frame saw the camera).

  I have what I programmed attachment. Any help would be appreciated.

  Thank you

  B.J. Kim

  University of Michigan

  Never mind, resolved. Simply put the Acquisition of Vision in the smaller loop.

  Thank you

  B.J.

• Persistent for the subtraction of the background image collection (how to get the maximum value of each pixel in a series of images IMAQ)

  Hi all

  I have a system of LabVIEW which takes advantage IMAQ tools and features of the Vision Development Module.  A useful feature that I put in place is to be able to take a snapshot of the video stream and then subtract this single image among the subsequent images.

  What I want to do is to collect a series of images instead of one, and then create a unique image of these frameworks is just the maximum value of pixels in each pixel (a bit like a display persistent).

  It would probably be very easy to be implemented by converting the image to a table and then by doing math number on the table and then turning into an image, but I hope that someone here may know how to use the IMAQ/VDM tools to do this in a way more compact.

  Thank you very much

  MK

  How about using Max comparison IMAQ operation?

• How to install the removable HARD disk in series Predator G

  I am able to remove the HARD drive bracket and see there are 4 metal poles with silent blocks.  I can't understand how to mount the HARD drive in the mount.

  Is there something Acer which shows or describes how to do this?  The plastic is flexible enough to make me able to force the sides apart, but then it can break...

  Thank you

  Lee

  If you need to remove and insert a new HARD drive hot swap Bay, you will need to enlarge the 2 plastic strips on the sides of the HARD drive.

  If you can take a photo and post, maybe I will better understand your question.

• Insert text in an image

  First my windows photo gallery indicates that it does not work.  Second, I try to insert text in an image that I've saved, but I don't know how.  Any suggestion would be appreciated.  Thank you.

  First my windows photo gallery indicates that it does not work.  Second, I try to insert text in an image that I've saved, but I don't know how.  Any suggestion would be appreciated.  Thank you.

  ==========================================
  Maybe the info will help you with the photo gallery:

  The exclusive database may be corrupted.

  Read the following article.

  (944221) freezes Windows Live Photo Gallery
  or does not start
  http://support.Microsoft.com/kb/944221/en-us
  (according to version, database can be
  Pictures.PD4, Pictures.pd5 or Pictures.pd6)

  Rename the Pictures.OLD file will force Live Photo
  Gallery to create a new database on the next launch file.

  Know that the gallery will be as it was the first time that you
  open and some metadata and labels may be lost.

  ===

  No guarantee... but following Microsoft "don't fix" may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Photo and slideshow problems
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  ===

  Now for adding text on the face of a photo:

  This task can be accomplished with Windows Paint:

  Paint tools
  http://Windows.Microsoft.com/en-us/Windows-Vista/paint-tools

  Microsoft Paint - how to add text to digital pictures in Vista
  http://www.ehow.com/how_5841367_add-text-digital-pictures-Vista.html

  ===

  And... the free Picasa software has several options
  to add text to pictures.

  (FWIW... it is always a good idea to create
  a system before you install restore point
  software or updates)

  Picasa
  http://Picasa.Google.com/
  (you can uncheck some of)
  the options on the final installation screen)

  After you download and install Picasa...
  Open the program and double left click
  an image to open the editing functions.

  To add text to the front of the photo...
  choose... Simple retouching / text button...

  "Retouching" features: crop, add text, editing
  http://support.Google.com/Picasa/bin/answer.py?hl=en&answer=93403

• Insert data on the Image

  Hello

  I want to put the image data dynamically?, can someone help me to insert data on the image?

  Its urgent I'm waiting

  Thank you

  I assume you mean the text data. You could just add a textfield over an image by adjusting the XY coordinates. You just check that your index Z is correct.

• Remove the white background of an image

  Hi guys!

  Often when you use the magic wand tool, it's a good job remove the white background on an image...

  Is there a way to calm the whitish glow that remains even after the removal of the background...

  If I add a background color of the test, it shows a whitish glow around the image...

  bookie56

  Hi bookmaker.

  Please follow the below items.

  Fix the tone and color with levels in Photoshop

  Using Photoshop | Adjust the tone and color of the image

  Hope that helps

  Kind regards

  Mohit

• Insert credit self for images.

  He may appeal the block of text next to the image?

  I intend to make a text box to enter in the credit for the images.

  The text box may be empty or say "Grab the credit."

  

  I tried to use the legends but I can't place him as shown.

  Thanks for the help!

  Here is a "quick and dirty" script Totally not tested. Change space, the width and height variables (with comments) regardless of the values that you need in millimeters, or change units of measure to those that you use.

  var scriptName = "Insert auto credit for images",
  doc;
  
  PreCheck();
  
  function Main() {
      var horUnits = doc.viewPreferences.horizontalMeasurementUnits,
      verUnits = doc.viewPreferences.verticalMeasurementUnits,
      sel = app.selection[0],
      gb = sel.geometricBounds,
      top = gb[0],
      right = gb[3],
      space = 1, // space between the image and the credit frame
      width = 5, // the width of the credit frame
      height = 30; // the height of the credit frame
  
      if (sel.parentPage.constructor.name == "Page") {
          var page = sel.parentPage;
          var creditFrame = page.textFrames.add();
          creditFrame.rotationAngle = 90;
          creditFrame.geometricBounds = [top, right + space, top + height, right + space + width];
          creditFrame.contents = "Enter the credit.";
  
      }
  
      doc.viewPreferences.horizontalMeasurementUnits = horUnits;
      doc.viewPreferences.verticalMeasurementUnits = verUnits;
  }
  
  function PreCheck() {
      if (app.documents.length == 0) ErrorExit("Please open a document and try again.", true);
      doc = app.activeDocument;
      if (doc.converted) ErrorExit("The current document has been modified by being converted from older version of InDesign. Please save the document and try again.", true);
      if (!doc.saved) ErrorExit("The current document has not been saved since it was created. Please save the document and try again.", true);
      if (doc.selection.length == 0) ErrorExit("Nothing is selected. Please select an image and try again.", true);
      if (doc.selection.length > 1) ErrorExit("Please select only one image and try again.", true);
      Main();
  }
  
  function ErrorExit(error, icon) {
      alert(error, scriptName, icon);
      exit();
  }
  

• I have more endurance, remove or insert the option pages after upgrade to Adobe DC. How to get back these functions?

  I have more endurance, remove or insert the option pages after upgrade to Adobe DC. How to get back these functions?

  Looks like you may have updated to misapplication. Probably, you have Adobe Acrobat (the full version) and installed Adobe Acrobat Reader instead. If you had "improved" Adobe Acrobat, it would have cost you money. Acrobat Reader is free.

• How to remove the color profile from an image

  The question is how to remove the color profile from an image

  Color fail not in this Document: option to load Photoshop to remove an existing integrated profile but when I save the file, close and open it I always see a color profile in the embedded image.

  Not tried:

  When I clicked on "don't color manage this Document" and click OK and save the document without closing, I see that Photoshop says there is no profile in the image, but once I got close, and then reopen the file it keeps the color profile. How is that possible?

  Use the ColorSync scripting Remove.app found here /Library/Scripts/Remove.app

  Just drag your image to the Remove.app script.

• How can I display a series of images in the same picture frame?

  I am a user of mid-level and recently saw a feature on a website that I would like to incorporate into my own creations. I am looking for a teaching link explaining this process. There is a picture on a published web site. For the right side and left side of the main image are two small pictures: a "triangle forward" and an "inverted triangle". When you click on the triangle before image main change to image #2, and again to the #3 image. By clicking on the left side "inverted triangle" brings the user to #2 image, then the image #1. All the main images are located within the same frame, it's just that you can click back through a series of images half a dozen. It seems easy, but I can't find the right instructions. Can anyone suggest a link or two? Thank you!

  From the code

  
  
  
  

  It's using this script

  http://www.ndoherty.biz/tag/CODA-slider/

  See also

  http://jqueryfordesigners.com/CODA-slider-effect/

• series of images JPEG, animated gif (or wmv)

  Hello

  Is it possible to take some jpegs numbered in the order of 25-50 and an animated gif or a wmv of output?

  Either Fireworks or any other adobe product?

  I don't want to drag and drop images from 50. Something automatic faily would be nice.

  Thank you

  Jerry C

  In Fireworks, choose file > open. Navigate to the folder where the series of images is stored. Press SHIFT and click on the images to select. Check the open as an Animation box at the bottom of the open dialog window and then click the Open button. Your series of images is automatically loaded in the States, ready to optimize and export as a GIF animation.

  Since the images are JPEG, you can experiment with the animation in Flash (SWF) format export. To do this, choose file > save as. In the dialog, give a name to the file. To save a copy as, choose Adobe Flash SWF. Click the Options button to open the SWF Export Options dialog. Once you are finished, click Save. Ta Da! :-)

• Display a series of images on the stage based on the value of a variable

  Hi all
  
  Here's another interesting problem! Well, I have an interactive retention test which is charge of an xml file based on the value of a variable scenario (for example, if script = Architecture, then load Q_set 1, if scenario = history then load something else). Now, I would like to extent this and display a series of images on my stage which will be valid only in the current scenario. Here is my code so far. I thought load a list of images on the beginning of the film (for example, Architecture_list, History_list) and then call them according to the value of the variable of scenario, but I would like to hear what you have to say. Any ideas?

  The answer is a series of managers: one called at the beginning of the movie to fill the lists of the appropriate folders (based on the value of the variable gimage) and the other called next and previous. Here they are in case yu need:

  ---------
  Global gFileList, gImagePath, gimages

  on buildList

  gFileList =]

  -defining the path to images:

  gImagePath = "@images /" & gimages & ' / ' "»

  Repeat with i = 1 to the maxinteger
  thisFile = getNthFileNameInFolder (gImagePath, i)
  If thisFile = EMPTY then exit
  If thisFile = the movie then the next repetition
  types of files = [".pct", ".jpg", ".bmp", ".gif"]
  howManyTypes = count (fileTypes)
  Repeat with thisType = 1 to howManyTypes
  extension = getAt (file types, if thisType)
  If thisFile contains extension then
  gFileList.append (thisFile)
  end if
  end repeat
  end repeat

  Member ("Display"). FileName = gImagePath & gFileList [1] - put the first image in the folder at the appropriate place

  Member ("Display"). Picture = .photo member ("display")

  buildList end

  --------------------
  Global gFileList, gFileIndex, gImagePath

  on nextFile

  gFileIndex = gFileIndex + 1

  If gFileIndex > count (gFileList) then

  whichFile = gFileList [1] - set the image = in the last loaded picture holder
  gFileIndex = 1 - the value of the index to the last trick question

  Member ("Display"). FileName = gImagePath & whichFile
  Member ("Display"). Picture = .photo member ("display")
  updateStage

  -go to the audio issues

  _movie. GB (31)

  on the other

  whichFile = gFileList.getAt (gFileIndex)

  Member ("Display"). FileName = gImagePath & whichFile

  Member ("Display"). Picture = .photo member ("display")

  updateStage
  end if

  end

  Global gFileList, gFileIndex, gImagePath
  -----------------------------------------------------------
  the backfile

  gFileIndex = gFileIndex - 1

  If gFileIndex = 1 then

  whichFile = gFileList [1]
  Member ("Display"). FileName = gImagePath & whichFile
  Member ("Display"). Picture = .photo member ("display")
  updateStage
  Sprite (17) TRUE = FALSE - disable the "back" button

  -gFileIndex = count (gFileList)
  end if

  If gFileIndex > 1 then

  whichFile = gFileList.getAt (gFileIndex)

  Member ("Display"). FileName = gImagePath & whichFile
  Member ("Display"). Picture = .photo member ("display")
  updateStage
  end if
  end

• Add images in the videos?

  Hello, I was trying to figure out how to add an image in a video during playback on iMovie, as when people censor part in a video (playing) and put a safety edge or black bar, can someone help out me? It is even possible on iMovie? If so will you please show me how? Thank you.

  You can use the image based on the photo of the for do in iMovie 10.1.2 (latest version).   Both earlier versions.

  10.1.2 place your image above the time line and select it.  In the toolbar at the top of the screen, click the button that looks like to the overlap of the squares. In the menu on the left, select image in the image.   Your photo will appear as an insert in the preview screen.  You can resize and move around. Then click on the reset button to the right.