Remove the new response window

Similar Questions

• Can I remove the 'New private window' option entirely from the computer toolbar is not yet an option?

  I would like this option completely removed because now it is easy to have two windows open, a private, as usual, and we can watch more easily inappropriate things by quickly closing the private browsing session, so I think I can't control my child activities as easily...

  You cannot change the menu bar on Mac as can be done on other platforms such as Windows and Linux via userChrome.css code or with an extension as the menu editor.
  
  On Mac, the menu bar is maintained by the Mac OS and so out of reach of the adaptations.

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a way to specify which fields are displayed in the "new contact" window in the address book, or at least highlight those that are important to me?

  It would be nice if I could put together the fields in the "new contact" window in the address book, or at least highlight those that I need with bold or a different color. Is there a way? Thank you.

  Thank you for your reply, I tried already with this addon. Unfortunately this would not help me.

• How to remove the new but useless, "buttons links" at the bottom of the default FF start pg?

  By default new FF w/Google is great and thank you too much. Prefer to remove the new button at the bottom of the page links and have more empty space on the page where the new links are currently. The links are already very well for use at the top of the pg in a toolbar. Remove the 6 new possible button links? Thank you.

  Add code to the file in the chrome folder userContent.css.

  • http://KB.mozillazine.org/userContent.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

  @-moz-document url(about:home){#launcher{display:none!important}}

• When Firefox, click on the desktop icon to a new window, all existing windows update first with the new FF window on top; How to keep the other minimized windows?

  Older FF Windows are covered with newer FF with the new FF window on top.
  It wastes time & space monitor.
  It is likely that a simple adjustment somewhere...

  This has happened

  Each time Firefox opened

  Is with version 3.6.6.

  This can be caused by a problem with an extension (Tools > Modules > Extensions)

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium

  WRT54G v.5 will remain not connected to the new laptop / Windows 7 Premium. It works continuously with a cycle detection, connection, loss of connection; detection, connection, loss of connection, etc... The router works through this cycle, basically acting as if I disconnected and then reconnected to the power to reset, it disrupts my Internet connection to my Wired iMac and wireless, another office to the floor. Paid for Linksys support today and through remote access, he put up a new network on my desktop (iMac). After finishing, the problem still exists. When I told him that the problem had not been corrected, he said just wait an hour or two and it should work itself. She, of course, did not himself. Any ideas out there?

  Nevermind - I seem to have solved the problem with a simple firmware. Funny how the Linksys technician support don't think to ask what version of the router I have or suggest that I should try to upgrade firmware first. However, he is quite good at trying to upsell me for a new router instead of trying to help me solve the problem I had. It makes me want to go buy Netgear next time, thanks a lot!

• Funds/wallpapers don't fit down to the size of my screen after removing the Dreamscene for Windows 7 64.

  My screen/origins don't fit down to the size of my screen after removing the Dreamscene for Windows 7 64.  I ran a 32-bit uninstall reg. by mistake and now larger images appear only partially filling to the top of the visible area of the screen.  I have a laptop of Toshiba A505 displaying 1366 x 768 with Windows 7 64. Does anyone know the registry tweaks on how to solve this problem? Thank you very much.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• my shortcut folders disappear and I can't disable the cleanup of unused shortcuts on the new computer windows 7

  my shortcut folders disappear and I can't disable the cleanup of unused shortcuts on the new computer windows 7

  I have a lot of shortcuts I need readily available and it is very annoying when they disappear without my wanting to do.  I spent hours looking for an answer and I can't change the setting on the maintenance of the system 'clean up unused and shortcuts files' - but some missing I have used very recently - in the last week - so no reason for them to be cleaned - I tink im going to send this back stupid computer and get an Apple!

  I never had this problem with windows XP - windows 7 is rubbish if I can't disable this fundamental thing.

  Hello

  Have you made changes before the start of this issue?

  Method 1: The desktop shortcuts disappear in Windows 7

  http://support.Microsoft.com/kb/978980

  Method 2:

  Step 1: You can check if the same problem occurs in safe mode with network.

  Please follow the link on how to start the computer in safe mode with network below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Let us know if that helps.

• Does not update CS5 Production Premium, re-installed on the new PC (Windows 8.1). Cannot read Canon CR2 files.  I have re-installed.  What's wrong?

  Does not update CS5 Production Premium, re-installed on the new PC (Windows 8.1). Cannot read Canon CR2 files.  I have re-installed.  What's wrong?

  Jeff, thank you.  I couldn't update any program in CS5.  It turned out that I had to do a 'update manual".  Not sure why it was different, but it worked.

• How to remove the new window of recent files?

  Since I've updated to the new version of Illustrator, I have had this window. I want to know how to get rid of it, because I often open files Illustrator from the Finder and it opens, if I click on the file I just opened, it asks me if I want to open a new window for her before finally disappearing when I say no. Problem is that it still does, as this time I tried to open the file and it would not clicked open. So I want to get rid of it. I could use it if it was working normally, but for now, it's just a nuisance.

  

  Go to Preferences > general and set it to hide.

• How to remove the defects of window picture Scanner

  Hello

  My first post over the years.

  I recently bought a large dumpster scanner to scan - Mustek A3 USB 2400 PRO - newest technology.

  It's probably a problem of with all scanners that use a (bar) LED light source rather than the old technology "fluorescent tube. 

  I noticed a regular pattern about an inch bars wide, up and down each scan. This appears ONLY if I do a severe contast stretch to almost white. The problem was that the model easily appears on 'dark backgrounds of an image', even after some minor stretching. If I lift the cover with something like a small object 1/4 "thick (for example an eraser) and do a scan of effectively the" space vacuum air "above the flat window, the same model is displayed in the 'empty space' far from the document - so that the stripes are NOT in the document, they are on the glass of the window - or a natural flaw in the way LED bars are made. I cleaned the window of the scanner with glasses drinking, Windex, cleanser and rubbed hard to Polish, in the case where new glass was "scraped" by the vibrations of the cover when shipped to me. I also tried scanning documents to several resolutions, low maximum of 2400 dpi for this model. Nothing helps.

  I seems likely these, about one inch wide parallel strips, are actually the LED bar, perhaps composed of eleven segments of lighting an inch wide LED (on this great scanner model). This is similar to the way in which computer screens portable LCD would show scratches on black screens.  Each LED segment may be just very slightly different in intensity, and there is a "bright streak" to some of these "bar of the edges of the segment. Which would be caused by the light segments LED "not joined is not well enough to produce a luminous tube spaced regularly. The LED light bar "discreet, segemented" is not the same quality of light, as a source of continuous fluorescent light to the old.

  To prove it, I did a scanned image 'air' of full bed (cover of the scanner deleted entirely, in a dark room) as a so-called 'Flat framework'. Then, I scanned a "dark color document (the"black cover inside"surface will do as test)."

  Then, I used Photoshop CS5 "Calculations" in the "DIFFERENCE" mode. It subtracts the flat frame (with just the vertical streaks and bands of an inch), in the test document. Of course, "noise from the window" has been pretty well removed from analysis. AFAIK, there is no other method in Photoshop CS5 to fix the flaw of LED technology for the scans of photos of all sizes. Cannot use "Pattern" filters since it is not a regular pattern as those of offset presses, or any other printed matter.

  Everyone knows about this problem with a scanner flat LED? This does not happen with my Epson Perfection 4880 (fluorescent light)

  I can ONLY use the method of DIFFERENTIATION on a flat frame, if I perform analyses flat full even for small items, since there is no way to differentiate a flat frame 'section', which would be the same size and position as a smaller document (print, etc.).

  A REAL DIFFICULTY would be if TWAIN drivers had a command to run a flat frame and save it in the memory to be broken by simply applying the coordinates of all the new scans of paper. It's like the scanner with a 'default map' for the entire window, and it can then simply use the section that is the same size as the new document, until the user recalibrates the flat frame.

  It is not likely to happen, then maybe a really good feature for Photoshop CS5 update would be to integrate this in the software, under the "IMPORT" of the scanner, or at least to have such an option under "calculations".

  Hope that technicians Adobe read this lengthy post. -All comments and suggestions would be welcome.

  Thank you

  Joe

  Many drivers scanner do a calibration on the flat ground (which has to do with the response from white, and they have a bunch of built-in white calibration) and a black level calibration (for the reflection of noise and glass) as they scan.

  You should probably use subtract blend instead of the difference mode, and you can just use layers instead of the old calculations command (which was how you did these things before the layers).

• Remove the tags in Windows Photo Gallery

  This question is about the photo gallery Windows on a Vista operating system. My question is about the drop-down auto-liste of tags that grows each time you enter a new tag. Handy if you want to use something you've used before but a nuisance if you want to erase it. I figured out how to remove tags on the pictures still on the computer. My question is about the images that have been deleted and is not recoverable. There is always this tag leftover junk that applied to these photos that I deleted. appears whenever you try to add a new tag and resists all efforts to remove it. I contacted gateway computer people since they installed the operating system and got the solutions really wild just to remove the unnecessary tags. I thought that everything you enter, you should be able to delete... just... but this has proved to be a great puzzle. I hate to have to do a restore to original factory specifications and lose everything I've added to this day to get rid of these pesky tags. In addition, it simply repeats the problem unless I have find how to remove the little monsters.

  I hope someone can help...

  Hi Jo,.

  It's a good thing to be careful when you edit the registry.  In your case, as the registry key seems to be very specific to the Windows Photo Gallery, we can export the folder safely we are change.  Be sure to close the Windows Photo Gallery before you start.

  • Click the ball to Start .
  • Type regedit in the box start the search.
  • Navigate through the folders on the left at the following key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows Gallery\Library\PreviewPane\LabelAssignment\MRU photo

  • Right click on the folder MRU in the left hand window and choose export.
  • Give it a file name (no matter what you name it) and save to the desktop.
  • In the right window, you will see keys named MRU00, MRU02, MRU03 etc...
  • Right-click on these keys and click on delete.

  Once you are finished, close the registry editor by clicking the x in the upper right and restart your computer.  When she returns to the top, open the Windows Photo Gallery and see if the tags are gone.

  If you receive errors of ANY opening of photo gallery, simply, do a right click on the file that you have already saved on the desktop and choose Import.  That will undo any changes that we have made.

  Please let me know if that helps.

  Standard WARNING:
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove the skin on windows media player: windows vista running windows 9

  Well, I wanted a new skin on windows media player, I went to the site of the skin and got a new skin.   Then, the player only plays not write.    You cannot see the controls as fast forword or rewind play or pause.  It makes me crazy ha ha wow.  can you help me please.    E-mail address is removed from the privacy *.

  REALLY? Bud, you must return to school. I can't believe Mircosoft hires idiots like you not wonder that our sh! dosent work right t... HE ASKED HOW TO REMOVE THE SKIN TO NOT BE GIVIN LEAK AUTOUR. TELL US HOW TO UNINSTALL MEDIA PLAYER SKINS!

• Remove the upgrade of Windows 10 as an optional upgrade preselected

  I don't want to upgrade to windows 10 and withdrew the notification of upgrade of the taskbar and never asked the upgrade.  Now, he appeared as an optional upgrade screened in windows update and there is no visible way to remove it.  This effectively blocks the security updates without upgrading to windows 10.  How can I get rid of him?

  Terence Kelly

  Hello

  What you need to do here first, is to change the way you receive updates. The automatic updates enabled, the operating system will reinstall the nagware guest who is KB3035583 after uninstalling a step we will take in a minute.

  Then follow these steps:

  1. Right-click the icon of the center of the Action on the taskbar and go to "Windows Update".
  2. In the left menu, click on "change settings".
  3. Change automatic updates to "download updates but let me choose whether to install them".
  4. Click "Save Changes", then "Control Panel Home".
  5. Go to "Programs and features" and click on the link "View installed updates".
  6. Copy and paste KB3035583 in the high-field search right and when it appears below, right click and select "Uninstall". It's a great Setup uninstall can last several minutes.
  7. Then restart and then go back to Windows Update again.
  8. Since you now have different parameters of WU, click on the link if there is no waiting for your approval, which will bring you to the menu where you can decide what to install.
  9. If you see KB3035583 in the list, right click and select "hide update". The box you should checkmark to select an update will turn gray and when you exit WU, these files will be sent in the repository called "Restore hidden updates". You can restore the updates that have been hidden there at any time by clicking on the link, make your selection and click "restore".

  The next step is to edit a registry that will prevent Windows 10 download and installation.

  Press the Windows key + R to start the command run, type: regedit , and then click OK.

  Navigate to: HKEY_LOCAL_MACHINE--> SOFTWARE--> Microsoft-->--> CurrentVersion--> WindowsUpdate Windows--> AutoUpdate--> OSUpgrade

  Click the OSUpgrade key (which looks like a folder), and then in the right pane you should be able to see the four values respectively called:

  AllowOSUpgrade

  KickoffDownload

  KickoffSource

  OSUpgradeInteractive

  Part or all of them will have a value of 1. You need to change those to 0 as you see in the screenshot.

  

  To change a registry value, right-click and go to Edit. In the value field below, transform figure 1 0 a

  Click OK and Windows will add the 0x00000000 (0) itself.

  If it's already a 0 then you don't have to touch it.

  In addition, you must create a value. To do this, right-click on an empty part of the right pane, and then choose new DWORD with the name DisableOSUpgrade-->.  Windows will add REG_ DWORD early, after it is created.

  If inadvertently, you lose the highlight when you create the new value, right click and select Rename.

  Then, right-click of your new value and go to edit. Change the 0 value in a 1 in the value field. Click OK to confirm and exit.

  Reboot, then go to Windows updates. You will now be able to install updates 8.1 without being hassled by Windows 10.

  Credits:Xircal , from here