repair broken CID-String > the virtual disk parent has changed since the child was created.

Similar Questions

• Virtual disk parent has changed since the child was created.

  I recently had one of my virtual machines go down and I couldn't connect to access anything whatsoever, so I rode as an extra hard drive to another virtual machine in order to access the data I needed.

  Once I had finished I he took off the other VM and proceeds to the power on the virtual machine, but I got an error of:

  "The virtual disk parent has been changed since the child was created." The content of the virtual disk ID parent does not match the ID of parent matching the child content. »

  Reason: The virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent matching the child content.
  Cannot open disk ' / vmfs/volumes/4e24c6fe-3c2ad61e-a57c-e4115bbbce6c/SNCTrillium/SNCTrillium-000003.vmdk' or one of the snapshot disks it depends on.

  I read upward through the knowledge base of VMWare on the modified files, but I've never had to do that before and I'm not sure about how to go on this subject as I've never used the vsphere CLI either.

  I am currently using ESXi 5.0.0 with vsphere client 5.0.0. I've attached a screenshot of the error.

  According to the snapshot between SNCTrillium - 000001.vmdk and the basic disk SNCTrillium.vmdk is broken, which means that the basic disk has been changed. I have attached an instant replacement for the SNCTrillium - 000001.vmdk with a fixed string that should allow you to open the virtual machine. However, since I do not know what and how much data has changed on the basic disk, I can't tell you how much data corruption, you will see. So you better take an another snapshot to be temporary once loading hard file attached, in order to ensure the current hard data files cannot be changed.

  André

• The virtual disk parent has changed since the child was created

  Hi all, need your help with this one.

  I deleted two snapshots and now I can not start the virtual machine.

  Get the following error:

  Reason: The virtual disk parent has changed since the child was created.
  Cannot open disk ' / vmfs/volumes/4c483d34-a8c778c4-46a5-001cc460f09e/WEBPDXXXY/WEBPDXXXY_1-000003.vmdk' or one of the snapshot disks it depends on.

  I tried that link but still did not work KB: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 1007969

  I can still see the WEBPDXXXY_1 - 000003.vmdk, WEBPDXXXY_1 - 000002.vmdk and WEBPDXXXY_1 - 000001.vmdk when I browse the data store.

  WEBPDXXXY_1 - 000003.vmdk

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = 59fab513
  parentCID = a4a63bd5
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1 - 000002.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDWEBPDXXXY_1-000003 - delta.vmdk.

  # The database disk
  #DDB

  WEBPDXXXY_1 - 000002.vmdk
  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = a4a63bd5
  parentCID = 0f8995f3
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1 - 000001.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000002 - delta.vmdk.

  # The database disk
  #DDB

  DDB. Deletable = 'true '.
  ddb.longContentID = "ab1b7008e386c884ae920930a4a63bd5".

  WEBPDXXXY_1 - 000001.vmdk

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.
  CID = 0f8995f3
  parentCID = 926f96fa
  isNativeSnapshot = 'no '.
  createType = "vmfsSparse."
  parentFileNameHint = "WEBPDXXXY_1.vmdk".
  # Description of the measure
  RW 157286400 VMFSSPARSE ' WEBPDXXXY_1-000001 - delta.vmdk.

  # The database disk
  #DDB

  ddb.longContentID = "0336846d9f849b4b97ad028f0f8995f3".
  DDB. Deletable = 'true '.

  WEBPDXXXY_1.VMDK

  # Disk DescriptorFile
  version = 1
  Encoding = 'UTF-8 '.

  CID = 926f96fa

  parentCID = ffffffff
  isNativeSnapshot = 'no '.
  createType = "vmfsRawDeviceMap."

  # Description of the measure
  RW 209715200 VMFSRDM ' WEBPDXXXY_1 - rdm.vmdk '.

  # The database disk
  #DDB

  ddb.toolsVersion = "8295.
  ddb.adapterType = "free".
  DDB. Geometry.sectors = "63".
  DDB. Geometry.Heads = "255".
  DDB. Geometry.Cylinders = "13054.
  DDB. UUID = "60 00 C2 92 41 62 5 d 8f-10 59 12 60 53 0 to a8 94.
  ddb.longContentID = "b204c5bc523bbc83c01dd3ed926f96fa".
  ddb.virtualHWVersion = "7".
  DDB. Deletable = 'true '.

  Is there a chance to run ls-lisa from the command line (SSH) in the virtual machine folder and provide the output!

  I ask because I'm a little worried about the timestamp of the hard (May 2011). Depending on the size of the files in the snapshot, it seems that the second virtual disk is not really used by the guest operating system and we could come back manually (by editing the .vmx file) on the resized basic disk (100 GB compared to 75 GB for snapshots) without losing important data!

  If you want to revert manually,

  • delete the virtual machine of the inventory
  • backup and then edit the .vmx file (replace "WEBPDMAPPD_1 - 000003.vmdk" with "WEBPDMAPPD_1.vmdk")
  • Move 3 snapshots in a directory temporary sub
  • Add the virtual machine to inventory
  • create a new snapshot to prevent the current hard files to be modified
  • Turn on the virtual machine

  If everything works as expected, you can delete the snapshot files moved and remove the snapshot created in the Snapshot Manager again.

  André

• Instant restore: the virtual disk parent has changed since the child has been created

  Buenos dias,

  A worm if someone is ha sown con este problema y me can echar UN cable.

  Al trabajar con una maquina virtual en local con el disco en un disco external depuradora, to me broken instant crear of the United Nations (por el disco local creo en lo disgrace).

  Al use esta Máquina in casa, arranco perfectly, claro, pero sin los datos del snapshot.

  Hoy al arrancarla in the oficina ha generated a conflict: "the virtual disk parent has changed, since the child was creates," ha detectado what ha modified the virtual machine after ultima grabación del snapshot, no permite arrancarla.

  Could eliminando el solucionarlo snapshot, pero no puedo perder todo lo as he ido generating information.

  Alguna idea?

  Para eso estamos DiegoPS.

  No olvides close the discusion marcandola como respondida.

  Saludos,

• Help, please! Snapshot after expand VM, virtual disk parent has changed since the child was created

  OK, here's the situation, (maybe you can find a lot of discussion on this one)

  I have a vmware server running SuSE Linux Enterprise Server 10. I use as its host vmware ESX 3.0.1.

  I realize that I need to extend the drive because he must have more space disk for the production server. Then I resize the disk using vmkfstools x 90 G TARANTELA - TEST.vmdk. The bad news is, I didn't know that the server has a snapshot on VI client. As you know, the error occurred:

  Failed to open the disc

  "/ vmfs/volumes/4652e777-3eb2a038-8fce-0019bb343796/TARANTELLA-TEST-000007.vmdk" or one of the snapshot disks it depends on.

  Reason: The virtual disk parent has been changed since the child was created

  Then I remove the snapshot of the VI client and re-save the virtual machine to inventory, but it may yet open the disc unless I edited the .vmx line file:

  scsi0:0. FileName = 'TARANTELA-TEST - 000007.vmdk '.

  TO

  scsi0:0. FileName = ' TARANTELA - TEST.vmdk.

  It runs as the first time I installed the system, but all the important configuration is in 'TARANTELA-TEST - 000007.vmdk' snapshot.

  Someone there the sollution, how can I do my work of snapshot again?

  Kind regards

  Arfal

  In SL32-AP-TARANTELA - TEST2.vmdk

  change

  CID=dc621992
  

  TO

  CID=ce700012
  

  and

  RW 188743680 VMFS "SL32-AP-TARANTELA-TEST2-flat.vmdk"
  

  TO

  RW 31457280 VMFS "SL32-AP-TARANTELA-TEST2-flat.vmdk"
  

  and

  ddb.geometry.cylinders = "11748"
  

  TO

  ddb.geometry.cylinders = "1958"
  

  in SL32-AP-TARANTELA-TEST2 - 000007.vmdk

  change

  RW 188743680 VMFSSPARSE "SL32-AP-TARANTELA-TEST2-000007-delta.vmdk"
  

  TO

  RW 31457280 VMFSSPARSE "SL32-AP-TARANTELA-TEST2-000007-delta.vmdk"
  

  And then you change the changes you have made to the VMX file.

  Try power o the VM - you will get probably mistakes (inside the virtual machine).

  If this works report back (we are not yet made).

• Please help: the virtual disk parent has changed...

  After a few days of research about this error, I decided that I had to ask for some evidence of your experts to help me recover from this error.

  Thank you!

  It is a small desktop application:

  -Dell T410 esxi Server 5

  -a virtual machine, Windows Server 2003 with 2 discs, no fixed size

  I was help this office by managing services and updates on this Server 2003.  I ran updates on Friday and restarted.  When he came I open vSphere and found the virtual machine does not.  I tried to start it and got the error.  So, it seems I may have the CID issue that needs to be corrected.

  I don't have a direct access to this server so I'm remoting with RDS on 2003 VM server and vSphere on the esxi.  Did I make the right diagnosis and is it possible for me to make the necessary corrections to distance or I need direct access to the server?  Everything I've read has files of people editing CID numbers and it seems that they directly access the esxi server.

  Shows the data store:

  hard 'server '.

  hard 'server_1.

  'server' - 000001.vmdk

  "server_1" - 000001.vmdk

  'server' - snapshot1.vmsn

  I stuck a few newspapers below...

  DISC: Scsi0:0 [OPEN ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' persistent R]
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001-delta.vmdk ': open with success (10) size = 5620404224, hd = 213826. Type 8
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-DSCPTR: open [0]: "Server-000001 - delta.vmdk ' (0xa)
  2012-08 - 05T 20: 00:06.022Z | VMX | DISKLIB-LINK: open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' (0xa): vmfsSparse, 35526656 sectors / 16.9 GB.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-flat.vmdk ': open with success (14) size = 18189647872, hd = 181059. Type 3
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-DSCPTR: open [0]: 'server - flat hard' (0xe)
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-LINK: open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk' (0xe): vmfs, 35526656 sectors / 16.9 GB.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB LINK: DiskLinkIsAttachPossible: incompatibility of the content ID (parentCID f72e60c7! = f05537b3) /vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-STRING: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server.vmdk ': cannot open (the virtual disk parent has changed since the child was created.) The content of the virtual disk ID parent does not match the ID of parent for children's content).
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001-delta.vmdk ': closed.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-VMFS: ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-flat.vmdk ': closed.
  2012-08 - 05T 20: 00:06.035Z | VMX | DISKLIB-LIB: can't open ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' with the virtual disk 0xa flags parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent for children (18) content.
  2012-08 - 05T 20: 00:06.035Z | VMX | DRIVE: Cannot open disk ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk ': the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent for children (18) content.
  2012-08 - 05T 20: 00:06.035Z | VMX | Msg_Post: error
  2012-08 - 05T 20: 00:06.035Z | VMX | [msg.disk.noBackEnd] unable to open drive ' / vmfs/volumes/4f4781a4-15d3bbb8-2681-782bcb6a6964/server/server-000001.vmdk' or one of the snapshot disks it depends on.
  2012-08 - 05T 20: 00:06.035Z | VMX | [msg.disk.configureDiskError] reason: the virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent matching the child content.
  2012-08 - 05T 20: 00:06.035Z | VMX |

  Thanks again for any direction you can provide!

  / r

  John

  The parentCID of the snapshot must match the CID from its parent, as shown in the log file

  "... The content ID mismatch (parentCID f72e60c7! = f05537b3)... »

  Server.VMDK

  CID = f05537b3
  parentCID = ffffffff

  Server - 000001.vmdk

  CID = a2b9ba8b
  parentCID = f72e60c7---> f05537b3

  Make sure you change the file on the host using the vi editor or - if you want to change the file in Windows - use an editor who is aware of the line breaks Unix (do not use Notepad!)

  Once this is done, I highly recommend that you take another cliché before you on the virtual computer. This prevents existing virtual disk files to be modified, so that you can return to this State where you need. After that everything works as expected, consider deleting all snapshots.

  André

• "The virtual disk parent has changed..." "after removing a few shots

  Hey!

  I'm using VMWare Workstation and deleted a few shots via the Snapshot Manager. I used a .vhd Image from the Microsoft Site (Windows Server 2003, x 86). VMWare has created a link to this image at the beginning. I was working on this virtual machine for 2 weeks.

  Now, I have deleted 2 snapshots, including the first snapshot. When I try to start all the existing snapshots the error which is entered in the subject line of this discussion. Detailed error explains that his "cannot open disk 0 - 0000004.vmdk or one of the snapshot disks it costs on.» Reason: the virtual disk parent... »

  How can I access any of the existing snapshots in the future? I read that it is necessary to open the virtual disk images and change the CID of this disk image virtual to who should be the one parent. But how do I edit these virtual disk in windows vista? I have no command line tool that extracts only the first 20 lines of a file so that it will be impossible for me to open a vhdk with 600 or 700 MB. Another problem is that (I don't know why) my virtual disks are splitet in so many parts (I said at the beginning that the virtual disk must be a file, but I think splitet VMWare Workstation it because she had to be converted to .vhd (Microsoft) .vhdk... might be?)

  Here's a screenshot of my file of VMWare this virtual machine sorted by type and sorted by size (for a better overview, I think):

  na ja... Falls die Datei ist - wurde neulich, als VirtualPC platte used sharp available?

  Wenn nein - und nur dann!

  ersetz

  disk-0 - 000002.vmdk

  disk-0 - 000004.vmdk

  mit den editierten aus dem Anhang versions.

  Falls from the dir unsicher bist - nach frag!

  Ulli

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Problem with a VM server: "the virtual disk parent has been changed since the child was created.

  Hello!

  I have a problem with a server that does not start.

  We had a virtual machine running on VMWare Infrastructure 3 with two hard drives and an instant backup of them.

  This machine has been removed from the inventory, but when it has been recreated, the secondary hard drive is mentioned for the basic-disk vmdk
  instead of being referenced to the instant vmdk and used for a few days.

  All changes made after the snapshot, were kept in the delta snapshot file, which is not loaded.

  We are with difficult to reference the secondary disk for the snapshot file. We tried to edit the .vmx and hard disk files
  to correct the CID made reference, but when we try to start the virtual machine, we got this error:

  "The virtual disk parent has been changed since the child was created.

  I think it happens because we made a blow-up of a secondary drive a few weeks after the backup snapshot. We spent 30 GB to 50 GB.
  And because it has been referenced and used in another vm.

  *** Log is attached

  Thank you

  Bruno.

  It is a bad sign

  next step in the usual forest is to use "testdisk" since a LiveCD to set the tables MBR and partition - if possible

• the virtual disk parent changed

  I just did something really stupid and hope someone here could help me...

  I have a virtual host named dev4, that has a snapshot created a year ago.  It has several virtual disks, one of them is dev4 - 000001.vmdk, who has a parent disk dev4.vmdk.

  Today I come to create a new virtual machine named dev5.   My intention was to disparage dev4 and use dev5 moving forward, so I want all my data in the virtual disks of dev4 is available in dev5.

  Now, it's the stupid part.  I added two dev4 - 000001.vmdk and dev4.vmdk (one at a time) to the new machine virtual (dev5) and mounted to them (I was running Fedora in two virtual machines).    It's really successful, but then I can't repeat this process and dev4 won't boot either.  "I got the error message was.

  Details: Cannot open the disc "C:\Virtual Machines\dev4\dev4-000001.vmdk" or one of the snapshot disks it depends on.

  Reason: The virtual disk parent has changed since the child was created.

  "

  Apparently the action to add the dev4.vmdk drive to dev5 or mount in dev5 led her to change.  I have a lot of data in dev4 - 000001.vmdk which are not saved.  Is it possible I could get these restored data?  Right now I can not open this vmdk due the above error.    Any help would be much appreciated!

  Sorry Peter - I guess I was kinda hard...

  It's just that in so many cases users who have encountered a problem with the snapshots do themselves more damage by acting in quick.

  Please read my full vmdk-manual so that you are better prepared next time.

  And now - please read this

  http://sanbarrow.com/VMDK-HOWTOs.html#editvmdk

  We will need it then

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  My Apple ID has been locked for security reasons. I have all the details to recover my account that the account was created by a child of 6 years. How to unlock my account to use the same?

  < email published by host >

  It is illegal for a child from 6 years to create an Apple ID.

  You can take a date-genius bar with Apple and bring the original receipt Apple.

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• Why have I not two selectable organization even when the pack was created in Creative Packager Cloud?

  Hello

  I have a problem when the pack was created in Creative Cloud Packager, there are two selectable 'same' organisation.

  The first one named "Centre professional of the Littoral Neuchâtelois" offered license type ' named ' or 'license of device.

  The other named "Centre professional of the Littoral Neuchâtelois" (ditto) offered only a license type "named license.

  

  My question is why do I have two organization?

  Thank you very much.

  Pellaton Roman

  It seems that your ID is associated with two accounts.

  We have an approval attached and the other has a license of creative teams of cloud (username).

  If you want to check more details about these accounts please contact customer service

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.

• "The current version of the database has changed since... "Error

  Now I downloaded my application at the APEX. ORACLE.COM and my workspace is PSGCA and I have problems with the page 310 - details of the Bill.  How can I get the APEX. ORACLE.COM gurus to look over the page?  I'm having a problem with the part detail of this master-detail page.  Specifically, if I add data or update data to the captain only section, no problem.  This is when I need to update the data on the detail starting with my problems section!  If I add to the start of the line, no problem.  If I add information to a field null, no problem.  The problem arises when I want to change the HOURS/DAYS and COSTS.  He will take the initial value, but if I want to change then I get the error "database version has changed since... »

  No indication of this error would be greatly appreciated!

  Do you guys need for me to add table definitions and sample data.  In the past, I was told that it was not necessary; everything you had needed was the page.

  Is this correct?

  Can I add data and table definitions?

  For some reason that I could reduce it to the format mask on the expenditures column, which has been

  999G999G999G999G990D00PR
  

  When I changed it to

  999G999G999G999G990D00
  

  everything magically started working.

  For people wondering about the PR:

  PR

  9999PR

  Returns negative value in . Returns the positive value with a beginning and end empty. Restriction: The PR format item can only appear in the last position of a model number format.

  Documents: http://docs.oracle.com/cd/B19306_01/server.102/b14200/sql_elements004.htm

  I'm not sure why this particular mask causes. Because checksums are generated, I ran this sql to take a guess:

  select
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw(exp1)) md5_val1,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw(exp2)) md5_val2,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw('1.00')) md5_val1_1,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw('1.00')) md5_val2_2
  from (
  select
  expenses exp1,
  to_char(expenses,'999G999G999G990D00PR') exp2
  from invoice_details
  ) a
  

  which produces this output.

  MD5_VAL1	MD5_VAL2	MD5_VAL1_1	MD5_VAL2_2
  C4CA4238A0B923820DCC509A6F75849B	4DF59D42C9EE6119AEB2ADC95E7B7CF6	41CF2677CC4EC9356DAD8E76DFB87448	41CF2677CC4EC9356DAD8E76DFB87448

  Still not sure, but maybe it's to do with how and when checksums are generated?

  A space of drawing here - as you can see there is no guru, ace or oracle badge under my name, so I'm sure

  I've made changes on page 310, make backup to 24 but probably is not serious because your application is local. Probably no danger of change your credentials and/or remove your application.

  impressive effort on the example. This helps us better help you!

• Currency of the line has changed since the user interface has been made on creating

  Hi all
  
  I'm ' currency of the line has changed since the user interface has been made. " The key to the planned line was oracle.jbo.Key' error on create action. Use case is simple. He saw table and create a button. When I click the Create button, I get this error. Back button of the browser is never used.
  
  The strange thing is that I don't get this error when I run my application on your premises. However, after I had it deployed in real development environment, he started up this error and I do not get this error on other pages.
  
  JDeveloper Version: 11.1.2.2.0 (JSF 2.0)
  Weblogic Version development environment: 11.1.1.6
  
  Kind regards
  Anil

  Same question: do you have the correct version of the runtime ADF your server?

  Timo