Repeat the data used in the State of charge

Similar Questions

• Repeat the statement disorders

  Hi all
  
  Im trying to put in place a training and im not sure how to do it.
  I want a victory statement to appear when images are in a certain place.
  The images are all 100 pixels between them and the first is 50.
  At the moment im using:
  
  -If sprite (1) .loch = 50 and sprite (1) .locv = 50 and sprite (2) .loch = 150 and sprite (2) .locv = 50 then
  -member("label").text = string ("you win")
  -end if
  
  It works fine but I want to add an another seven sprites locations it is another 14 - "sprite (1) .loch = 50" to and it's a very long statement! "»
  
  Can someone arrive at a statement of repetition that might work? I have accumulated my brain to try to do.
  
  Thank you
  Michael

  You could place all the logs and locVs in additional lists and test
  against these values. Something like this:

  on checkSpriteLocations
  Vlist = [50,50,50,150,150,150,250,250,250]
  Hlist = [50,150,250,50,150,250,50,150,250]
  spriteList = [2,3,4,5,6,7,8,9,10]
  totalSprites = spriteList.count
  Repeat with n = 1 to totalSprites
  If sprite(spriteList[n]).loc <> point(Hlist[n],Vlist[n]) then
  output
  end if
  end repeat
  Member ("label"). Text = string ("you win")
  end

  --
  Rob
  _______
  Rob Dillon
  Adobe Community Expert
  http://www.DDG-designs.com
  412-243-9119.

  http://www.Macromedia.com/software/trial/

• Windows 10 improvement - battery and the State of charge is displayed does not.

  For some reason any we have accidentally updated to W10 on the laptop this afternoon. Overall, it seems to work ok, but the only thing that we have noticed, is that the charge battery etc status icon is now displayed in the taskbar right tlower.

  When I plug the charger seems to be detected because I get the battery/charger Acer overlay displayed in the center of the screen for a short time - just like he used to. I don't think this is a feature of Windows, most likely a an Acer function?

  I went into Device Manager > batteries and emit a "Search for hardware changes" and the battery symbol then appeared in the bottom as right task bar usually. Plug and unplug the charger has been shown in the icon so it seems to work and we were 'okay '.

  Then, I thought I had better perform a restart of the laptop to make sure it was really now work and stable. After you reboot, the icon did not reappear!

  Tried the same trick in Device Manager but no luck.

  I did not have any other software upgrades on the Acer.

  I hope someone can help me get this rather vital icon to reappear constantly.

  Yes, it is applicable.

• State of charge of the Apple pencil

  How can we get the State of charge of the Apple pencil and confirm when it is fully charged?

  Slide down from the top of the screen to access Notification Center, then tap on change downstairs. Find the option "Stacks" and press on the + sign next to it. Tap done. Battery display should show you the charge of Apple pencil when he is in charge.

• State of charge of pencil?

  Is it possible to see the State of charge of the Apple pencil?  I use http://bit.ly/joc0zm and, occasionally, just pencil stops working. Thinking that it is http://bit.ly/joc0zm and not the pencil, I quit and restart http://bit.ly/joc0zm but the problem persists. Only when I loaded the pencil has the problem disappeared. If there is a way to see the State of the battery of pencil, I could check. As this is the case, the behavior on the screen is the same, as if I was trying to draw or erase a layer behind that I can see - which leads to layer exhaustive audit in order to establish that it is not my fault, that takes time... only to realize it's stack of pencil!

  Lower the notifications Panel and select widgets, check the battery widget (tap the change button at the bottom of the Panel today to choose which widgets activate). The battery widget shows the iPad Pro battery level and all attached BT devices (or at least those that support sending at the level of the battery of the device connected).

• State of charge of battery signal

  Hi all I am trying to find the State of charge of the batteries inside the service.

  I use this code but no success.

  batteryInfo BB::Device:batteryinfo;

  bool isConnect =
  QObject::connect (& batteryInfo,
  SIGNAL)
  levelChanged (int level, load bb::device:Battery State::Type newChargingState)),
  This,
  SLOT)
  "onlevelChanged (int level, bb::device:BatteryChargingState:Type newChargingState)));"

  =========================

  cancel the Service:nlevelChanged (int level, bb::device:BatteryChargingState:Type newChargingState)
  {
  qDebug()< "battery="" state="" level="" changed##############################="">
              <>
  }

  Please correct me if I'm wrong.

  Thanks in advance.

  I fix my problem

• Use the state machine to fill cluster

  Hello

  I am trying to create a state machine that is running two States, each State has two items up to a Bundle function and in the cluster. I want the two elements of the State first across, then the second State should run and pass the last two items. Currently, I get only the data of the final State. I have one the vi attached.

  Thank you

  Chris

  You don't actually have a state machine.  What you have is a simple loop, and nothing of what is happening in the previous iterations of the loop is spent in later iterations.

  You must create the cluster in the loop itself and maintatin into a shift register.  Use the bundle by name to update the respective elements of the cluster in each picture of the structure of the case.

  

• Tips to remember when using the state machine in queue

  I was able to work through the convert my architecture of State Machine for a BAU, thus eliminating the use of nodes of property/local variables to send data values to my machine of the State, but rather to send through queues.

  I would like some advice/tips on taking to serve perfectly. Especially, "is not to make" things with queues and how to effectively release a queue, etc.. What is the convention when using queues? Thank you!

  V

  
  

• Smart way to save large amounts of data using the circular buffer

  Hello everyone,

  I am currently enter LabView that I develop a measurement of five-channel system. Each "channel" will provide up to two digital inputs, up to three analog inputs of CSR (sampling frequency will be around 4 k to 10 k each channel) and up to five analog inputs for thermocouple (sampling frequency will be lower than 100 s/s). According to the determined user events (such as sudden speed fall) the system should save a file of PDM that contains one row for each data channel, store values n seconds before the impact that happened and with a specified user (for example 10 seconds before the fall of rotation speed, then with a length of 10 minutes).

  My question is how to manage these rather huge amounts of data in an intelligent way and how to get the case of error on the hard disk without loss of samples and dumping of huge amounts of data on the disc when recording the signals when there is no impact. I thought about the following:

  -use a single producer to only acquire the constant and high speed data and write data in the queues

  -use consumers loop to process packets of signals when they become available and to identify impacts and save data on impact is triggered

  -use the third loop with the structure of the event to give the possibility to control the VI without having to interrogate the front panel controls each time

  -use some kind of memory circular buffer in the loop of consumer to store a certain number of data that can be written to the hard disk.

  I hope this is the right way to do it so far.

  Now, I thought about three ways to design the circular data buffer:

  -l' use of RAM as a buffer (files or waiting tables with a limited number of registrations), what is written on disk in one step when you are finished while the rest of the program and DAQ should always be active

  -broadcast directly to hard disk using the advanced features of PDM, and re-setting the Position to write of PDM markers go back to the first entry when a specific amount of data entry was written.

  -disseminate all data on hard drive using PDM streaming, file sharing at a certain time and deleting files TDMS containing no abnormalities later when running directly.

  Regarding the first possibility, I fear that there will be problems with a Crescent quickly the tables/queues, and especially when it comes to backup data from RAM to disk, my program would be stuck for once writes data only on the disk and thus losing the samples in the DAQ loop which I want to continue without interruption.

  Regarding the latter, I meet lot with PDM, data gets easily damaged and I certainly don't know if the PDM Set write next Position is adapted to my needs (I need to adjust the positions for (3analog + 2ctr + 5thermo) * 5channels = line of 50 data more timestamp in the worst case!). I'm afraid also the hard drive won't be able to write fast enough to stream all the data at the same time in the worst case... ?

  Regarding the third option, I fear that classify PDM and open a new TDMS file to continue recording will be fast enough to not lose data packets.

  What are your thoughts here? Is there anyone who has already dealt with similar tasks? Does anyone know some raw criteria on the amount of data may be tempted to spread at an average speed of disk at the same time?

  Thank you very much

  OK, I'm reaching back four years when I've implemented this system, so patient with me.

  We will look at has a trigger and wanting to capture samples before the trigger N and M samples after the outbreak.  The scheme is somewhat complicated, because the goal is not to "Miss" samples.  We came up with this several years ago and it seems to work - there may be an easier way to do it, but never mind.

  We have created two queues - one samples of "Pre-event" line of fixed length N and a queue for event of unlimited size.  We use a design of producer/consumer, with State Machines running each loop.  Without worrying about naming the States, let me describe how each of the works.

  The producer begins in its state of "Pre Trigger", using Lossy Enqueue to place data in the prior event queue.  If the trigger does not occur during this State, we're staying for the following example.  There are a few details I am forget how do ensure us that the prior event queue is full, but skip that for now.  At some point, relaxation tilt us the State. p - event.  Here we queue in the queue for event, count the number of items we enqueue.  When we get to M, we switch of States in the State of pre-event.

  On the consumer side we start in one State 'pending', where we just ignore the two queues.  At some point, the trigger occurs, and we pass the consumer as a pre-event.  It is responsible for the queue (and dealing with) N elements in the queue of pre-event, then manipulate the M the following in the event queue for.  [Hmm - I don't remember how we knew what had finished the event queue for - we count m, or did you we wait until the queue was empty and the producer was again in the State of pre-event?].

  There are a few 'holes' in this simple explanation, that which some, I think we filled.  For example, what happens when the triggers are too close together?  A way to handle this is to not allow a relaxation to be processed as long as the prior event queue is full.

  Bob Schor

• Windows Media Player 11 Date added function - please stop repeating the date for EACH file.

  I have been using Media Player 9, decided to upgrade to Windows Media Player 11, and the only thing I can not stand on Player 11 is how it sorts Date added media files.  In Player 9 when I chose the column Date added, the program would list all the files on a given under a SINGLE date.  With Windows Media Player 11 it lists EACH file with a date so that instead of see Tuesday, December 14, 2010 once and then listing all of the files under it, I see Tuesday, December 14, 2010 about twenty times.  I download podcasts once a week and dump it on my phone, but it's a worry now.  Is it possible to stop Windows Media Player 11 to repeat the date again and again and force him to the date that the list only once?  Think back to Player 9.  Alex

  Hi Alex103,

  It's design in Windows media player 11 and it is also included in Windows Media player 12.

  However, you can uncheck this option, follow the steps below:

  a. open windows Media player

  b. right-click on one of the sorted column

  c. click Choose column

  d. uncheck data added

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer crashed, used the backup to restore, formated instead and charged in the State of origin. any chance to recover photos lost at this stage?

  computer crashed, used the backup to restore, formated instead and charged to the State of origin, no chance to recover lost photos at this stage?

  Hello

  It is a good free program to recover data. but no guarantee.

  http://www.Piriform.com/Recuva

  You may need to contact the data recovery specialists, who are very expensive.

  See you soon.

  p.s., You use your computer, the less chance you have of data recovery.

• Switch to the correct encryption certificate I get the error: "Key not valid for use is specified state."

  Used
  Now cannot open encrypted files.

  When you try to pass the correct encryption certificate I get the error:
  "Key not valid for use is specified state."

  See this http://answers.microsoft.com/en-us/windows/forum/windows_7-security/keeping-passwords-secure-microsoft-policy-on/39f56ef0-5d68-41ad-9daa-6e6019c25d37

  It is as it's supposed to as an anti theft precautions. I mean that data is encrypted, if somebody stole your hard drive and the hard drive boots and the other account it can receive data.

  If you not export recovery certificates and encrypting the data, you cannot redo the decryption.

  http://Windows.Microsoft.com/en-us/Windows/back-up-EFS-certificate#1TC=Windows-7

  If it's a default domain recovery agent. admin area. If it's home, to look for recovery certified you have exported.

  But third-party tools are there if you can remember old password the is to encrypt you can recover. But they are not free... and premium software is not be recommended or guided through support free forum due to the effort of preventing unnecessary advertising.

  You can do you own research about recovering data... just try to get you using the favorite search engine... "Restore access to encrypted EFS format files" or "Advanced EFS Data Recovery.

  Many more free guides will be available... Just keep in mind this is not a method to escape... you must remember your old password at least for decryption in the case where you export a certificate.

• Merge using the statement

  Version: Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  Hello

  I Merge statement that throws an error that it's an invalid statement, but I do not understand why.

  The statement is:

  MERGE INTO tbs_forecasts_archive tfa
  USING  (SELECT  pub_fc.forecast_id
                 ,pub_fc.last_approved_date
                 ,pub_fc.resource_id
                 ,pub_fc.project_id
                 ,pub_fc.cme_system
                 ,pub_fc.role
                 ,pub_fc.forecast_type
                 ,pub_fc.last_updated
                 ,pub_fc.last_updated_by
                 ,pub_fc.old_forecast_id
                 ,pub_fc.start_date
                 ,pub_fc.end_date
          FROM   published_forecast pub_fc
          INNER JOIN tbs_projects ON tbs_projects.project_id = pub_fc.project_id
          LEFT JOIN tbs_areas ON tbs_areas.area_id = tbs_projects.area_id
          INNER JOIN resources ON resources.resource_id = pub_fc.resource_id
          INNER JOIN tbs_teams ON tbs_teams.team_id = resources.tbs_team_id
          WHERE ( tbs_projects.group_id = :P0_GROUP ) AND
                ( tbs_projects.area_id = :P86_AREA OR :P86_AREA = 0 ) AND
                ( tbs_projects.project_id = :P86_PROJECT OR :P86_PROJECT = 0 ) AND
                ( tbs_teams.team_id = :P86_TEAM OR :P86_TEAM = 0 )
         ) pf
  ON     ( tfa.forecast_id = pf.forecast_id AND
           TRUNC(tfa.baseline_name) = TRUNC(pf.last_approved_date)
         )
  WHEN MATCHED THEN
      UPDATE SET  tfa.resource_id     = pf.resource_id
                 ,tfa.project_id      = pf.project_id
                 ,tfa.cme_system      = pf.cme_system
                 ,tfa.role            = pf.role
                 ,tfa.forecast_type   = pf.forecast_type
                 ,tfa.last_updated    = pf.last_updated
                 ,tfa.last_updated_by = pf.last_updated_by
                 ,tfa.old_forecast_id = pf.old_forecast_id
                 ,tfa.start_date      = pf.start_date
                 ,tfa.end_date        = pf.end_date
  WHEN NOT MATCHED THEN
      INSERT (
               forecast_id
              ,baseline_name
              ,resource_id
              ,project_id
              ,cme_system
              ,role
              ,forecast_type
              ,last_updated
              ,last_updated_by
              ,old_forecast_id
              ,start_date
              ,end_date
             )
      VALUES (
               pf.forecast_id
              ,pf.baseline_name
              ,pf.resource_id
              ,pf.project_id
              ,pf.cme_system
              ,pf.role
              ,pf.forecast_type
              ,pf.last_updated
              ,pf.last_updated_by
              ,pf.old_forecast_id
              ,pf.start_date
              ,pf.end_date
              );
  
  

  Can someone explain what's wrong with this statement? It seems that it is a syntax error, but I was not able to find an example that uses multiple tables in select it like that.

  Do I need to provide data and tables?

  Can what additional information I give?

  Thank you

  Joe

  Would be - this pf.baseline_name in your VALUES clause is an invalid reference. TRUNC (pf.last_approved_date) is maybe what you mean?

  Kind regards

  Bob

• Using the statement prepared in adf

  Hi Experts,
  I am confused with the use of a prepared statement in the adf.
  My use case is,
  I have to update a table from every page in my application under certain conditions.
  
  My question is,
  If I have to create the iterator VO mandatory in all pages and calling the createinsert and insert the data into the table or
  
  use a common method in the Application module impl
  who uses a prepared statement (which is not even creating the ViewObject) like

   PreparedStatement st = null;
  String sql = "INSERT INTO hr.departments (DEPARTMENT_ID,    DEPARTMENT_NAME,   MANAGER_ID,   LOCATION_ID) VALUES (seq,?,?,?)";
              st=getDBTransaction().createPreparedStatement(sql,0);
              st.setString(1, name);
              st.setString(2, mgr_id);
              st.setString(3, Loc_id);
              st.execute();
  getDBTransaction().commit();

  What is the best approach?
  
  Studio Edition Version 11.1.1.2.0
  
  Rognard

  Ranjinth,

  It is not against the layered architecture, none.

  Why not use an approach hybrid?

  Create a method of AM service, as you did, but instead of writing your own prepared statement, just manipulate the VO in the method: create a line, set attributes, insert the line.

• Repeat the extensible data from a table in a new

  Hello

  I managed to create a table in LC designer4 growing - IE. It is a four-column table with a header line followed by a line where I can add information in three table cells. If I need to have another line I click on the line button Add (placed in the header row), and a new appears. There is also a button that can systematically remove deleted a row. I'll call this my parent table.

  So far so good.

  Maybe it's better to explain exactly what I'm doing here...

  My parent table is a kind of to-do list he calls table X. Each column is as such: 1. what to do 2. who will do 3. When she will be

  It is extensible, so if there is more than one action to be carried out it will add extra lines.

  I also want to create a new table that is an update on the list to call this table Y:

  column a. what needed to be done (these data are extracted directly from column 1 on the to-do list) column B: at - it to happen? column C: if not, why - columns B and C are new and do not pull the data from the to do list.

  The problem is twofold: how repeat the data in the column 1 (given the fact that I can't use global data binding as column 1 can have several different entries), and if I can get past this first hurdle, how can I make automaticall table expand to the same amount of lines in table X?

  I should mention that I'm a designer so my programming expertise is severely limited. I managed to create the first table by watching the tutorials rather than find out myself. As far as I know the first table is done in javascript.

  Any help would be greatly appreciated!

  You need to loop through the tables and copies the data from the field.

  You have to adapt the example below for your table names and the reference field.

  Table1 = table to copy from

  Table2 = table to copy to

  Row1 = name of the rank that the fields are

  ColumnA = the name of the field being copied

  Here is the script (put it on the Click event of a button):

  Table2._Row1.count = Table1._Row1.count;
  var vCol1 = this.resolveNodes("Table1.Row1[*].ColumnA");
  var vCol2 = this.resolveNodes("Table2.Row1[*].ColumnA");
  
  for (var i = 0; i < vCol1.length; i ++) {
               vCol2.item(i).rawValue = vCol1.item(i).rawValue;
  }