Replace a hard drive with 100 GB unit P10 - 804

I want to replace the 60 GB hard drive in my P10 804 with a unit of 100 GB.

Q1 - can someone confirm a 100 GB drive compatible?

Can Q2 - someone point me to documentation showing how physically replace the drive?

Thank you

Roy

Hi Roy,

as far as I know, Toshiba offers no information on dismantling mashines, because you lose your warranty if you do this.

To upgrade your HARD drive, you must go to a Toshiba Service partner.

You can find under:
http://EU.computers.Toshiba-Europe.com/
Support & downloads

Good bye

Tags: Toshiba

Similar Questions

  • Is it possible to replace the hard drive with an SSD? or would it be too expensive?

    Is it possible to replace the hard drive with an SSD?

    or would it be too expensive?

    Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

    Re: This win to install a SSD drive in a PowerBook G4?

    Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

    FYI - I have used the adapter is even cheaper now

    https://www.Amazon.com/GP/product/B009BA8V4M

  • Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

    Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

    Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

  • laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

    Hey guys,.

    I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.

    I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

    boot device not found please install an operating system on drive hard drive (3f0)

    The hard drive is new and I did not not how its gives me this error!

    In addition, this laptop does not seem to boot from a cd to format!

    Any ideas?

    Thank you
    Karl

    Hey BHK6,

    I found out what was wrong! It was so simple!

    I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

    Thanks for your help anyway

    Karl

  • Re: Tecra A9 - 11M - replace the HARD drive with a larger

    I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

    Any suggestions on recommended records say 500 MB?

    Difficulties to install Windows 7 on this model?

    Hey,.

    > Any suggestions on recommended records say 500 MB?
    I assume you mean 500 GB and not 500MB, right? ;)

    Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

    You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

  • Qosmio X 500 - 10W - can I replace the HARD drive with another?

    Hello

    I have a Qosmio X 500 - 10W with two drive HARD Toshiba MK5055GSX 500 GB 5400 RPM 8 MB? SATA II but is one of the hs so I'm wondering if I can be replaced by a more powerful style, drive HARD 750 GB 7200 RPM / min 16 MB Toshiba courses?

    Thank you

    Hey,.

    Your question is a bit hard to understand, but I think you want to replace the HARD drive with another (faster) model, right?

    Well, that s no problem. 7200 RPM hard drives works, they are a little stronger, but they're faster so if you need more performance without problem.
    750 GB or more are also no problem because the SATA interface is not the limited capacity. Theoretically 1 TB or more should also work.

    Anyway, you can buy the 750Go you mentioned that it will work. :)
    ?

  • ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

    Hey, Lenovo,.

    I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

    Kind regards

    Mikael


  • Replace a HARD drive with a SDD for HP Pavilion dv6183ea

    Hello

    I have a HP Pavilion dv6183ea laptop and I was wondering if I can replace the hard drive with a new one SSD?

    Thank you

    Hello

    Of after crucial, you can not put your disk for one SSD.

    Kind regards

  • How to replace the hard drive with an SSD on a model of end 2011 MacBook Pro 15 inch, A1286

    Hello

    I would like to replace the hard drive on my model of end 2011 MacBook Pro 15 inch, A1286 with a disk solid state drive (SSD). First of all, I would like to know if this is possible. Second, what is the best way to do it? I'm under the Yosemite OS if that makes a difference.

    Here are some technical details of my current system:

    -MacBook Pro 15 inch, late 2011 model A1286

    -OS yosemite

    -16 GB of memory/RAM

    -Currently using stock HD

    All instructions step by step would be helpful with what software should I use to make backups of my current operating system (e.g., SuperDuper). I would also like to know what tools or material I need like type of screwdriver, cables to transfer data to the SSD, etc.. My goal is to not have to reinstall each app one by one on the SSD, but if that's the only way to do it then it's okay.

    Thanks in advance for any help.

    You can see instructions OWC here. Tools are mentioned in the discussion (I used a plastic knife picnic with the stronger edge somewhat blunt for nylon pry tool). I suggest you invest in one of these external fences. Install the SSD in who and clone internally externally with CarbonCopyCloner or SuperDuper. Then move the external drive of the internal drive after the start of the SSD in the external to confirm the operation.

  • Do need me an adapter to replace the hard drive with an SSD

    I want to know before I get out my drive if I need adapter to replace my old hard drive with a drive way SSD SSD drive to connect directly to a MacBook pro six, one?  Or do I need an adapter for the interface on the SSD

    SATA SSD have the same footprint than conventional hard drives (some may be thinner than 2 mm, but the closing screws are adjusted for difference) Although adapters can be provided, you must not use in your MBP.  I installed three SSD in my Mac without adapters.

    Ciao.

  • Pavilion dv7-4000 1 replacement of hard drives with more

    I have a dv7-4000 series double portable hard drive running windows 7 64 bit. One of the drives died and I am looking to buy a replacement and want to upgrade, but I'm not sure if I have 2 hard disks of different sizes.

    (1) can I replace factory bad HARD drive with a larger 320? (I'd then 1 factory 320 GB drive and 1 car again, more)

    (2) is the brand of the material of hard drive (Toshiba courses)?

    (3) are there any specific specs I should look for or avoid (ie. rpm, Gbps, etc.)?

    Hi wweksjk! : Yes, you can have 2 HD with different capacities for example on my PC of Xion MSI, which was built in 2006, I had 2 HD Western Digital, respectively 160 GB & 250 GB divided into 3 partitions

    the brand name is not as important as the number of turns faster the car turns your computer will be faster

    also look at the size of the buffer on the disk as well because the more it will speed up the boot time as well

    However install a new drive as boot drive will be complex, but if you follow the instructions that come with the HD installer it is possible

    for example, a 7200 RPM drive is faster than a 5400 RPM, but not as fast as a model k 10 or 15 k

    Good luck

    hope this helps to & help

    Happy holidays!

    spacechild

  • HP sleekbook 15-b005el: replace the hard drive with SDS

    Hi I have a Sleekbook and I wanted to change the hard drive in a SSD(128Gb)

    HP Pavilion Sleekbook 15-b005el

    Product number: C5R40EA #ABZ

    REV:1900 - 100

    What is the best upgrade kit? Thank you

    See the following list of videos for removal and replacement of the hard disk. (hard disk set)

    http://h20574.www2.HP.com/results.htm?SID=10862166&MEID=9E11075D-744F-4986-ACA1-547A14CA1B03

    You'll need is a mobile SATA 2.5 "SSD to replace the wisk hard legacy spinner with. I highly recommend that replace you it with the current disk cloning to the new.  This is the simplest method. See the sticky that I created in this section of the forum for more details on how it's done.

    http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/how-to-upgrade-your-notebook-to-a-SATA-2-5-quot-SSD/TD-p/4563352/jump-to/first-unread-message

    An SSD of 256 GB or higher capacity is recommended as a replacement for the disk hard legacy currently installed. An SSD of 256 GB or higher capacity will allow to use the recovery media that you created with the HP Recovery Media Creator utility.

    See the following links to NewEgg.com to see what will work. You can use SATA, SATAII and SATAIII interface SSDS. None of the other types of interfaces are compatible with the motherboard and the BIOS of your laptop!

    http://www.Newegg.com/internal-SSDS/subcategory/id-636?TID=11693

  • After mainboard replace my HARD drive with password works on TECRA S11?

    I hope that my local service center will replace my TECRA mainboard (later I'll tell why). Will my drive HARD with the password protection work and my files accessible encrypted fingerprints after a motherboard CPU replace?

    Windows 7 Pro will start in after this 'upgrade' hand / replace?
    (I have read the thread similar Tecra S5 topic, pls do not link which closed thread)

    Hello

    Usually, the HARD drive password should work after the replacement of the motherboard.
    The fact is that the HARD drive password is stored in a special area of the HARD drive and should not be an issue this motherboard has been replaced.

    I found this info in the knowledge base of Toshiba:
    + Password HDD TOSHIBA summary +.
    http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm

    + What is A HARD Word DRIVE? +
    http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm

    I hope this helps!

  • Replace the hard drive with SDS

    Hello!
    I have a HP Pavilion dv2500 laptop and I want to replace my original HHD with a Samsung 840 EVO Solid State Hard Drive. The big question is: it'll work? It will take something special to make it work?

    Thank you!

    It will work. The player will cost near what's worth the laptop, but it will work. If you are running Windows 7 or Windows 8 and especially Windows 8, the system adapts itself to a SSD so there is really nothing you have to do.

  • Replace the HARD drive with SSD on a T530 - noob question

    Hi all

    I have a T530 with conventional hard drive. I want to replace it with an SSD (probably Samsung 840 Pro). When I look at the replacement Web site instructions, they refer to the use of spacers during the installation of an SSD (as opposed to rubber rails that frame apparently my current HARD drive).

    Do I need these spacers in order to install an SSD? If so, should I buy Lenovo?

    Thank you very much

    Jason

    If it's the same outer dimensions transfer you the rails on the replacement drive rubber. They add protection against shocks to the reader while an SSD is pretty shockproof. It does not float around well! If you do not use the rails lose you and probably never find them again if needed.

Maybe you are looking for

  • I can't write anything on the areas that fall within any web page

    When I opened a new web page, sometimes I have an annoying error when I try to write anything.The problem is solved by placing the mouse pointer over the area of the main search and to return to the same point.

  • BIOS update help stuck!

    Hi, I have a Pavilion dv6-3040us and when I turned on my laptop, he asked me if I wanted to do a bios update then I did and press ENTER.  Now its impasse on 'New BIOS Image Verification' block 34/512 for almost an hour now.  What can I do? Thank you

  • Cannot access Microsoft Update

    For three years now, I not was able to access Microsoft Update because I get the below error message: Install the ActiveX control required to view the siteThe site is not correctly displayed on your computer without this control. To install it: 1 rig

  • NX - OS ACS Version

    Hello. We have ACS 4.2 for our existing IOS routers mainly 7600... We have just integrated Nexus switches. What is the appropriate CSA version/device that will support existing IOS routers and switches new NX - OS? Thank you

  • Accident of Illustrator CC 2015 Gaussian blur

    1. open a new blank document2 draw a shape3 Effects > Gaussian blur4 Preview or apply as well will cause crashTried everything I could find - disability case, several reboots, removed the preferences manually and automatically open, re-installed Illu