Replacement of the hard disk for Equium A60-155
I need to replace the hard drive in my equium A60-155. I need to know what is compatible with this model and if the brand of the drive is important in compatibility. For example should be a drive hard toshiba or is it possible to others.
Any help would be greatly appreciated.
You n t need to install a HDD in particular of Toshiba. You can also use disk of another company.
It is important that you use a HARD drive with support for hardware specifications.
I found these useful discussions on the replacement of the HDD on the Satellite and Equium A60:
Satellite A60 is very similar to the A60 Equium and so the two series use the same hard disks
I have a Toshiba Satellite A100 - 337 Vista Premium. Unfortunately, the HARD drive died in it and it is out of warranty.
I have the recovery CD and it have used before so know this works.
I intend to put in a HARD drive replacement, but looking around, I can get a much better deal on something like maxtor/WD/seagate.
It would be a problem for the recovery CD?
In addition, the original disk is 60 GB - but if possible, while I replace in any case, I like to put in a bigger. What worries me is if the recovery CD is for 60 GB image pre - and then the rest of a larger HARD drive would be just wasted space? (if indeed it would even work in the first place)
Someone else put in a brand/different size of HDD and used the successfully recovery CD? I have to admit not knowing much about how does the recovery process, pointers on that would be appreciated also.
See you soon.
A different size will be fine. Not sure about the different makes it well, but as far as I know, as long as it has the same interface as the original HARD disk, and then you'll be fine.
A Yes, the recovery works on a more than 60 GB HARD drive.
I hope this helps.
I know it's an old round top, but I like it. My main hard drive died, then I replace it with the secondary drive waving back, or use an external drive it is up and running.
Or is a possible replacement part no451867-001 sata200 GB 4200 RPM and where I get it. Oou can I use a different hard drive or upgrade.
I'm going to buy a new computer hp laptop pavilion g6 2211tx that any comment would be appreciated.
However need to get old laptop upward and the execution of first AID!
If you upgrade to Windows 7, you will be able to access your secondary hard drive and backup of files that it contains. You can also put the secondary drive in another computer that works to recover the files from the backup drive.
I tried to set up a link today from my new laptop computer Windows 7 my most top of desktop running vista. The liaison program stated that the administrator on my old computer was only a temporary user. I tried to set up the account as a permanent user without realizing that it would replace the current account. I have now no access to programs from hard drive of the main user I was using. I was wondering if there is anything I can do to access the hard disk with this user and import files? I forgot almost all programs appear on the computer but open to anything.
1. What do you mean by link program?
2. What have you tried to do?
3. how many accounts do you currently on the computer and what are they?
4. what happens when you try to access the files on the hard drive?
It seems that you do not have permissions to access the files on the hard drive.
I suggest that take you the files and folder try to access.
To take ownership of a folder
(a) right click on the folder you want to take control and then click Properties.
(b) click on the Security tab, click Advanced, and then click the owner tab.
(c) click on Edit. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(d) click on the name of the person you want to give to the property.
(e) If you want that person to be the owner of the files and subfolders in this folder, select the check box Replace owner subcontainers and objects .
(f) click OK.
Troubleshoot "access denied" when opening files or folders
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Hello, 4 days ago I bought dell inspiron with windows 8.1 5748 and a 1 TB hard drive.
I also bought samsung 250 GB of ssd drive 840EVO to replace the disk of 1 TB of the laptop. I cloned the HARD disk drive and restored the image in the ssd drive and when I mounted the SDS disc and shot to the top of the laptop I got an error that it cannot detect a drive... Press F2 to enter setup F5 for diagnostics and F1 to reboot.
First I made sure to rise properly. After I checked I entered the bios where I noticed that the drive is recognized in the details of the system. The model was correct, the capasity as well. Fashion was ahci.
I ran the diagnostics and they couldn't locate a drive.
So, is this an incompatibility? I checked for updates to the bios and I see I m to date on that. The player is surelly ok as I have tested on another pc...
What can I do?
Thanks in advance!
We recommend that you use the recovery disks that are you ready when you got your system to restore the image of the original on the SSD hard drive. Since they have the same size, it should work without problem.
I have a laptop HP Compaq NX9030. The hard disk starts to show errors so I intend to replace it. Does anyone know if the laptop has a limited capacity for replacement hard drives?
You have the Intel 855 chipset. In order to launch a hard drive larger than 137 GB, you need help for 48-bit Large Block Addressing in the chipset, BIOS and operating system. I find contradictory information on the ability of the chipset 855 doing of 48bits LBA. I also wonder if ever taken HP worth of produce a BIOS that would make 48 bit LBA in this model being the biggest hard drive offered 60 gigs. In other words, I think you should assume 120 GB is size max hard drive you can use and the only way I can think to prove otherwise is to buy the largest disk and install it. Windows XP Sp1a and superior does not large drives.
I use ESX 4.0 with vSphere 4.0.
When there is no snapshots more I would like to increase the capacity of the hard disk of the virtual machine in the menu to change settings / Hard disk. There is MS Windows Srv 2008 R2 64-bit installed.
What is the right way to do it? Operating system, there is no problem with this increased disc? Primary partition will automatically increase as or what I have to do it myself later?
There should not be problems with the guest operating system when you increase the size of the virtual disk. After the increase in size in the settings of the virtual machine, you need to resize the NTFS partition in the VM Windows 2008 disk management.
I inherited the estate of a parent a Toshiba Equium A60-155 (model without PSA67E-00300C8J)
It came without any hard drive - the coverage is in the original box from Toshiba, but that's all.
As it was a gift, I don't mind buying a new HARD drive
But, can someone tell me the technique so I buy the right one please?
Post edited by: tynyffridd - topic (oops)
I found the info that this laptop comes with several different hard drive capacities between 40 and 60 GB.
So, theoretically, you can use any 2.5 with IDE connector up to 80 or even 120 GB.
I want to replace the 80 GB HDD of my A100 for something big.
I'm guessing it's a SATA, I'll need?
Nobody knows what is the greatest, my laptop can handle without any performance?
Just to confirm that it is a satellite A100-027
Also, I literally get out the old one, stick in the new and then load Windows XP on it? Is it really as simple as that :/?
Yes, the A100 Equium supports the SATA HDD controller and so you will need a SATA 2.5 HARD disk!
> Also, I literally get out the old one, stick in the new and then load Windows XP on it? Is it really as simple as that :/?
Yes, the upgrade of the HARD drive is not difficult.
In most cases, you will need to remove the HDD from the laptop's HARD drive Bay, then switch the HARD drive bracket to the new HARD drive, then insert the new HARD disc again in Notepad.
That s it.
One last question, I replace the hard drive (160G) in my old Pavilion a800n and wonder what would be the size (well at least 500G) max. Guess I could partition if necessary...
Win. XP (32 bit), Phoenix BIOS, LTD. 3.11, 09/02/2004.
Sorry, based on the following specifications, I would not be to HARD disk. If you need more space for data/files, buy an external HARD drive.
My hard drive has failed a few weeks previously. I replaced it and got online and return with Outlook Express with the permission of my cable company. But now all my emails come in pairs of the same message. How to stop this?
In addition, this time I find the potion of the Outlook Express interface that is devoted to the email itself is smaller than the previous hard disk.
OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit
Processor: Intel (r) Pentium (r) 4 CPU clocked at 2.66 GHz, x 86 family 15 model 2 Stepping 9
Number of processors: 1
RAM: 2046 MB
Graphics card: Intel (r) 82845 G/GL/GE/PE/GV Graphics Controller, 64 MB
Hard disks: C: Total - 76285 MB, free - 60836 MB;
Motherboard: Dell Computer Corp., G 0, 1548
128 GB Flash Drive F1: Tools | Accounts | Mail | Properties | Advanced - uncheck: leave a copy of messages on the server.2: Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see: http://www.oehelp.com/OETips.aspx#3
Why you don't need your anti-virus to scan your email
The way most effective to do this is to completely remove the program anti-virus and then perform a custom installation. When the possibility of withdrawing the e-mail analysis arises, remove.3: Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.With OE closed, find the Pop3uidl.dbx file and delete it. Another will be created automatically when you open OE.
I'm looking for a CD of origin for Toshiba EQUIUM A60.
Please give my a link.
The original Toshiba Recovery CD, you can purchase from the service partner in your County.
The other possibility is to install the OS from the Microsoft CD-ROM, and then install all the drivers Toshiba and the Toshiba driver page tools.
I am a new owner of a L350 - 10L. Loading the files from the laptop, I was told that I had run out of space. Investigate a bit more it seems I drive hard havea partitioned. I think that I expect that the "valorisation" of files are stored on the hard drive. But the size of the partition seems a little odd to me. The disc has a pertition to Vista and a called E:\Data being 54.5 GB in size.
Question - can I safely reformat the hard drive? Should I run the Setup again. This seems a bit odd. Is there a reason for the size of partition?
I have the same laptop. Download GParted LiveCD and boot inside. Then resize partition D:\ lower then resize the partition above C:\ with unallocated space. Is not wipe your data.
Hope this helps,
What is the part number for Pavilion DV7 hard drive?This widget could not be displayed.
I want a new hard drive in my laptop (Satellite A60-302) t. This is - http://www.seagate.com/cda/products/discsales/marketing/detail/0, 1596,736,00.html drive, to adapt to the laptop?
Answer to this question can give just anyone who has the same unit and tested it with the same HARD drive. Problem is that there is no exact specification on the latest BIOS updates and no one can say with certainty whether or not he will support.
Maybe you are looking for
Hello I work with data that has a timestamp of 24 hours that are associated with. Sometimes, the data will be timestamped 11:59:59.999... and then come back 00:00:00.000... However when bringing these data in the VIEW tab with another channel that ha
Hello I program with datasocket open/read, sometimes stops playing and after some time, maybe 10 seconds, it go on reading, I compare with variable shared (DSC) and found the shared variable can be updated, I don't know what happens to my program. (t
Hello I have a new computer, but with the same old printer (HP PSC 1410) Before, with Windows XP I could scan in PDF format, now I have Windows 7 and analysis tool is different and more important - doesn't have the ability to scan in PDF format! What
Dear, I changed my router and when I want to connect to my 8500 has more to the new network, it asks me a WEP password. However, the new network is WPA2 protected, so the printer does not recognize the password. The printer does not have the possibil
I have no idea what caused it, or when it happened. Open mspaint directly works fine. It's just the shortcuts that do not work.