Replication of data to a new environment warehouses

Similar Questions

• How to move Oracle APPS 12 configuration data to the new environment of production of 12 APPS

  Dear all
  
  I need to know, how we can move from Oracle APPS 12 configuration data to the new environment of production of 12 APPS? What is the safe and easy way, we do not want to make the new facility of 12 APPS and reinstalling things...
  
  see you soon

  Hello

  The scenario above is correct and should work fine. Make sure that the central source and instances of the target are the same patch upgraded.

  Kind regards
  Hussein

• Design of new environment VSphere, VMotion, Storage, NIC issues

  I have a new environment I design. The plan is to have two host 5.1 running VSphere. Each host will have multiple servers requiring HA. I intend to have an additional Buffalo storage server. Here are my questions.

  So that HA using Vmotion, will it store the data store of the virtual machine on the storage server? Or the data store would be on the host where the virtual machine, and then if this host fails it copies on?

  NIC how would I need per server for HA? I count at least 3. One for the network traffic, management and SAN. All I'm missing?

  OK, so if I put my two hosts in a HA cluster and I have my VM installed on a separate storage server and one of my crashes VSPhere hosts will be able to restart my virtual computer on the other host?

  Yes, assuming that both hosts have access to the storage and HA is configured correctly.

  And VMotion is just for a scheduled maintenance?

  Not only for maintenance, but also for example load management/distribution.

  André

• migration of user to the new environment of horizon profile view

  Hello, we have a new environment of horizon view during the installation of hardware new and ready to go

  at the moment we saw 5.1 in production. 5.1 environment is configured with dedicated workstations + user data disks. the windows profile is redirected to the user data disk. We also have records of the location of desktop and my documents redirection to a cifs share.

  We must abandon our users to the new environment with minimum disruption of our EBU end (IE not re - create profiles). We also want to integrate the management of persona in the new environment of horizon view.

  no indication on how to better accomplish the migration would be greatly appreciated.

  Thanks in advance.

  -charlie

  With regard to the use of Windows and persona profiles that should be pretty simple migration.  I had a similar situation, and the first thing I would do is to configure persona in your GPOS.  You can use the existing path or create a new path in there is an option for "Override Active Directory chemin_profil_utilisateur if it is set."   Alternatively, you can make the folder redirection with persona at the same location. Again, I would set up your GPOS with the same settings you use for roaming profiles and folder redirection, then remove the old GPO and implement the new persona profiles.  I've lived without interruption of service, but you may need to do a global gpupdate/force on the clients.

• Problems opening existing Oracle 9i in the new environment of 11g

  Hello world
  
  I have a challenge for you! Just to be clear, I am not a specialist of the Oracle (or call me a noob Oracle).
  
  Challenge: Open an Oracle 9i database in a new Oracle 11 g environment.
  
  Result: Be able to connect to an Oracle database running with "SSMA for Oracle" to convert it to a SQL database.
  
  Starting point:
  -Receipt of the customer: DBF, CTL and logs of an Oracle environment existing.
  -Since I can't download Oracle 9i environment, I chose to install 11g environment and hope for a good backward compatibility.
  
  How I got:
  -Installed 11g environment
  -Set up a database pointing to the files DBF
  ~ Change init.ora to use CTL files
  ~ Create init.ora spfile
  ~ Start database mount and rename the database and data files using sqlplus (liaison with "sys as sysdba")
  
  Questions:
  Now I can start the database, but sometimes with a * "ORA-00704: bootstrap process failure" * and recommend I start it with the UPGRADE option. "» Start with UPGRADE option works and I can navigate through the database using Toad tool (login 'as sysdba'). But 'SSMA for Oracle' is not an option to connect 'as sysdba' and gives me a "ORA-39710: only connect AS SYSDBA is allowed when it is OPENED in UPGRADE mode.
  
  Since the MASA for customer Oracle cannot connect to a database started with the UPGRADE option I probably have to fix the "ORA-00704: bootstrap process failure»
  I tried to avoid the upgrade option in trying to upgrade the database to 11g. But utlu112i.sql and catalog.sql give me errors like "ORA-04023: object SYS." STANDARD cannot be validated. "
  
  Issues related to the:
  -Do you think I want to achieve is possible at all?
  -Can I easily run an Oracle 9i database in a 11g environment or what I really need to upgrade?
  -Do you think it is the best way to get an Oracle existing database running in a new environment?
  -If Yes: how to solve the error ORA-00704?
  
  If you need more information, alert logs, files .ora or anything to give an appropriate response, please ask and I'll give them.
  
  Thanks in advance!
  
  Kind regards
  
  DirCo

  Hello

  9i binaries are no more on the website of oracle since this version is located in the long ago.

  What I would do (since you have your files backed up somewhere, at least I hope) is simply:
  Set oracle_sid = xxx
  sqlplus/nolog
  Connect / as sysdba
  start upgrade
  @?\rdbms\admin\catupgrd.sql (to upgrade the database)
  @?\rdbms\admin\utlrp.sql (to compile the modules)

  Wait a while (2-3 hours)

  immediate stop
  startup

  Check no errors in alert_log and you have access to your data.

  Then 2 possibilities:

  It worked - so everything goes well for you.
  It does not, replace your original files and try something else.

  I think this will work if, as we have already said, you're 9.2.0.4 or more.

  Do not lose time on futile questions such as 'what is really the version of my files. You care, upgrade script works for all of the above versions 9.2.0.4.

  Don't forget that:
  Passwords are now (11g) case sensitive (but you can change them when logged in sysdba)
  Some pl/sql will not compile, but I think that you are mainly interested in the data.

  I hope this helps.

  Christian COMMARMOND

• can I erase all the data from my old phone with out damaging the data on my new phone?

  My old phone is disconnected from my iCloud, I want to know that the data on my new phone will not erase?

  Provided that you (a) save it to the top and (b) have signed, Yes.

• I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

  I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

  For your photos, try importing them to your computer and their synchronization then back to the SE.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  For your texts, they moved with the backup restore?

• Time capsule will save my laptop complete? Which means that if it crashes, breaks, etc. I'll be able to restore all my memory/data on a new laptop? Exactly how does it work? Thank you.

  Time capsule will save my laptop complete? Which means that if it crashes, breaks, etc. I'll be able to restore all my memory/data on a new laptop? Exactly how does it work? Thank you.

  Yes. Time Capsule uses the Time Machine on your Mac software. Here is information on both and the restoration:

  http://www.Apple.com/airport-time-capsule/

  Use Time Machine to back up or restore your Mac - Apple Support

• No iCloud backup restore data helps a new iPhone?

  Hello! IM planning to buy a new iPhone and I wonder if I could useiCloud to transfer most of my data to the new iPhone? If this is not the case, then, then, are there other solutions for this? Thank you for your help and I will choose the best answer for me later

  You can set up a new phone using a backup from an existing device. When you set up the new phone and connect you to your iCloud account, it will ask you if you want to configure the phone as new, or if you want to restore from a backup. You must select the backup you want to restore from. You need a good Wifi connection for this. You can also set it using an iTunes backup.

  Here is a support article that should help you:

  Restore from iTunes backup - Apple Support any iCloud

  See you soon,.

  GB

• Classic report shows wrong "could not parse the SQL query: ORA-00942" error after migrating app to the new environment

  After migrating my APEX 4.1 application to a new environment, one classic report displays a "cannot parse the SQL query: ORA-00942: table or view does not exist" error when the page is displayed. Change the region to report SQL source to somehow (e.g., remove spaces, changing the order of the variables in the WHERE clause) immediately solves the problem, but by returning to the source of the region causes the report error again (the source region valid code without error, however).

  Throw the error message:

  Select v.id,

  v.Col1

  of view_vw v

  where (: P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Do not throw error:

  Select v.id,

  v.Col1

  of view_vw v

  where (:P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Changing the order of column in the report has the same effect; i.e. He arranges, but return back to the original column order causes the error to display.

  It's as if a cached result for the correct select statement used by the report is displayed. However, the application does not use the caching of page/region. Any ideas of what could be the cause?

  He solved. Ultimately, all that was necessary was to clear the DB cache using:

  alter system flush shared_pool;

• I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to ac

  I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to access Adobe.

  Strangely the same problem occurs when I try to install and older version of Lightroom 4.

  Can you help me?

  Hello

  It is the OS, not Flash drive, to ask for the password.  Please refer to the FAQ what userid & password I need to install Flash Player? for assistance.

  --

  Maria

• need to migrate data to a new virtual machine

  Currently I have a W2K3 off warranty, physical file server. I created a file in Vmware VM W2K8 server which will replace previously mentioned W2k3 server. My data for hosts vSphere 4 and all the physical servers are stored on a CF CX 410 San. My questions are: how to get the data to my new virtual machine? Do I need to migrate? Redirect? Present it? Is there a tool in VMware? Perform this at the level of the logic unit number? I can restore from tape to complete backup using the backup software?

  To say the least, I am a little confused and would appreciate any ideas, I'm sure there is more than one way. Thank you.

  You have a few options.

  Use RDM using the link to the Tunis above.

  Create a new virtual disk in virtual machines and use robocopy to copy the data from the physical server to the virtual machines.

  If the has an option of CIFS SAN then use it directly to files on the server.

• What should I wear my PES with data to a new PC? [was: accounts]

  Wie kann ich mein PSE mit den Daten auf den neuen PC portieren?

  Accounts says:

  What should I wear my PES with data to a new PC?

  Microsoft® translator translator

  The only way you can do this by installing the ESP on your new machine using the DVD and the serial number you have purchased.  Once this is done, you might want to copy all photos from the old machine to a flash drive and then copy to flash drive in your pictures folder and let PSE concludes that they are and catalogues automatically.

  This method is ideal if your did not create catalog very sophisticated in your old machine, because you can also transfer the old catalog on your new PC so that you don't have to recreate the catalog from scratch.  If you want to transfer the catalog as well then on your old PC run PSE Organizer and go to:

  File > backup catalog

  It is also recorded on removable flash drive

  Now go to the new computer and launch Agenda and do almost the same thing except:

  File > restore catalog

  Now this almost should help you get started.

  Good luck.

• OVD cannot replace OID (replication of data from AD)

  Hello
  
  We currently have AD and SSO/OID 10 g configured with our EBS R12. We intend to upgrade OSSO OAM and OID 10 g and 11g.
  I have the following question
  
  1 OVD so I understand can make AD and OID look like a single LDAP. But I have a question that OVD can replace OID?
  is it as a way to avoid the replication of data between AD in OID implementing TPM? This means that user data in AD synchronize directly with the ERP database.
  
  Thank you
  Specifications

  user11381800 wrote:
  Hello

  We currently have AD and SSO/OID 10 g configured with our EBS R12. We intend to upgrade OSSO OAM and OID 10 g and 11g.
  I have the following question

  1 OVD so I understand can make AD and OID look like a single LDAP. But I have a question that OVD can replace OID?
  is it as a way to avoid the replication of data between AD in OID implementing TPM? This means that user data in AD synchronize directly with the ERP database.

  Thank you
  Specifications

  You can use OVD before DIO, but not for the EBS SSO scenario. In this case, go directly to the OID.

• VMs DR using the data existing or new store Signature signature

  Dear all

  I need help in the following:

  When I do replication between two storages with MRS senario I shared the two storages by stopping the replication and test existing virtual machines on the site of DR (Backup Site), I thought of them which is SQL Server works well with its data store file, my question is the servers ESX use existing Signature or new signature

  any body can help me check that, or are there documents on this subject

  Hello

  Data on the website of DR warehouses are resigned. That's why you see in their names, the prefix "wink-xxx".

  Michael.