VMs DR using the data existing or new store Signature signature
Dear all
I need help in the following:
When I do replication between two storages with MRS senario I shared the two storages by stopping the replication and test existing virtual machines on the site of DR (Backup Site), I thought of them which is SQL Server works well with its data store file, my question is the servers ESX use existing Signature or new signature
any body can help me check that, or are there documents on this subject
Hello
Data on the website of DR warehouses are resigned. That's why you see in their names, the prefix "wink-xxx".
Michael.
Tags: VMware
Similar Questions
-
Extraction using the date: old and: news in the triggers
Hello
I'm exeuting everything by retrieving a field and a trigger date help: OLD and: NEW variables, it leaves the game time stamp.
"for example, the value real start_date field in the table is 12 October 2005 19:04:25 ', but when I use: NEW.start_date, it returns only 12 October 2005.
How do I return the timestamp also?
Thank you.:) Oracle implicit conversion / comparison I guess, try this and let me know the result.
DECODE(:NEW.start_date,:OLD.start_date,CAST(NULL as date),:NEW.start_date)Here's an illustration of what I'm trying to say.
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0 Connected as hr SQL> select decode(sysdate,sysdate-1,CAST(NULL as date),sysdate) from dual; DECODE(SYSDATE,SYSDATE-1,CAST( ------------------------------ 12-May-2010 12:11:50 PM SQL> select decode(sysdate,sysdate-1,NULL,sysdate) from dual; DECODE(SYSDATE,SYSDATE-1,NULL, ------------------------------ 12-MAY-10 SQL>Published by: mohamed on May 11, 2010 23:42
-
migration from 10g to 12 c using the data pump in
Hi, while I used the data pump at the level of the schema before, I'm relatively new to the full database import.
We are trying a full database migration to 10.2.0.4 to 12 c using the complete method of database data pump over db link.
the DBA has indicated to avoid move SYSAUX and SYSTEM objects. but initially during the documentation review, it appeared that these objects are not exported since the TRANSPORTABLE given target = system NEVER. If anyone can confirm this? done import and export log refers to the objects I thought would not:
...
19:41:11.684 23 FEBRUARY 15: Estimated TABLE_DATA 3718 objects in 77 seconds 19:41:12.450 23 February 15: total estimation using BLOCKS method: 52,93 GB
19:41:14.058 23 February 15: object DATABASE_EXPORT/TABLESPACE of treatment type
20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'UNDOTBS1' already exists
20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'SYSAUX' already exists
20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'TEMP' already exists
20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'USERS' existing
20:10:33.200 23 FEBRUARY 15: 96 objects TABLESPACE finished in 1759 seconds 20:10:33.208 23 February 15: treatment of type of object DATABASE_EXPORT/PROFILE
20:10:33.445 23 FEBRUARY 15: 7 PROFILE items finished in 1 seconds 20:10:33.453 23 February 15: treatment of DATABASE_EXPORT/SYS_USER/USER object type
20:10:33.842 23 FEBRUARY 15: 1 USER objects ended in 0 seconds 20:10:33.852 23 February 15: treatment of DATABASE_EXPORT/SCHEMA/USER object type
20:10:52.368 23 February 15: ORA-31684: USER object type: 'OUTLN' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'ANONYMOUS' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'OLAPSYS' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'MDDATA' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'SCOTT' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'LLTEST' already exists
20:10:52.372 23 FEBRUARY 15: Finished objects USER 1140 in 19 seconds 20:10:52.375 23 February 15: object DATABASE_EXPORT/ROLE of treatment type
20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'SELECT_CATALOG_ROLE' already exists
20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'EXECUTE_CATALOG_ROLE' already exists
20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'DELETE_CATALOG_ROLE' already exists
20:10:55.256 23 February 15: ORA-31684: object ROLE type: 'RECOVERY_CATALOG_OWNER' already exists
...
the most insight.
The schema SYS, CTXSYS and MDSYS ORDSYS are not exported using exp/expdp
DOC - ID: Note: 228482.1
I guess that he has already installed a 12 c software and created an itseems database - so when you have imported you have this "already exists."
Every time the database is created and the software installed by default system, sys, sysaux will be created.
-
ListView xml by using the data source does not?
Hello
When I use the data for loading XML source, listview displays data only if there is at least 2 element in the XML file.
import bb.cascades 1.0 import bb.data 1.0 NavigationPane { id: nav Page { id: emp titleBar: TitleBar { visibility: ChromeVisibility.Visible } onCreationCompleted: { dataSource1.load(); //load the xml when page is created } actions: [ ActionItem { title: qsTr("Create List") ActionBar.placement: ActionBarPlacement.OnBar onTriggered: { dialog.open(); } } ] Container { topPadding: 30.0 leftPadding: 20.0 rightPadding: 20.0 ListView { id:list1 dataModel:dataModel listItemComponents: [ ListItemComponent { StandardListItem { title: { qsTr(ListItemData.name) } } } ] } } } //page attachedObjects: [ GroupDataModel { id:dataModel }, DataSource { id: dataSource1 source: "models/employeelist.xml" query: "/root/employee" type: DataSourceType.Xml onDataLoaded: { dataModel.clear(); dataModel.insertList(data); } }, Dialog { id: dialog Container { background: Color.Gray layout: StackLayout { } verticalAlignment: VerticalAlignment.Center horizontalAlignment: HorizontalAlignment.Center preferredWidth: 700.0 leftPadding: 20.0 rightPadding: 20.0 topPadding: 20.0 bottomPadding: 20.0 Container { background: Color.White horizontalAlignment: HorizontalAlignment.Center preferredWidth: 700.0 preferredHeight: 50.0 Label { text: "Add Employee List" textStyle.base: SystemDefaults.TextStyles.TitleText textStyle.color: Color.DarkBlue horizontalAlignment: HorizontalAlignment.Center textStyle.fontSizeValue: 4.0 } } Container { topPadding: 30.0 layout: StackLayout { orientation: LayoutOrientation.LeftToRight } Label { text: "Employee Name " } TextField { id:nametxt } } Container { topPadding: 30.0 layout: StackLayout { orientation: LayoutOrientation.LeftToRight } Button { text: "OK" onClicked: { var name=nametxt.text; if(nametxt.text=="") { _model.toastinQml("Please enter a name"); } else { _model.writeEmployeeName(name); //writing name to the employeelist.xml nametxt.text=""; dialog.close(); dataSource1.load(); //loading the xml } } preferredWidth: 300.0 } Button { text: "Cancel" onClicked: { dialog.close(); } preferredWidth: 300.0 } } } } ] }//navigationWhen I add a name to the first time to the XML, the list shows nothing. Then, when I add a new name, it displays the list.
Why is it so? Is there a any mistake I made?
Help, please!
Thanks in advance
Diakite
It seems that there is a problem reported on the DIT that was refitted with internal BlackBerry MKS defect tracking system. Until this issue is reviewed by our internal teams, please use the solution suggested by the Rapporteur for the question by introducing an "if" statement before inserting data to the DataModel:
if (data.name) { empDataModel.insert(data); } else { empDataModel.insertList(data); } -
Selection of the list of clients using the clause "EXISTS".
Dear all,
I have 3 tables, say,
TABLE1:
CUST_CODE
(PRIMARY KEY)
CUST_NAME
CUST_COUNTRY_CODE
CUST_CITY_CODE
CUST_AREA_CODE
A
CUST1
COU1
CIT1
A1
B
CUST2
COU2
CIT2
A2
C
CUST3
COU2
CIT2
A3
D
CUST4
COU3
CIT4
A4
E
CUST5
COU3
CIT5
A5
TABLE2
STOCK_SYS_ID
(PRIMARY KEY)
STOCK_CUSTOMER_CODE
STOCK_CUSTOMER_
COU_CODE
STOCK_
CUSTOMER_
CIT_CODE
STOCK_
CUSTOMER_
ARE_CODE
STOCK_DOC_
CREATED
1
A
[Leaving empty as we have reference only to the customers and the date here...]
10/15/2015
2
B
15/09/2015
3
A
16/08/2015
4
C
18/08/2015
5
E
22/07/2015
6
C
31/01/2015
7
A
15/10/2014
TABLE 3
AREA_CODE
AREA_COUNTRY_CODE
AREA_CITY_CODE
A1
COU1
CIT1
A2
COU2
CIT2
A3
COU3
CIT2
A4
COU3
CIT3
A5
COU4
CIT5
How can I find the list of clients of TABLE1, which are present in TABLE2 by 2015 and have country-city-zone, both correct mapping as specified in section TABLE3 using the clause "EXISTS".
Is that my output will be like,
CUST_CODE
(ONLY CORRECT CUSTOMER CODES)
CUST_NAME
A
CUST1
B
CUST2
Thanks in advance,
Séverine Suresh
Hello
So, you want to see 3 columns in table1 correspond to 3 columns in t3. It is not enough for only 1 column equal:
Area_Code must be equal
country_code and must be equal
city_code and must be equal.
Here's a way to encode that, by using the EXISTS operator in a WHERE clause:
SELECT cust_no, cust_name
FROM table1 t1
WHEN THERE IS)
SELECT 0
Table 3 T3
WHERE t3.area_code = t1.cust_area_code
AND t3.area_country_code = t1.cust_country_code
AND t3.area_city_code = t1.cust_city_code
)
;
I hope that answers your question.
If not, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results you want to start from these data (otherwise what you've posted already).
Explain, using specific examples, how you get these results from these data.
Always say what version of Oracle you are using (for example, 11.2.0.2.0).
See the FAQ forum: Re: 2. How can I ask a question on the forums?
-
Using the data of EBS in BI Publisher
Question: Is it possible to directly use EBS data in BI Publisher? If so, can you point me to the documentation?
Here's the scenario:
Imagine that our company uses Oracle E-Business Suite. All the columns, tables and diagrams Oracle related to BSE. It is the backbone of our company data. Couldn't live without it.
We're also crazy to OBIEE, especially BI Publisher. We have people who are experts in BI Publisher.
The CEO of the company would like to enjoy the mountains of data available in EBS, but also the expertise of the people who are trained and skilled in BI Publisher, using the data of EBS directly in BI Publisher. The Director-general provided us with a budget and staffing appropriate to perform a single installation of all structures must be added, or middle, for this to happen.
Objective of the Chief Executive Officer is for data additions and revisions in EBS will be included automatically in the reports BI Publisher. Assuming that between Monday and Tuesday, none of the structural changes that occurred in any of the EBS diagrams, tables or columns, assuming that everything we have done is add and/or modify data from BSE, then the BI Publisher reports must reflect the Monday data Monday and, without having to do anything in the meantime, reflect the Tuesday data just sitting Tuesday and running the editor of BI reports Tuesday morning. Not every day to rebuild XML files or something like that. Just clean and totally transparent use of the EBS data it gets added and updated during the normal course of business.
In general, what steps do we need to carry out - in EBS, in the XML Editor (if any) and BI Publisher - to directly use the data of EBS in BI Publisher on a daily basis as described above?
Ideally, I like just go to the Admin page in BI Publisher and add EBS as a new data source, or perhaps to use the section of the integration of the Admin page, as we would with discoverer or workspace of Hyperion and Shared Services. But I know that's not as simple as that.
Can you help clarify?
Thank you!"Ideally, I like just go to the Admin page in BI Publisher and add EBS as a new data source, or perhaps to use the section of the integration of the Admin page, as we would with discoverer or workspace of Hyperion and Shared Services. '" But I know that's not as simple as that. »
I don't know why you don't think it's as simple as that, but it is. Add a new JDBC data source, assign it to BEEP roles, create templates of data/queries against this data source and you're ready to go.
To use the multi-org views, you need to set the org_id in forward initiation of the report.
What version of BEEP are you using? We have the last BEEP 11 g, we use eBS (R12) as the security model, Teradata is our main source of data, but almost all the reports uses the security context for the multi-org eBS to limit the data of Teradata, based on the security profile of the user as defined in eBS.
I hope this helps.
Thank you
Sunder -
FaceTime uses the data when it is off wifi?
Yep, it will use the cell data. About 3 MB of / minute.
-
can I erase all the data from my old phone with out damaging the data on my new phone?
My old phone is disconnected from my iCloud, I want to know that the data on my new phone will not erase?
Provided that you (a) save it to the top and (b) have signed, Yes.
-
JDeveloper 12.1.2 has a problem with links when you use the data bean control
Build JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668
The problem that I am facing is:
I used the data bean control to create our user interface. After that I dragged my jsff page data control, links have been created.
I opened the XML pagedef to my page. On the Bindings tab and executable, I added a few links more by clicking on the Green plus sign. After I saved my changes, I noticed that some other links have been replaced by a link to the different executable files.
This behavior occurs almost everytime I have edit links. Does anyone else see this problem?
It looks like another instance of the bug described in https://java.net/jira/browse/ADFEMG-156
This bug is fixed in 12.1.3. If you need the fix in 12.1.2 you should open a SR with support.oracle.com and ask a backport.
Timo
-
I need an activation number for my Adobe Acrobat 7.0 Standard, so I can use the program on my new laptop computer
I'm sorry, but Acrobat 7 is quite an old version and no more Adobe supports the same.
Also, for Acrobat 7 activation server may not be available.
Please go to the link of the KB doc and see if that helps:
Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3
Kind regards
Ana Maria
-
How to use the date with the report parameter format
Hi all
How to use the date format with this tag function,
<? param@begin:P_FROM_DATE? > <? $P_FROM_DATE? >
This date of form source of report and setting is coming as this 2012/11/01 00:00:00.
So now I need this in MY-DD-YYYY marker. I tried like this..? param@begin:P_FROM_DATE? > <? $format - date: P_FROM_DATE; ' DD-MON-YYYY '? >
but its giving error. Can someone pls how to convert to the format of date custom.
Thanks and greetings
Srikkanth.MProblem solved.
REF this link
-
the advantage of using the date dimension.
Hi gurus,
I have a table of facts with 5 different dates as the shipping date, the order date.
My question is
Case 1. in fact, table I store date_keys (substitution integers) and create several date dimensions (alas) for each type of date as a date_dimension alias for the shipping date, an alias for the date of the order etc (in the model of declaration).
Case 2: I just avoid using the date and just store date dimension (no integers) in fact table.
In this way I will save 5 joints in 5 dimensions of different date.
Note: I have need of these 5 participates in the declaration of model that will be used to create reports, not in the model ETL in dimension model ETL that one date will be there, but we must create on alias the dimension date for each type of report date.
So, I was wondering what is the advantage of using the date dimension?It is more a question of design/statement of a question of ETL/ODI;).
The advantage of the dimension is that you can select or aggregate data by year, weekends, quarter, month, day of the week...
If you only keep the date, you had all these complexes of the formula in logic or calculated items columns (assuming you are using OBIEE). Performances will be affected and the code will be duplicated in many places.Hope that it answers the question.
Jerome
-
Can I use the data dictionary tables based on RLS policy?
Hello guys, I use the package level security line to limit certain lines to some users.
I created several roles, I want to just enable certain roles to see all the columns, but the other roles, I'm not that they see all the lines. I mean to do this I use the session_roles table data dictionary however it did not work.
What to do in order to not allow rows of user roles?
Can I use the data dictionary tables in RLS?
Thank you very much.Polat says:
What to do in order to not allow rows of user roles?
Can I use the data dictionary tables in RLS?Ensure that:
SQL> CREATE OR REPLACE 2 FUNCTION no_sal_access( 3 p_owner IN VARCHAR2, 4 p_name IN VARCHAR2 5 ) 6 RETURN VARCHAR2 AS 7 BEGIN 8 RETURN '''NO_SAL_ACCESS'' NOT IN (SELECT * FROM SESSION_ROLES)'; 9 END; 10 / Function created. SQL> BEGIN 2 DBMS_RLS.ADD_POLICY ( 3 object_schema => 'scott', 4 object_name => 'emp', 5 policy_name => 'no_sal_access', 6 function_schema => 'scott', 7 policy_function => 'no_sal_access', 8 policy_type => DBMS_RLS.STATIC, 9 sec_relevant_cols => 'sal', 10 sec_relevant_cols_opt => DBMS_RLS.ALL_ROWS); 11 END; 12 / PL/SQL procedure successfully completed. SQL> GRANT EXECUTE ON no_sal_access TO PUBLIC 2 / Grant succeeded. SQL> CREATE ROLE NO_SAL_ACCESS 2 / Role created. SQL> GRANT SELECT ON EMP TO U1 2 / Grant succeeded. SQL> CONNECT u1@orcl/u1 Connected. SQL> select ename,sal FROM scott.emp 2 / ENAME SAL ---------- ---------- SMITH 800 ALLEN 1600 WARD 1250 JONES 2975 MARTIN 1250 BLAKE 2850 CLARK 2450 SCOTT 3000 KING 5000 TURNER 1500 ADAMS 1100 ENAME SAL ---------- ---------- JAMES 950 FORD 3000 MILLER 1300 14 rows selected. SQL> connect scott@orcl Enter password: ***** Connected. SQL> GRANT NO_SAL_ACCESS TO U1 2 / Grant succeeded. SQL> connect u1@orcl/u1 Connected. SQL> select ename,sal FROM scott.emp 2 / ENAME SAL ---------- ---------- SMITH ALLEN WARD JONES MARTIN BLAKE CLARK SCOTT KING TURNER ADAMS ENAME SAL ---------- ---------- JAMES FORD MILLER 14 rows selected. SQL>SY.
-
calculate the day of the year using the date.
Hi all
Can calculate us the day of the year using the date form? Is this possible? Please help me thanks in advance
Like this
30/08/2009-30/08/2010 after calculation - 365
Sarah
Published by: SarahSarahSarah on August 30, 2009 12:49 AMSarah.
: ins1.noday must be a part of number!
Create a function in forms like this:
function get_nodays ( f_dtm_start in date, f_dtm_end in date ) return number is begin if f_dtm_start is null OR f_dtm_end is null then return ( null ); end if; return ( trunc ( f_dtm_start ) - trunc ( f_dtm_end ) ); exception when others then message ( sqlerrm || ' in function get_nodays occured.' ); return ( null ); end;Call this function in the when-validate-point triggers on ins1. INSPERIOD and: ins1.end love
:ins1.noday := get_nodays ( :ins1.INSPERIOD, :ins1.end );It is redundant to have the: noday as a cause of part of database
the value may by calculated every time using the values INSPERIOD and: end. -
Using the data binding on each button in a ToggleButtonBar
Can someone tell me if it is possible to use the data binding on the individual buttons in a ToggleButtonBar and, if so, how?
I want to be able to use the data binding for each individual button in the ToggleButtonBar 'enabled' property, but is not possible using MXML because the ToggleButtonBar takes a data provider to display labels for each button and, obviously, I can't set the "enabled" on the values of dataprovider property because they are not objects Button. For example, I'm not allowed to do something like this:
< mx:ToggleButtonBar id = "tbb".
toggleOnClick = 'true '.
itemClick = "clickHandler (event)."
creationComplete = "tbb.selectedIndex = 1" >
< mx:Button label = "A" active = "{...}" / >
< mx:Button label = "B" enabled = "{...}" / >
< mx:Button label = "C" enabled = "{...}" / >
< / mx:ToggleButtonBar >Ah! The ToggleButtonBar. Liaison. MXML. mysterious. Not obvious. But yes, we CAN do...
First, you will need to get the buttons to toggle. Did you know that they are actually ButtonBarButtons? Once you get an instance of each of them, you can do the binding in MXML.Each button LINK below the ViewStack is bound to a ToggleBarButton.
When you click a related button below, the LINK button above it will have its enabled enabled/disabled property. Then a link fires, setting the enabled property of the related ToggleBarButton.This example requires that you know advance how toggle buttons and buttons, you have, so it will not evolve well. Whenever you add a button, you will need to enter hard in the 'getButtons' function, which implements the ButtonBarButton instances. But if you have a known quantity of buttons, no problem.
Maybe you are looking for
-
I have a bit of a problem that does not appear on another computer. I am running Windows 7 and on one of my computers in the office and it is visible in Mozilla Firefox Adobe Flash played being updated and overwhelmed at the same time. I have the lat
-
How can I determine what profile Firefox 5 is currently using?
How can I determine what profile Firefox 5 is currently using?
-
I install Windows XP on a new hardrive unformatted. The installation proceeds without difficulty until I got the message NTLDR is missing and the installation would not be continued. How to install file or fix the problem?
-
HP Deskjet 2540: The printer is offline
Hello world! I have a printer HP Deskjet 2540, which works fine until I bought a new modem WLAN. The old modem Netgear 4 G LTE WLAN S and a new Huawei 4 G WLAN E5377. My computer and tablet work well with this new device, but the printer is not. I tr
-
My laptop model number is Inspiron 7520 15RSE. with i5 processor. and the amd graphics card. I have 4 experience problems in my laptop. 1. whenever I press the power button to turn on my laptop, my screen becomes yellow with a horizontal silver line