Replication of the object - how to propagate objects?

Similar Questions

• Replication of the object read-only?

  Is there a possibility to protect by password, or otherwise put to the replication of the unalterable object similar to the display and publication?

  My concern is that, given total freedom of writeRequestedObject() data, some peers can (voluntarily or not) are used to bad/corrupt data in replication. It will be taken up by others and most replicated. If the data element is part of a larger it itself will be corrupted.

  If there is no way to enforce the read-only, adding a hash of integrity at the end data sounds like a good idea. Receiver will throw the incorrect data and wait for another replica. Which leads to the following question:

  Say a peer is willing to items #1 to #5. When she received #3 a neighbor could this be received again from others until reported (removeWantObjects) that's is more sought or will be the first receive the lock want to #3 and only wait than others. In this case a removeWantObjects followed by addWantObjects will give peer a chance to get a new replica of the #3?

  Thanks for any idea or ideas.

  so that replication of the object to work, everyone in the mesh must be able to NetGroup.writeRequestedObject ().

  in your application logic, you can add integrity checks to the objects (perhaps with a manifesto or a directory that lists the hashes of each object).

  you will not receive an object with a specific index from a peer at a time.  Once you receive the item, its index is removed from your set of envy.  You can perform a check for validity against the object, and if it is not valid, you can re - like it.  at the moment there is no way to blacklist a counterpart of misconduct which gives you damaged data, so you might end up becoming again the same object (corrupt/invalid).

  After receiving an object and determine what it * is * valid, you add it to your game 'a', and then only your neighbors begin to you request for this object.  in this way, only valid objects will be spread across the group.

• Replication of the object - sharing multiple files

  Hi all,

  When file sharing I create the shared file data blocks, then

  call addHaveObjects

  netGroup.addHaveObjects (0, packetLenght);

  where packetLength is the number of actual data segments are split.

  I added headphones for the request and the result

  NetGroup.Replication.Request

  netGroup.writeRequestedObject (event.info.requestID, object.chunks [event.info.index]);

  NetGroup.Replication.Fetch.Result

  in the info.code I would iterate through the pieces and addWantObject(i,i), where i is the current chunk, like that I would add all the pieces to addWantObject

  Problem

  This works very well when sharing file for other peers, but only first time, when I repeat the scenario once more for the same or different, files that nothing happens.

  NetGroup.Replication.Request - is never called

  Source code around, that I follow to recreate the functionality of file sharing can be found at

  http://www.flashrealtime.com/file-share-object-replication-Flash-P2P/

  Index of the object are unique for the Group and they must always point to the same data of the object.

  When you do...

  netGroup.addHaveObjects (0, packetLenght);

  .. you're stating "I have these pieces of information ready to share" the Group
  Your second call with the same parameters have no effect, because you already said that and the group "is already" you have those. given that peers who wanted already they have these recoveries they are no longer needed and NetGroup.Replication.Request is not called again

  For a different file, you must assign a different id for 'startIndex' and 'endIndex' and make sure that beaches overlap ever; given your piece of code, it looks like you always start at 0; in the whole of the group never send different data in the same index of the object

• When you try to upgrade to photos in app store I get this message "the object you requested is not available in the store US." does anyone else have this problem or can you tell me how to find pictures in the app store

  "When you try to upgrade to photos in app store I get this message"the object you requested is not available in the store US."does anyone else have this problem or can you tell me how to find pictures in the app store" someone else meets this.  Is it me or is it pictures?

  Ever photos first? It should have been included when you first update of Yosemite and now El Capitan. I know that iPhotos updates get a message like that, but I didn't know the Photos app with a message with it.

  Update to iPhoto to Photos for OS X - Apple support

• How to view the ADSAccount.displayNamePrintable in the object browser

  We use D1IM Version 6.1.3. If we open the object browser, you open a user account object AD ADSAccount table, we cannot see the value of this object in the attribute "displayNamePrintable. If we develop this attribute in the line 'New' and 'Old' is written the following message:

  «User accounts to active Directory: look at a permission denied for 'Simple view' value.»

  How can I display the value of this attribute in the object browser without the help of the SQL commands?

  Thanks for all replies.

  Have you tried to activate the TargetSystem\ADS\Exchange2000 ConfigParm that should do the trick. Be sure to compile the database after you enable the configuration setting.

• How to recover the object dropped 1 hour ago

  Hi all

  11.2.0.4

  Rhel6.5

  The developer used GUI by accessing the database and informed me that she accidentally dropped and object.

  She didn't know if it was a table or view, or synonym. But she was sure, that she dropped something

  How can I check which object she dropped.

  Thank you very much

  JC

  Hello

  In your case you don't have your trash or flashback on you can't get back the object fell.

  You need to perform a recovery of logical or physical, according to the backup strategy that you have at home.

  Here in your case because users do not know the object abandoned by them then you will need to make a point in time recovery.

  RMAN > run

  {

  allocate channel dev1 type disk;

  until ' to_date ('2015 - 11 - 11:00:00:00 ',' yyyy-mm - dd:hh24:mi:ss');

  restore the database;

  recover the database; }

  here talk about the time when the object was dropped. There will be a loss of data in this case, but again this depends on the criticality of the fall of the user.

  Or you can create an alternative scheme in the test environment by using the logical backup and compare the user_objects objects and their creation on the environment where it was abandoned.

  Ajay

• If I want to hide an object in the back how I would do on the application on my phone?

  If I want to hide an object in the back how I would do on the application on my phone?

  Hi erikag,

  You wouldn't be able to do it on the Mobile with Lightroom application.

  You must use the Lightroom / Photoshop on your computer for such purposes.

• How to make the object move like mice

  I am now getting a... augmented reality project and I used flash to do this system... my system Maker use face detection and the object as a mouse cursor... means the object moves when the face moves in front of the camera... now I can do it... but I can't do this movement of the object in the frame of the flash... move only in the frame... now I would like to ask how I want to object to move out of the frame... like going inside the computer and can click on any folder (average control the computer as mouse). can someone help me?

  You cannot control the mouse of the user outside the flash scene (thankfully), and I don't think you can detect the user with their mouse off the stage with a not installed (that is to say, projector or air) flash application.

• Opens a file someone else you want to resize an object, it is larger that the artboard, how can I get rid of the artboard

  Opens a file someone else you want to resize an object, it is larger that the artboard, how can I get rid of the artboard

  Marvin,

  You can view > hide the work plan, but why not just put to adapt to what you want?

  You can do this in the file > format Document, or with the tool of workplan according to version.

• (1) now I use Lightrom 5.7 How to level 6 or CC? (2) what is the difference between the 6 and CC vercion? (3) when I used lightromm 3, inEXIF the distance in metres to the object that I took, in the virsions later that the function has disappeared, I coul

  (1) now I use Lightrom 5.7 How to level 6 or CC?

  (2) what is the difference between the 6 and CC version?

  (3) when I used lightromm 3, I could see in EXIF distance in metres to the object that I took, in the virsions later that the function is missing, it is very sad I am stiil waiting and I hope it would be possibble in new versions. Or this indication may possible by setting?

  (1) now I use Lightrom 5.7 How to level 6 or CC?

  Buy the standalone update from here: products

  Download CC version here: Adobe explore desktop apps | Adobe Creative Cloud

  (2) what is the difference between the 6 and CC version?

  See this comparison chart: Lightroom compare versions. Adobe Photoshop Lightroom CC

  (3) when I used lightromm 3, I could see in EXIF distance in metres to the object that I took, in the virsions later that the function is missing, it is very sad I am stiil waiting and I hope it would be possibble in new versions. Or this indication may possible by setting?

  Plugin ExifMeta of Rob Cole displays the distance between the subject field (and much more).  Unfortunately, his Web site seems to be down again.  He has been very active here, but he has not posted in several months.

• How to access the Non-space data of the object using the API of the HTML5

  Using the Oracle cards HTML5 API, is it possible to access the data an excerpt when generating a map?

  For example, my database has a table named ITEMS:

  Table: ELEMENTS

  COL_A

  COL_B

  COL_C

  COL_D

  COL_E

  COL_F

  GEOMETRY

  This table contains a number of objects point.  With the help of Mapviewer, I can successfully create a map by using the HTML5 API.  Here is an example of how I used the constructor 'OM.layer.VectorLayer.TYPE_JDBC' to retrieve the objects point of my database.

  pointLayer = new OM.layer.VectorLayer ("PointLayer",

  {

  infoWindow: true,

  def:

  {

  type: OM.layer.VectorLayer.TYPE_JDBC,.

  dataSource: "myDatabase",.

  SQL: "SELECT * FROM POINT."

  geometryColumn: "GEOMETRY."

  labelColumn: "COL_A."

  loadOnDemand: false,

  URL: baseURL

  },

  renderingStyle: circleMarker

  });

  How can I use the HTML5 API to access the data in the other columns (COL_A, COL_B, etc.) of my table?

  I know that the methods DisplayInfoWindow() and displayTabbedInfoWindow of the Map class to view this information by clicking on a specific point on the map.  But I would like to have access to all the points to create a table below my map showing all points (and their data) shown on the map.

  Hello

  You can try this code:

  functions var = pointLayer.getAllFeatures ();

  for (var i = 0; i)

  {

  Features [i]. GetAttributes() ["COL_A"];

  Features [i]. GetAttributes() ["COL_B"];

  ......

  }

• How to hide the objects in the scene?

  Hello

  I just started a course on internet on Flash. The second job is to create a banner ad animated 720 x 90. When I test the movie in Flash Professional still show the objects that I got off the stage.

  I want to start an object outside of the scene on one side and have it go around and out the other side.

  How can I just show what stage?

  I use the CS5 version.

  Thank you

  In your settings, you can choose to publish an HTML as the output of publication.  When you use this page, what it does is that it loads the swf file in the web page, so you must have the SWF with the html page.

  I have a correction of a typo in my original answer... the first sentence should say "without the use of html with the code.  I thought it was what I typed, but I see that I made a mistake.

• The knife tool develops a black line on the objects that I colored using the live paint bucket. How to get the tool knife to stop this and instead of being invisible?

  The knife tool develops a black line on the objects that I colored using the live paint bucket. How to get the tool knife to stop this and instead of being invisible?

  I understand that it is a live paint object you use.

  Try this:

  

• How can I customize the object of a hyperlink email

  How can I customize the object of a hyperlink email? I added a hyperlink to an image. I want to click, a new message of pop e-mail filled up with a topic already personalized.

  hyperlink would be

  topic of mailto:youremailaddress?subject=email here

• "Assignment of a top layer of the object on the master" (master page numbers) I understand the layer must be up to show above images placed on the pages, but how can I do this?

  I have added page numbers to my master pages. They appear on the pages, but I have images on the individual pages which cover the numbers. I understand that I must assign a top layer of the object, but I don't understand how to do it. Please help me? Please explain a just clear as possible, I read the other replies but still do not understand. Wish it was as simple as select object, do a right-click, edit the layer!

  Thank you very much!

  1. open the layers panel (window > layers)

  2. in the control panel menu, choose new layer. In the dialog box, you can name the layer if you like Page numbers.

  3. on your main page, select the text block with the selection tool (black arrow tool) page numbers.

  4. If you now look at the layers panel, you will see a small square right of one of your layers (or 1 layer if you have not created any new layers). Drag instead of the layer of Page numbers. [Explanation: the square is a "proxy" for the selected objects.] [Drag to the other layer moves the objects on this layer.]

  Good luck!