Replication of the object read-only?
Is there a possibility to protect by password, or otherwise put to the replication of the unalterable object similar to the display and publication?
My concern is that, given total freedom of writeRequestedObject() data, some peers can (voluntarily or not) are used to bad/corrupt data in replication. It will be taken up by others and most replicated. If the data element is part of a larger it itself will be corrupted.
If there is no way to enforce the read-only, adding a hash of integrity at the end data sounds like a good idea. Receiver will throw the incorrect data and wait for another replica. Which leads to the following question:
Say a peer is willing to items #1 to #5. When she received #3 a neighbor could this be received again from others until reported (removeWantObjects) that's is more sought or will be the first receive the lock want to #3 and only wait than others. In this case a removeWantObjects followed by addWantObjects will give peer a chance to get a new replica of the #3?
Thanks for any idea or ideas.
so that replication of the object to work, everyone in the mesh must be able to NetGroup.writeRequestedObject ().
in your application logic, you can add integrity checks to the objects (perhaps with a manifesto or a directory that lists the hashes of each object).
you will not receive an object with a specific index from a peer at a time. Once you receive the item, its index is removed from your set of envy. You can perform a check for validity against the object, and if it is not valid, you can re - like it. at the moment there is no way to blacklist a counterpart of misconduct which gives you damaged data, so you might end up becoming again the same object (corrupt/invalid).
After receiving an object and determine what it * is * valid, you add it to your game 'a', and then only your neighbors begin to you request for this object. in this way, only valid objects will be spread across the group.
Tags: Adobe
Similar Questions
-
Replication of the object - how to propagate objects?
Given the following scenario:
A, B, C are peer
A - B are connected
B - C are connected
A - C are NOT connected
A #1 object
C wants to object #1
B (if any) will pass the object of A to C, or nothing will happen except changing the topology?
Thank you.
so that C get the #1 object, B must get first. B must wish that object #1 that he asked it to A, and then send it to you. Once B receives the object, he must indicate he did. Once B has #1, C go see it and ask B.
replication of the object works only if everyone in the group is making efforts to have all the clues, and they share the clues they have.
-
How can I change the attributes read-only or system files?
How can I change the attributes read-only or system files?
To view or to remove the read-only or system attributes, use the Attrib command at a command prompt:
1. click the Start button, type cmd in the search box and press ENTER.
2. to view the syntax for the Attrib command, Type attrib------? at the command prompt.
WARNING: If you remove the read-only or a file system attribute, it may seem like a regular folder and some customizations may be lost. For example, Windows customizes the Fonts folder and provides a special folder view that allows you to hide variations, such as bold and italics. It also allows you to change the display settings of the file in a way that is specific to fonts. If you remove the read-only attributes and the Fonts folder system, these custom display settings not available. For folders that you have customized by using the tab, customize the folder properties dialog box, the folder icon and other other customizations may be lost when you remove the read-only attribute.
If a program cannot save files to a folder with read-only, such as My Documents, change the read-only to the system attribute by using the Attrib command at a command prompt.
To remove the read-only attribute and to set the system attribute, use the following command:
attrib - r + s drive:------
------. For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command: attrib - r + s c:\test
Be aware that some programs may not work correctly with folders for which the read-only attribute and the system attribute are granted. You can use the following command to remove these attributes:
attrib - r-s c:\test
-
JavaScript to make the fields to fill in the form read-only?
How the fields to fill out my form read-only? I created the form, send to clients. Clients fill out the fields and click the submit button. The submit button pulls an automatically generated email and send the pdf file. I want the pdf file to send with the fields read-only. How then?
This code should do the trick:
for (var i=0; i
-
Select the property read only question to cross the field validation
I've created two elements on a page and they are named P47_REQUEST_SOURCE_KEY (RSK) and P47_REQUEST_SOURCE_OTHER (RSO). I want to do SAR conditionally read-only based on the value of the RSK. BSR, here is a list of selection based on a LOV and RSO is a text field. I want RSO read-only unless the Serbian Republic of Krajina is equal to 'other '. I've experimented with read-only Condition Type value of ' expression element 1 is! exepression2 =', P47_REQUEST_SOURCE_KEY and expression expression1 two "other". (The value of the key stored in the LOV is 'OTHER' but the display value is 'Other'). I also tried the ' text in expression1. = to exepression2 with various permutations of expression1 and expression2.
How do RSOcolumn condition that the content in the Serbian Republic of Krajina? No matter what I put the values in the properties read-only which is always read-only even when the value of the RSK is "other". Any ideas what I am doing wrong
Thank you, NedHello
You can try to javascript
Place it in the HTML page headerThis page HTML Body
onload="disRSO();"
And then point the Form HTML P47_REQUEST_SOURCE_KEY element attributes
onchange="disRSO();"
Hope this helps
BR, Jari
-
How to make a part of the BLOB read-only?
Hi all
I need to open a word document saved in the database read-only. It is for the user manuals. I got the code, its working very well... But I need to open the word read-only document. How do I do that? A way to make the POINT of BLOB read-only?
The structure of the table is as follows.
ANNUAL NOT NULL NUMBER (5)
NAME VARCHAR2 (128)
BLOB OF DOC
DOC_NAME VARCHAR2 (50)
Thanks in advance,
NycyHello
What do you mean by 'read only '?
If you don't want to store any subsequent end-user, do not save this return to the database after you display.François
-
Is this a bug? HTML is not escaped in the conditional read only LOV page elements
Then test my application for injection HTML filling HTML for each column in my data injected datamodel HTML running when a field only LOV ready, I noticed
I have dynamic LOV in use in my form, so their share, users can select. That sometimes I don't want to make them able to change a value, they chose earlier.
For this reason I condtionalu readonly my LOV. by using the conditional read only an option for the items on the page.
That's when a dynamic LOV made readonly HTML code inside is done instead of escaped
is this a bug or is it intentional?
At least, I think I should be able to choose the behavior.
GeertGeert - Thanks for the info. I think that's not a bug. With the read-only option, it displays the data as it would for a display text (does not save the State) items for which source of HTML element, that is, unescaped. If you want the text escaped by using your dynamic lov query simply use htf.escape_sc:
Select htf.escape_sc ('
data ') d, 1 r of the doubleScott
-
How to add the transient attribute for LOV (object of the view read-only)
I have a view called CustomerView and attribute DepartmentId is present in it.
Also exists DepartmentView and CustomerView.DepartmentId has an LOV from this point of view.
I need to add a transient attribute to CustomerView which express the DepartmentName attribute in the LOV.
Because of the view are read-only there is no entity object don't match them.
How can I write the groovy for the transitional object expression.
The name of the view accessor Lov's DepartmentView1
Looking for your help. Thank you.
Hi gcoban
I do not understand your question correctly,
you are not able to write to the expression property in viewObject?
or you want to know how to write groovy for that?
for writing groovy you need viewAccessor and you who have, you can try as Alejandro Tovar Lanz suggested
or you can write code in RowImpl to fill in the name of the Ministry of the accessor
See -https://blogs.oracle.com/adf/entry/combo_lov_how_to_display
Thank you
-
Make the form read-only if a field is filled
Is there a way to do an entire form read-only if a certain text field is filled? I know that adding a digital signature to a form field, increases the size of the screen, so I prefer not to add a digital signature field in my form. However, I would like the feature that says after the form is signed, it is read-only. I have added a text box to the form and tried to add a script that read: if (this.rawValue! = "") (this.access = "readOnly"), but it did not work. Is there a way I can accomplish this without adding a signature to the form field?
Hello
It depends on where you have placed the script, probably the best place is the exit event.
if (this.rawValue != null || this.rawValue != "") { this.access = "readOnly"; } else { this.access = "open"; }
It blocks only the field that the script is inside.
You should check the example of Paul LockAllFields, which contains a function in a script object. Whereas Paul calls it a click to a button event, you could call it the output of the particular text field event.
Re: Save form non-fillable PDF
Hope that helps,
Niall
-
Replication of the object - sharing multiple files
Hi all,
When file sharing I create the shared file data blocks, then
call addHaveObjects
netGroup.addHaveObjects (0, packetLenght);
where packetLength is the number of actual data segments are split.
I added headphones for the request and the result
NetGroup.Replication.Request
netGroup.writeRequestedObject (event.info.requestID, object.chunks [event.info.index]);
NetGroup.Replication.Fetch.Result
in the info.code I would iterate through the pieces and addWantObject(i,i), where i is the current chunk, like that I would add all the pieces to addWantObject
Problem
This works very well when sharing file for other peers, but only first time, when I repeat the scenario once more for the same or different, files that nothing happens.
NetGroup.Replication.Request - is never called
Source code around, that I follow to recreate the functionality of file sharing can be found at
http://www.flashrealtime.com/file-share-object-replication-Flash-P2P/
Index of the object are unique for the Group and they must always point to the same data of the object.
When you do...
netGroup.addHaveObjects (0, packetLenght);
.. you're stating "I have these pieces of information ready to share" the Group
Your second call with the same parameters have no effect, because you already said that and the group "is already" you have those. given that peers who wanted already they have these recoveries they are no longer needed and NetGroup.Replication.Request is not called againFor a different file, you must assign a different id for 'startIndex' and 'endIndex' and make sure that beaches overlap ever; given your piece of code, it looks like you always start at 0; in the whole of the group never send different data in the same index of the object
-
Set the mail read-only account
I have a shared corporate email account that I use for the read-only.
I'm not supposed to use that account to send emails, but have had a few close encounters.
Is it possible in the e-mail settings that I can put an account to "read only"? I won't be able to write, move or remove anything through the mail application.
This method would be much safer double checking each email before I send, sometimes I have to email very quickly and forget to double check.
It is not a 'read only' option for e-mail accounts, but you can set the SMTP to zero. SMTP Simple Mail Transfer Protocol, but what it does is Send Mail To People.
Mail-> Preferences-> accounts-> account information
-
Cannot change the expression - read-only
I have a problem as some of the steps in my sequence of the expression has become read-only. This has happened on and off the power for awhile on several machines, the job is to create a new step copy the expression and remove the old stage. I did once see a message something is set to 'read only', but I couldn't find where to disable it.
I can always change to another part of the stage, in the properties-> Expressions pre and status windows are white and I can change them, the expression post window is gray and cannot be changed. The expression tab is the same, gray and read-only.
TestStand 2012, that step is now a function f (x), don't know if it's always the case.
I searched here and find only very old posts that sugest that the problem is solved in 2012.
TS is considered to be a well hidden. You can view the properties hidden in the Preferences of the Station Options tab.
Looks like your sequence files are INI format, then you might be able to fix it in a text editor. Open the movie file in a text editor and locate the steps in question. They are listed in order of their index position (e.g. "[SF. SEQ [0]. Hand [2]. TS]"), or you can use their stage names or IDs to find. In the steps that you want to modify, delete the line ' % FLG: PostExpr = 1 "to reset the indicators of the property to 0.
You can try to generate checksums before and after copying the file in sequence to check if the file is actually change. You can also try saving the file in the sequence in binary format or XML instead of INI.
-
Cannot delete the files read-only on display
Hello
I copied files from my PC to the view, but when they were on the PC, they were marked read-only. Now, I found that I can't remove them from the sandisk as it says that they are read-only.
How do I change the properties of the files so I can delete them?
Thanks for any help!
Worto.
I format the device if these files take up a lot of space, then resyn or copy the data (do not read that things) on the device. Be sure to back up all data you want to save the device before formatting.
The format option is in the settings menu system.
-
Why my computer continues to change the file read-only after I have untick
I just had a Virus go through my computer and I cleaned it, then my computer shows I lost all my information, but I know that I have not because I still programs and background even though I've been there and opened a few folders to see if the files are hidden it turns out they were, but the box that says hide has not been verified , so I corrected the hidden problem but now the computer keeps the read-only check box and everytime I try to uncheck once I apply then click ok, it re check it self and I don't really know how to fix this... Please help
Hi Cameron_513,
Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
Diagnose and repair Windows files and folders problems automatically
Difficulty of broken desktop shortcuts and common system maintenance tasksNote: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.
Method 2: follow the steps described in the article below to restore the security settings and then check if it makes a difference.
How to restore the security settings to a known working state?
http://support.Microsoft.com/kb/313222
Method 3: Run Microsoft Security scanner (MSS) to remove the infections of vestige of the computer
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: Infected files can be deleted from your computer; There is a chance of data loss.
-
I use Win 7 64 and recently all my files have begun to show read-only. Other responses on this forum, which suggests to change the read-only via the Properties dialog box, attrib command did not work. In addition, I created a new administrator account as suggested by another answer, but the problem persists on both accounts.
Several programs will not work now that they can not write files in folders.
What can I do to fix this?
Hello
See the following article for a description of this problem.
I hope this helps.
Thank you for using Windows 7
Ronnie Vernon MVP
Maybe you are looking for
-
I wonder if El Capitan had all problems solved now. Should I upgrade? Is there any application that might not work? It comes to my iMac.
-
Removal of noise from working in Skype 7.2 Realtek?
Skype Realtek Noise Suppression is unclear or can I finally spend v6?
-
I can't connect using the password I created
I bought my kids a touchsmart 520 for Christmas with windows 7 installed, which was installed by my son and it was YouTube that day. The next day he tried to connection and the message that the password is not recognized I tried to reset and it asks
-
My windows Explorer hangs in almost all operations
See this thread if it helps: Windows Explorer crashes when delete or rename files http://www.Vistax64.com/Vista-General/32058-Windows-Explorer-hangs-when-deleting-renaming-files.html#post890328 My windows Explorer hangs in almost all operations. I
-
How to play songs in alphabetical order?
Probably a stupid question, but I look for the answer... I have a 2 GB Clip + (8GB MicroSD added on) and I have about 900 songs on the card. I use mp3tag to mark up artist, title and Album (with year, track, Genre and comment empty). I put the album